Investigation of chemical changes in sealers during application of the warm vertical compaction technique

Aim To assess (i) heat generated by pluggers during warm vertical compaction of gutta-percha and investigation of temperature changes on the external root surface during canal filling, and (ii) the chemical changes of root canal sealers induced by heat.Methodology Four sealers, namely AH Plus, MTA Plus and two other experimental sealers based on tricalcium silicate, were characterised. External temperatures generated on the root surface during warm vertical compaction of gutta-percha with different sealers inside the root canal were monitored using an infrared thermography camera. Chemical changes induced by heating the sealers were assessed by Fourier transform infrared (FT-IR) spectroscopy.Results MTA Plus and the experimental sealers were composed of a cement and radiopacifier, with epoxy resin or a water-soluble polymer as dispersant, whilst AH Plus was epoxy resin-based. The heat generated at the tips of the continuous wave pluggers was found to be lower than the temperature set and indicated on the device LCD display. The sealers reduced the heat generated on the external root surfaces during the heating phase. AH Plus sustained changes to its chemical structure after exposure to heat, whilst the other sealers were unaffected.Conclusions The temperatures recorded at the tips of continuous wave pluggers varied with their taper and were lower than the temperature set on the System B LCD display. Root canal sealers reduced the dissipation of heat generated during warm vertical compaction, with the temperature at the external root surface maintained at 37-41 degrees C, a temperature below that is necessary to cause irreversible damage to bone and periodontium. The use of AH Plus sealer during warm vertical compaction techniques results in chemical changes in the sealer. The effect on sealer properties needs to be further investigated.

Scaling properties and universality in a ratchet system

Critical exponents that describe a transition from unlimited to limited diffusion for a ratchet system are obtained analytically and numerically. The system is described by a two dimensional nonlinear mapping with three relevant control parameters. Two of them control the non-linearity while the third one controls the intensity of the dissipation. Chaotic attractors appear in the phase space due to the dissipation and considering large non-linearity are characterised by the use of Lyapunov exponents. The critical exponents are used to overlap different curves of average momentum (dynamical variable) onto a single plot confirming a scale invariance. The formalism used is general and the procedure can be extended to different systems.

DYNAMICAL JUMP ATTENUATION IN A NON-IDEAL SYSTEM THROUGH A MAGNETORHEOLOGICAL DAMPER

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da queda de granizo em Guarulhos-SP e seus impactos socioeconômicos

The climate and weather have direct implications on society, are factors that can to regulate or restrict human occupation in a determined space. In this way, studies of climate and weather are justified to be extremely necessary for urban planning and economic activities, especially agriculture. The precipitation of hail, which enters in the classification of severe storm, causes large, direct and indirect impacts on society, mainly when it occurs in urban areas. This work aims to study the precipitation of hail, explain what is a severe storms and how hail is formed in clouds, making use of a literature review in geography and also in weather sciences. It is also an aim of this work analyze the genesis, evolution and dissipation of a specific case of precipitation of hail occurred in the metropolitan region of São Paulo, especially in Guarulhos, on 21st of September 21 of 2010, through the use of GOES-12’ satellite’s images and the use of São Roque’s weather radar. And in this way, show the potential impact of hail storms in society and contribute to a greater preparedness of the population, urban planners associations and emergency management, such as municipalities, the civil defense and fireman

Efeitos de campos elétrico e magnético em um sistema dissipativo pulsante

The main idea of this work is to understand and analyze the dynamical aspects of the motion of a particle moving in the annular billiard, which corresponds to two circles of radius R and r (rdissipation. Our initial results conduct us to believe that electrical field can contribute to the increasing of mean energy, and a magnetic field applied to the vertical axis of coordinate (what guarantees the particle do not travel away the billiard’s plane) uses to arrest the particle to the whispering gallery orbits and do not contribute to the Fermi acceleration indeed. However, in presence of the electric field, to same values, the magnetic one together can improve this referred process, obtaining greater energy values to the same number of iterations. These results are applied to the concentric case, that was reported did not haven any significant energy gain on the free particle motion

Crises de fronteira e estruturas complexas no espaço de parâmetros em um mapeamento dissipativo bidimensional

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

WiMAX interoperabilidade mundial para acesso de microondas

This paper presents a technique dubbed WiMAX radio link, the IEEE 802.16 was completed in October 2001 and published on April 8, 2002 and is constantly updated, this technology specifies an interface for wireless metropolitan networks (WMAN) and is under control of the WiMAX Forum, which is a group of companies responsible for the dissipation of this technology in the world, the great benefit of this standard is to offer broadband Internet connection in areas where there is no infrastructure such as fiber optics that has a cost higher. The main purpose of this paper is to present the theoretical and technical characteristics of this technology for both the standard for fixed and mobile standard, regulation of frequency bands by the FCC and description of the physical layer, through to basic concepts are used in many other types of radio link and technologies have been adapted and updated for this little-known standard, allowing a greater range and speed, which are specified and differentiate these advancements is one of the contributions of the work done here. After the theoretical conceptualization stage, a real case study has been inserted in this work to demonstrate the effectiveness of this technology deployed. The idea of presenting this case study is linked to a better view of the use of standard in the market, nationwide

Protese total fixa em função imediata confeccionada em resina composta indireta

Immediate functioning of osseointegrated implants has been widely employed in edentulous patients due to its safety and high predictability. However, viability and success of immediate-loaded implants is defined by factors such as number of implants, distribution and splinting, as well as reduction of oblique loads and excessive occlusal contacts. The indirect composite resin-modified glass enable building of a highly aesthetic prosthesis, combining satisfactory resistance and better force dissipation on occlusal loading. This article describes a resin composite, mandibular fixed prosthesis on osseointegrated implants in immediate function.

Dynamics of a charged particle in a dissipative Fermi-Ulam model

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

28-mer fragment derived from enterocin CRL35 displays an unexpected bactericidal effect on listeria cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Time differential perturbed angular correlation (TDPAC) study of some hafnium glycolate complexes

Time differential measurements of the 133-482 keV γ-γ angular correlation of 181Ta have been performed in solid hafnium complexes of the type [Hf(glycol)4] (glycol = p-chloromandelate, p-bromomandelate, b-naphthylglycolate and mandelate). The quadrupolar frequencies (ωQ) were found to increase within the series. This behaviour was explained by supposing a dissipation of electronic density at the metal level, caused by an increase in intermolecular hydrogen bonding in the complexes throughout the series studied. These results seem to agree with complementary data from IR spectroscopic studies. © 1988.

Anelastic behavior due to interstitial oxygen in SmBa(2)Cu(3)O7-delta

The composite SmBa2Cu3O7-delta (Sm-123), obtained by the substitution of the ion Y for Sm in the very well known and studied YBa2Cu3O7-delta (Y-123), is potentially attractive for better understanding superconductivity mechanisms and for its applications as electronic devices. Sm-123 samples show higher critical temperatures than Y-123 ones do and a larger solubility of Sm in Ba-Cu-O solvent, which makes their growth process faster. When oxygen is present interstitially, it strongly affects the physical properties of the material. The dynamics of oxygen can be investigated by anelastic spectroscopy measurements, a powerful technique for the precise determination of the oscillation frequency and the internal friction when atomic jumps are possible. Anelastic spectroscopy allows determining the elasticity modulus (related to the oscillation frequency) and the elastic energy loss (related to the internal friction) as a function of the temperature. The sample was also investigated by X-ray diffraction (XRD), scanning electronic microscopy (SEM), and electric resistivity. The results obtained show a thermally activated relaxation structure composed by at least 3 relaxation processes. These processes may be attributed to the jumps of oxygen atoms present of the Cu-O plane in the orthorhombic phase.

Leis de escala para o mapa padrão dissipativo

Pós-graduação em Física - IGCE

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

Oclusão em prótese sobre implante - parte I

Osseointegrated implants have specific nature distinguish them from natural teeth making them more susceptible to the efforts generated by mastication. The absence of periodontal ligament, which absorbs the masticatory forces and allows the movement of the teeth interfere with the reception of occlusal loads and therefore the predictability of implants. In the boneimplant interface did not occur the phenomena of dissipation of impact, even the movement induced. Thus, during planning and installation of implant prosthesis, the type and characteristics of occlusal pattern adopted should be established with criteria to be no grounds for future failures. In this regard we highlight the occlusal overload generated by several reasons like the presence of premature contacts, interference during motion excursive, deleterious habits and inappropriate extensions on cantilevers. Thus, the objective is to provide a review of the literature regarding the importance of occlusion in oral rehabilitation with implants. Factors to be considered in establishing a favorable occlusion, consistent with prostheses on implants will be described