Remoção de carbonatos para otimizar a biolixiviação de rejeito calcopirítico empregando consórcio de microrganismos

The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.

Remoção de carbonatos para otimizar a biolixiviação de rejeito calcopirítico empregando consórcio de microrganismos

The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.

A model for the modular evolution of rna addressing open questions on the origin of life

A main unsolved problem in the RNA world scenario for the origin of life is how a template-dependent RNA polymerase ribozyme emerged from short RNA oligomers generated by random polymerization of ribonucleotides (Joyce and Orgel 2006). Current estimates establish a minimum size about 165 nt long for such a ribozyme (Johnston et al. 2001), a length three to four times that of the longest RNA oligomers obtained by random polymerization on clay mineral surfaces (Huang and Ferris 2003, 2006). To overcome this gap, we have developed a stepwise model of ligation-based, modular evolution of RNA (Briones et al. 2009) whose main conceptual steps are summarized in Figure 1. This scenario has two main advantages with respect to previous hypotheses put forward for the origin of the RNA world: i) short RNA....

Integrated System Technologies for Modular Trapped Ion Quantum Information Processing

Although trapped ion technology is well-suited for quantum information science, scalability of the system remains one of the main challenges. One of the challenges associated with scaling the ion trap quantum computer is the ability to individually manipulate the increasing number of qubits. Using micro-mirrors fabricated with micro-electromechanical systems (MEMS) technology, laser beams are focused on individual ions in a linear chain and steer the focal point in two dimensions. Multiple single qubit gates are demonstrated on trapped 171Yb+ qubits and the gate performance is characterized using quantum state tomography. The system features negligible crosstalk to neighboring ions (< 3e-4), and switching speeds comparable to typical single qubit gate times (< 2 us). In a separate experiment, photons scattered from the 171Yb+ ion are coupled into an optical fiber with 63% efficiency using a high numerical aperture lens (0.6 NA). The coupled photons are directed to superconducting nanowire single photon detectors (SNSPD), which provide a higher detector efficiency (69%) compared to traditional photomultiplier tubes (35%). The total system photon collection efficiency is increased from 2.2% to 3.4%, which allows for fast state detection of the qubit. For a detection beam intensity of 11 mW/cm2, the average detection time is 23.7 us with 99.885(7)% detection fidelity. The technologies demonstrated in this thesis can be integrated to form a single quantum register with all of the necessary resources to perform local gates as well as high fidelity readout and provide a photon link to other systems.

Prudent female allocation by modular hermaphrodites: female investment is promoted by the opportunity to outcross in cyclostome bryozoans

Many sessile, suspension-feeding marine invertebrates mate by spermcasting: aquatic sperm are spawned and gathered by conspecific individuals to fertilize eggs that are generally retained during development. In two phylogenetically distant examples, a cheilostome bryozoan and an aplousobranch ascidian, the receipt of allosperm has previously been shown to alter sex allocation by triggering female investment in eggs and brooding. Here we report experiments demonstrating that two species of cyclostome bryozoan also show restrained female investment in the absence of mating opportunity. In Tubulipora plumosa, the production of female zooids and progeny is much reduced in reproductive isolation. In Filicrisia geniculata, development of distinctive female zooids (gonozooids) begins but halts in the absence of mating opportunity, and no completed gonozooids or progeny result. Reduced female investment in the absence of a mate thus occurs in at least two orders of Bryozoa, but significant differences in detail exist and the evolutionary history within the phylum of the mechanism(s) by which female investment is initiated might be complex. The broadening taxonomic spectrum of examples where female investment appears restrained until allosperm becomes available may signify a general adaptive strategy among outcrossing modular animals, analogous to similarly adaptive sex allocation typical of many flowering plants.

Prudent female allocation by modular hermaphrodites: female investment is promoted by the opportunity to outcross in cyclostome bryozoans

Many sessile, suspension-feeding marine invertebrates mate by spermcasting: aquatic sperm are spawned and gathered by conspecific individuals to fertilize eggs that are generally retained during development. In two phylogenetically distant examples, a cheilostome bryozoan and an aplousobranch ascidian, the receipt of allosperm has previously been shown to alter sex allocation by triggering female investment in eggs and brooding. Here we report experiments demonstrating that two species of cyclostome bryozoan also show restrained female investment in the absence of mating opportunity. In Tubulipora plumosa, the production of female zooids and progeny is much reduced in reproductive isolation. In Filicrisia geniculata, development of distinctive female zooids (gonozooids) begins but halts in the absence of mating opportunity, and no completed gonozooids or progeny result. Reduced female investment in the absence of a mate thus occurs in at least two orders of Bryozoa, but significant differences in detail exist and the evolutionary history within the phylum of the mechanism(s) by which female investment is initiated might be complex. The broadening taxonomic spectrum of examples where female investment appears restrained until allosperm becomes available may signify a general adaptive strategy among outcrossing modular animals, analogous to similarly adaptive sex allocation typical of many flowering plants.

Modular approach to select bacteriophages targeting Pseudomonas aeruginosa for their application to children suffering with cystic fibrosis

This review discusses the potential application of bacterial viruses (phage therapy) towards the eradication of antibiotic resistant Pseudomonas aeruginosa in children with cystic fibrosis (CF). In this regard, several potential relationships between bacteria and their bacteriophages are considered. The most important aspect that must be addressed with respect to phage therapy of bacterial infections in the lungs of CF patients is in ensuring the continuity of treatment in light of the continual occurrence of resistant bacteria. This depends on the ability to rapidly select phages exhibiting an enhanced spectrum of lytic activity among several well-studied phage groups of proven safety. We propose a modular based approach, utilizing both mono-species and hetero-species phage mixtures. With an approach involving the visual recognition of characteristics exhibited by phages of well studied phage groups on lawns of the standard P. aeruginosa PAO1 strain, the simple and rapid enhancement of the lytic spectrum of cocktails is permitted, allowing the development of tailored preparations for patients capable of circumventing problems associated with phage resistant bacterial mutants.

Mathematical methods for the configuration of transportation systems with a focus on continuous and modular matrix conveyors

The lack of flexibility in logistic systems currently on the market leads to the development of new innovative transportation systems. In order to find the optimal configuration of such a system depending on the current goal functions, for example minimization of transport times and maximization of the throughput, various mathematical methods of multi-criteria optimization are applicable. In this work, the concept of a complex transportation system is presented. Furthermore, the question of finding the optimal configuration of such a system through mathematical methods of optimization is considered.

Modular catalyst: from the tiling of a water plane to the design of a floating structure

La tesi nasce dalla volontà di agire sull’area della Darsena di Ravenna, strategica in quanto via d’acqua navigabile che congiunge il mare con il centro città ma dal potenziale ancora poco sfruttato. Il progetto è studiato per essere inserito come catalizzatore urbano, creando spazi di interazione attraverso elementi modulari galleggianti e riconfigurabili per adattarsi a programmi d’uso flessibili; tali elementi si aggregano formando un sistema che ristruttura lo spazio dell’attuale banchina, cambiandone la percezione da barriera a waterfront urbano. La necessità di ottenere una struttura con capacità di crescita e flessibilità programmatica sfocia in un approccio modulare seguendo il principio massima variazione/minimo numero di elementi i cui principi aggregativi si basano sulla tassellazione “Cairo”. Vengono studiate le possibilità di incorporare variazione ed eterogeneità all’interno del sistema senza comprometterne la modularità fino ad integrare percorsi multilivello. La definizione delle morfologie delle parti che compongono i moduli si basano sullo studio dei principi di galleggiamento, stabilità e yacht design: a partire dalla forma dello scafo adatta ai principi di tiling definiti in precedenza, tutte le parti che compongono le varie tipologie di modulo sono progettate cercando continuità e integrazione tettonica (geometrica, strutturale, funzionale e percettiva). Vengono proposte soluzioni integrate sia per le problematiche tipiche delle strutture galleggianti sia per l’inserimento di attività all’interno della soluzione architettonica. Vengono prototipati di una serie di moduli, scelti in modo da dimostrare i principi di ricombinazione, continuità, modularità e tiling.

Relações de cooperação em consórcios públicos de regiões metropolitanas: análises do CONDIAM/PB e consórcio grande Recife

With the disorganized decentralization occurred in Brazil after the 1988 Constitution, municipalities have risen to the level of federal entities. This phenomenon became known as "municipalism" also brought some negative effects such as low capacity financial, economic and political of these entities. In the face of this reality , the municipalities sought in models of collaborative features to address public policy issues ultrarregionais, one of these models are the Public Consortia. Characterized as the organization of all federal entities that aim to solve public policy implementation alone that they could not, or spend great resources for such. This reality of the municipalities have an aggravating factor when looking at the situation in Metropolitan Regions (MRs). This is because the RMs has a historical process of formation that does not encourage cooperation, since that were created top-down during the military regime. Furthermore, the metropolitan municipalities have significant power asymmetries, localist vision, rigidity earmarked revenues, different scenarios conurbation, difficulty standardization of concepts and others that contribute to the vision of low cooperation of these metropolitan areas. Thus, the problem of this work is in the presence of collaborative arrangements, such as the Public Consortia in metropolitan areas, which are seen as areas of low cooperation. To elucidate this research was used for analysis the cases of CONDIAM/PB and Consórcio Grande Recife/PE, because they are apparently antagonistic, but with some points of similarity. The cases has as foundation the Theory of Common Resources, which provides the possibility of collective action through the initiative of individuals. This theory has as its methodology for analyzing the picture IAD Framework, which proposes its analysis based on three axes: external variables, the arena of action and results. The nature of the method of this research was classified as exploratory and descriptive. For the stage of date analysis, was used the method of document analysis and content, Further than of separation of the cases according to theur especificities. At the end of the study, noted that the CONDIAM/PB was a strategy of municipal government of Joao Pessoa to attract funds from the Federal Government for the purpose of to build a landfill, and over the years the ideology of cooperation was left aside, the prevailing view localist municipalities. In the case of Consórcio Grande Recife/PE, members act with some degree of cooperation, especially the collaborative aspect of the region, however, still prevails with greater strength the power of the state of Pernambuco in the decisions and paths of the consortium. Thus, was conclude that the Public Consortia analyzed are an experience of collaborative arrangement, from the initiative of members, as the theory of common resources says, but has not actually signed as a practice of collective action to overcome the dilemmas faced by metropolitan areas

Una aproximación topológica al diseño modular en ingeniería de software

Dada la gran importancia que ha tomado el paradigma orientado a objetos en la ingeniería de software y al papel central que juega la reusabilidad dentro de éste, se hacen necesarias la precisión y formalización de conceptos claves como cohesión, acoplamiento y modularidad. En este trabajo se propone una formalización matemática de esos conceptos claves basada en la topología algebraica y que nos conduce a unos criterios formales de diseño modular que facilitan la medición de los conceptos.

Diseño de una herramienta modular que facilite la implementación del Banco de Proyectos de la Fundación Red de Apoyo Social de Antioquia – RASA, ubicado en la ciudad de Medellín, entre el periodo 2014-2 y 2015-1

Los usuarios reales y potenciales del sistemas de salud en Colombia, encuentran en el camino de acceso a los servicios múltiples barreras, debido a las diferentes carencias que éste sistema presenta. Para apoyar las necesidades del usuario en éste tema de acceso, se constituyó en el año 2006 la Fundación RASA, quien ofrece de manera gratuita, a la comunidad en general, mecanismos de exigibilidad, acceso y protección de sus derechos en temas de salud. Este trabajo de grado, pretende dar un valor agregado diseñando una herramienta modular que facilite la implementación del banco de proyectos, con el fin de mejorar sus procesos y sea referencia para otras entidades dedicadas a velar por el bienestar de los individuos, en virtud de su objeto social orientado a la protección de derechos en temas de salud, además se realiza con el fin de Optar por el Título de Especialista en Alta Gerencia de la Universidad de Medellín. Con el fin de entender las necesidades de La Fundación RASA, será primordial conocer y tener un manejo adecuado de la teoría de la organización; teniendo clara su vertiente descriptiva que sugiere lo que se debe hacer para mejorar varios aspectos de la empresa, en éste caso la necesidad de diseñar un Banco de Proyectos. El trabajo se ha estructurado de la siguiente manera: Referente Teórico, Contextualización De La Fundación Rasa, Diseño De Una Herramienta Modular (Introducción, Objetivos, Recursos, Metodología y procedimientos, Evaluación y Monitoreo, Responsable de proceso, Presupuesto Estructural), Conclusiones y Recomendaciones.

Is Experts' Knowledge Modular?

This paper explores, both with empirical data and with computer simulations, the extent to which modularity characterises experts' knowledge. We discuss a replication of Chase and Simon's (1973) classic method of identifying 'chunks', i.e., perceptual patterns stored in memory and used as units. This method uses data about the placement of pairs of items in a memory task and consists of comparing latencies between these items and the number and type of relations they share. We then compare the human data with simulations carried out with CHREST, a computer model of perception and memory. We show that the model, based upon the acquisition of a large number of chunks, accounts for the human data well. This is taken as evidence that human knowledge is organised in a modular fashion.

Tile-Based Two-Dimensional Phase Unwrapping for Digital Holography Using a Modular Framework

A variety of physical and biomedical imaging techniques, such as digital holography, interferometric synthetic aperture radar (InSAR), or magnetic resonance imaging (MRI) enable measurement of the phase of a physical quantity additionally to its amplitude. However, the phase can commonly only be measured modulo 2π, as a so called wrapped phase map. Phase unwrapping is the process of obtaining the underlying physical phase map from the wrapped phase. Tile-based phase unwrapping algorithms operate by first tessellating the phase map, then unwrapping individual tiles, and finally merging them to a continuous phase map. They can be implemented computationally efficiently and are robust to noise. However, they are prone to failure in the presence of phase residues or erroneous unwraps of single tiles. We tried to overcome these shortcomings by creating novel tile unwrapping and merging algorithms as well as creating a framework that allows to combine them in modular fashion. To increase the robustness of the tile unwrapping step, we implemented a model-based algorithm that makes efficient use of linear algebra to unwrap individual tiles. Furthermore, we adapted an established pixel-based unwrapping algorithm to create a quality guided tile merger. These original algorithms as well as previously existing ones were implemented in a modular phase unwrapping C++ framework. By examining different combinations of unwrapping and merging algorithms we compared our method to existing approaches. We could show that the appropriate choice of unwrapping and merging algorithms can significantly improve the unwrapped result in the presence of phase residues and noise. Beyond that, our modular framework allows for efficient design and test of new tile-based phase unwrapping algorithms. The software developed in this study is freely available.