Scheduling Grid Applications with Software Requirements

The aim of task scheduling is to minimize the makespan of applications, exploiting the best possible way to use shared resources. Applications have requirements which call for customized environments for their execution. One way to provide such environments is to use virtualization on demand. This paper presents two schedulers based on integer linear programming which schedule virtual machines (VMs) in grid resources and tasks on these VMs. The schedulers differ from previous work by the joint scheduling of tasks and VMs and by considering the impact of the available bandwidth on the quality of the schedule. Experiments show the efficacy of the schedulers in scenarios with different network configurations.

Polymeric electronic gas sensor for determining alcohol content in automotive fuels

In this paper we describe the electrosynthesis of poly[(2-bromo-5-hexyloxy- 1,4-phenylenevinylene)-co-(1,4-phenylenevinylene)] (BHPPV-co-PPV), a novel conducting copolymer, and its application as active layer of a chemiresistive gas sensor suitable for quantification of ethanol present in ethanol-gasoline mixtures normally present in the fuel tanks of flex-fuel vehicles. This information is crucial for the smooth operation of the engine since it permits optimal air:fuel ratio regulation. The sensor consists of an interdigitated electrode coated with a thin polymer film doped with dodecylbenzenesulfonic acid. On exposure to fuel vapours at room temperature, the device presents a linear correlation between its electrical conductance and the ethanol concentration in the fuel. (C) 2008 Elsevier B.V. All rights reserved.

The technical skills of information technology workers in Argentina

Includes bibliography

Creative Commons: a convergence model between the ideal of commons and the possibilities of creation in contemporary times, opposed to copyright impediments

The contemporary individual finds on the Internet and especially on the Web facilitating conditions to build a basic infrastructure based on the concept of commons. He also finds favorable conditions which allow him to collaborate and share resources for the creation, use, reuse, access and dissemination of information. However, he also faces obstacles such as Copyright (Law 9610/98 in Brazil). An alternative is Creative Commons which not only allows the elaboration, use and dissemination of information under legal conditions but also function as a facilitator for the development of informational commons. This paper deals with this scenario.

What Business Reference Librarians Need to Know about Intellectual Property: Presentations sponsored by the Patent and Trademark Depository Library Association (PTDLA) at the American Library Association Annual Conference, New Orleans, June 25, 2006

Presentations sponsored by the Patent and Trademark Depository Library Association (PTDLA) at the American Library Association Annual Conference, New Orleans, June 25, 2006 Speaker #1: Nan Myers Associate Professor; Government Documents, Patents and Trademarks Librarian Wichita State University, Wichita, KS Title: Intellectual Property Roundup: Copyright, Trademarks, Trade Secrets, and Patents Abstract: This presentation provides a capsule overview of the distinctive coverage of the four types of intellectual property – What they are, why they are important, how to get them, what they cost, how long they last. Emphasis will be on what questions patrons ask most, along with the answers! Includes coverage of the mission of Patent & Trademark Depository Libraries (PTDLs) and other sources of business information outside of libraries, such as Small Business Development Centers. Speaker #2: Jan Comfort Government Information Reference Librarian Clemson University, Clemson, SC Title: Patents as a Source of Competitive Intelligence Information Abstract: Large corporations often have R&D departments, or large numbers of staff whose jobs are to monitor the activities of their competitors. This presentation will review strategies that small business owners can employ to do their own competitive intelligence analysis. The focus will be on features of the patent database that is available free of charge on the USPTO website, as well as commercial databases available at many public and academic libraries across the country. Speaker #3: Virginia Baldwin Professor; Engineering Librarian University of Nebraska-Lincoln, Lincoln, NE Title: Mining Online Patent Data for Business Information Abstract: The United States Patent and Trademark Office (USPTO) website and websites of international databases contains information about granted patents and patent applications and the technologies they represent. Statistical information about patents, their technologies, geographical information, and patenting entities are compiled and available as reports on the USPTO website. Other valuable information from these websites can be obtained using data mining techniques. This presentation will provide the keys to opening these resources and obtaining valuable data. Speaker #4: Donna Hopkins Engineering Librarian Renssalaer Polytechnic Institute, Troy, NY Title: Searching the USPTO Trademark Database for Wordmarks and Logos Abstract: This presentation provides an overview of wordmark searching in www.uspto.gov, followed by a review of the techniques of searching for non-word US trademarks using codes from the Design Search Code Manual. These codes are used in an electronic search, either on the uspto website or on CASSIS DVDs. The search is sometimes supplemented by consulting the Official Gazette. A specific example of using a section of the codes for searching is included. Similar searches on the Madrid Express database of WIPO, using the Vienna Classification, will also be briefly described.

Revisiting the Security of the ALRED Design and Two of Its Variants: Marvin and LetterSoup

The ALRED construction is a lightweight strategy for constructing message authentication algorithms from an underlying iterated block cipher. Even though this construction's original analyses show that it is secure against some attacks, the absence of formal security proofs in a strong security model still brings uncertainty on its robustness. In this paper, aiming to give a better understanding of the security level provided by different authentication algorithms based on this design strategy, we formally analyze two ALRED variants-the MARVIN message authentication code and the LETTERSOUP authenticated-encryption scheme,-bounding their security as a function of the attacker's resources and of the underlying cipher's characteristics.

Toward the Optimization of an e-Tongue System Using Information Visualization: A Case Study with Perylene Tetracarboxylic Derivative Films in the Sensing Units

The wide variety of molecular architectures used in sensors and biosensors and the large amount of data generated with some principles of detection have motivated the use of computational methods, such as information visualization techniques, not only to handle the data but also to optimize sensing performance. In this study, we combine projection techniques with micro-Raman scattering and atomic force microscopy (AFM) to address critical issues related to practical applications of electronic tongues (e-tongues) based on impedance spectroscopy. Experimentally, we used sensing units made with thin films of a perylene derivative (AzoPTCD acronym), coating Pt interdigitated electrodes, to detect CuCl(2) (Cu(2+)), methylene blue (MB), and saccharose in aqueous solutions, which were selected due to their distinct molecular sizes and ionic character in solution. The AzoPTCD films were deposited from monolayers to 120 nm via Langmuir-Blodgett (LB) and physical vapor deposition (PVD) techniques. Because the main aspects investigated were how the interdigitated electrodes are coated by thin films (architecture on e-tongue) and the film thickness, we decided to employ the same material for all sensing units. The capacitance data were projected into a 2D plot using the force scheme method, from which we could infer that at low analyte concentrations the electrical response of the units was determined by the film thickness. Concentrations at 10 mu M or higher could be distinguished with thinner films tens of nanometers at most-which could withstand the impedance measurements, and without causing significant changes in the Raman signal for the AzoPTCD film-forming molecules. The sensitivity to the analytes appears to be related to adsorption on the film surface, as inferred from Raman spectroscopy data using MB as analyte and from the multidimensional projections. The analysis of the results presented may serve as a new route to select materials and molecular architectures for novel sensors and biosensors, in addition to suggesting ways to unravel the mechanisms behind the high sensitivity obtained in various sensors.

Using Machine Learning Classifiers to Assist Healthcare-Related Decisions: Classification of Electronic Patient Records

Surveillance Levels (SLs) are categories for medical patients (used in Brazil) that represent different types of medical recommendations. SLs are defined according to risk factors and the medical and developmental history of patients. Each SL is associated with specific educational and clinical measures. The objective of the present paper was to verify computer-aided, automatic assignment of SLs. The present paper proposes a computer-aided approach for automatic recommendation of SLs. The approach is based on the classification of information from patient electronic records. For this purpose, a software architecture composed of three layers was developed. The architecture is formed by a classification layer that includes a linguistic module and machine learning classification modules. The classification layer allows for the use of different classification methods, including the use of preprocessed, normalized language data drawn from the linguistic module. We report the verification and validation of the software architecture in a Brazilian pediatric healthcare institution. The results indicate that selection of attributes can have a great effect on the performance of the system. Nonetheless, our automatic recommendation of surveillance level can still benefit from improvements in processing procedures when the linguistic module is applied prior to classification. Results from our efforts can be applied to different types of medical systems. The results of systems supported by the framework presented in this paper may be used by healthcare and governmental institutions to improve healthcare services in terms of establishing preventive measures and alerting authorities about the possibility of an epidemic.

Electronic Government Interoperability: Identifying the Barriers for Frameworks Adoption

Interoperability is a crucial issue for electronic government due to the need of agencies' information systems to be totally integrated and able to exchange data in a seamless way. A way to achieve it is by establishing a government interoperability framework (GIF). However, this is a difficult task to be carried out due not only to technological issues but also to other aspects. This research is expected to contribute to the identification of the barriers to the adoption of interoperability standards for electronic government. The article presents the preliminary findings from a case study of the Brazilian Government framework (e-PING), based on the analyses of documents and face-to-face interviews. It points out some aspects that may influence the establishment of these standards, becoming barriers to their adoption.

Theoretical and experimental studies on the electronic, optical, and structural properties of poly-pyrrole-2-carboxylic acid films

A theoretical approach is used here to explain experimental results obtained from the electrosynthesis of polypyrrole-2-carboxylic acid (PPY-2-COOH) films in nonaqueous medium. An analysis of the Fukui function (reactivity index) indicates that the monomer (pyrrole-2-carboxylic acid, PY-2-COOH), and dimers and trimers are oxidized in the C4 or C5 positions of the heterocyclic ring of the PY-2-COOH structure. After calculating the heat of formation using semiempirical Austin Model 1 post-Hartree-Fock parameterization for dimer species, both C4 and C5 positions adjacent to the aromatic rings of PPY-2-COOH were considered the most susceptible ones to oxidative coupling reactions. The ZINDO-S/CI semiempirical method was used to simulate the electronic transitions typically seen in the UV-VIS-NIR range in monomer and oligomers with different conjugation lengths. The use of an electrochemical quartz crystal microbalance provides sufficient information to propose a polymerization mechanism of PY-2-COOH based on molecular modeling and experimental results.

On the Role of Copyright Protection in the Information Society

In January 2012, Poland witnessed massive protests, both in the streets and on the Internet, opposing ratification of the Anti-Counterfeiting Trade Agreement, which triggered a wave of strong anti-ACTA movements across Europe. In Poland, these protests had further far-reaching consequences, as they not only changed the initial position of the government on the controversial treaty but also actually started a public debate on the role of copyright law in the information society. Moreover, as a result of these events the Polish Ministry for Administration and Digitisation launched a round table, gathering various stakeholders to negotiate a potential compromise with regard to copyright law that would satisfy conflicting interests of various actors. This contribution will focus on a description of this massive resentment towards ACTA and a discussion of its potential reasons. Furthermore, the mechanisms that led to the extraordinary influence of the anti-ACTA movement on the governmental decisions in Poland will be analysed through the application of models and theories stemming from the social sciences. The importance of procedural justice in the copyright legislation process, especially its influence on the image of copyright law and obedience of its norms, will also be emphasised.

Assessing the impact of electronic health record technology adoption on hospital labor efficiency

Information technology (IT) in the hospital organization is fast becoming a key asset, particularly in light of recent reform legislation in the United States calling for expanding the role of IT in our health care system. Future payment reductions to hospitals included in current health reform are based on expected improvements in hospital operating efficiency. Since over half of hospital expenses are for labor, improved efficiency in use of labor resources can be critical in meeting this challenge. Policy makers have touted the value of IT investments to improve efficiency in response to payment reductions. ^ This study was the first to directly examine the relationship between electronic health record (EHR) technology and staffing efficiency in hospitals. As the hospital has a myriad of outputs for inpatient and outpatient care, efficiency was measured using an industry standard performance metric – full time equivalent employees per adjusted occupied bed (FTE/AOB). Three hypotheses were tested in this study.^ To operationalize EHR technology adoption, we developed three constructs to model adoption, each of which was tested by separate hypotheses. The first hypothesis that a larger number of EHR applications used by a hospital would be associated with greater staffing efficiency (or lower values of FTE/AOB) was not accepted. Association between staffing efficiency and specific EHR applications was the second hypothesis tested and accepted with some applications showing significant impacts on observed values for FTE/AOB. Finally, the hypothesis that the longer an EHR application was used in a hospital would be associated with greater labor efficiency was not accepted as the model showed few statistically significant relationships to FTE/AOB performance. Generally, there does not appear a strong relationship between EHR usage and improved labor efficiency in hospitals.^ While returns on investment from EHR usage may not come from labor efficiencies, they may be better sought using measures of quality, contribution to an efficient and effective local health care system, and improved customer satisfaction through greater patient throughput.^