836 resultados para Design and Technology
Resumo:
In 2002, The Ontario Federation of School Athletic Associations (OFSAA) identified that in providing extracurricular sport programs schools are faced with the 'new realities' of the education system. Although research has been conducted exploring the pressures impacting the provision of extracurricular school sport (Donnelly, Mcloy, Petherick, & Safai, 2000), few studies within the field have focused on understanding extracurricular school sport from an organizational level. The focus of this study was to examine the organizational design (structure, systems, and values) of the extracurricular sport department within three Ontario high schools, as well as to understand the context within which the departments exist. A qualitative multiple case study design was adopted and three public high schools were selected from one district school board in Ontario to represent the cases under investigation. Interviews, observations and documents were used to analyze the extracurricular sport department design of each case and to better understand the context within which the departments exist. As the result of the analysis of the structure, systems and values of each case, two designs emerged- Design KT1 and Design KT2. Differences in the characteristics of design archetype KT1 and KT2 centered on the design dimension of values, and therefore this study identified that contrasting organizational values reflect differences in design types. The characteristics of the Kitchen Table archetype were found to be transferable to the sub-sector of extracurricular school sport, and therefore this research provides a springboard for further research in organizational design within the education sector of extracurricular high school sport. Interconnections were found between the data associated with the external and internal contexts within which the extracurricular sport departments exist. The analysis of the internal context indicated the important role played by organizational members in shaping the context within which the departments exist. The analysis of the external context highlighted the institutional pressures that were present within the education environment. Both political and cultural expectations related to the role of extracurricular sport within schools were visible and were subsequently used by the high schools to create legitimacy and prestige, and to access resources.
Resumo:
The work to be presented herein illustrates several important facts. First, the synthesis of BIBOL (19), a 1,4-diol derived from the monoterpene camphor has allowed us to demonstrate that oxidative dimerizations of enolates can, and do proceed with nearly complete diastereoselectivity under kinetically controlled conditions. The yield of BIBOL is now 50% on average, with a 10% yield of a second diastereomer, which is likely the result of a non-kinetic hydride reduction, thereby affording the epimeric alcohol, 20, coupled on the exo face of camphor. This implies the production of 60% of a single coupling diastereomer. No other diastereomers from the reduction were observed. The utility of BEBOL has been illustrated in early asymmetric additions of diethylzinc to aryl aldehydes, with e.e.'s as high as 25-30%. '^' To further the oxidative coupling work, the same methodology which gave rise to BIBOL was applied to the chiral pool ketone, menthone. Interestingly, this gave an excellent yield of the a-halohydrin (31), which is the result of a chlorination of menthone. This result clearly indicates the high stereoselectivity of the process regardless of the outcome, and has illustrated an interesting dichotomy between camphor and menthone. The utility of the chlorination product as a precursor other chiral ligands is currently being investigated. > ' Finally, a new series of 1,3-diols as well as a new aminoalcohol have successfully been synthesized from highly diastereoselective aldol/mannich reactions. Early studies have indicated their potential in asymmetric catalysis, while employing pi-stack interactions as a means of controlling enantioselective aldol reactions.
Resumo:
This descriptive-exploratory study examined factors which were perceived by students at a College of Applied Arts and Technology (CAAT) campus as influencing them in choosing to come or not to come for personal counselling and why they would or would not retum. A total of 250 students selected through a sample of convenience were surveyed. A questionnaire survey was conducted with quantitative data collected using a 4-point, forced-choice Likert scale and yes/no questions and qualitative data collected using open-ended questions and invited comments. The responses were analyzed using means and modes for the Likert responses and percentages for the yes/no and check-off questions. The narrative responses were subjected to content analysis to identify themes. The mean score findings on factors influencing students to come for personal counselling were at or close to the mid- point of 2.5. Personal distress was the only variable found to have a negative response, meaning students would not come to counselling if they were in personal distress. On factors that would keep them from choosing to come to counselling, students seemed to trust counsellors and feel accepted by them and rejected the notion that peer pressure or the first session being unhelpful would keep them away from counselling. The counsellor's relationship with the student is the major determinant for repeat sessions. When asked what factors would influence students to not retum for personal counselling, students rejected the variables of peer pressure, the extra time needed for counselling, and not getting what they wanted in a session, but, in one instance, indicated that variables regarding the counselling relationship would keep them from returning.
Resumo:
Ontario Colleges of Applied Arts and Technology (CAATs) are currently in the process of restructuring to ensure quality, accountability, and accessibility of college education. References to learner involvement and self-directed learning are prevalent. "Alternative delivery" and "paradigm shift" are current buzzwords within the Ontario CAAT system as an environment is created supportive of change. Instability of funding has also dictated a need for change. Therefore, a focus has become quality of learning with less demand on public resources. This qualitative case study was conducted at an Ontario CAAT to gather descriptive, perceptual data from post-secondary community college educators who were identified as supportive of self-directed learning and from post-secondary, traditional-aged college students who were perceived by their educators to be selfdirected learners. This college was selected because of initiatives to modify its academic paradigm to encourage what was reputed in the Ontario CAAT system to be self-directed learning. The purpose of this study was to investigate how postsecondary, traditional-aged college students and their educators perceive self-directed learning as part of the teaching-learning experience within a community college setting. Educator participants of the study were selected based on the results of a teaching and learning survey intended to identify educators supportive of self-directed learning. A total of 317 surveys were distributed to every full-time educator at the sample college; 192 completed surveys were returned for a return rate of 61 %. Of these, 8% indicated instructional beliefs and values supportive of self-directed learning. A purposive sample of six educators was selected using a maximulp variation sampling strategy. A network selection sampling strategy was used to select a purposive sample of seven post-secondary students who were identified by the sample educators as selfdirected learners. The results of the study show that students and educators have similar perspectives and operating definitions of self-directed learning and all participants believe they either practice or facilitate self-directed learning. However, their perspectives and practices are not consistent with the literature which emphasizes learner autonomy or control in course structure and content. A central characteristic of the participants represented in this study is the service-oriented professions with which each is associated. Experientiallearning opportunities were highly valued for the options provided in increasing learner independence and competencies in reflective practice. Although there were discrepancies between espoused theory and theory in practice in terms of course structure, the process of self-directed learning was being practiced and supported outside the classroom structure in clinical settings, labs and related experiences.
Resumo:
This qualitative inquiry explored 7 undergraduate students' attitudes, habits, and knowledge of consumerism, fashion design, and sustainability. The postmodern study employed crystallization as its methodological framework to gain insight into how participants' knowledge is manifested in their daily habits, and used 4 methods of data gathering: semistructured interviews, visual exercises, journal entries, and the researcher's own reflections. Four major themes emerged: Knowledge-Concepts Linked and Fragmented; Dissonance Between Knowledge Versus Attitudes and Consumer Habits; Surrendering to the Unsustainable Structures; Design Process and Caring Attitude. Findings indicate that participants possessed some knowledge of sustainability but lacked a well-rounded understanding of environmental and humanitarian implications of Western consumer society. Findings also reveal a dissonance between participants' knowledge and attitudes-affecting how their knowledge influences their behaviour-and how reflection, creative thinking, and drawing initiate change in participants' underlying attitudes. Recommendations are made to merge a variety of theoretical frameworks into the educational system in order to create curricula that offer a holistic overview and unique insights into sustainability challenges, particularly in specialized areas of the fashion industry.
Resumo:
1. Triarylamminium radical-cation complexes. The detailed study of manganese, copper and nickel metal-radical complexes with triarylamminium ligands was conducted. Stable, neutral and pseudo-octahedral coordination monometallic complexes with simple monodentate 2,2`-bipyridine ligand containing a redox-active N,N`-(4,4`-dimethoxydiphenyl-amino) substituent were synthesized and fully characterized. The one-electron oxidation process and formation of persistent radical-cation complexes was observed by cyclic voltammetry and spectroelectrochemical measurements. Evans method measurements were performed with radical-cation complexes generated by chemical one-electron oxidation with NOPF6 in acetonitrile. The experimental results indicate ferromagnetic coupling between metal and triarylamminium cation in manganese (II) complex and antiferromagnetic coupling in nickel (II) complex. This data is supported by DFT calculations which also lend weight to the spin polarization mechanism as an operative model for magnetic exchange coupling. Neutral bimetallic complexes with a new ditopic ligand were synthesized and fully characterized, including magnetic and electrochemical studies. Chemical oxidation of these precursor complexes did not generate radical-cations, but dicationic complexes, which was confirmed by UV-vis and EPR-experiments, as well as varied temperature magnetic measurements. DFT calculations for radical-cation complexes are included. A synthetic pathway for polytopic ligand with multiple redox-active triarylamine sites was developed. The structure of the ligand is presumably suitable for -spin polarization exchange model and allows for production of polymetallic complexes having high spin ground states. 2. Base-catalyzed hydrosilylation. A simple reductive base-catalyzed hydrosilation of aldehydes and ketones was adapted to the use of the cheap, safe, and non-toxic polymethylhydrosiloxane (PMHS) instead of the common PhSiH3 and (EtO)3SiH, which present significant cost and safety concerns, respectively. The conversion of silane into pentacoordinate silicate species upon addition of a base was studied in details for the cases of phenyl silane and PMHS and is believed to be essential for the hydrosilylation process. We discovered that nucleophiles (a base or fluoride-anion) induced the rearrangement of PMHS and TMDS into light silanes: MeSiH3 and Me2SiH2, respectively. The reductive properties of PMHS under basic conditions can be attributed to the formation of methyl silane and its conversion into a silicate species. A procedure for the generation of methyl silane and its use in further efficient reductions of aldehydes and ketones has been developed. The protocol was extended to the selective reduction of esters and tertiary amides into alcohols and aldimines into amines with good isolated yields and reduction of heterocyclic compounds was attempted.
Resumo:
The article discusses the importance of design and the people who run handling systems.
Resumo:
The article focuses on the following: Cattle Perception, How to prevent Balking, Solid Fences, Flight Zone, Curved Race more Efficient, Curved Race and Crowd Pen Dimensions, Loading Ramps, Working Corral for a Large Ranch, Squeeze Chutes and Headgates, Calf Tables, Artificial Insemination Chute, New Restraint Ideas, Dipping Vats, Bruise and Injury Prevention, Washable Facilities.
Resumo:
UANL
Resumo:
Dans les sphères du développement durable, des modèles d’affaires et du design de produit, certains leviers rendent le croisement de ces trois sphères de plus en plus pertinent. Au croisement de ces trois sphères se trouve une opportunité de comprendre les relations existantes entre le design de produit et les modèles d’affaires afin d’aider les décideurs à développer des solutions davantage durables. L’approche méthodologique de cette recherche utilise un système complexe et est basée sur un paradigme pragmatique. En vue de répondre à la question « Dans quelle mesure des modèles d’affaires et le design de produit sont liés dans un contexte de développement durable? », cette recherche a soigneusement analysé trois cas: Better Place, une compagnie californienne ayant développé une infrastructure permettant le chargement des voitures électriques; Interface Inc., un manufacturier mondial de tuiles de tapis commerciales établi à Atlanta; et Métacycle, un concept d’entreprise développé par une équipe de chercheurs en design à Montréal. Chaque cas a été analysé en corrélant des aspects du design de produit à des éléments de leur modèle d’affaires. Les résultats montrent que dans le contexte du développement durable, le design de produit et les modèles d’affaires sont interdépendants. Les résultats peuvent être résumés en six points: il existe des relations applicables universellement; les innovations de design substantielles jouent un rôle important dans le développement durable; la « durabilité » peut être une qualité émergente d’un modèle d’affaires; les partenariats peuvent être vitaux pour l’intégration des systèmes; un modèle de services a des bénéfices et des limitations considérables; le design peut agir comme levier à l’utilisation d’énergies renouvelables. Pratiquer simultanément l’innovation du modèle d’affaires et du produit peut apporter une valeur ajoutée, susciter des opportunités et augmenter l’efficience sur plusieurs facettes. Toutefois, les risques et les coûts de tels procédés sont souvent très élevés. En aidant à comprendre et définir comment les trois sphères mentionnées plus tôt sont interdépendantes, cette recherche pourrait idéalement inspirer des recherches supplémentaires sur le sujet. L’application par des organisations de la méthodologie et des apprentissages résultant de cette recherche peut permettre à d’autres d’utiliser le croisement entre l’innovation de produit et l’innovation du modèle d’affaires afin de résoudre des enjeux sociaux et environnementaux complexes.
Resumo:
La présente recherche a pour objectif d’étudier les effets que peuvent exercer la conception du travail sur le type de conflit qui émerge en milieu de travail. La notion de conception du travail se divise en trois dimensions, soit les caractéristiques reliées à la tâche, les caractéristiques reliées aux connaissances et les caractéristiques sociales. Ces dimensions sont mises en relation avec les deux types de conflit en milieu de travail, soit le conflit relié à la tâche et le conflit relié à la relation. Cette recherche vise également à vérifier l’effet modérateur des traits de personnalités sur les relations entre les dimensions de la conception du travail et celles du conflit en milieu de travail. Cette recherche est basée sur 473 participants qui occupent un emploi rémunéré et qui ont vécu une situation de conflit en milieu de travail allant jusqu’à 6 mois avant la période de sondage, allant du 14 au 18 janvier 2012. Les résultats indiquent qu’il n’y a pas de relations particulières entre la conception du travail et le type de conflit en milieu de travail. En ce qui a trait aux effets des traits de personnalité, les résultats indiquent que ces variables n’ont aucuns effets modérateurs sur la relation entre la conception du travail et le type de conflit en milieu de travail. Globalement, les résultats ne démontrent aucune relation entre la conception du travail et les types de conflit en milieu de travail, ou les effets modérateurs que les traits de personnalités peuvent avoir sur ces relations.
Science and technology of rubber reclamation with special attention to NR-based waste latex products
Resumo:
A comprehensive overview of reclamation of cured rubber with special emphasis on latex reclamation is depicted in this paper. The latex industry has expanded over the years to meet the world demands for gloves, condoms, latex thread, etc. Due to the strict specifications for the products and the unstable nature of the latex as high as 15% of the final latex products are rejected. As waste latex rubber (WLR) represents a source of high-quality rubber hydrocarbon, it is a potential candidate for generating reclaimed rubber of superior quality. The role of the different components in the reclamation recipe is explained and the reaction mechanism and chemistry during reclamation are discussed in detail. Different types of reclaiming processes are described with special reference to processes, which selectively cleave the cross links in the vulcanized rubber. The state-of-the-art techniques of reclamation with special attention on latex treatment are reviewed. An overview of the latest development concerning the fundamental studies in the field of rubber recycling by means of low-molecular weight compounds is described. A mathematical model description of main-chain and crosslink scission during devulcanization of a rubber vulcanizate is also given.
Resumo:
Information communication technology (IC T) has invariably brought about fundamental changes in the way in which libraries gather. preserve and disseminate information. The study was carried out with an aim to estimate and compare the information seeking behaviour (ISB) of the academics of two prominent universities of Kerala in the context of advancements achieved through ICT. The study was motivated by the fast changing scenario of libraries with the proliferation of many high tech products and services. The main purpose of the study was to identify the chief source of information of the academics, and also to examine academics preference upon the form and format of information source. The study also tries to estimate the adequacy of the resources and services currently provided by the libraries.The questionnaire was the central instrument for data collection. An almost census method was adopted for data collection engaging various methods and tools for eliciting data.The total population of the study was 957, out of which questionnaire was distributed to 859 academics. 646 academics responded to the survey, of which 564 of them were sound responses. Data was coded and analysed using Statistical Package for Social Sciences (SPSS) software and also with the help of Microsofl Excel package. Various statistical techniques were engaged to analyse data. A paradigm shift is evident by the fact that academies push themselves towards information in internet i.e. they prefer electronic source to traditional source and the very shift is coupled itself with e-seeking of information. The study reveals that ISB of the academics is influenced priman'ly by personal factors and comparative analysis shows that the ISB ofthc academics is similar in both universities. The productivity of the academics was tested to dig up any relation with respect to their ISB, and it is found that productivity of the academics is extensively related with their ISB. Study also reveals that the users ofthe library are satisfied with the services provided but not with the sources and in conjunction, study also recommends ways and means to improve the existing library system.
Resumo:
Diese Arbeit umfaßt das elektromechanische Design und die Designoptimierung von weit durchstimmbaren optischen multimembranbasierten Bauelementen, mit vertikal orientierten Kavitäten, basierend auf der Finiten Element Methode (FEM). Ein multimembran InP/Luft Fabry-Pérot optischer Filter wird dargestellt und umfassend analysiert. In dieser Arbeit wird ein systematisches strukturelles Designverfahren dargestellt. Genaue analytische elektromechanischer Modelle für die Bauelemente sind abgeleitet worden. Diese können unschätzbare Werkzeuge sein, um am Anfang der Designphase schnell einen klaren Einblick zur Verfügung zu stellen. Mittels des FEM Programms ist der durch die nicht-lineare Verspannung hervorgerufene versteifende Effekt nachgeforscht und sein Effekt auf die Verlängerung der mechanischen Durchstimmungsstrecke der Bauelemente demonstriert worden. Interessant war auch die Beobachtung, dass die normierte Relation zwischen Ablenkung und Spannung ein unveränderliches Profil hat. Die Deformation der Membranflächen der in dieser Arbeit dargestellten Bauelementformen erwies sich als ein unerwünschter, jedoch manchmal unvermeidbarer Effekt. Es zeigt sich aber, dass die Wahl der Größe der strukturellen Dimensionen den Grad der Membrandeformation im Falle der Aktuation beeinflusst. Diese Arbeit stellt ein elektromechanisches in FEMLAB implementierte quasi-3D Modell, das allgemein für die Modellierung dünner Strukturen angewendet werden kann, dar; und zwar indem man diese als 2D-Objekte betrachtet und die dritte Dimension als eine konstante Größe (z.B. die Schichtdicke) oder eine Größe, welche eine mathematische Funktion ist, annimmt. Diese Annahme verringert drastisch die Berechnungszeit sowie den erforderlichen Arbeitsspeicherbedarf. Weiter ist es für die Nachforschung des Effekts der Skalierung der durchstimmbaren Bauelemente verwendet worden. Eine neuartige Skalierungstechnik wurde abgeleitet und verwendet. Die Ergebnisse belegen, dass das daraus resultierende, skalierte Bauelement fast genau die gleiche mechanische Durchstimmung wie das unskalierte zeigt. Die Einbeziehung des Einflusses von axialen Verspannungen und Gradientenverspannungen in die Berechnungen erforderte die Änderung der Standardimplementierung des 3D Mechanikberechnungsmodus, der mit der benutzten FEM Software geliefert wurde. Die Ergebnisse dieser Studie zeigen einen großen Einfluss der Verspannung auf die Durchstimmungseigenschaften der untersuchten Bauelemente. Ferner stimmten die Ergebnisse der theoretischen Modellrechnung mit den experimentellen Resultaten sehr gut überein.