Calculation of volume from crank angle using reconfigurable hardware

Fast calculation of quantities such as in-cylinder volume and indicated power is important in internal combustion engine research. Multiple channels of data including crank angle and pressure were collected for this purpose using a fully instrumented diesel engine research facility. Currently, existing methods use software to post-process the data, first calculating volume from crank angle, then calculating the indicated work and indicated power from the area enclosed by the pressure-volume indicator diagram. Instead, this work investigates the feasibility of achieving real-time calculation of volume and power via hardware implementation on Field Programmable Gate Arrays (FPGAs). Alternative hardware implementations were investigated using lookup tables, Taylor series methods or the CORDIC (CoOrdinate Rotation DIgital Computer) algorithm to compute the trigonometric operations in the crank angle to volume calculation, and the CORDIC algorithm was found to use the least amount of resources. Simulation of the hardware based implementation showed that the error in the volume and indicated power is less than 0.1%.

First year design "Visualisation II": The hybridisation of analogue and digital tools

This paper discusses first year students’ responses and outcomes to the integration of digital technologies in their second semester foundational visualisation class; ‘Visualisation II’. As the second class in the Visualisation series, previous analogue knowledge taught in ‘Visualisation I’ is compounded with new digital technologies establishing the introduction to a myriad of hybrid visualisation tools and techniques for design exploration and design artefact. This research examines the differentiation between analogue and digital design, common precedents of the two, and reflects upon the environment and class structure with the learning experiences and confidence of surveyed participants.

Briefing paper on eTextbooks and third party eLearning products and their implications for Australian university libraries

The briefing paper was commissioned by the Council of Australian University Librarians (CAUL) to examine the current picture and evolving role of electronic textbooks (eTextbooks) and third party eLearning products in the academic arena. The study reviews industry trends, identifies the major players and considers the different stakeholder perspectives of eTextbook adoption. Within the context of learning and teaching in the digital age, specific areas of research, policy and practice are highlighted to consider the implications that eTextbooks might have for universities in general and for university libraries in particular. An environmental scan focused on the analysis of current developments and the anticipated future directions of digital learning resources in Australia, as well as in other major English speaking countries such as the United Kingdom and the United States. This research guided the development of key interview questions aimed at examining, at a deeper level, diverse stakeholder perspectives about the roles university libraries can play in the adoption of digital learning content.

Digital futures for cultural and media studies

An ambitious rendering of the digital future from a pioneer of media and cultural studies, a wise and witty take on a changing field, and our orientation to it Investigates the uses of multimedia by creative and productive citizen-consumers to provide new theories of communication that accommodate social media, participatory action, and user-creativity Leads the way for new interdisciplinary engagement with systems thinking, complexity and evolutionary sciences, and the convergence of cultural and economic values Analyzes the historical uses of multimedia from print, through broadcasting to the internet Combines conceptual innovation with historical erudition to present a high-level synthesis of ideas and detailed analysis of emergent forms and practices Features an international focus and global reach to provide a basis for students and researchers seeking broader perspectives

Engineering across cultures : new learning resources for intercultural competency in engineering

BACKGROUND The work described in this paper has emerged from an ALTC/OLT funded project, Exploring Intercultural Competency in Engineering. The project indentified many facets of culture and intercultural competence that go beyond a culture-as-nationality paradigm. It was clear from this work that resources were needed to help engineering educators introduce students to the complex issues of culture as they relate to engineering practice. A set of learning modules focussing on intercultural competence in engineering practice were developed early on in the project. Through the OLT project, these modules have been expanded into a range of resources covering various aspects of culture in engineering. Supporting the resources, an eBook detailing the ins and outs of intercultural competency has also been developed to assist engineering educators to embed opportunities for students to develop skills in unpacking and managing cross-cultural challenges in engineering practice. PURPOSE This paper describes the key principles behind the development of the learning modules, the areas they cover and the eBook developed to support the modules. The paper is intended as an introduction to the approaches and resources and extends an invitation to the community to draw from, and contribute to this initial work. DESIGN/METHOD A key aim of this project was to go beyond the culture-as-nationality approach adopted in much of the work around intercultural competency (Deardorff, 2011). The eBook explores different dimensions of culture such as workplace culture, culture’s influence on engineering design, and culture in the classroom. The authors describe how these connect to industry practice and explore what they mean for engineering education. The packaged learning modules described here have been developed as a matrix of approaches moving from familiar known methods through complicated activities relying to some extent on expert knowledge. Some modules draw on the concept of ‘complex un-order’ as described in the ‘Cynefin domains’ proposed by Kurtz and Snowden (2003). RESULTS Several of the modules included in the eBook have already been trialled at a variety of institutions. Feedback from staff has been reassuringly positive so far. Further trials are planned for second semester 2012, and version 1 of the eBook and learning modules, Engineering Across Cultures, is due to be released in late October 2012. CONCLUSIONS The Engineering Across Cultures eBook and learning modules provide a useful and ready to employ resource to help educators tackle the complex issue of intercultural competency in engineering education. The book is by no means exhaustive, and nor are the modules, they instead provide an accessible, engineering specific guide to bringing cultural issues into the engineering classroom.

The challenges of preparing pre-service teachers to embrace a digital pedagogy

The need for pre-service teachers to be proficient in the use of information and communication technologies (ICT) in the classroom once they graduate is essential, though this process is not a straightforward process (Zhang, 2008) and needs to go beyond pre-service teachers just being able to use ICT. Research suggests that for teachers to successfully use ICT in their classrooms they need to be specifically trained to do so (Markauskaite, 2007; Batane, 2004; Jacobsen, Clifford & Friesen, 2002). Pre-service teachers must also be able to embrace and use new and emerging ICT’s, often referred to as digital technologies, within their pedagogical approaches to teaching and learning. According to UNESCO, these “new technologies require new teacher roles, new pedagogies, and new approaches to teacher training” (2008, p.9). However, new approaches to teacher training have moved very slowly in many areas and preparing pre-service teachers to develop proficiency in embracing a digital pedagogy within their own classrooms can be a challenge for teacher training institutes. This paper reports on a case study of first year education students (N=667) and their experiences during their first semester of pre-service teacher education in a core ICT unit. It will report on the background ICT knowledge and skills that these students bring to the course as well as their expectations of the unit and ICT in their future teaching. The paper will then draw on the research results to identify challenges facing teacher training of pre-service teachers in using digital technologies in their future classrooms.

When digital native meets analogue reality : a case study of ICT skills in first year university students

Recently claims have been made that all universities will in coming decades merge to become just a few mega-institutions offering online degrees to the world. This assumes a degree of literacy with ICT (information and communication technology) amongst potential students, who are often regarded as 'digital natives'. Far from being digital natives, many students have considerable trouble using ICT beyond the ubiquitous Facebook. While some students are computer literate, a substantial proportion lack the skills to prosper under their own devices in an online tertiary education environment. For these students a blended learning experience is needed to develop skills to effectively interact in the virtual environment. This paper presents a case study that specifically examined the ICT capabilities of first-year university students enrolled in the School of Civil Engineering and the Built Environment at Queensland University of Technology (QUT). Empirical data are presented and curriculum strategies articulated to develop ICT skills in university undergraduates.

Application of a digital elevation model for flood modeling for the Pagsangaan River in Leyte

Flood related scientific and community-based data are rarely systematically collected and analysed in the Philippines. Over the last decades the Pagsangaan River Basin, Leyte, has experienced several flood events. However, documentation describing flood characteristics such as extent, duration or height of these floods are close to non-existing. To address this issue, computerized flood modelling was used to reproduce past events where there was data available for at least partial calibration and validation. The model was also used to provide scenario-based predictions based on A1B climate change assumptions for the area. The most important input for flood modelling is a Digital Elevation Model (DEM) of the river basin. No accurate topographic maps or Light Detection And Ranging (LIDAR)-generated data are available for the Pagsangaan River. Therefore, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Digital Elevation Map (GDEM), Version 1, was chosen as the DEM. Although the horizontal spatial resolution of 30 m is rather desirable, it contains substantial vertical errors. These were identified, different correction methods were tested and the resulting DEM was used for flood modelling. The above mentioned data were combined with cross-sections at various strategic locations of the river network, meteorological records, river water level, and current velocity to develop the 1D-2D flood model. SOBEK was used as modelling software to create different rainfall scenarios, including historic flooding events. Due to the lack of scientific data for the verification of the model quality, interviews with local stakeholders served as the gauge to judge the quality of the generated flood maps. According to interviewees, the model reflects reality more accurately than previously available flood maps. The resulting flood maps are now used by the operations centre of a local flood early warning system for warnings and evacuation alerts. Furthermore these maps can serve as a basis to identify flood hazard areas for spatial land use planning purposes.

Standing up and finding my voice through positive digital storytelling

‘Positive Stories’ is a digital storytelling initiative that took place in Adelaide in 2010–2011.1 This article describes participants’ experiences of creative self-representation and the thorny complications of mediating voice, particularly in situations where privacy and publicity are significant issues.

Mediating identity narratives : a case study in queer digital storytelling as everyday activism

Digital Stories are short autobiographical documentaries, often illustrated with personal photographs and narrated in the first person, and typically produced in group workshops. As a media form they offer ‘ordinary people’ the opportunity to represent themselves to audiences of their choosing; and this amplification of hitherto unheard voices has significant repercussions for their social participation. Many of the storytellers involved in the ‘Rainbow Family Tree’ case study that is the subject of this paper can be characterised as ‘everyday’ activists for their common desire to use their personal stories to increase social acceptance of marginalised identity categories. However, in conflict with their willingness to share their personal stories, many fear the risks and ramifications of distributing them in public spaces (especially online) to audiences both intimate and unknown. Additionally, while technologies for production and distribution of rich media products have become more accessible and user-friendly, many obstacles remain. For many people there are difficulties with technological access and aptitude, personal agency, cultural capital, and social isolation, not to mention availability of the time and energy requisite to Digital Storytelling. Additionally, workshop context, facilitation and distribution processes all influence the content of stories. This paper explores the many factors that make ‘authentic’ self-representation far from straight forward. I use qualitative data drawn from interviews, Digital Story texts and ethnographic observation of GLBTQIS participants in a Digital Storytelling initiative that combined face-to-face and online modes of participation. I consider mediating influences in practice and theory and draw on strategies put forth in cultural anthropology and narrative therapy to propose some practical tools for nuanced and sensitive facilitation of Digital Storytelling workshops and webspaces. Finally, I consider the implications of these facilitation strategies for voice, identity and social participation.

The role of the internet and digital technologies in the struggle for recognition of the forgotten Australians

Our contemporary public sphere has seen the 'emergence of new political rituals, which are concerned with the stains of the past, with self disclosure, and with ways of remembering once taboo and traumatic events' (Misztal, 2005). A recent case of this phenomenon occurred in Australia in 2009 with the apology to the 'Forgotten Australians': a group who suffered abuse and neglect after being removed from their parents – either in Australia or in the UK - and placed in Church and State run institutions in Australia between 1930 and 1970. This campaign for recognition by a profoundly marginalized group coincides with the decade in which the opportunities of Web 2.0 were seen to be diffusing throughout different social groups, and were considered a tool for social inclusion. This paper examines the case of the Forgotten Australians as an opportunity to investigate the role of the internet in cultural trauma and public apology. As such, it adds to recent scholarship on the role of digital web based technologies in commemoration and memorials (Arthur, 2009; Haskins, 2007; Cohen and Willis, 2004), and on digital storytelling in the context of trauma (Klaebe, 2011) by locating their role in a broader and emerging domain of social responsibility and political action (Alexander, 2004).

Custom digital workflows : a new framework for design analysis integration

Flexible information exchange is critical to successful design-analysis integration, but current top-down, standards-based and model-oriented strategies impose restrictions that contradicts this flexibility. In this article we present a bottom-up, user-controlled and process-oriented approach to linking design and analysis applications that is more responsive to the varied needs of designers and design teams. Drawing on research into scientific workflows, we present a framework for integration that capitalises on advances in cloud computing to connect discrete tools via flexible and distributed process networks. We then discuss how a shared mapping process that is flexible and user friendly supports non-programmers in creating these custom connections. Adopting a services-oriented system architecture, we propose a web-based platform that enables data, semantics and models to be shared on the fly. We then discuss potential challenges and opportunities for its development as a flexible, visual, collaborative, scalable and open system.

Research data finder : an institutional metadata repository

QUT’s new metadata repository (data registry), Research Data Finder, has been designed to promote the visibility and discoverability of QUT research datasets. Funded by the Australian National Data Service (ANDS), it will provide a qualitative snapshot of research data outputs created or collected by members of the QUT research community that are available via open or mediated access. As a fully integrated metadata repository Research Data Finder aligns with institutional sources of truth, such as QUT’s research administrative system, ResearchMaster, as well as QUT’s Academic Profiles system to provide high quality data descriptions that increase awareness of, and access to, shareable research data. In addition, the repository and its workflows are designed to foster smoother data management practices, enhance opportunities for collaboration and research, promote cross-disciplinary research and maximize existing research datasets. The metadata schema used in Research Data Finder is the Registry Interchange Format - Collections and Services (RIF-CS), developed by ANDS in 2009. This comprehensive schema is potentially complex for researchers; unlike metadata for publications, which are often made publicly available with the official publication, metadata for datasets are not typically available and need to be created. Research Data Finder uses a hybrid self-deposit and mediated deposit system. In addition to automated ingests from ResearchMaster (research project information) and Academic Profiles system (researcher information), shareable data is identified at a number of key “trigger points” in the research cycle. These include: research grant proposals; ethics applications; Data Management Plans; Liaison Librarian data interviews; and thesis submissions. These ingested records can be supplemented with related metadata including links to related publications, such as those in QUT ePrints. Records deposited in Research Data Finder are harvested by ANDS and made available to a national and international audience via Research Data Australia, ANDS’ discovery service for Australian research data. Researcher and research group metadata records are also harvested by the National Library of Australia (NLA) and these records are then published in Trove (the NLA’s digital information portal). By contributing records to the national infrastructure, QUT data will become more visible. Within Australia and internationally, many funding bodies have already mandated the open access of publications produced from publicly funded research projects, such as those supported by the Australian Research Council (ARC), or the National Health and Medical Research Council (NHMRC). QUT will be well placed to respond to the rapidly evolving climate of research data management. This project is supported by the Australian National Data Service (ANDS). ANDS is supported by the Australian Government through the National Collaborative Research Infrastructure Strategy Program and the Education Investment Fund (EIF) Super Science Initiative.