Ecological aspects of mosquitoes (Diptera: Culicidae) in the gallery forest of Brasilia National Park, Brazil, with an emphasis on potential vectors of yellow fever

Introduction We analyzed the vertical and monthly distributions of culicid species in the gallery forest of Brasília National Park, with an emphasis on the potential vectors of yellow fever (YF). Methods Between September 2010 and August 2011, mosquitoes were captured on the ground and in the canopy of the forest for five consecutive days per month, from nine to 15 hours. The mosquitoes were examined to verify natural infection with flaviviruses by isolation in Aedes albopictus Skuse, 1864 cells followed by indirect immunofluorescence. Results We identified 2,677 culicids distributed in 29 species. Most of the mosquitoes were captured at ground level (69%) during the rainy season (86%). The most abundant species were Sabethes (Sabethes) albiprivus Theobald, 1903; Limatus durhamii Theobald, 1901; Haemagogus (Conopostegus) leucocelaenus Dyar & Shannon, 1924; Haemagogus (Haemagogus) janthinomys Dyar, 1921; Aedes (Ochlerotatus) scapularis Rondani, 1848; Psorophora (Janthinosoma) ferox Von Humboldt, 1819; and Aedes (Ochlerotatus) serratus Theobald, 1901. Limatus durhamii, Limatus durhamii, Psorophora ferox, Aedes scapularis and Aedes serratus showed significant differences (p<0.05) in their habitat use. Limatus durhamii was found more often in the canopy, unlike the other species. During the rainy season, the most abundant species were Sa. albiprivus, Haemagogus leucocelaenus and Limatus durhamii. During the dry season, the potential YF vectors exhibited a very low frequency and abundance, except Aedes scapularis and Aedes serratus. No flavivirus was detected in the 2,677 examined mosquitoes. Conclusions We recommend continued and systematic entomological monitoring in areas vulnerable to the transmission of YF in the Federal District of Brazil.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

Ecological competition and the incidence of Acinetobacter baumannii bloodstream infections in a teaching hospital in Southeastern Brazil

IntroductionRecently, pathogen ecology has been recognized as an important epidemiological determinant of healthcare-associated infections (HAIs). Acinetobacter baumannii is one of the most important agents known to cause HAIs. It is widespread in healthcare settings and exhibits seasonal variations in incidence. Little is known about the impact of competition with other hospital pathogens on the incidence of A. baumannii infection.MethodsWe conducted an ecological study, enrolling patients who presented with healthcare-associated bloodstream infections (HA-BSIs) from 2005 to 2010 at a 450-bed teaching hospital in Brazil. HA-BSIs were said to be present when bacteria or fungi were recovered from blood cultures collected at least three days after admission. Monthly incidence rates were calculated for all HA-BSIs (overall or caused by specific pathogens or groups of pathogens). Multivariate Poisson regression models were used to identify the impacts of the incidence of several pathogens on the incidence of A. baumannii.ResultsThe overall incidence rate of HA-BSI caused by A. baumannii was 2.5 per 10,000 patient-days. In the multivariate analysis, the incidence of HA-BSI caused by A. baumanniiwas negatively associated with the incidence rates of HA-BSI due to Staphylococcus aureus (rate ratio [RR]=0.88; 95% confidence interval [CI]=0.80-0.97), Enterobacter spp. (RR=0.84; 95%CI=0.74-0.94) and a pool of less common gram-negative pathogens.ConclusionsOur results suggest that competition between pathogens influences the etiology of HA-BSIs. It would be beneficial to take these findings into account in infection control policies.

Occurrence of severe dengue in Rio de Janeiro: an ecological study

Introduction This study aimed to analyze the relationship between the incidence of severe dengue during the 2008 epidemic in Rio de Janeiro, Brazil, and socioeconomic indicators, as well as indicators of health service availability and previous circulation of the dengue virus serotype-3 (DENV-3). Methods In this ecological study, the units of analysis were the districts of Rio de Janeiro. The data were incorporated into generalized linear models, and the incidence of severe dengue in each district was the outcome variable. Results The districts with more cases of dengue fever in the 2001 epidemic and a higher percentage of residents who declared their skin color or race as black had higher incidence rates of severe dengue in the 2008 epidemic [incidence rate ratio (IRR)= 1.21; 95% confidence interval (95%CI)= 1.05-1.40 and IRR= 1.34; 95%CI= 1.16-1.54, respectively]. In contrast, the districts with Family Health Strategy (FHS) clinics were more likely to have lower incidence rates of severe dengue in the 2008 epidemic (IRR= 0.81; 95%CI= 0.70-0.93). Conclusions At the ecological level, our findings suggest the persistence of health inequalities in this region of Brazil that are possibly due to greater social vulnerability among the self-declared black population. Additionally, the protective effect of FHS clinics may be due to the ease of access to other levels of care in the health system or to a reduced vulnerability to dengue transmission that is afforded by local practices to promote health.

Implementation of membrane processes for improvement of the detection of food contaminants

The EM3E Master is an Education Programme supported by the European Commission, the European Membrane Society (EMS), the European Membrane House (EMH), and a large international network of industrial companies, research centres and universities (http://www.em3e.eu)

A decision- theoretic model for M&A sale processes

A Work Project, presented as part of the requirements for the Award of a Masters Double Degree in Economics and International Business from the NOVA – School of Business and Economics and Insper Instituto de Ensino e Pesquisa

Distributional and ecological notes on Polygonanthus amazonicus Ducke

Polygonanthus amazonicus Ducke já foi incorporada em oito famílias diferentes, mas era conhecida de apenas uma árvore desde a primeira coletada em 1929. Uma excursão do projeto Flora Amazônica comprovou sua área de ocorrência, que é de pelo menos 17.500 km2 na região compreendida entre Maués e Borba no Estado do Amazonas. Seu habitat e provável meio de dispersão são descritos. o caso desta e de muitas outras espécies com escassa representação nos herbários demonstra a necessidade de se manter um intenso programa de coleta botânica para se manter uma base mais realista da distribuição de muitas espécies.

Engineering bio-based polymers using alternative solvents and processes

The work presented in this thesis explores novel routes for the processing of bio-based polymers, developing a sustainable approach based on the use of alternative solvents such as supercritical carbon dioxide (scCO2), ionic liquids (ILs) and deep eutectic solvents (DES). The feasibility to produce polymeric foams via supercritical fluid (SCF) foaming, combined with these solvents was assessed, in order to replace conventional foaming techniques that use toxic and harmful solvents. A polymer processing methodology is presented, based on SCF foaming and using scCO2 as a foaming agent. The SCF foaming of different starch based polymeric blends was performed, namely starch/poly(lactic acid) (SPLA) and starch/poly(ε-caprolactone) (SPCL). The foaming process is based on the fact that CO2 molecules can dissolve in the polymer, changing their mechanical properties and after suitable depressurization, are able to create a foamed (porous) material. In these polymer blends, CO2 presents limited solubility and in order to enhance the foaming effect, two different imidazolium based ILs (IBILs) were combined with this process, by doping the blends with IL. The use of ILs proved useful and improved the foaming effect in these starch-based polymer blends. Infrared spectroscopy (FTIR-ATR) proved the existence of interactions between the polymer blend SPLA and ILs, which in turn diminish the forces that hold the polymeric structure. This is directly related with the ability of ILs to dissolve more CO2. This is also clear from the sorption experiments results, where the obtained apparent sorption coefficients in presence of IL are higher compared to the ones of the blend SPLA without IL. The doping of SPCL with ILs was also performed. The foaming of the blend was achieved and resulted in porous materials with conductivity values close to the ones of pure ILs. This can open doors to applications as self-supported conductive materials. A different type of solvents were also used in the previously presented processing method. If different applications of the bio-based polymers are envisaged, replacing ILs must be considered, especially due to the poor sustainability of some ILs and the fact that there is not a well-established toxicity profile. In this work natural DES – NADES – were the solvents of choice. They present some advantages relatively to ILs since they are easy to produce, cheaper, biodegradable and often biocompatible, mainly due to the fact that they are composed of primary metabolites such as sugars, carboxylic acids and amino-acids. NADES were prepared and their physicochemical properties were assessed, namely the thermal behavior, conductivity, density, viscosity and polarity. With this study, it became clear that these properties can vary with the composition of NADES, as well as with their initial water content. The use of NADES in the SCF foaming of SPCL, acting as foaming agent, was also performed and proved successful. The SPCL structure obtained after SCF foaming presented enhanced characteristics (such as porosity) when compared with the ones obtained using ILs as foaming enhancers. DES constituted by therapeutic compounds (THEDES) were also prepared. The combination of choline chloride-mandelic acid, and menthol-ibuprofen, resulted in THEDES with thermal behavior very distinct from the one of their components. The foaming of SPCL with THEDES was successful, and the impregnation of THEDES in SPCL matrices via SCF foaming was successful, and a controlled release system was obtained in the case of menthol-ibuprofen THEDES.

Unilever food solutions new digital CRM platform- what is the combination of tools, processes and content that will help Unilever food solutions grow his business?

Unilever Food Solutions new digital CRM1 Platform - What is the combination of tools, processes and content that will help Unilever Food Solutions grow his business? Unilever Food Solutions (UFS) intend to create a new online platform to enable it to communicate with segments of the markets, which have previously been too difficult to reach. Specifically targeted at Chefs and other food professionals, the aim is to create an interactive website, which delivers value to its intended users by providing a variety of relevant content and functions, while simultaneously opening up a potential transactional channel to those same users.

Nutritional plasticity and evolutionary divergence in the Drosophila ovary

The environment can modify developmental trajectories and generate a range of distinct phenotypes without altering an organism’s genome, a widespread phenomenon called developmental plasticity. The past decades have seen a resurgent interest in understanding how developmental plasticity contributes to evolutionary processes, as it can produce phenotypic variation among individuals and facilitate diversification among populations that inhabit distinct ecological niches. To better understand the importance of plastic responses for evolutionary change, we need to explore how the environment alters development to produce phenotypic variation and then compare this to how genetic variation influences these same developmental processes.(...)

Assessment of national parks affected by naturbanization processes in Southern Europe

This paper assesses land-use changes related to naturbanization processes on three biosphere reserves in Southern Europe. A comparative analysis has been done on the National Parks in Peneda-Ger^es in North Portugal, C_evennes in South France and Sierra Nevada in South Spain, using Corine Land Cover data from 1990 until 2006. Results indicate that the process of land-use intensification is taking place in the frame of naturbanization dynamics that could jeopardize the role of Protected Areas. Focusing on the trends faced by National Parks and their surrounding territories, the analysis demonstrates, both in quantitative and spatial terms, the intensification processes of land-use changes and how it is important to know them for coping with increasing threats. The article concludes that in the current context of increasing stresses, a broader focus on nature protection, encompassing the wider countryside, is needed if the initiatives for biodiversity protection are to be effective.

Using relational algebra on the specification of real world ETL processes

Modeling Extract-Transform-Load (ETL) processes of a Data Warehousing System has always been a challenge. The heterogeneity of the sources, the quality of the data obtained and the conciliation process are some of the issues that must be addressed in the design phase of this critical component. Commercial ETL tools often provide proprietary diagrammatic components and modeling languages that are not standard, thus not providing the ideal separation between a modeling platform and an execution platform. This separation in conjunction with the use of standard notations and languages is critical in a system that tends to evolve through time and which cannot be undermined by a normally expensive tool that becomes an unsatisfactory component. In this paper we demonstrate the application of Relational Algebra as a modeling language of an ETL system as an effort to standardize operations and provide a basis for uncommon ETL execution platforms.

Advances in thermoplastic pultruded composites

Pultrusion is a versatile continuous high speed production technology allowing the production of fibre reinforced complex profiles. Thermosetting resins are normally used as matrices in the production of structural constant cross section profiles. Although only recently thermoplastic matrices have been used in long and continuous fibre reinforced composites replacing with success thermosetting matrices, the number of their applications is increasing due to their better ecological and mechanical performance. Composites with thermoplastic matrices offers increased fracture toughness, higher impact tolerance, short processing cycle time and excellent environmental stability. They are recyclable, post-formable and can be joined by welding. The use of long/continuous fibre reinforced thermoplastic matrix composites involves, however, great technological and scientific challenges since thermoplastics present much higher viscosity than thermosettings, which makes much difficult and complex the impregnation of reinforcements and consolidation tasks. In this work continuous fibres reinforced thermoplastic matrix towpregs were produced using equipment developed by the Institute for Polymers and Composites (IPC). The processing of the towpregs was made by pultrusion, in a developed prototype equipment existing in the Engineering School of the Polytechnic Institute of Porto (ISEP). Different thermoplastic matrices and fibres raw-materials were used in this study to manufacture pultruded composites for commercial applications (glass and carbon fibre/ polypropylene) and for advanced markets (carbon fibre/Primospire®). To improve the temperature distribution profile in heating die, different modifications were performed. In order to optimize both processes, towpregs production and pultruded composites profiles were analysed to determine the influence of the most relevant processing arameters in the final properties. The final pultruded composite profiles were submitted to mechanical tests to obtain the relevant properties.

Improvign mixing processes with the help of numerical tools

In several industrial applications, highly complex behaviour materials are used together with intricate mixing processes, which difficult the achievement of the desired properties for the produced materials. This is the case of the well-known dispersion of nano-sized fillers in a melt polymer matrix, used to improve the nanocomposite mechanical and/or electrical properties. This mixing is usually performed in twin-screw extruders, that promote complex flow patterns, and, since an in loco analysis of the material evolution and mixing is difficult to perform, numerical tools can be very useful to predict the evolution and behaviour of the material. This work presents a numerical based study to improve the understanding of mixing processes. Initial numerical studies were performed with generalized Newtonian fluids, but, due to the null relaxation time that characterize this type of fluids, the assumption of viscoelastic behavior was required. Therefore, the polymer melt was rheologically characterized, and, a six mode Phan-Thien-Tanner and Giesekus models were used to fit the rheological data. These viscoelastic rheological models were used to model the process. The conclusions obtained in this work provide additional and useful data to correlate the type and intensity of the deformation history promoted to the polymer nanocomposite and the quality of the mixing obtained.