Gold Ores Related to Shear Zones, West Santa Comba Fervenza Area (Galicia, NW Spain): A Mineralogical Study

Recent research has discovered high-grade Au ores in NNE-SSW trending shear zones in metamorphic proterozoic and palaeozoic terranes, some 40 km NW of Santiago de Compostela (NW Spain). The orebodies are bound to late-stage Hercynian structures, mainly due to brittle deformation, which are superimposed on earlier ductile shear zones, cutting through various catazonal lithologies, including ortho- and paragneisses, amphibolites, eclogites, and granites. Ore mineralogy, alteration, and ore textures define a frame whose main features are common to all prospects in the area. Main minerals are arsenopyrite and pyrite - accompanied by quartz, adularia, sericite, + (tourmaline, chlorite, carbonates, graphite), as main gangue minerals - with subordinate amounts of boulangerite, bismuthinite, kobellite, jamesonite, chalcopyrite, marcasite, galena, sphalerite, rutile, titanite, scheelite, beryl, fluorite, and minor native gold, electrum, native bismuth, fahlore, pyrrhotite, mackinawite, etc., defining a meso-catathermal paragenesis. Detailed microscopic study allows the author to propose a general descriptive scheme of textural classification for this type of ore. Most of the ores fill open spaces or veins, seal cracks or cement breccias; disseminated ores with replacement features related to alteration (mainly silicification, sericitization, and adularization) are also observed. Intensive and repeated cataclasis is a common feature of many ores, suggesting successive events of brittle deformation, hydrothermal flow, and ore precipitation. Gold may be transported and accumulated in any of these events, but tends to be concentrated in later ones. The origin of the gold ores is explained in terms of hydrotherreal discharge, associated with mainly brittle deformation and possibly related to granitic magmas, in the global tectonic frame of crustal evolution of West Galicia. The mineralogical and textural study suggests some criteria which will be of practical value for exploration and for ore processing. Ore grades can be improved by flotation of arsenopyrite. Non-conventional methods, such as pressure or bacterial leaching, may subsequently obtain a residue enriched in gold.

Estrategias de monitorización de CO2 y otros gases en los estudios de análogos naturales

La Universidad Politécnica de Madrid (UPM) y la Università degli Studi di Firenze (UniFi), bajo la coordinación técnica de AMPHOS21, participan desde 2009 en el proyecto de investigación “Estrategias de Monitorización de CO2 y otros gases en el estudio de Análogos Naturales”, financiado por la Fundación Ciudad de la Energía (CIUDEN) en el marco del Proyecto Compostilla OXYCFB300 (http://www.compostillaproject.eu), del Programa “European Energy Program for Recovery - EEPR”. El objetivo principal del proyecto fue el desarrollo y puesta a punto de metodologías de monitorización superficiales para su aplicación en el seguimiento y control de los emplazamientos donde se realice el almacenamiento geológico de CO2, analizando técnicas que permitan detectar y cuantificar las posibles fugas de CO2 a la atmósfera. Los trabajos se realizaron tanto en análogos naturales (españoles e italianos) como en la Planta de Desarrollo Tecnológico de Almacenamiento de CO2 de Hontomín. Las técnicas analizadas se centran en la medición de gases y aguas superficiales (de escorrentía y manantiales). En cuanto a la medición de gases se analizó el flujo de CO2 que emana desde el suelo a la atmósfera y la aplicabilidad de trazadores naturales (como el radón) para la detección e identificación de las fugas de CO2. En cuanto al análisis químico de las aguas se analizaron los datos geoquímicos e isotópicos y los gases disueltos en las aguas de los alrededores de la PDT de Hontomín, con objeto de determinar qué parámetros son los más apropiados para la detección de una posible migración del CO2 inyectado, o de la salmuera, a los ambientes superficiales. Las medidas de flujo de CO2 se realizaron con la técnica de la cámara de acúmulo. A pesar de ser una técnica desarrollada y aplicada en diferentes ámbitos científicos se estimó necesario adaptar un protocolo de medida y de análisis de datos a las características específicas de los proyectos de captura y almacenamiento de CO2 (CAC). Donde los flujos de CO2 esperados son bajos y en caso de producirse una fuga habrá que detectar pequeñas variaciones en los valores flujo con un “ruido” en la señal alto, debido a actividad biológica en el suelo. La medida de flujo de CO2 mediante la técnica de la cámara de acúmulo se puede realizar sin limpiar la superficie donde se coloca la cámara o limpiando y esperando al reequilibrio del flujo después de la distorsión al sistema. Sin embargo, los resultados obtenidos después de limpiar y esperar muestran menor dispersión, lo que nos indica que este procedimiento es el mejor para la monitorización de los complejos de almacenamiento geológico de CO2. El protocolo de medida resultante, utilizado para la obtención de la línea base de flujo de CO2 en Hontomín, sigue los siguiente pasos: a) con una espátula se prepara el punto de medición limpiando y retirando el recubrimiento vegetal o la primera capa compacta de suelo, b) se espera un tiempo para la realización de la medida de flujo, facilitando el reequilibrio del flujo del gas tras la alteración provocada en el suelo y c) se realiza la medida de flujo de CO2. Una vez realizada la medición de flujo de CO2, y detectada si existen zonas de anomalías, se debe estimar la cantidad de CO2 que se está escapando a la atmósfera (emanación total), con el objetivo de cuantificar la posible fuga. Existen un amplio rango de metodologías para realizar dicha estimación, siendo necesario entender cuáles son las más apropiadas para obtener el valor más representativo del sistema. En esta tesis se comparan seis técnicas estadísticas: media aritmética, estimador insegado de la media (aplicando la función de Sichel), remuestreo con reemplazamiento (bootstrap), separación en diferentes poblaciones mediante métodos gráficos y métodos basados en criterios de máxima verosimilitud, y la simulación Gaussiana secuencial. Para este análisis se realizaron ocho campañas de muestreo, tanto en la Planta de Desarrollo Tecnológico de Hontomón como en análogos naturales (italianos y españoles). Los resultados muestran que la simulación Gaussiana secuencial suele ser el método más preciso para realizar el cálculo, sin embargo, existen ocasiones donde otros métodos son más apropiados. Como consecuencia, se desarrolla un procedimiento de actuación para seleccionar el método que proporcione el mejor estimador. Este procedimiento consiste, en primer lugar, en realizar un análisis variográfico. Si existe una autocorrelación entre los datos, modelizada mediante el variograma, la mejor técnica para calcular la emanación total y su intervalo de confianza es la simulación Gaussiana secuencial (sGs). Si los datos son independientes se debe comprobar la distribución muestral, aplicando la media aritmética o el estimador insesgado de la media (Sichel) para datos normales o lognormales respectivamente. Cuando los datos no son normales o corresponden a una mezcla de poblaciones la mejor técnica de estimación es la de remuestreo con reemplazamiento (bootstrap). Siguiendo este procedimiento el máximo valor del intervalo de confianza estuvo en el orden del ±20/25%, con la mayoría de valores comprendidos entre ±3,5% y ±8%. La identificación de las diferentes poblaciones muestrales en los datos de flujo de CO2 puede ayudar a interpretar los resultados obtenidos, toda vez que esta distribución se ve afectada por la presencia de varios procesos geoquímicos como, por ejemplo, una fuente geológica o biológica del CO2. Así pues, este análisis puede ser una herramienta útil en el programa de monitorización, donde el principal objetivo es demostrar que no hay fugas desde el reservorio a la atmósfera y, si ocurren, detectarlas y cuantificarlas. Los resultados obtenidos muestran que el mejor proceso para realizar la separación de poblaciones está basado en criterios de máxima verosimilitud. Los procedimientos gráficos, aunque existen pautas para realizarlos, tienen un cierto grado de subjetividad en la interpretación de manera que los resultados son menos reproducibles. Durante el desarrollo de la tesis se analizó, en análogos naturales, la relación existente entre el CO2 y los isótopos del radón (222Rn y 220Rn), detectándose en todas las zonas de emisión de CO2 una relación positiva entre los valores de concentración de 222Rn en aire del suelo y el flujo de CO2. Comparando la concentración de 220Rn con el flujo de CO2 la relación no es tan clara, mientras que en algunos casos aumenta en otros se detecta una disminución, hecho que parece estar relacionado con la profundidad de origen del radón. Estos resultados confirmarían la posible aplicación de los isótopos del radón como trazadores del origen de los gases y su aplicación en la detección de fugas. Con respecto a la determinación de la línea base de flujo CO2 en la PDT de Hontomín, se realizaron mediciones con la cámara de acúmulo en las proximidades de los sondeos petrolíferos, perforados en los ochenta y denominados H-1, H-2, H-3 y H-4, en la zona donde se instalarán el sondeo de inyección (H-I) y el de monitorización (H-A) y en las proximidades de la falla sur. Desde noviembre de 2009 a abril de 2011 se realizaron siete campañas de muestreo, adquiriéndose más de 4.000 registros de flujo de CO2 con los que se determinó la línea base y su variación estacional. Los valores obtenidos fueron bajos (valores medios entre 5 y 13 g•m-2•d-1), detectándose pocos valores anómalos, principalmente en las proximidades del sondeo H-2. Sin embargo, estos valores no se pudieron asociar a una fuente profunda del CO2 y seguramente estuvieran más relacionados con procesos biológicos, como la respiración del suelo. No se detectaron valores anómalos cerca del sistema de fracturación (falla Ubierna), toda vez que en esta zona los valores de flujo son tan bajos como en el resto de puntos de muestreo. En este sentido, los valores de flujo de CO2 aparentemente están controlados por la actividad biológica, corroborado al obtenerse los menores valores durante los meses de otoño-invierno e ir aumentando en los periodos cálidos. Se calcularon dos grupos de valores de referencia, el primer grupo (UCL50) es 5 g•m-2•d-1 en las zonas no aradas en los meses de otoño-invierno y 3,5 y 12 g•m-2•d-1 en primavera-verano para zonas aradas y no aradas, respectivamente. El segundo grupo (UCL99) corresponde a 26 g•m-2•d- 1 durante los meses de otoño-invierno en las zonas no aradas y 34 y 42 g•m-2•d-1 para los meses de primavera-verano en zonas aradas y no aradas, respectivamente. Flujos mayores a estos valores de referencia podrían ser indicativos de una posible fuga durante la inyección y posterior a la misma. Los primeros datos geoquímicos e isotópicos de las aguas superficiales (de escorrentía y de manantiales) en el área de Hontomín–Huermeces fueron analizados. Los datos sugieren que las aguas estudiadas están relacionadas con aguas meteóricas con un circuito hidrogeológico superficial, caracterizadas por valores de TDS relativamente bajos (menor a 800 mg/L) y una fácie hidrogeoquímica de Ca2+(Mg2+)-HCO3 −. Algunas aguas de manantiales se caracterizan por concentraciones elevadas de NO3 − (concentraciones de hasta 123 mg/l), lo que sugiere una contaminación antropogénica. Se obtuvieron concentraciones anómalas de of Cl−, SO4 2−, As, B y Ba en dos manantiales cercanos a los sondeos petrolíferos y en el rio Ubierna, estos componentes son probablemente indicadores de una posible mezcla entre los acuíferos profundos y superficiales. El estudio de los gases disueltos en las aguas también evidencia el circuito superficial de las aguas. Estando, por lo general, dominado por la componente atmosférica (N2, O2 y Ar). Sin embargo, en algunos casos el gas predominante fue el CO2 (con concentraciones que llegan al 63% v/v), aunque los valores isotópicos del carbono (<-17,7 ‰) muestran que lo más probable es que esté relacionado con un origen biológico. Los datos geoquímicos e isotópicos de las aguas superficiales obtenidos en la zona de Hontomín se pueden considerar como el valor de fondo con el que comparar durante la fase operacional, la clausura y posterior a la clausura. En este sentido, la composición de los elementos mayoritarios y traza, la composición isotópica del carbono del CO2 disuelto y del TDIC (Carbono inorgánico disuelto) y algunos elementos traza se pueden considerar como parámetros adecuados para detectar la migración del CO2 a los ambientes superficiales. ABSTRACT Since 2009, a group made up of Universidad Politécnica de Madrid (UPM; Spain) and Università degli Studi Firenze (UniFi; Italy) has been taking part in a joint project called “Strategies for Monitoring CO2 and other Gases in Natural analogues”. The group was coordinated by AMPHOS XXI, a private company established in Barcelona. The Project was financially supported by Fundación Ciudad de la Energía (CIUDEN; Spain) as a part of the EC-funded OXYCFB300 project (European Energy Program for Recovery -EEPR-; www.compostillaproject.eu). The main objectives of the project were aimed to develop and optimize analytical methodologies to be applied at the surface to Monitor and Verify the feasibility of geologically stored carbon dioxide. These techniques were oriented to detect and quantify possible CO2 leakages to the atmosphere. Several investigations were made in natural analogues from Spain and Italy and in the Tecnchnological Development Plant for CO2 injection al Hontomín (Burgos, Spain). The studying techniques were mainly focused on the measurements of diffuse soil gases and surface and shallow waters. The soil-gas measurements included the determination of CO2 flux and the application to natural trace gases (e.g. radon) that may help to detect any CO2 leakage. As far as the water chemistry is concerned, geochemical and isotopic data related to surface and spring waters and dissolved gases in the area of the PDT of Hontomín were analyzed to determine the most suitable parameters to trace the migration of the injected CO2 into the near-surface environments. The accumulation chamber method was used to measure the diffuse emission of CO2 at the soil-atmosphere interface. Although this technique has widely been applied in different scientific areas, it was considered of the utmost importance to adapt the optimum methodology for measuring the CO2 soil flux and estimating the total CO2 output to the specific features of the site where CO2 is to be stored shortly. During the pre-injection phase CO2 fluxes are expected to be relatively low where in the intra- and post-injection phases, if leakages are to be occurring, small variation in CO2 flux might be detected when the CO2 “noise” is overcoming the biological activity of the soil (soil respiration). CO2 flux measurements by the accumulation chamber method could be performed without vegetation clearance or after vegetation clearance. However, the results obtained after clearance show less dispersion and this suggests that this procedure appears to be more suitable for monitoring CO2 Storage sites. The measurement protocol, applied for the determination of the CO2 flux baseline at Hontomín, has included the following steps: a) cleaning and removal of both the vegetal cover and top 2 cm of soil, b) waiting to reduce flux perturbation due to the soil removal and c) measuring the CO2 flux. Once completing the CO2 flux measurements and detected whether there were anomalies zones, the total CO2 output was estimated to quantify the amount of CO2 released to the atmosphere in each of the studied areas. There is a wide range of methodologies for the estimation of the CO2 output, which were applied to understand which one was the most representative. In this study six statistical methods are presented: arithmetic mean, minimum variances unbiased estimator, bootstrap resample, partitioning of data into different populations with a graphical and a maximum likelihood procedures, and sequential Gaussian simulation. Eight campaigns were carried out in the Hontomín CO2 Storage Technology Development Plant and in natural CO2 analogues. The results show that sequential Gaussian simulation is the most accurate method to estimate the total CO2 output and the confidential interval. Nevertheless, a variety of statistic methods were also used. As a consequence, an application procedure for selecting the most realistic method was developed. The first step to estimate the total emanation rate was the variogram analysis. If the relation among the data can be explained with the variogram, the best technique to calculate the total CO2 output and its confidence interval is the sequential Gaussian simulation method (sGs). If the data are independent, their distribution is to be analyzed. For normal and log-normal distribution the proper methods are the arithmetic mean and minimum variances unbiased estimator, respectively. If the data are not normal (log-normal) or are a mixture of different populations the best approach is the bootstrap resampling. According to these steps, the maximum confidence interval was about ±20/25%, with most of values between ±3.5% and ±8%. Partitioning of CO2 flux data into different populations may help to interpret the data as their distribution can be affected by different geochemical processes, e.g. geological or biological sources of CO2. Consequently, it may be an important tool in a monitoring CCS program, where the main goal is to demonstrate that there are not leakages from the reservoir to the atmosphere and, if occurring, to be able to detect and quantify it. Results show that the partitioning of populations is better performed by maximum likelihood criteria, since graphical procedures have a degree of subjectivity in the interpretation and results may not be reproducible. The relationship between CO2 flux and radon isotopes (222Rn and 220Rn) was studied in natural analogues. In all emissions zones, a positive relation between 222Rn and CO2 was observed. However, the relationship between activity of 220Rn and CO2 flux is not clear. In some cases the 220Rn activity indeed increased with the CO2 flux in other measurements a decrease was recognized. We can speculate that this effect was possibly related to the route (deep or shallow) of the radon source. These results may confirm the possible use of the radon isotopes as tracers for the gas origin and their application in the detection of leakages. With respect to the CO2 flux baseline at the TDP of Hontomín, soil flux measurements in the vicinity of oil boreholes, drilled in the eighties and named H-1 to H-4, and injection and monitoring wells were performed using an accumulation chamber. Seven surveys were carried out from November 2009 to summer 2011. More than 4,000 measurements were used to determine the baseline flux of CO2 and its seasonal variations. The measured values were relatively low (from 5 to 13 g•m-2•day-1) and few outliers were identified, mainly located close to the H-2 oil well. Nevertheless, these values cannot be associated to a deep source of CO2, being more likely related to biological processes, i.e. soil respiration. No anomalies were recognized close to the deep fault system (Ubierna Fault) detected by geophysical investigations. There, the CO2 flux is indeed as low as other measurement stations. CO2 fluxes appear to be controlled by the biological activity since the lowest values were recorded during autumn-winter seasons and they tend to increase in warm periods. Two reference CO2 flux values (UCL50 of 5 g•m-2•d-1 for non-ploughed areas in autumn-winter seasons and 3.5 and 12 g•m-2•d-1 for in ploughed and non-ploughed areas, respectively, in spring-summer time, and UCL99 of 26 g•m-2•d-1 for autumn-winter in not-ploughed areas and 34 and 42 g•m-2•d-1 for spring-summer in ploughed and not-ploughed areas, respectively, were calculated. Fluxes higher than these reference values could be indicative of possible leakage during the operational and post-closure stages of the storage project. The first geochemical and isotopic data related to surface and spring waters and dissolved gases in the area of Hontomín–Huermeces (Burgos, Spain) are presented and discussed. The chemical and features of the spring waters suggest that they are related to a shallow hydrogeological system as the concentration of the Total Dissolved Solids approaches 800 mg/L with a Ca2+(Mg2+)-HCO3 − composition, similar to that of the surface waters. Some spring waters are characterized by relatively high concentrations of NO3 − (up to 123 mg/L), unequivocally suggesting an anthropogenic source. Anomalous concentrations of Cl−, SO4 2−, As, B and Ba were measured in two springs, discharging a few hundred meters from the oil wells, and in the Rio Ubierna. These contents are possibly indicative of mixing processes between deep and shallow aquifers. The chemistry of the dissolved gases also evidences the shallow circuits of the Hontomín– Huermeces, mainly characterized by an atmospheric source as highlighted by the contents of N2, O2, Ar and their relative ratios. Nevertheless, significant concentrations (up to 63% by vol.) of isotopically negative CO2 (<−17.7‰ V-PDB) were found in some water samples, likely related to a biogenic source. The geochemical and isotopic data of the surface and spring waters in the surroundings of Hontomín can be considered as background values when intra- and post-injection monitoring programs will be carried out. In this respect, main and minor solutes, the isotopic carbon of dissolved CO2 and TDIC (Total Dissolved Inorganic Carbon) and selected trace elements can be considered as useful parameters to trace the migration of the injected CO2 into near-surface environments.

Microtermometría, direcciones de flujo hidrotermal y metalogenia del yacimiento de tungsteno de Pasto Bueno (Ancash, Perú)

El yacimiento de Pasto Bueno se localiza en el extremo nordeste del Batolito de la Cordillera Blanca, comprende diversas vetas, generalmente subverticales, asociadas al stock cuarzomonzonitico de Consuzo, datado como Terciario Superior, que intruye a las pizarras de la fm. Chicama y cuarcitas de la fm. Chimu. Las principales vetas discurren con direccion N-S cortando al stock, aunque tambien existen sistemas NE-SW asi como NW-SE encajados sobre las rocas metamorficas. La mineralogia de mena reconocida comprende wolframita (hubnerita), tetraedrita/tenantita, esfalerita y galena, en una ganga de cuarzo, fluorita, sericita, pirita y carbonatos, ademas de molibdenita, calcopirita, bornita, arsenopirita, enargita (luzonita), stolzita, scheelita, zinnwaldita, topacio, tungstita y arsenico nativo. Estudios previos han caracterizado Pasto Bueno como un yacimiento con una gran componente de greisen, con una evolucion de las vetas desde un episodio temprano esteril de 400 oC, depositando la mineralizacion economica en torno a los 220-250 oC y con un evento postumo de 175-220 oC rico en CO2. La precipitacion de la wolframita se produjo a partir de un fluido netamente hidrotermal, sin embargo, dicha precipitacion estuvo controlada por el aporte al sistema de aguas externas meteoricas y/o metamorficas. El trabajo llevado a cabo ha consistido en la realizacion de un estudio microtermometrico de las 3 principales estructuras del distrito: Consuelo, Alonso-Fenix y Chabuca, para caracterizar la evolucion del fluido mineralizador desde el stock (veta Consuelo) hacia las rocas metasedimentarias de las fm. Chicama y Chimu (manto Alonso-Fenix y veta Chabuca). Para ello se realizo un muestreo sobre el evento principal de mineralizacion. Dichas muestras se sometieron a un estudio petrografico de lamina gruesa para seleccionar las muestras optimas para el posterior estudio microtermometrico. Previamente a la obtencion de las medidas de temperatura de fusion del hielo (criotermometria) y de homogenizacion del fluido; se realizo un estudio de petrografia de inclusiones fluidas para caracterizarlas y seleccionar las representativas. La interpretacion de los resultados ha permitido confirmar la existencia de un episodio previo de alta temperatura, superior a 282 oC y un evento mineralizador con temperaturas en torno a los 200-240 oC. Sin embargo, las salinidades obtenidas son mucho menores que las previamente publicadas, en torno al 5 % peso eq. NaCl, frente a 11-17 % peso eq. NaCl. Tambien se ha observado un fluido postumo rico en CO2, pero de temperatura superior, en torno a los 270 oC. Los gradientes isotermicos muestran dos focos para dichos fluidos hidrotermales: el primero asociado al stock en la veta Consuelo, y el segundo en la veta Chabuca, asociado a la zona de cabalgamiento de las pizarras de la fm. Chicama sobre las cuarcitas de la fm. Chimu. Este segundo foco puede corresponder con los aportes externos de aguas metamorficas. Para finalizar, se dan una serie de pautas para guiar las futuras exploraciones en el yacimiento. ABSTRACT The Pasto Bueno deposit is located at the northeastern end of the Cordillera Blanca Batholith. It comprises several veins, generally subvertical, associated with the quartz-monzonite stock of Consuzo, dated as Tertiary, which intrudes the Chicama fm. slates and the Chimu fm. quartzites. The main veins trend N-S cutting the stock, although there are also NE-SW and NWSE systems, hosted by the metamorphic rocks. The ore mineralogy comprises wolframite (hubnerite), tetrahedrite/tennantite, sphalerite and galena in a gangue of quartz, fluorite, sericite, pyrite and carbonates, and minor molybdenite, chalcopyrite, bornite, arsenopyrite, enargite (luzonite), stolzite, scheelite, zinnwaldite, topaz, tungstite and native arsenic. Previous studies have characterized Pasto Bueno as a deposit with a large component of greisen, with an evolution of the veins from an early barren 400 oC event , followed by economic mineralization of about 220-250 °C and a late event of 175 -220 oC rich in CO2. Wolframite precipitation occurred from a purely hydrothermal fluid; however, this precipitation was controlled by an external flux of meteoric and/or metamorphic waters. Microthermometric studies of the 3 main structures of the district (Consuelo, Alonso-Fenix and Chabuca veins) have been carried out to depict the evolution of the mineralizing fluid coming from the stock (Consuelo vein) into the metasedimentary rocks of the Chimu and Chicama fm. (Alonso-Fenix and Chabuca veins). The sampling was performed over the main event of mineralization. These samples were subject to a quick plate petrography study in order to select the optimal samples for further microthermometry studies. Before the freezing/heating measures, a fluid inclusion petrography study was done to characterize and select the representative F.I. Interpretation of results has confirmed the existence of a previous episode of higher temperature, over 282 °C, and a mineralizing event with temperatures of about 200-240 °C. However, obtained salinities, about 5 wt% NaCl equivalents, are much lower than those previously reported, about 11-17 wt% NaCl equivalents. A last fluid, rich in CO2, but of higher temperature, about 270 oC, has been characterized. Isothermal gradients show two foci for the hydrothermal fluids: the first one associated to the Consuzo stock as shown in the Consuelo vein, and the second one related to the thrust fault which places the Chicama fm. slates over the Chimu fm. quartzites in the Chabuca vein area. This second focus may correspond to an external input of metamorphic waters. Finally, some guidelines have been given to guide future explorations.

A nucleolar protein related to ribosomal protein L7 is required for an early step in large ribosomal subunit biogenesis

The Saccharomyces cerevisiae Rlp7 protein has extensive identity and similarity to the large ribosomal subunit L7 proteins and shares an RNA-binding domain with them. Rlp7p is not a ribosomal protein; however, it is encoded by an essential gene and therefore must perform a function essential for cell growth. In this report, we show that Rlp7p is a nucleolar protein that plays a critical role in processing of precursors to the large ribosomal subunit RNAs. Pulse–chase labeling experiments with Rlp7p-depleted cells reveal that neither 5.8SS, 5.8SL, nor 25S is produced, indicating that both the major and minor processing pathways are affected. Analysis of processing intermediates by primer extension indicates that Rlp7p-depleted cells accumulate the 27SA3 precursor RNA, which is normally the major substrate (85%) used to produce the 5.8S and 25S rRNAs, and the ratio of 27SBL to 27SBS precursors changes from approximately 1:8 to 8:1 (depleted cells). Because 27SA3 is the direct precursor to 27SBS, we conclude that Rlp7p is specifically required for the 5′ to 3′ exonucleolytic trimming of the 27SA3 into the 27SBS precursor. As it is essential for processing in both the major and minor pathways, we propose that Rlp7p may act as a specificity factor that binds precursor rRNAs and tethers the enzymes that carry out the early 5′ to 3′ exonucleolytic reactions that generate the mature rRNAs. Rlp7p may also be required for the endonucleolytic cleavage in internal transcribed spacer 2 that separates the 5.8S rRNA from the 25S rRNA.

Estudo das táticas reprodutivas em duas espécies de Coenagrionidae (Odonata: Zygoptera)

Nos estudos sobre a teoria da Seleção Sexual, as libélulas têm sido amplamente estudadas devido à grande variedade de padrões comportamentais, de coloração e táticas reprodutivas. Como forma de demonstrar táticas reprodutivas adotadas por duas espécies de libélulas, esta dissertação teve como objetivos principais: i) investigar o papel de traços secundários como a coloração corporal na competição intra-sexual de uma espécie territorial e ii) analisar se os traços corporais como tamanho e morfologia das asas predizem a tática de acasalamento adotada por machos de uma espécie nãoterritorial. Sugere-se que a coloração corporal pode predizer o resultado de lutas e também se correlacionar positivamente com a condição física dos machos territoriais de Tigriagrion aurantinigrum. Ademais, traços corporais como o tamanho e a morfologia das asas influenciam na tática reprodutiva utilizada por machos não-territoriais de Epipleoneura williamsoni. Portanto, com os resultados obtidos, conclui-se que a variação nos sinais visuais exerce um papel essencial na comunicação animal e na resolução de conflitos, indicando ainda que pode haver uma sinalização da condição física dos machos. Além disso, os resultados mostraram evidências em como diferentes táticas reprodutivas se relacionam com traços corporais como agilidade e tamanho corporal, os quais podem influenciar no sucesso reprodutivo dos indivíduos.

Tiburzio Spannocchi’s project for the fortifications of Fuenterrabía in 1580

Fuenterrabía (Hondarribia) is a town located on the Franco-Spanish border. Between the 16th and 19th centuries it was considered to be one of the most outstanding strongholds in the Basque Country due to its strategic position. The bastion system of fortification was extremely prevalent in this stronghold. It was one of the first Spanish towns to adopt the incipient Renaissance designs of the bastion. The military engineers subsequently carried out continuous fortification projects that enabled the structure to withstand the advances being made in artillery and siege tactics. After the construction of the citadel of Pamplona had begun in 1571, following the design of the prestigious military engineer, Jacobo Palear Fratín and being revised by Viceroy Vespasiano Gonzaga, the aforementioned engineer undertook an ambitious project commissioned by Felipe II to modernise the fortifications of Fuenterrabía. Neither the plans nor the report of this project have been conserved, but in the year 2000, César Fernández Antuña published the report written by Spannocchi on the state of the fortifications of Fuenterrabía when he arrived to the Spanish peninsula, discovered in the Archivo Histórico Provincial de Zaragoza. This document conducts an in-depth analysis of Spannocchi’s project and how it was related to Fratín’s previous project. It concludes that this project encountered problems in updating the new bastions at the end of the 16th century, and identifies the factors which prevented the stronghold from being extended as was the case in Pamplona after Fratín’s project.

Rivaroxabananddabigatraninpatientsundergoing catheter ablation of atrial fibrillation

Aims: The recent availability of the novel oral anticoagulants (NOACs) may have led to a change in the anticoagulation regimens of patients referred to catheter ablation of atrial fibrillation (AF). Preliminary data exist concerning dabigatran, but information regarding the safety and efficacy of rivaroxaban in this setting is currently scarce. Methods: and results Of the 556 consecutive eligible patients (age 61.0 ± 9.6; 74.6% men; 61.2% paroxysmal AF) undergoing AF catheter ablation in our centre (October 2012 to September 2013) and enroled in a systematic standardized 30-day follow-up period: 192 patients were under vitamin K antagonists (VKAs), 188 under rivaroxaban, and 176 under dabigatran. Peri-procedural mortality and significant systemic or pulmonary thromboembolism (efficacy outcome), as well as bleeding events (safety outcome) during the 30 days following the ablation were evaluated according to anticoagulation regimen. During a 12-month time interval, the use of the NOACs in this population rose from <10 to 70%. Overall, the rate of events was low with no significant differences regarding: thrombo-embolic events in 1.3% (VKA 2.1%; rivaroxaban 1.1%; dabigatran 0.6%; P = 0.410); major bleeding in 2.3% (VKA 4.2%; rivaroxaban 1.6%; dabigatran 1.1%; P = 0.112), and minor bleeding 1.4% (VKA 2.1%; rivaroxaban 1.6%; dabigatran 0.6%; P = 0.464). No fatal events were observed. Conclusion: The use of the NOAC in patients undergoing catheter ablation of AF has rapidly evolved (seven-fold) over 1 year. These preliminary data suggest that rivaroxaban and dabigatran in the setting of catheter ablation of AF are efficient and safe, compared with the traditional VKA.

Cretaceous nannofossils of southeast France

The Aptian-lower Albian succession of the Vocontian Basin (SE France) consists of marine hemipelagic sediments including several black shale horizons. The latter are partly of regional and partly of global distribution. This sedimentary succession records the nannoplankton evolution of the Aptian-early Albian interval and thus provides an excellent opportunity to calibrate the calcareous nannofossil record with Tethyan ammonite and planktic foraminiferal biostratigraphy. The calcareous nannofossil biostratigraphy presented in this paper supports previous zonations, but it also provides a much higher resolution and thus improves the correlation of different black shale horizons on a supraregional scale. Up to 23 major (supraregionally significant) and minor (regionally significant) first and last occurrences of calcareous nannofossil taxa are recognized. Nannoconid abundances decrease rapidly in the upper Lower Aptian (nannoconid crisis I, NCI) and in the middle Upper Aptian (nannoconid crisis II, NCII). Both decreases correlate with carbonate-platform drowning events. The upper Lower Aptian interval above the NCI is characterized by high abundances of large specimens of Assipetra infracretacea and Rucinolithus terebrodentarius probably of supraregional significance. The uppermost Aptian-Lower Albian is characterized by high abundances of the calcareous nannoplankton taxon Repagulum parvidentatum, reflecting boreal influence on the Tethyan Realm. This suggests a temporary decrease in surface-water temperatures in the Vocontian Basin.

Household decision making : an exploratory study /

"This study is designed to gain insights into various aspects of family decision making. Specifically, the study examines the prevalance of autonomous versus joint decision making, the incidence of conflict in joint decision making, and the tactics used by individual household members in resolving conflict."

Reprints. 1902-1919.

Made up set; supplied title.

[Shakespeare: first folio edition] ...

Issued with less exhaustive notes in 12 vols. as the Pembroke edition.

Lettres curieuses sur l'Amérique Septentrionale. Canada. Microform

Eight letters from Jesuit missionaries in America, selected from v. 6-8 of "Lettres edifiantes et curieuses". Paris, 1780-88. In the present edition the title, place and date of writing, and name of writer have been omitted, and minor changes made at beginning and end of the letters. The first five letters may be found, with English translations, in v. 66-69 of "The Jesuit relations and allied documents", 1896-1901.