Adesivo tecidual de fibrina e sua aplicação na implantodontia

The purpose of this literature review was to evaluate the use of fibrin tissue adhesive in implant dentistry. Materials and Methods: A literature search of Medline-PubMed for articles published, describing the use of fibrin tissue adhesive in implant dentistry was performed and articles were critically reviewed. Results: The literature review reveals clinical trials and experimental studies with regard to the use of fibrin tissue adhesive in implant dentistry. This material consists of 2 components: highly purified, freeze-dried human fibrinogen with factor XIII and a starter solution containing human thrombin. Clotting factor XIII is admitted for reinforcement of the fibrin network. The components are reconstituted before use and when mixed form a clot by mimicking the terminal phase of the physiological clotting cascade. Several studies showed that fibrin tissue adhesive is fully absorbed by macrophages within 2 weeks of application. Adhesive fibrin tissue may be used for to prevent bone loss, to create contour in the periimplant soft tissue and osseous tissue, to sculpt emergence profile for prosthetic components and to mimic tissue architecture. In the last years fibrin tissue adhesive also find use as material for the controlled delivery of drugs and biologics. Conclusions: The fibrin tissue adhesive presents good properties such as biocompatibility, hemostatic properties and ability to break down like the physiologic clot. This material, alone or associated with other materials, can be used with the implants immediately after extraction. In this condition it brings the necessary anchoring and efficient maintenance of osseous/mucosal contour, which it is important for the clinical success.

Impacto do controle glicêmico sobre as complicações associadas ao diabetes mellitus na osseointegração

The increased prevalence of diabetic individuals has become a public health problem. Diabetes Mellitus is a metabolic disorder characterized by an increase in plasma glucose levels. It impairs the physiological equilibrium in utilization of carbohydrate by tissues. The persistent hyperglycemia can produce deleterious effects on bone formation due the microvascular complication. The present paper reviews the bibliography linking the impact of glycemic control at complications associated at diabetes mellitus on osseointegration. In experimental models of diabetes it was observed a reduced level of bone-implant contact. This failure can be reduced by means of hyperglycemia control. Also, several studies point the beneficial effect of coated implant on osseointegration process. It is necessary to take special care into account for the placement of implants in diabetic patient and improve the percentages of implant survival. A rigorous control of plasma glycaemia, together with other measures, like as absence of chronic complications, good oral hygiene and regular medical follow-up has been related to rising the percentages of successful in diabetic patients.

Clareamento dentário x autoestima x autoimagem

Dental changes that compromise facial harmony can have serious consequences on the social image of the patient. Depending on the emotional significance for the individual it can change interpersonal relationships, causing profound changes in their patterns of self-acceptance and self-image, with profound effects on their self-esteem of the patient. The search for tooth whitening as cosmetic factor for a harmonic smile grew sharply in the last decade. Although the color of the tooth represents only one aspect in the set of determinants of facial harmony, it is a strong factor because it is quickly perceived. This study aims to report the clinical case of a patient with spots on their upper central incisors. For the patient these spots have compromised her smile, causing harm and discomfort in their everyday social and professional relationships.

Sistemas de retenção O'ring e barra-clipe em overdenture mandibular

The dissatisfaction of the treatment with mandibular complete dentures in edentulous patients has been a constant problem in Dentistry. Often, the absence of stability and retention, resultants of a physiologic condition and alveolar ridge resorption, bring reduction of chewing force, speech problems and social life interference. In these cases, the rehabilitation over osseointegrated implants can be an effective and safe alternative of treatment. When it is not possible to put implants in appropriate number and disposition, it is necessary to make a simple and low costing prosthetic planning, which makes resurge the overdentures. Various implant supported attachment systems for overdentures have been developed in the dental market. Thus, intending to facilitate the professional choice, this study review the literature about attachment systems O’ring and bar- clip in its following aspect: retention level, stress distribution, hygiene complications and patient satisfaction.

Registro do perfil de emergência para mimetização dos dentes naturais na região estética

Introdução: o tratamento com implantes dentários para a reposição de dentes na região estética exige a utilização de materiais e técnicas que permitam o máximo de naturalidade entre a restauração, os dentes vizinhos e o tecido gengival. Dessa forma, torna-se necessário criar o correto perfil de emergência para o dente, assim como a utilização de materiais com alto potencial estético. Objetivo: o objetivo do presente trabalho foi ilustrar, através de um caso clínico, a utilização de uma técnica de moldagem para a correta cópia do perfil de emergência do dente e sua transferência para o modelo de trabalho, tornando possível a confecção de uma restauração totalmente cerâmica, perfeitamente integrada ao tecido gengival. Caso clínico: paciente de 30 anos, procurou o clínica de prótese dentária com desejo de melhorar a estética dos dentes. Após diagnóstico e planejamento, foram confeccionadas 2 coroas totalmente cerâmicas sobre os dentes 12 e 21, e confecção de 1 coroa cerâmica sobre um pilar de zircônia após o estabelecimento e registro do perfil de emergência do dente 11. Conclusão: após a conclusão do tratamento, observou-se naturalidade, estética e perfeita integração entre as restaurações, os dentes remanescentes e o tecido gengival.

Resolução estética associando prótese sobre implante e prótese convencional na região anterior

The combination of several methods for solving aesthetics in a clinical case can be a complicating factor. The diagnosis and planning of the event held in conjunction with the dental technician expand the possibilities of success. The present case illustrates the aesthetic resolution through the association of implant- and tooth-supported prostheses using metal free ceramic systems. A 38-year old male patient presented with a complex smile. After diagnosis and treatment planning, two ceramic crowns were made, one on tooth 11 and one on the implant region 21, along with a laminated porcelain veneer on the region of 12. Aesthetic needs of the patient are predictable only with a sound diagnosis.

Reabilitação estética com enfoque nas diferentes cores de substratos e na escolha da cor do cimento adesivo

The evolution of techniques and materials applied to adhesive ceramic restorations resulted in the intensification of its use, proving to be an excellent method of aesthetic restoration. Some important features of this technique are its conservative preparation, which avoids an excessive loss of tooth structure and its high aesthetic value provided by the ceramic even when utilized under different color of dental substrates. The aim of this paper was to report a clinical case with full crowns, porcelain veneers and non-prep veneers, enhancing peculiarities related to the material used, tooth preparation techniques, cementing, indications and contraindications.

Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 in the Pubmed database from the keyword "Class III malocclusion". However, only 19 articles that addressed the compensatory treatment of Class III were selected. Based on the selected items it was concluded that the treatment of Class III malocclusions in children before the peak of pubertal growth has better prognosis with greater effects orthopedic and orthodontic minor effects. The ideal treatment option for this condition is the Rapid maxillary expansion associated with maxillary protraction of the same. The treatment of Class III malocclusion in young people after the peak of pubertal growth is doubtful prognosis. You can opt to treat rapid maxillary expansion and maxillary protraction of the same or fixed appliance, however, orthopedic effects can be the same or smaller than the orthodontic effects, depending on the age of the patient. Depending on the degree of Class III malocclusion in adults, the treatment will consist of dental compensations or orthognathic surgery.

Avaliação dos preparos da superfície cerâmica para a colagem de acessórios ortodônticos

The purpose of this study was to evaluate the effects of two conditioning methods used to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. A total of 18 feldspathic specimens were used. The specimens were divided randomly into two groups (n = 9): group free silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive); group silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by silane (Silano Ângelus) for 1 minute, adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive). All specimens were stored in solution of artificial saliva at ambient temperature for 24 hours. The debonding was done with shear strength through a universal testing machine (DL 500-Emic) calibrated with a fixed speed of 1mm/minute. Statical analysis was performed using the Student t test. The results indicated that in the free silane group the mean bond strength was 9,97 MPA, significantly lower than the silane group, that was 12,38 MPa (p < 0,05). The both groups were effective for bonding, although the silane group had the highest bond strength values.

Work conditions and occupational health of dentists in Brazilian public health system

Conselho Nacional de Desenvolvimento Ciêntífico e Tecnológico (CNPq)

Opportunistic microorganisms in patients with head and neck trauma

The use of antimicrobial agents has facilitated the dissemination of multi-resistant microorganisms, compromising dental and medical treatment. The aim of this study was to evaluate the distribution of different opportunistic microbial species in patients who suffered head and neck trauma, under temporary maintenance in nosocomial environment, particularly intensive care units, on the occurrence of such microorganisms in the oral cavity of the patients. It was selected 38 patients subjected to head and neck traumas. After emergency surgical procedures, clinical samples of saliva, sub and supragingival biofilms and mucosal surfaces were collected at two different moments: just after stabilization of the patient and soon after patients’ release from medical units. The presence of opportunistic and superinfecting microorganisms was evaluated by culture on selective and non-selective media, and the presence of the family Enterobacteriaceae, as well as genera Enterococcus, Pseudomonas, and Staphylococcus was assessed by PCR. It was found that the use of antimicrobials, even for short periods of time was sufficient to facilitate colonization by microorganisms of the families Enterobacteriaceae and Pseudomonadaceae, as well as yeasts and enterococci. These results support the concept that medical and dental teams should make a periodically change of antimicrobials used in treatment protocols in hospital for head and neck trauma patients, in order to minimize dissemination of opportunistic or superinfecting microorganisms.

Crescimento epitaxial e caracterização de filmes finos: óxidos condutores e ferroelétricos preparados por deposição de solução química

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cimentos bioativos injetáveis funcionalizados com peptídeo osteogênico para reparação óssea

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese de aluminas macro-mesoporosas pelo método sol-gel acompanhado de separação de fases

Pós-graduação em Química - IQ

Torneamento da liga de alumínio da classe 6005 utilizando ferramenta cerâmica

Machining processes are one of the most important manufacturing processes in the modern world. In these processes, there are many elements which will influence in the final result of the machined part. Among them, the tools are the principal factor of the rising cost, because its global influence on the process. In aeronautical industries, this can be more evidenced due the need to machining several alloys, between them, aluminum alloys. These alloys have to demonstrate a specific surface finishing to be used in aircraft's fuselage. This kind of industry is one of the segments which is still rising in Brazil, and they are looking viable alternatives in the manufacturing processes of materials, due the need to produce more and more parts and equipment, with costs increasingly reduced. The purpose of this project is the development of a ceramic with differentiated properties. The ceramics were developed using a pre-sintering at 1200 °C, with posterior sintering at 1600°C, and subjected to dry turning process on aluminum alloy 6005. The characterizations showed that ceramics presented with toughness on the center of 1700 MPa and on the surface of 1950 MPa, density 98,5 ±0,14. g/cm³. Ceramics were grinded and faceted, according to ISO standard 1832, and subjected to turning tests in a ROMI lathe brand, model GL240M, using cutting speeds of 500, 800 and 1000 m/min with different feed rates. The machining results showed low occurrence of flank wear to all cutting speeds, and better surface finishing average values of Ra = 0,4935 μm and Rt = 8,112 μm. In general, it could be seen that the tool presents important potential to machining 6005 alloy, and that the use of correct parameters can decrease and/or eliminate subsequent processes, providing important reductions in costs related to the machining processes