Development of a high-throughput monitoring technique of bacteria photodynamic inactivation

Summary form only given. Bacterial infections and the fight against them have been one of the major concerns of mankind since the dawn of time. During the `golden years' of antibiotic discovery, during the 1940-90s, it was thought that the war against infectious diseases had been won. However currently, due to the drug resistance increase, associated with the inefficiency of discovering new antibiotic classes, infectious diseases are again a major public health concern. A potential alternative to antibiotic treatments may be the antimicrobial photodynamic inactivation (PDI) therapy. To date no indication of antimicrobial PDI resistance development has been reported. However the PDI protocol depends on the bacteria species [1], and in some cases on the bacteria strains, for instance Staphylococcus aureus [2]. Therefore the development of PDI monitoring techniques for diverse bacteria strains is critical in pursuing further understanding of such promising alternative therapy. The present works aims to evaluate Fourier-Transformed-Infra-Red (FT-IR) spectroscopy to monitor the PDI of two model bacteria, a gram-negative (Escherichia coli) and a gram-positive (S. aureus) bacteria. For that a high-throughput FTIR spectroscopic method was implemented as generally described in Scholz et al. [3], using short incubation periods and microliter quantities of the incubation mixture containing the bacteria and the PDI-drug model the known bactericidal tetracationic porphyrin 5,10,15,20-tetrakis (4-N, N, Ntrimethylammoniumphenyl)-porphyrin p-tosylate (TTAP4+). In both bacteria models it was possible to detect, by FTIR-spectroscopy, the drugs effect on the cellular composition either directly on the spectra or on score plots of principal component analysis. Furthermore the technique enabled to infer the effect of PDI on the major cellular biomolecules and metabolic status, for example the turn-over metabolism. In summary bacteria PDI was monitored in an economic, rapid (in minutes- , high-throughput (using microplates with 96 wells) and highly sensitive mode resourcing to FTIR spectroscopy, which could serve has a technological basis for the evaluation of antimicrobial PDI therapies efficiency.

Monitoring the ex-vivo expansion of human mesenchymal stem/stromal cells in xeno-free microcarrier-based reactor systems by MIR spectroscopy

Human mesenchymal stem/stromal cells (MSCs) have received considerable attention in the field of cell-based therapies due to their high differentiation potential and ability to modulate immune responses. However, since these cells can only be isolated in very low quantities, successful realization of these therapies requires MSCs ex-vivo expansion to achieve relevant cell doses. The metabolic activity is one of the parameters often monitored during MSCs cultivation by using expensive multi-analytical methods, some of them time-consuming. The present work evaluates the use of mid-infrared (MIR) spectroscopy, through rapid and economic high-throughput analyses associated to multivariate data analysis, to monitor three different MSCs cultivation runs conducted in spinner flasks, under xeno-free culture conditions, which differ in the type of microcarriers used and the culture feeding strategy applied. After evaluating diverse spectral preprocessing techniques, the optimized partial least square (PLS) regression models based on the MIR spectra to estimate the glucose, lactate and ammonia concentrations yielded high coefficients of determination (R2 ≥ 0.98, ≥0.98, and ≥0.94, respectively) and low prediction errors (RMSECV ≤ 4.7%, ≤4.4% and ≤5.7%, respectively). Besides PLS models valid for specific expansion protocols, a robust model simultaneously valid for the three processes was also built for predicting glucose, lactate and ammonia, yielding a R2 of 0.95, 0.97 and 0.86, and a RMSECV of 0.33, 0.57, and 0.09 mM, respectively. Therefore, MIR spectroscopy combined with multivariate data analysis represents a promising tool for both optimization and control of MSCs expansion processes.

Comparative analysis of near and mid-infrared spectroscopy to monitor recombinant cyprosin production

Infrared spectroscopy, either in the near and mid (NIR/MIR) region of the spectra, has gained great acceptance in the industry for bioprocess monitoring according to Process Analytical Technology, due to its rapid, economic, high sensitivity mode of application and versatility. Due to the relevance of cyprosin (mostly for dairy industry), and as NIR and MIR spectroscopy presents specific characteristics that ultimately may complement each other, in the present work these techniques were compared to monitor and characterize by in situ and by at-line high-throughput analysis, respectively, recombinant cyprosin production by Saccharomyces cerevisiae. Partial least-square regression models, relating NIR and MIR-spectral features with biomass, cyprosin activity, specific activity, glucose, galactose, ethanol and acetate concentration were developed, all presenting, in general, high regression coefficients and low prediction errors. In the case of biomass and glucose slight better models were achieved by in situ NIR spectroscopic analysis, while for cyprosin activity and specific activity slight better models were achieved by at-line MIR spectroscopic analysis. Therefore both techniques enabled to monitor the highly dynamic cyprosin production bioprocess, promoting by this way more efficient platforms for the bioprocess optimization and control.

Análise de Integridade Estrutural de uma Flare Industrial

Para garantir que um equipamento opere com segurança e fiabilidade durante o seu ciclo de vida, desde a sua instalação ao desmantelamento, devem ser realizadas inspeções e/ou monitorizações que, dependendo dos dados recolhidos, podem implicar avaliações Fitness- For-Service (FFS) que definirão a necessidade de reparação ou alteração do equipamento ou das condições processuais. A combinação de inspeção ou monitorização com os melhores procedimentos e técnicas de avaliação atuais fazem sobressair insuficiências dos procedimentos mais antigos. Usando métodos mais avançados de avaliação, validados e suportados através de uma vasta experiência de campo, pode-se agora avaliar defeitos nos ativos (equipamentos) e determinar a adequação ao serviço com uma análise FFS. As análises FFS tornaram-se cada vez mais aceites em toda a indústria ao longo dos últimos anos. A norma API 579 - 1/ASME FFS-1: 2007 fornece diretrizes para avaliar os tipos de danos que afetam os equipamentos processuais e a norma API RP 571: 2011 descreve os mecanismos de degradação que afetam os equipamentos nas petroquímicas e refinarias, que incluem os danos por corrosão, desalinhamentos, deformações plásticas, laminações, fissuras, entre outros. Este trabalho consiste na análise de Integridade Estrutural de uma Flare Industrial que surgiu da necessidade real de análise do equipamento no âmbito da atividade profissional do candidato. O estudo realizado a nível profissional é de grande abrangência, incluindo a inspeção do equipamento, identificação da falha ou dano, recolha e registo de dados, definição de estratégia de atuação e seleção de técnicas de avaliação da condição para posterior alteração, reparação ou desmantelamento. Na presente dissertação de mestrado em Engenharia Mecânica, Ramo Construções Mecânicas, pretende-se efetuar o estudo aprofundado de uma das etapas de projeto, nomeadamente estudar a causa, avaliar a falha e implicações estruturais ou processuais devido à degradação interior do riser de uma flare, com base numa análise FFS, assumindo a operabilidade em segurança e garantindo resolutas condições de funcionamento. A presente análise FFS tem como finalidade validar ou não a integridade atual (avaliação técnica quantitativa) de modo a conhecer se o item em questão é seguro e confiável para continuar a operar em condições específicas durante um período de tempo determinado, tendo em consideração as condições verificadas no ato de inspeção e especificações de projeto, segundo os itens de verificação de segurança estabelecidos na norma EN 1990:2002/A1:2005/AC:2010 e com base na norma API 579-1/ASME FFS-1: 2007. No âmbito do presente trabalho foram realizadas as seguintes tarefas: - Identificar e analisar os mecanismos de degradação com base na norma API RP 571: 2011, face às condições processuais e geométricas que o equipamento em análise está sujeito de modo a perceber a evolução da degradação estrutural e quais as implicações na sua longevidade. - Avaliar e propor soluções de reparação e ou alterações processuais e ou geométricas do equipamento em análise de modo a permitir a continuidade em funcionamento sem afetar as condições de segurança e por conseguinte minimizar ou evitar o elevado custo económico associado a um novo equipamento e tempo de paragem processual. - Assumir limites estruturais face às condições processuais e ações externas ou adjacentes. - Garantir a segurança e qualidade da vida humana ou meio que o rodeia, do equipamento, das instalações, das infraestruturas envolventes e evitar o colapso económico, quer por motivos processuais, quer indeminizações ou agravamento do prémio do seguro. Verificou-se que os resultados serão a base para as alterações inerentes, tais como reforço estrutural, alteração da geometria do defletor, ajuste no tensionamento dos cabos e controlo da espessura mínima, de modo a alargar o período de vida útil da flare com segurança.

Protocolo de fisioterapia, com auxílio de biofeedback electromiográfico, em utentes com disfunções do ombro: efeitos na dor, funcionalidade e estabilidade dinâmica

RESUMO: Introdução: A dor e disfunções do movimento no complexo articular do ombro (CAO) são comuns e debilitantes. O uso de exercícios segundo os pressupostos de estabilidade dinâmica (ED), com auxílio de Biofeedback electromiográfico (BEMG) tem vindo a ser referido, como uma forma de aumentar a efectividade da intervenção nas disfunções do complexo articular do ombro (DCAO)Objectivo Principal: Estudar os efeitos de um protocolo de intervenção, com BEMG, cujas finalidades foram abolir a dor, aumentar a funcionalidade e a ED da omoplata, em utentes com DCAO. Objectivos secundários: Comparar os subgrupos e quanto às características, resultados, tempos de intervenção total e até atingir critérios de alta; Comparar os resultados nos momentos inicial e final. Métodos: Foi realizado um coorte clínico, longitudinal, retrospectivo, observacional, analítico. A amostra foi constituída por 82 sujeitos, divididos em dois subgrupos (n=53 SCSA e n=29 IGU). Os instrumentos de medida utilizados foram a EVA, o DASH, o SPADI e o BEMG. Foi seguido o protocolo de ED proposto por Santos e Matias (2007), de acordo com as 3 fases de intervenção por eles descritas, realizando uma sessão semanal, monitorizando exercícios que seguem estes princípios, com BEMG. Foram avaliadas as variáveis dor, postura, padrão de recrutamento, controlo motor, posição inicial da omoplata (PIO), amplitudes articulares (AA’s), força muscular (FM) e postura. Para analisar os dados, recorreu-se a estatística descritiva e inferencial. Resultados: A intervenção foi efectiva na abolição da dor no momento (0,43 para 0,00/10EVA no subgrupo SCSA e 0,66 para 0,00/10EVA no subgrupo IGU) na pior dor (5,47/10EVA para 0,06/10EVA no subgrupo SCSA e 5,28/10 para 0,14/10 no subgrupo IGU), no aumento da função (28,57 para 0,66/100DASH e 39,00 para 0,63/100SAPDI no subgrupo SCSA e 25,80 para 0,38/100DASH e 28,19 para 0,39/100 no subgrupo IGU) e no aumento da ED da omoplata com normalização do padrão de recrutamento, controlo motor, PIO dentro do espectro de normalidade e boa capacidade de controlar a sua posição, ao longo do movimento do membro superior (MS). A intervenção proporcionou, ainda a normalização das AA’s, FM e autocorrecção postural. O tempo médio de intervenção foi de 6,45semanas no subgrupo SCSA e 5,83sem no subgrupo IGU. Estes resultados são semelhantes comparativamente a estudos que utilizaram uma intervenção baseada nos mesmos princípios (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusão: O protocolo de intervenção aplicado, com uso de exercícios baseados nos princípios da ED e uso de BEMG, permitiu o alcance dos objectivos, junto de utentes com DCAO (SCSA e IGU). Verificou-se que, independentemente da condição, os resultados foram idênticos em ambos subgrupos, não apresentando diferenças significativas entre as variáveis de medida final, o tempo total de intervenção e os tempos até atingir os critérios de alta, expecto para a Dor, sendo este superior no subgrupo SCSA.---------------------------------------- ABSTRACT:Introduction: Movement disorders and pain in the shoulder joint complex (SJC) are common and debilitating. The use of exercises under the premises of dynamic stability (DS), with the aid of electromyographic biofeedback (EMGBF) has been mentioned as a way to increase the effectiveness of the intervention in disorders of the shoulder joint complex (DSJC) Main Objective: To evaluate the results of an intervention protocol, with EMGBF whose aims were to abolish the pain, increase functionality and DS of the scapula in patients with DSJC. Objectives: To compare the subgroups and the characteristics, outcomes, and total intervention times to reach discharge criteria; to compare the results at the beginning and at the end. Methods: We conducted a clinical cohort, longitudinal, retrospective, observational analysis. The sample consisted of 82 subjects, divided into two subgroups (n = 53 shoulder impingement syndrome SIS n = 29 shoulder joint instability SJI). The measurement instruments used were the VAS, DASH, SPADI, and EMGBF. It was followed the DS protocol proposed by Santos and Matias (2007), according to the three phases of intervention, described by performing a weekly session, monitoring exercises that follow these principles, with EMGBF. The variables were pain, posture, recruitment pattern, motor control, the initial position of the scapula (IPS), range of motion (ROM), muscular strength (MS) and posture. To analyze the data, we used the descriptive and inferential statistics. Results: The intervention was effective in abolishing the pain at the time (0.43 to 0.00/10 VAS in the SIS subgroup and 0.66 to 0.00/10 VAS in the SJI subgroup) in worst pain (5.47 to 0,06/10 VAS in the SIS subgroup and 5.28/ to 0.14/10 VAS in the SJI subgroup), increasing the function (28,57 to 0,66/100 DASH and 39,00 to 0,63/100 SAPDI in the SIS subgroup and 25,80 to 0,38/100 DASH and 28,19 to 0,39/100 SPADI in the SJI subgroup) and the increase in DS of the scapula with normalization of the pattern recruitment, motor control, IPS within the spectrum of normalcy and good ability to control its position along the movement of the upper limb (UL). The intervention provided, although the normalization of ROM, MS and self-correcting posture. The average length of intervention was 6.45 weeks in the SIS subgroup and 5.83 in the IS subgroup. These results are comparable with similar studies that used an intervention based on the same principles (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusion: The intervention protocol implemented with the use of exercises based on the principles of DS and the use of EMGBF was effective, allowing the accomplishment of goals, in patients with DSJC (SIS and SJI). It was found that, regardless of condition, the results were identical in both groups, showing no significant differences between the variables of the final measure, the total time of intervention and the times to reach discharge criteria, except for pain, which was higher in the SIS subgroup.

Multifunctional Biosensor Based on Localized Surface Plasmon Resonance for Monitoring Small Molecule–Protein Interaction

We report an optical sensor based on localized surface plasmon resonance (LSPR) to study small-molecule protein interaction combining high sensitivity refractive index sensing for quantitative binding information and subsequent conformation-sensitive plasmon-activated circular dichroism spectroscopy. The interaction of α-amylase and a small-size molecule (PGG, pentagalloyl glucose) was log concentration-dependent from 0.5 to 154 μM. In situ tests were additionally successfully applied to the analysis of real wine samples. These studies demonstrate that LSPR sensors to monitor small molecule–protein interactions in real time and in situ, which is a great advance within technological platforms for drug discovery.

Novel LTCC-potentiometric microfluidic device for biparametric analysis of organic compounds carrying plastic antibodies as ionophores: Application to sulfamethoxazole and trimethoprim

Monitoring organic environmental contaminants is of crucial importance to ensure public health. This requires simple, portable and robust devices to carry out on-site analysis. For this purpose, a low-temperature co-fired ceramics (LTCC) microfluidic potentiometric device (LTCC/μPOT) was developed for the first time for an organic compound: sulfamethoxazole (SMX). Sensory materials relied on newly designed plastic antibodies. Sol–gel, self-assembling monolayer and molecular-imprinting techniques were merged for this purpose. Silica beads were amine-modified and linked to SMX via glutaraldehyde modification. Condensation polymerization was conducted around SMX to fill the vacant spaces. SMX was removed after, leaving behind imprinted sites of complementary shape. The obtained particles were used as ionophores in plasticized PVC membranes. The most suitable membrane composition was selected in steady-state assays. Its suitability to flow analysis was verified in flow-injection studies with regular tubular electrodes. The LTCC/μPOT device integrated a bidimensional mixer, an embedded reference electrode based on Ag/AgCl and an Ag-based contact screen-printed under a micromachined cavity of 600 μm depth. The sensing membranes were deposited over this contact and acted as indicating electrodes. Under optimum conditions, the SMX sensor displayed slopes of about −58.7 mV/decade in a range from 12.7 to 250 μg/mL, providing a detection limit of 3.85 μg/mL and a sampling throughput of 36 samples/h with a reagent consumption of 3.3 mL per sample. The system was adjusted later to multiple analyte detection by including a second potentiometric cell on the LTCC/μPOT device. No additional reference electrode was required. This concept was applied to Trimethoprim (TMP), always administered concomitantly with sulphonamide drugs, and tested in fish-farming waters. The biparametric microanalyzer displayed Nernstian behaviour, with average slopes −54.7 (SMX) and +57.8 (TMP) mV/decade. To demonstrate the microanalyzer capabilities for real applications, it was successfully applied to single and simultaneous determination of SMX and TMP in aquaculture waters.

Rapid automated method for on-site determination of sulfadiazine in fish farming: a stainless steel veterinary syringe coated with a selective membrane of PVC serving as a potentiometric detector in a flow-injection-analysis system

Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% onitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade-1 down to 1.0×10-5 mol L-1, with a limit of detection of 3.1×10-6 mol L-1 in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography–tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.

A disposable glass-based immunosensor for monitoring the cancer biomarker CEA in urine

NanoPT 2014 International Conference, in Portugal, on February 12-14. Poster presentation based on topic Nanobio/Nanomedicine

Condition-Based Diagnosis of Mechatronic Systems Using a Fractional Calculus Approach

While fractional calculus (FC) is as old as integer calculus, its application has been mainly restricted to mathematics. However, many real systems are better described using FC equations than with integer models. FC is a suitable tool for describing systems characterised by their fractal nature, long-term memory and chaotic behaviour. It is a promising methodology for failure analysis and modelling, since the behaviour of a failing system depends on factors that increase the model’s complexity. This paper explores the proficiency of FC in modelling complex behaviour by tuning only a few parameters. This work proposes a novel two-step strategy for diagnosis, first modelling common failure conditions and, second, by comparing these models with real machine signals and using the difference to feed a computational classifier. Our proposal is validated using an electrical motor coupled with a mechanical gear reducer.

Sympathetic overactivity and arrhythmias in tetanus: electrocardiographic analysis

As a result of the advances in the control of pulmonary insufficiency in tetanus, the cardiovascular system has increasingly been shown to be a determining factor in morbidity and mortality but detailed knowledge of the cardiovascular complications in tetanus is scanty. The 24h-Holter was carried out in order to detect arrhythmias and sympathetic overactivity in 38 tetanus patients admitted to an ICU. The SDNN Index (standard deviation from the normal R-to-R intervals), was useful in detecting adrenergic tonus, and ranged from 64.1 ± 27 in the more severe forms of tetanus to 125 ± 69 in the milder ones. Sympathetic overactivity occurred in 86.2% of the more severe forms of the disease, but was also detected in 33% of the milder forms. Half the patients had their sympathetic overactivity detected only by the Holter. The most frequent arrhythmias were isolated supraventricular (55.2%) and ventricular (39.4%) extrasystoles. There was no association of the arrhythmias with the clinical form of tetanus or with the presence of sympathetic overactivity. The present study demonstrated that major cardiovascular dysfunction, particularly sympathetic overactivity, occurs in all forms of tetanus, even in the milder ones. This has not been effectively detected with traditional monitoring in ICU and may not be properly treated.

Cohesive law estimation of adhesive joints in mode II condition

The adhesive bonding technique enables both weight and complexity reduction in structures that require some joining technique to be used on account of fabrication/component shape issues. Because of this, adhesive bonding is also one of the main repair methods for metal and composite structures by the strap and scarf configurations. The availability of strength prediction techniques for adhesive joints is essential for their generalized application and it can rely on different approaches, such as mechanics of materials, conventional fracture mechanics or damage mechanics. These two last techniques depend on the measurement of the fracture toughness (GC) of materials. Within the framework of damage mechanics, a valid option is the use of Cohesive Zone Modelling (CZM) coupled with Finite Element (FE) analyses. In this work, CZM laws for adhesive joints considering three adhesives with varying ductility were estimated. The End-Notched Flexure (ENF) test geometry was selected based on overall test simplicity and results accuracy. The adhesives Araldite® AV138, Araldite® 2015 and Sikaforce® 7752 were studied between high-strength aluminium adherends. Estimation of the CZM laws was carried out by an inverse methodology based on a curve fitting procedure, which enabled a precise estimation of the adhesive joints’ behaviour. The work allowed to conclude that a unique set of shear fracture toughness (GIIC) and shear cohesive strength (ts0) exists for each specimen that accurately reproduces the adhesive layer’ behaviour. With this information, the accurate strength prediction of adhesive joints in shear is made possible by CZM.

Confined Placental Mosaicism in Chorionic Vilus Sampling - Case Report

Objectives: Chorionic Vilus Sampling (CVS) has several advantages over amniocentesis: it may be performed at an earlier gestational age, the results are quicker to obtain and there’s a lower miscarriage risk – 1%. However, the higher prevalence of discrepant fetal and vilus sampling material’s karyotype findings is a disadvantage of this technique – 0.5%. This is caused, amongst other causes, by placental mosaicism which consists of two genetically different cell lines. There are three types of placental mosaicism according to the abnormal cell line location: Type I – in the cytotrophoblast; Type II – in the vilus’ stroma; Type III – in both the above locations. Material and Methods: We present a case report about a 36-year-old pregnant woman going through our Department’s 1st trimester combined screening program; a CVS was performed, which showed Confined Placental Mosaicism (CPM). Results and Conclusion: Although the pregnant woman was in the low-risk group for aneuploidy, the patient wanted the cytogenetic study to be performed in order to reduce maternal anxiety. CVS was performed at the gestational age of 12 weeks + 5 days and the karyotype was 47XY+2/46XY. For the correct interpretation of this data an amniocentesis was performed at the gestational age of 15 weeks + 6 days, which showed a 46XY karyotype. We therefore conclude that the cytogenetic analysis of the CVS was the result of a CPM. A careful follow-up including fetal echocardiogram and seriated ultrasonographic monitoring was used to safely exclude malformations and fetal growth restriction. We verified no occurences throughout pregnancy, delivery and perinatal period. CVS practice was recently implemented in our country and has many advantages over amniocentesis. Besides the fact that an earlier gestational age usually means less affective bonding to the fetus and therefore makes medical termination of pregnancy somewhat less difficult, one should consider specific situations like the one reported in which CPM may be diagnosed. This condition is associated with increased risk of fetal growth restriction, so the clinician should be aware of the need for a more careful follow-up, since perinatal complications, which should be anticipated and treated, can be expected in 16-21% of these cases.

Safety function analysis in an industrial production process

Dissertação para obtenção do Grau de Mestre em Engenharia e Gestão Industrial

HIV-2 Integrase Polymorphisms and Longitudinal Genotypic Analysis of HIV-2 Infected Patients Failing a Raltegravir-Containing Regimen

To characterize the HIV-2 integrase gene polymorphisms and the pathways to resistance of HIV-2 patients failing a raltegravir-containing regimen, we studied 63 integrase strand transfer inhibitors (INSTI)-naïve patients, and 10 heavily pretreated patients exhibiting virological failure while receiving a salvage raltegravir-containing regimen. All patients were infected by HIV-2 group A. 61.4% of the integrase residues were conserved, including the catalytic motif residues. No INSTI-major resistance mutations were detected in the virus population from naïve patients, but two amino acids that are secondary resistance mutations to INSTIs in HIV-1 were observed. The 10 raltegravir-experienced patients exhibited resistance mutations via three main genetic pathways: N155H, Q148R, and eventually E92Q - T97A. The 155 pathway was preferentially used (7/10 patients). Other mutations associated to raltegravir resistance in HIV-1 were also observed in our HIV-2 population (V151I and D232N), along with several novel mutations previously unreported. Data retrieved from this study should help build a more robust HIV-2-specific algorithm for the genotypic interpretation of raltegravir resistance, and contribute to improve the clinical monitoring of HIV-2-infected patients.