Utilização de dados e técnicas de Sensoriamento Remoto no monitoramento da infestação por plantas aquáticas em reservatório de hidrelétrica

As an effect of the imbalance caused by the damming of rivers and pollution, it has been observed a growing aquatic plants infestation in reservoirs for the generation of electricity. In addition to power generation, these sites have also been used for various other purposes, including recreation, attracting water and navigation. Thus it is important to evaluate these water bodies periodically, in order to verify the leading conditions to the growth of algae, plants and other organisms. In this sense, Remote sensing technology can be a valuable tool for mapping and monitoring the occupation of land in the vicinity of the water body and the optical properties of water, to provide subsidies for the effective management of these aquatic environments. This paper aims to perform the monitoring of the occurrence of aquatic plants in Salto Grande Hydropower Reservoir, located in Americana (SP) and, periodically, map the occupation of land in the vicinity of the water body, through multispectral images taken by sensors on the satellites Landsat series in seven consecutive years: 2004, 2005, 2006, 2007, 2008, 2009 and 2010. The adopted methodological procedure included the images data and the classification of multispectral images to map, every year, the location and extension of the area infested by aquatic plants and the occupation of land

Estudo da distribuição e das densidades larvais do bivalve invasor Limnoperna fortunei (Dunker, 1857) nos principais corpos d’água da bacia do rio da Prata

O mexilhão-dourado (Limnoperna fortunei) é um bivalve de água doce pertencente à família Mytilidae. Originário de rios e arroios da China e do sudeste asiático, foi introduzido acidentalmente na América do Sul em 1991, no estuário do rio da Prata, provavelmente através de água de lastro. Como encontrou condições propícias para o seu desenvolvimento, se expandiu através dos rios Uruguai, Paraná e Paraguai, sendo atualmente o principal responsável pelo macrofouling em ecossistemas de água doce do continente. O presente estudo compreende uma área de grande extensão na bacia do Rio da Prata, onde foram amostrados pontos estratégicos nos rios Paraná (e seus principais afluentes), Uruguai e Paraguai. A partir de coletas de organismos do plâncton, realizadas por arrasto vertical, foram quantificadas as densidades de larvas de L. fortunei em cada local de amostragem. Assim, obteve-se um panorama atual da ocorrência do mexilhão, registrando-se, inclusive, alguns limites de sua distribuição. As densidades mostraram-se, no geral, elevadas, provavelmente em decorrência do período de amostragem (verão 2010), onde a atividade reprodutiva da espécie é maior devido às altas temperaturas. Porém, grandes variações ao longo da bacia foram registradas, o que pode estar relacionado ao grau de antropização, disponibilidade de substratos, velocidade da corrente, tempo de introdução, entre outras variáveis

Efeitos e tendências dos processos de convergência nos modelos de produção jornalística: ecossistema, audiência, instituições e agentes locais em análise

The research aims to analyze the main changes in the concepts of the processes of production and consumption of news content information. The theoretical framework used will be the new consequent social, economic and technological paradigms of the current scenario of convergence of platforms, content and languages. The research aims to investigate the changes in the macro environment of journalistic production and, therefore, examine whether the local flow of news content meets the requirements of a new public consumption target set by the new Brazilian generations, composed of young people influenced by the cultures of computing, audiovisual communication and also by economic and cultural globalization. As expansion of the analyzes sought to verify the impact of these changes in the current models of traditional media, as well as the interference caused and trends in models of existing production. Also a case study is performed on this production flow in comparison with current market research of Jornal da Cidade (JC) of the city of Bauru (SP), the main media of the Grupo Comunicação. The intent of the approach will be to establish some preambles to assist in bringing the theory with the practical impacts on journalistic production, its agents, institutions and the workplace

Comportamento de forrageamento de Lochmias Nematura (Aves, Furnariidae)

O joão-porca (Lochmias nematura) é uma ave pertencente à família Furnariidae. Tem coloração predominantemente marrom, com pintas brancas em seu peito e ventre, sua cauda é preta e apresenta o supercílio branco. Habita a margem de córregos e riachos, evitando áreas com maior intensidade de luz. Seu canto é um trinado agudo e forte, que tende a suplantar o ruído gerado pela movimentação da água nesses ambientes. Seu nome popular é decorrente de seus hábitos alimentares: caça artrópodes na margem dos corpos d’água e em poças lamacentas e lodosas. Sua dieta e seu comportamento de caça são pouco conhecidos, o que impulsionou a realização deste estudo. Para tanto realizamos buscas ativas por indivíduos desta espécie ao longo de leitos na Serra do Japi, município de Jundiaí, no entorno da Floresta Estadual Edmundo Navarro de Andrade e no Sítio Esperança, município de Rio Claro. Estes locais foram escolhidos devido à facilidade de detecção da espécie. Para tornar as anotações em campo mais rápidas foram utilizadas planilhas com os parâmetros a serem analisados. Os parâmetros analisados foram manobra de captura, manipulação, item alimentar, tamanho em relação ao bicho da ave, distância da margem ao local de captura, substrato de captura e as características principais do substrato e do corpo d’água. Somando-se a isso foram levantadas todas as fotografias postadas no site WikiAves (www.wikiaves.com.br) que mostrassem Lochmias nematura com presas em seu bico, obtendo-se uma dieta mais completa. Isto mostrou que a dieta da espécie é muito mais diversificada do que o previsto pela literatura aferido através da dissecção estomacal. Seus principais itens alimentares são aranhas, oligoquetos, decápodes, larvas de tricópteros, larvas de odonatos, coleópteros, formigas, girinos e até mesmo anuros adultos... (Resumo completo, clicar acesso eletrônico abaixo)

Modelagem matemática e simulação computacional de derrames de óleo em corpos d'água: um estudo de caso na região do Porto de Santos

The objective of this work is to accomplish studies of mathematical modeling and computational simulation of oil spills in water bodies. For this reason, a case study in the region of the Port of Santos was developed using the softwares SisBAHIA and ADIOS2 for the simulation of different hypothetical scenarios of oil spilling on the surface of water, aiming to obtain information that contribute to the reduction of the possible environmental impacts that can be caused by such accidents. The results generated in the different simulations had shown that the obtained data can be extremely useful to subsidize the elaboration of mitigation plans, the mapping of risk areas or even the proposal of emergencial strategies in cases of real accidents, configuring the modeling and the simulation as important and modern tools for the environmental planning and management.

Corpos intrusivos básicos na coluna sedimentar Permo-Carbonífera no vale do rio Corumbataí

As rochas intrusivas básicas associadas a Formação Serra Geral na porção sul do município de Rio Claro e norte de Piracicaba configuram geometrias na forma de diques e soleiras. Estes corpos estão associados à uma parte da Bacia Sedimentar do Paraná que foi deformada por eventos tectônico que resultaram em trends preferencias NW-SE, condicionando a estratigrafia, a intrusão e geometria dos corpos de diabásio e formação da estrutura domática do alto de Pitanga. Os corpos intrusivos tem em sua maioria a forma de soleiras e em menor quantidade a forma de diques. A compreensão destes corpos é importante para o entendimento da estratigrafia da área conhecida como domo de Pitanga na região de Rio e Piracicaba

A prática de treinamento dos corpos dentro da empresa: um estudo sobre uma ferramenta de controle da qualidade

Befor the vast economical growth and wild scientific and technological development, the companies are demanding, more and more qualification and acting of the services rendered by their employees. Like this, tasks are restricted the they be done with excellence, because the companies are always controlling the worker's development. They are several the tools used by the companies, as acting indexes to control the course of the worker's activities or certain section, integrations for new employees with the objective to present the line of work of the company so that the new employee is framed in these patterns, trainings offered for the employees to carry out their services with quality and compromising, evaluations of year end in order to test the worker's knowledge and to demand better results, finally, the companies hope the employee integrates normativamente into the reality of the company, in way to contribute for the atingimento of the organizational strategies, always collecting for this to obtain the best results and contribute to the growth of the company. This way, that research will present a tool of control of the total quality applied in a company in Rio Clearing's city and that it is managed by an educador. They will be verified the objectives that the company has in relationship a this control, the worker's subjectivity as participant subject of the tool of control of the System of Administration of the Quality and the worker's different glances before these aspects throught an interview.

Corpos humanos: Re-desenho de silo e armazéns às margens do leito férreo da cidade de Presidente Prudente - Centro de Artes Corporais

Não disponível

Avaliação da importância de habitats secundários para a manutenção de abelhas silvestres em áreas agrícolas

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Relação entre os atributos funcionais e características do habitat em comunidades de girinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fipronil e produtos de degradação: adaptação de método analítico e caracterização de amostras de água, solo e sedimento da Bacia Hidrográfica do Turvo/Grande

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Captura gravitacional de pequenos corpos por arrasto em um gás modelado usando equações hidrodinâmicas

In this work we have developed an apparatus in order to study the capture of asteroids by planets surrounded by a gas envelope during y-by, to do this we have brought an innovation by using a hydrodynamical gas. We began such project by studying particles trajectories with a code based on the analytical gas. After being used to this model we have started a process to elaborate a code which uses the gas in a numerical way. The hydrodynamical gas is described by equations which are not solved analytically. Therefore, it was used an algorithm able to model the gas by keeping all information of the gas in cells. Thus we have made a code to read such cell`s information and then to solve all calculations. Once this process is done, the program inform us all date about the simulated trajectories

Caracterização do fator de intensidade de tensão em corpos trincados através do método dos elementos finitos

The industry generally has sought materials with high mechanical resistance, low density, thermal stability and corrosion resistance. In the aerospace industry, for example, the use of aluminum alloys, such as Al 2024-T351 and Al 7075-T7351, have become essential. However, the use of these materials often do not resulted in a satisfactory performance of the component, since the presence of cracks can cause total rupture of the component, even with a tension below the yield stress of the material, unexpectedly. In this work, these aluminum alloys were analyzed and samples were modeled by the finite element method. Moreover, in the models were applied two different types of cracks, central and edge crack, a vertical force was applied to result in a tension 70% of the yield stress of the material analyzed. Through stress asymptotic distribution in the region near the crack tip were calculated the values of the stress intensity factors for each crack length, after the stress intensity factors characterized were compared graphically with the values of fracture toughness found in the available literature

Estudo das alterações das propriedades mecânicas em aço A-516 grau 70 soldado e submetido a tratamento térmico de alívio de tensões

Pressure vessels are equipments that require a great care because of their high cost and human life risk in case of fail, and its fabrication methods are different for each manufacturer. Normally, pressure vessels and its parts are fabricated by welding, which may change local properties of metals. The head of a pressure vessel is a very important structural component and it is fabricated by welding and mechanical conformation. Because its excellent mechanical properties, de steel A-516 Grade 70 is often used in manufacturing of large pressure vessels that are subjected to high pressure and temperature, but was verified that its mechanical resistance is decreased when submitted to a tension relief heat treatment. By experience it was defined that before mechanical conformation of the head of a large pressure vessel, the steel should be submitted to a stress relief heat treatment in order to facilitate the mechanical conformation, but there is no quantitative analysis to prove this method and study its possible risks. In the present work the steel A-516 Grade 70 demonstrated a decrease of its mechanical resistance when submitted to a stress relief heat treatment, but keeping above the minimum limit defined in the literature. By other side its ductility was substantially increased, being possible to deduce that the stress relief heat treatment before mechanical conformation is a viable e recommended technique, but with reservations. With the data acquired during the fabrication e preparation of the specimen and the result of the tests, it was possible to elaborate a welding procedure that provides the same results obtained in this present work

Efeito das dimensões dos corpos de prova na resistência à flexão de compósitos restauradores

The aim of this study was to evaluate the influence of specimen size, in comparison with the ISO Standard, on the three point flexural strength of resin composite restorative materials Filtek Supreme and Filtek Z-250. Forty specimens were fabricated for each material with the following length, width and thickness measurements (n = 10): 1) 20 × 2 × 2 mm (ISO 4049); 2) 10 × 2 × 1 mm; 3) 10 × 1 × 1 mm; 4) 8 × 0.8 × 0.8 mm. The composites were inserted in a single increment into two-piece metal device and light-polymerized. The specimens were dry stored at 37 ± 1 °C and protected from light for 7 days. After this period, flexural strength was measured by three-point flexure test using MTS 810 equipment, with a load cell of 10 kN at a speed of 0.5 mm/min. For the evaluated sizes, the results showed significant variability (p = 0.00) with values when compared with the ISO Standard (116.700 MPa), being statistically higher for the test specimens measuring 10 × 1 × 1 mm (142.530 MPa), similar for those of 10  ×  2  ×  1  mm (115.815 MPa) and lower for those of 8 × 0.8 × 0.8 mm (86.650 MPa). There was statistical equality (p = 0.08) for the studied composites (Filtek Supreme, 125.270 MPa; Filtek Z-250, 108.130 MPa). Specimens measuring 10 × 2 × 1 mm provided flexural strength values equivalent to those obtained in the sizes recommended by the ISO 4049 standard, with lower consumption of material, energy and time.