Planeamento de experiências : modelos e desafios dos planos em blocos incompletos

The main purpose of an Experimental Design resides mainly in the search for relationships between variables and in comparing levels of factors, using statistical treatment of collected data. The use of blocks in Experimental Design is essential because it allows reducing or eliminating the variability introduced by factors that can influence the experience but are not of main interest and/or were not explicitly included during experiments. In this work we present the results of the study and research of Balanced Incomplete Block Designs (BIBD), Balanced Incomplete Block Designs with repeated blocks (BIBDR) and the Incomplete Blocks Designs with blocks with different dimensions (VBBD). We explore some properties and construction methods of such designs and illustrate, when possible, with examples. Based on Block Designs, we present an application of BIBDR in Education, with the aim of comparing five domains of algebraic thinking in a sample of 1st year students of higher education in Cape Verde. For the analysis of sample data, the software R was used, version 2.12.1. We observed that significant differences exist between some of the domains of algebraic thinking, especially among the domains of Generalization of Arithmetic and Algebraic Technicality with the remaining areas. For a more representative sample, we recommend a bigger sample consisting of students from all higher institutions of Cape Verde.

Allocating ideas: Horizontal competition in tournaments

We develop a stylized model of horizontal and vertical competition intournaments with two competing firms. The sponsor cares about the qualityof the design but also about the design location. A priori not even thesponsor knows his preferred design location, which is only discoveredonce he has seen the actual proposals. We show that the more efficientfirm is more likely to be conservative when choosing the design location.Also, to get some differentiation in design locations, the cost differencebetween contestants can neither be too small nor too big. Therefore, ifthe sponsor mainly cares about the design location, participation in thetournaments by the two lowest cost contestants cannot be optimal for thesponsor.

Variations in national management accounting approaches

During the 1990's studies of management accounting practices in Europe and in Latin America have given us data on 23 countries. In this paper we use this data to identify five distinct aspects of national management accounting culture being:1. The influence of regulations on official recommendations;2. The source of management accountants;3. Influence from one country to another;4. Variations in use of specific techniques;5. Variations in the objectives of the management accounting system.We then identify seven significant implications of the manager operating in the multinational environment.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos.

O principal objetivo de um Planeamento de Experiências reside essencialmente na procura de relações entre variáveis e na comparação de níveis de fatores, recorrendo ao tratamento estatístico dos dados recolhidos. A utilização de blocos no Planeamento de Experiências é fundamental, pois permite reduzir ou eliminar a variabilidade introduzida por fatores que podem influenciar a experiência mas que não interessam e/ou não foram explicitamente incluídos durante o planeamento. Neste trabalho apresentamos os resultados do estudo e investigação dos Planos em Blocos Incompletos Equilibrados (BIBD), Planos em Blocos Incompletos Equilibrados com repetição de blocos (BIBDR) e Planos em Blocos Incompletos com blocos de diferentes dimensões (VBBD). Exploramos algumas propriedades e métodos de construção destes planos e ilustramos, sempre que possível, com exemplos. Tendo como base o planeamento em blocos, apresentamos uma aplicação dos BIBDR na área da Educação com o objetivo de comparar cinco domínios do pensamento algébrico de uma amostra de alunos do 1º ano do ensino superior em Cabo Verde. Para a análise dos dados da amostra foi utilizado o software R, versão 2.12.1. Pudemos constatar que existem diferenças significativas entre alguns dos domínios do pensamento algébrico, nomeadamente entre os domínios da Generalização da Aritmética e Tecnicismo Algébrico com os restantes domínios. Recomendamos a escolha de uma amostra mais representativa constituída por alunos de todas as instituições superiores de Cabo Verde

Disseny pràctic d'un transmissor d'àudio complert utilitzant una modulació AM

RESUM Un transmissor d’AM (modulació per amplitud), utilitza una de les moltes tècniques de modulació existents avui en dia. És molta la importància que té la modulació de senyals i aquests en són alguns exemples: -Facilita la propagació del senyal per cable o per aire. -Ordena l’espectre, distribuint Canals a les diferents informacions. -Disminueix la dimensió de les antenes. -Optimitza l’ample de banda de cada canal. -Evita interferències entre Canals. -Protegeix la informació de les degradacions per soroll. -Defineix la qualitat de la informació transmesa. L’objectiu principal d’aquest treball, serà realitzar un transmissor d’AM utilitzant components electrònics disponibles al mercat. Això es realitzarà mitjançant diversos procediments de disseny. Es realitzarà un procediment de disseny teòric, tot utilitzant els “datasheets” dels diferents components. Es realitzarà un procediment de disseny mitjançant la simulació, gràcies al qual es podrà provar el disseny del dispositiu i realitzar-ne algunes parts impossibles a reproduir teòricament. I finalment es realitzarà el dispositiu a la pràctica. Entre les conclusions més rellevants obtingudes en aquest treball, voldríem destacar la importància de la simulació per poder dissenyar circuits de radiofreqüència. En aquest treball s’ha demostrat que gràcies a una bona simulació, el primer prototip de dispositiu creat ens ha funcionat a la perfecció. D’altre banda, també comentar la importància d’un disseny adequat d’antena per poder aprofitar al màxim el rendiment del nostre dispositiu. Per concloure, la realització d’un aparell transmissor aporta unes nocions equilibrades d’electrònica i telecomunicacions importants per al disseny de dispositius de comunicació.

Automatització d'un procés de fabricació de peces plàstiques

RESUM L'automatització s'utilitza des de fa molts anys, tot i que va començar a agafar la definició que coneixem actualment al voltant dels anys seixanta i setanta, moment en què es comencen a comercialitzar els primers PLC. A partir d'aquí, el seu creixement ha estat exponencial. En aquest sentit, la tecnologia ha anat avançant i ha augmentat els components que la forma, per això a hores d'ara encara no sabem fins on podrà arribar i què aconseguirà. Per a la indústria tot això ha significat l'automatització de processos que fins ara utilitzaven molt mà d'obra, reduint-la dràsticament. Una de les indústries que més s'ha beneficiat de tots aquests avenços ha estat la de l'automoció, concretament les seves grans línies de producció, automatitzades a uns nivells que fins fa poc temps eren impensables. Aquest projecte forma part d'aquesta indústria, no directament per a la construcció de l'automòbil, sinó indirectament, ja que l'empresa per a la qual s'ha fet l'automatització fabrica peces plàstiques per a automòbils. Concretament, unes peces amb uns injerts metàl•lics conductors que es munten a tots els vehicles i s'utilitzen per accionar els neteja vidres dels cotxes. Aquest fet implica que la fabricació i el disseny de la peça sigui curosament vigilat i controlat per al client final, amb uns controls de qualitat extremadament exigents. El funcionament del procés de fabricació es fa a partir d'unes peces de plàstic produïdes per una injectora que es fan passar per unes estacions automatitzades, cada una de les quals fa una acció concreta per aconseguir el muntatge final.

Programa de gestió per la Pastisseria Mas

En els últims anys, el món de la informàtica ha evolucionat d'una manera inimaginable, tan a nivell de Hardware com de Software. Aquesta evolució ha donat lloc a la creació de moltes empreses dedicades a la programació, on una de les seves principals feines ha estat la realització de programes de gestió d'empreses. Moltes vegades, però, els programes estàndards no poden satisfer el total de les necessitats dels clients, sinó algunes d’aquestes i realitzar un programa personalitzat té un cost elevat. En el cas de la Pastisseria Mas de Navàs, una empresa familiar, per poder realitzar les tasques administratives utilitzen fulls de càlcul, concretament el Microsoft Excel, que permet portar els comptes d'una manera més o menys senzilla, ja que només són necessàries unes nocions bàsiques d'informàtica. El mateix passa amb les dades dels proveïdors, que les guarden en una Base de Dades del tipus Microsoft Access. Una altra de les mancances és el tema dels encàrrecs que es fa de manera manual. Per tant, l’objectiu d’aquest projecte, és realitzar un programa que els hi faciliti la seva activitat. Aquest programa els permetrà gestionar les dades que utilitzen, com la informació sobre els clients, personal, comandes... També s’ha desenvolupat una web que permet obtenir informació sobre les comandes que s’han realitzat. Aquesta aplicació està dissenyada per funcionar en l’entorn Windows XP i s’ha desenvolupat amb el compilador de CodeGear Rad Studio, concretament el C++ Builder 2009. A nivell de base de dades, he utilitzat MySQL i en el cas de la pàgina web, PHP i lamateixa base de dades. L’anàlisi i el disseny ha estat fet en UML.

Glyphosate behavior in a Rhodic Oxisol under no-till and conventional agricultural systems

The behavior of glyphosate in a Rhodic Oxisol, collected from fields under no-till and conventional management systems in Ponta Grossa, Parana state (Brazil) was investigated. Both agricultural systems had been in production for 23 years. Glyphosate mineralization, soil-bound forms, sorption and desorption kinetics, sorption/desorption batch experiments, and soil glyphosate phythoavailability (to Panicum maximum) were determined. The mineralization experiment was set up in a completely randomized design with a 2 x 2 factorial scheme (two management systems and two 14C radiolabelled positions in the glyphosate), with five replicates. 14CO2 evolution was measured in 7-day intervals during 63 days. The glyphosate sorption kinetics was investigated in a batch experiment, employing a glyphosate concentration of 0.84 mg L-1. The equilibration solution was 0.01 mol L-1 CaCl2 and the equilibration times were 0, 10, 30, 60, 120, 240, and 360 min. Sorption/desorption of glyphosate was also investigated using equilibrium batch experiments. Five different concentrations of the herbicide were used for sorption (0.42, 0.84, 1.68, 3.36, and 6.72 mg L-1) and one concentration for desorption. Glyphosate phytoavailability was analyzed in a 2 x 5 factorial scheme with two management systems and five glyphosate concentrations added to soil (0, 4.2, 8.4, 42.0, and 210.0 µg g-1) in a completely randomized design. Phytotoxicity symptoms in P. maximum were evaluated for different periods. The soil under both management systems showed high glyphosate sorption, which impeded its desorption and impaired the mineralization in the soil solution. Practically the total amount of the applied glyphosate was quickly sorbed (over 90 % sorbed within 10 min). Glyphosate bound to residues did not have adverse effects on P. maximum growth. The mineralization of glyphosate was faster under no-till and aminomethylphosphonic acid was the main glyphosate metabolite.

Nitrogen dynamics in soil management systems: II - mineralization and nitrification rates

Nitrogen is the main limiting factor in crop productivity and thereby soil management systems may change the mineralization and nitrification rates. In an experiment on soil management systems implemented in 1988 at the experimental station Fundação ABC, Ponta Grossa, in the central South region of the State of Paraná, inorganic N dynamics were examined to find a soil management strategy with a view to a sustainable environment. The objective of this study was to calculate the net mineralization and nitrification rates of soil N and the correlation with soil pH under management systems. Randomized complete block design was used, in split plots, in three replications. The following soil management systems (SMSs) were adopted in the plots: 1) conventional tillage (CT); 2) minimum tillage (MT); 3) no-tillage with chisel plow every three years (NT CH); and 4) continuous no-tillage (CNT). To evaluate the dynamics of inorganic N, samples were collected from sub-plots at different times (11 sampling times - T1 to T11). In the CNT and NT CH, the net mineralization rates were higher in the MT and CT systems in the 0-2.5 cm soil layer, while the nitrification rate was higher in the 2.5-5 cm layer. Soon after implementing the white oat management, the mineralization and nitrification rates in all soil layers were higher in the MT and CT systems. In the period of soybean development, in the 0-2.5 and 2.5-5 cm soil layers, the mineralization and nitrification rates were higher in the CNT and NT CH than in the MT and CT systems.

Evaluation of Bridge Replacement Alternatives for the County Bridge System, HR-365 August 1994

Recent reports have indicated that 23.5 percent of the nation's highway bridges are structurally deficient and 17.7 percent are functionally obsolete. A significant number of these bridges are on the Iowa county road system. The objective of the investigation described in this report was to identify, review and evaluate replacement bridges currently being used by various counties in Iowa and surrounding states. Iowa county engineers, county engineers in neighboring states as well as private manufacturers of bridge components, and regional precad prestressed concrete manufacturers were contacted to determine the most common replacement bridge types being used. Depending upon the findings of the review, possible improvements and/or new replacement bridge systems were to be proposed. A questionnaire was developed and sent to county engineers in Iowa and several counties in surrounding states. The results of the questionnaire showed that the most common replacement bridges in Iowa are the continuous concrete slab and prestressed concrete bridges. The primary reason these types are used is because of the availability of standard designs and because of their ease of maintenance. Counties seldom construct these types of bridges using their own labor forces, but instead contract the work. However, county forces are used to construct steel stringer, precast reinforced concrete and timber bridges. In general, 69 percent of the counties indicate an ability and willingness to use their own forces to design and construct relatively short span bridges (i.e., 40 A or less) provided the construction procedures are relatively simple. Several unique replacement bridge types used in Iowa that are constructed by county forces are documented and presented in this report. Sufficient details are provided to allow county engineers to determine if some of these bridges could be used to resolve some of their own replacement bridge problems. Where possible, cost information has also been provided. Each of these bridge types were evaluated for various criteria (e.g., cost effectiveness, conformance to AASI-ITO standards, range of sizes, etc.) by a panel of four Iowa county engineers; a summary of this critique is included. After evaluating the questionnaire responses from the counties and evaluating the various bridge replacement concepts currently in use, one new bridge replacement concept and one modification of a current Iowa county bridge replacement concept were developed. Both of these concepts would utilize county labor forces.

Low Water Stream Crossing: Design and Construction Recommendations, December 2001

Most counties have bridges that are no longer adequate, and are faced with large capital expenditure for replacement structures of the same size. In this regard, low water stream crossings (LWSCs) can provide an acceptable, low cost alternative to bridges and culverts on low volume and reduced maintenance level roads. In addition to providing a low cost option for stream crossings, LWSCs have been designed to have the additional benefit of stream bed stabilization. Considerable information on the current status of LWSCs in Iowa, along with insight of needs for design assistance, was gained from a survey of county engineers that was conducted as part of this research (Appendix A). Copies of responses and analysis are included in Appendix B. This document provides guidelines for the design of LWSCs. There are three common types of LWSCs: unvented ford, vented ford with pipes, and low water bridges. Selection among these depends on stream geometry, discharge, importance of road, and budget availability. To minimize exposure to tort liability, local agencies using low water stream crossings should consider adopting reasonable selection and design criteria and certainly provide adequate warning of these structures to road users. The design recommendations included in this report for LWSCs provide guidelines and suggestions for local agency reference. Several design examples of design calculations are included in Appendix E.

Job switching in ants: role of a kinase

Reproductive division of labour is a defining characteristic of eusociality in insect societies. The task of reproduction is performed by the fertile males and queens of the colony, while the non-fertile female worker caste performs all other tasks related to colony upkeep, foraging and nest defence. Division of labour, or polyethism, within the worker caste is organized such that specific tasks are performed by discrete groups of individuals. Ordinarily, workers of one group will not participate in the tasks of other groups making the groups of workers behaviourally distinct. In some eusocial species, this has led to the evolution of a remarkable diversity of subcaste morphologies within the worker caste, and a division of labour amongst the subcastes. This caste polyethism is best represented in many species of ants where a smaller-bodied minor subcaste typically performs foraging duties while larger individuals of the major subcaste are tasked with nest defence. Recent work suggests that polyethism in the worker caste is influenced by an evolutionarily conserved, yet diversely regulated, gene called foraging (for), which encodes a cGMP-dependent protein kinase (PKG). Additionally, flexibility in the activity of this enzyme allows for workers from one task group to assist the workers of other task groups in times of need during the colony's life.

Cover plants and mineral nitrogen: effects on organic matter fractions in an oxisol under no-tillage in the cerrado

Cover plants are essential for the sustainability of no-tillage systems in tropical regions. However, information on the effects of these plants and N fertilization on soil organic matter fractions is still scarce. This study evaluated the effect of cover crops with different chemical composition and of N topdressing on the labile and humified organic matter fractions of an Oxisol of the Cerrado (savanna-like vegetation). The study in a randomized complete block design was arranged in split-plots with three replications. Four cover species were tested in the plots and the presence or absence of N topdressing in the subplot. The following cover species were planted in succession to corn for eight years: Urochloa ruziziensis; Canavalia brasiliensis M. ex Benth; Cajanus cajan (L.) Millsp; and Sorghum bicolor (L.) Moench. In general, the cultivation of U. ruziziensis increased soil C levels, particularly of C in the humic acid and particulate organic C fractions, which are quality indicators of soil organic matter. The C in humic substances and mineral organic C accounted for the highest proportions of total organic C, demonstrating the strong interaction between organic matter, Fe and Al oxides and kaolinite, which are predominant in these weathered soils of the Cerrado.

Less Risk, More Effort : Demand Risk Allocation in Incomplete Contracts

This article investigates the allocation of demand risk within an incomplete contract framework. We consider an incomplete contractual relationship between a public authority and a private provider (i.e. a public-private partnership), in which the latter invests in non-verifiable cost-reducing efforts and the former invests in non-verifiable adaptation efforts to respond to changing consumer demand over time. We show that the party that bears the demand risk has fewer hold-up opportunities and that this leads the other contracting party to make more effort. Thus, in our model, bearing less risk can lead to more effort, which we describe as a new example of âeuro~counter-incentivesâeuro?. We further show that when the benefits of adaptation are important, it is socially preferable to design a contract in which the demand risk remains with the private provider, whereas when the benefits of cost-reducing efforts are important, it is socially preferable to place the demand risk on the public authority. We then apply these results to explain two well-known case studies.