Dinoflagellate cyst counts of sediment core GIK23071-3

Marine sediments from the Vøring Plateau (Norwegian Sea) have been studied for their dinoflagellate cyst (dinocyst) and foraminiferal content in order to reconstruct sea-surface conditions in the eastern Norwegian Sea during Marine Isotope Stage (MIS) 5e. In combination with stable oxygen isotope and ice rafted detritus (IRD) data, the variations in foraminiferal and dinocyst assemblage composition reflect a stepwise transition from the final phase of deglaciation (Termination II) into typical interglacial conditions. This stepwise change is repeated subsequently during the cooling conditions of glacial inception towards MIS 5d. The interval studied is characterized by relatively high abundances of Bitectatodinium tepikiense, in comparison to present-day values in the area, indicating a larger seasonal temperature amplitude with enhanced surface water stratification during MIS 5e. The important occurrence of the warm-temperate dinocyst Spiniferites mirabilis s.l. concurrent with subpolar foraminifers Turborotalita quinqueloba, Globigerina bulloides, and Globigerinita glutinata reveals that most pronounced interglacial marine conditions prevailed in the area just prior to the transition towards MIS 5d. The late stratigraphic position of this phase in the interglacial is verified by comparison with dinocyst data from south of Iceland, manifesting its over-regional implication. Besides the good agreement in dinocyst and foraminiferal assemblage changes, the variations in and between both fossil assemblages also point to the existence of some significant surface water variability in the eastern Norwegian Sea during MIS 5e.

Chironomid-inferred July-air temperature of Lago Piccolo di Avigliana

Chironomid headcapsules were used to reconstruct late glacial and early-Holocene summer temperatures at Lago Piccolo di Avigliana (LPA). Two training sets (northern Sweden, North America) were used to infer temperatures. The reconstructed patterns of temperature change agreed well with the GRIP and NGRIP d18O records. Inferred temperatures were high during the Bølling (ca 19 °C), slowly decreased to ca 17.5 °C during the Allerød, reached lowest temperatures (ca 16 °C) during the Younger Dryas, and increased to ca. 18.5 °C during the Preboreal. The amplitudes of change at climate transitions (i.e. Oldest Dryas/Bølling: 3 °C, Allerød/Younger Dryas: 1.5 °C, and Younger Dryas/Preboreal: 2.5 °C) were smaller than in the northern Alps but similar to those recorded at another site in northeastern Italy. Our results suggest that (1) Allerød temperatures were higher in the southern Alps and (2) higher during the Preboreal (1 °C) than during the Allerød. These differences might provide an explanation for the different responses of terrestrial-vegetation to late glacial and early-Holocene climatic changes in the two regions. Other sites on both sides of the Alps should be studied to confirm these two hypotheses.

Late-Holocene Mass Movements in High Arctic East Lake, Melville Island (Western Canadian Arctic Archipelago)

East Lake, located at Cape Bounty (Melville Island, Canadian High Arctic), was mapped using a high-resolution swath bathymetric sonar and a 12 kHz sub-bottom profiler, allowing for the first time the imaging of widespread occurrence of mass movement deposits (MMDs) in a Canadian High Arctic Lake. Mass movements occurred mostly on steep slopes located away from deltaic sedimentation. The marine to lacustrine transition in the sediment favours the generation of mass movements where the underlying massive mud appears to act as a gliding surface for the overlying varved deposits. Based on acoustic stratigraphy, we have identified at least two distinct events that triggered failures in the lake during the last 2000 years. The synchronicity of multiple failures and their widespread distribution suggest a seismic origin that could be related to the nearby Gustaf-Lougheed Arch seismic zone. Further sedimentological investigations on the MMDs are however required to confirm their age and origin.

The role of vitamin D signalling in the interaction between mesenchymal mammary tumour cells and macrophages

The transition of epithelial-like tumour cells to those exhibiting mesenchymal characteristics (Epithelial-to-mesenchymal Transition; EMT) is an integral process in breast cancer metastasis. EMT can be promoted by Transforming growth factor-beta (TGF-β) which can be found at high levels in the tumour stroma. Tumour-associated macrophages (TAMs) can also induce EMT in breast cancer cells, which is one way that they promote breast cancer metastasis. Vitamin D signalling has been implicated in EMT suppression and plays a role in modulating macrophage differentiation and stimulating their anti-inflammatory functions. This project had two major aims. First, we aimed to create and verify a unique fluorescent reporter gene construct designed to evaluate the dynamics of EMT in real-time and at the single-cell level. While some components of this reporter system were successfully validated, work to complete the final reporter construct is ongoing. The second and main aspect of this project focused on exploring the ability of 1,25-dihydroxyvitamin D3 (1,25D3) to modulate the interaction between mesenchymal mammary tumour cells and TAMs. Unexpectedly, in short-term treatment (48 hours) studies of 4T1 murine mammary tumour cells, we observed that 1,25D3 and TGF-β signalling work together to increase expression of the mesenchymal markers, Snai1, Fn1, and Col1a1. 1,25D3 and TGF-β also synergistically activate transcription of the gene encoding the 1,25D3-catabolizing enzyme, Cyp24a1. The ability of 1,25D3 and TGF-β to enhance expression of these genes was diminished in a long-term treatment (14 days) of 4T1 cells, and this effect was accompanied by a decrease in cell proliferation. 1,25D3 may also cooperate with cytokines produced by normal macrophages and macrophages considered to be TAM-like. Conditioned media experiments revealed that in the presence of factors from normal macrophages, 1,25D3 enhanced expression of Fn1, and in the presence of factors from TAM-like macrophages, 1,25D3 enhanced expression of Fn1 and Cyp24a1. Rather than mitigating the interaction as hypothesized, 1,25D3 may exacerbate the tumour-promoting effects of the EMT-TAM relationship. Also, signalling pathways involved in the EMT-TAM relationship may synergize with 1,25D3 to upregulate Cyp24a1 expression. These findings are important for understanding the potential of vitamin D compounds to be used in the treatment of breast cancer.

LES of flame acceleration and DDT in hydrogen-air mixture using artificially thickened flame approach and detailed chemical kinetics

A large eddy simulation is performed to study the deflagration to detonation transition phenomenon in an obstructed channel containing premixed stoichiometric hydrogen–air mixture. Two-dimensional filtered reactive Navier–Stokes equations are solved utilizing the artificially thickened flame approach (ATF) for modeling sub-grid scale combustion. To include the effect of induction time, a 27-step detailed mechanism is utilized along with an in situ adaptive tabulation (ISAT) method to reduce the computational cost due to the detailed chemistry. The results show that in the slow flame propagation regime, the flame–vortex interaction and the resulting flame folding and wrinkling are the main mechanisms for the increase of the flame surface and consequently acceleration of the flame. Furthermore, at high speed, the major mechanisms responsible for flame propagation are repeated reflected shock–flame interactions and the resulting baroclinic vorticity. These interactions intensify the rate of heat release and maintain the turbulence and flame speed at high level. During the flame acceleration, it is seen that the turbulent flame enters the ‘thickened reaction zones’ regime. Therefore, it is necessary to utilize the chemistry based combustion model with detailed chemical kinetics to properly capture the salient features of the fast deflagration propagation.

HNF1B variants associate with promoter methylation and regulate gene networks activated in prostate and ovarian cancer

Two independent regions within HNF1B are consistently identified in prostate and ovarian cancer genome-wide association studies (GWAS); their functional roles are unclear. We link prostate cancer (PC) risk SNPs rs11649743 and rs3760511 with elevated HNF1B gene expression and allele-specific epigenetic silencing, and outline a mechanism by which common risk variants could effect functional changes that increase disease risk: functional assays suggest that HNF1B is a pro-differentiation factor that suppresses epithelial-to-mesenchymal transition (EMT) in unmethylated, healthy tissues. This tumor-suppressor activity is lost when HNF1B is silenced by promoter methylation in the progression to PC. Epigenetic inactivation of HNF1B in ovarian cancer also associates with known risk SNPs, with a similar impact on EMT. This represents one of the first comprehensive studies into the pleiotropic role of a GWAS-associated transcription factor across distinct cancer types, and is the first to describe a conserved role for a multi-cancer genetic risk factor.

A New Method for Estimating the Moisture Content and Flexibility of Polymerised Bentonite Clay Mat

This paper presents a scientific development to address the current absence of a convenient technique to identify the ductile to brittle transition of bentonite clay mats. The instrumented indentation and 3-point bending tests were performed on different liquid polymer hydrated bentonite clay mats at varying moisture content. Properties measured include modified Brinell Hardness Number (BHN) and elastic structural stiffness (EI). The dependence of flexural stiffness on moisture content is demonstrated to conform to a best power function variation. The ductile to brittle transition of clay mat is affected primarily by the change in the moisture content and for the clay mat to remain flexible, critical moisture content of 1.7 times of its plastic limit is required. Results also indicate that a strong correlation between indentation hardness and the structural stiffness. The subsequent outcome in the development of a portable quality control device to monitor the acceptable moisture content level to ensure flexibility of the clay mats was also described in this paper.

Magnetophotoresistance in Pr 1–x CaxMnO3 Thin Films

In this work, a colossal magnetoresistive (CMR) Pr1−xCaxMnO3 (PCMO) man- ganite thin films and polycrystalline samples were studied with the main focus on the properties of the insulator to metal Mott phase transition. The polycrystalline PCMO samples were fabricated with the solid state reaction method. The polycrystalline sam- ples were further processed into the epitaxial thin films with the pulsed laser deposition method (PLD). The structural and magnetic properties of the samples were systemat- ically investigated and the thin films samples were further investigated with magneto- transport measurement where the thin films response to illumination was also studied. After the successful synthesis of polycrystalline PCMO samples with varying x = between 0.0 - 0.5, the magnetic characterization of the samples showed rich magnetic properties having the signatures of the magnetic phase coexistence of antiferromag- netic (AFM) and ferromagnetic (FM) ordering and cluster glass behaviour. With the increased doping concentration from x = 0.3 to 0.5, the AFM charge-order (CO) phase started to form up being strongest on the sample x = 0.5. This AFM CO phase could be melted with the high external magnetic field at temperatures below Neel’s tempera- ture TN inducing an irreversible first order metamagnetic AFM to FM phase transition. The strength of the AFM CO phase decreased with decreasing Ca concentration and increasing temperature. The polycrystalline PCMO samples with Ca concentrations of 0.3 - 0.5, showing metamagnetic behaviour, were selected for the fabrication of the thin film samples. The films were grown using two different in situ oxygen treatment temperatures at 500 ◦C and 700 ◦C in the PLD system. The films with x = 0.4 and 0.5 showed weaker AFM CO phase with greatly reduced melting fields when compared to polycrystalline samples. Also, the robustness of the AFM CO phase was further decreased in thin films with the lower oxygen treatment temperature of 500 ◦C. The magneto-transport measurements made on the thin films showed that the melting of AFM CO phase was connected to CMR effect where the increasing magnetic field induced an insulator to metal phase transition, which reduces the resistivity of the film around nine orders of magnitude. The use of illumination during the magneto-transport measurements showed a vari- ety of intriguing phenomena including magnetophotoresistance. The illumination had a huge effect to the insulator to metal transition (IMT) reducing the transition magnetic field significantly. Moreover, by magnetically biasing the thin films with the constant external magnetic field, the IMT could be induced by switching on the illumination.

THE HEALTH OF YOUNG ADULTS WITH DISABILITIES IN THE UNITED STATES: THE COLLECTIVE ROLES OF RISK FACTORS IN SOCIAL ECOLOGIC FRAMEWORK

Background: Over the last few decades, the prevalence of young adults with disabilities (YAD) has steadily risen as a result of advances in medicine, clinical treatment, and biomedical technologythat enhanced their survival into adulthood. Despite investments in services, family supports, and insurance, they experience poor health status and barriers to successful transition into adulthood. Objectives: We investigated the collective roles of multi-faceted factors at intrapersonal, interpersonal and community levels within the social ecological framework on health related outcome including self-rated health (SRH) of YAD. The three specific aims are: 1) to examine sociodemographic differences and health insurance coverage in adolescence; 2) to investigate the role of social skills in relationships with family and peers developed in adolescence; and 3) to collectively explore the association of sociodemographic characteristics, social skills, and community participation in adolescence on SRH. Methods: Using longitudinal data (N=5,020) from the National Longitudinal Transition Study (NLTS2), we conducted multivariate logistic regression analyses to understand the association between insurance status as well as social skills in adolescence and YAD’s health related outcomes. Structural equation modeling (SEM) assessed the confluence of multi-faceted factors from the social ecological model that link to health in early adulthood. Results: Compared with YAD who had private insurance, YAD who had public health insurance in adolescence are at higher odds of experiencing poorer health related outcomes in self-rated health [adjusted odds ratio (aOR=2.89, 95% confidence interval (CI): 1.16, 7.23), problems with health (aOR=2.60, 95%CI: 1.26, 5.35), and missing social activities due to health problems (aOR=2.86, 95%CI: 1.39, 5.85). At the interpersonal level, overall social skills developed through relationship with family and peers in adolescence do not appear to have association with health related outcomes in early adulthood. Finally, at the community level, community participation in adolescence does not have an association with SRH in early adulthood. Conclusions: Having public health insurance coverage does not equate to good health. YAD need additional supports to achieve positive health outcomes. The findings in social skills and community participation suggest other potential factors may be at play for health related outcomes for YAD and the need for further investigation.

Processo de transição da pessoa estomizada da depêndencia de cuidado ao autocuidado: subsídios à enfermagem

Objetivou-se conhecer como a pessoa com estomia vivência o processo de transição da dependência de cuidados ao autocuidado à luz da Teoria das Transições de Meleis. Pesquisa exploratória, descritiva com abordagem qualitativa no Serviço de Estomaterapia do Hospital Universitário Dr Miguel Riet Corrêa Jr do Rio Grande/ RS/ Brasil com 27 pessoas com estomias definitivas por câncer. Os dados foram coletados nos mês de janeiro e fevereiro de 2014 por meio de entrevista com roteiro semiestruturado e submetidos à Análise de Conteúdo apoiada nas ideias da Teoria das Transições de Afaf I. Meleis. Constatou-se que a natureza da transição situou-se no processo tipo saúde/doença. A entrada no processo de transição deu-se a partir da consciência desencadeada pelo diagnóstico de câncer, reforçado pela cirurgia de estomização. O empenhamento surge ao dedicarem-se a construção do conhecimento para o autocuidado frente às mudanças na sua vida e na sua nova relação com seu corpo, mudando a visão de si, do mundo e dos outros. Destacou-se o espaço temporal como algo dinâmico e variavelmente indeterminável, sendo fundamental para que se organizem e reflitam acerca do seu novo viver, fortalecendo-se para que a transição progrida. Verificaram-se como fatores facilitadores do autocuidado a construção de um significado positivo à estomização, o preparo dessa experiência ainda no pré-operatório, a estabilidade emocional, a fé e a religiosidade e a sensação de normalidade adquirida a partir de uma imagem próxima da anterior. Referiram-se, ainda, ao fornecimento de forma gratuita pelo governo das bolsas coletoras, adjuvantes e acessórios e ao atendimento da equipe multiprofissional. Como fatores inibidores do processo de transição encontraram-se a visão distorcida de seu corpo, o despreparo para viver com a estomia, a instabilidade emocional, a desmotivação com afastamento de atividades prazerosas, o cuidado excessivo e/ou estendido e até mesmo a superproteção da família, as complicações como hérnias e prolapsos, a falta de atitudes positivas quanto à vida, a negação da bolsa coletora, as tentativas frustradas de omitir o uso da bolsa coletora, a falta do domínio do manuseio dos equipamentos, o afastamento do trabalho e as dificuldades financeiras. Além destas, o abandono do parceiro, atitudes negativas e estigmatizantes por parte da família e a baixa qualidade dos materiais fornecidos pelo governo. Como indicadores de resultados identificaram-se a confiança para realizar atividades anteriores, aceitação de sua situação, uma visão positiva de sua vida e da capacidade de compartilhar o seu cuidado com sua família. Considera-se a saída da transição quando este for capaz de dominar novas competências tanto para o cuidado físico ao realizar a troca da bolsa coletora quanto readequando sua imagem e autoconceito. Concluiu-se que o processo de transição da dependência de cuidados ao autocuidado da pessoa com estomia é complexo e carregado de subjetividades. É necessário que o enfermeiro estabeleça ações terapêuticas de enfermagem eficazes e eficientes, contribuindo para a promoção e reabilitação da saúde deste, auxiliando-o na aquisição de sua autonomia e independência, subsidiando seu autocuidado e bem-estar.

Controladores repetitivos aplicados a filtros ativos de potência sob variações de carga e de frequência da rede

This work presents the development and modification of techniques to reduce the effects of load variation and mains frequency deviation in repetitive controllers applied to active power filters. To minimize the effects of aperiodic signals resulting from the connection or disconnection of non-linear loads is developed a technique which recognizes linear and nonlinear loads, and operates to reset the controller only when the error due to the transition of considerable value, and the transition is from non-linear to linear load. An algorithm to adapt the gain of the repetitive controller, based on a sigmoid function adaptation, in order to minimize the effects caused by random noise in the measurement system is also used. This work also analyzes the effects of frequency variation and presents the main methods to cope with this situation. Some solutions are the change in the number of samples per period and the variation of the sampling rate. The first has the advantage of using linear design techniques and results in a time invariant system. The second method changes the sampling frequency and leads to a time variant system that demands a difficult analysis of stability. The proposed algorithms were tested using the methods of truncation of the number of samples and the method of changing the sampling rate of the system to compensate possible frequency variations of the grid. Experimental results are presented to validate the proposal.

DESIGN, MODELING, AND FABRICATION OF MICROROBOT LEGS

This dissertation presents work done in the design, modeling, and fabrication of magnetically actuated microrobot legs. Novel fabrication processes for manufacturing multi-material compliant mechanisms have been used to fabricate effective legged robots at both the meso and micro scales, where the meso scale refers to the transition between macro and micro scales. This work discusses the development of a novel mesoscale manufacturing process, Laser Cut Elastomer Refill (LaCER), for prototyping millimeter-scale multi-material compliant mechanisms with elastomer hinges. Additionally discussed is an extension of previous work on the development of a microscale manufacturing process for fabricating micrometer-sale multi-material compliant mechanisms with elastomer hinges, with the added contribution of a method for incorporating magnetic materials for mechanism actuation using externally applied fields. As both of the fabrication processes outlined make significant use of highly compliant elastomer hinges, a fast, accurate modeling method for these hinges was desired for mechanism characterization and design. An analytical model was developed for this purpose, making use of the pseudo rigid-body (PRB) model and extending its utility to hinges with significant stretch component, such as those fabricated from elastomer materials. This model includes 3 springs with stiffnesses relating to material stiffness and hinge geometry, with additional correction factors for aspects particular to common multi-material hinge geometry. This model has been verified against a finite element analysis model (FEA), which in turn was matched to experimental data on mesoscale hinges manufactured using LaCER. These modeling methods have additionally been verified against experimental data from microscale hinges manufactured using the Si/elastomer/magnetics MEMS process. The development of several mechanisms is also discussed: including a mesoscale LaCER-fabricated hexapedal millirobot capable of walking at 2.4 body lengths per second; prototyped mesoscale LaCER-fabricated underactuated legs with asymmetrical features for improved performance; 1 centimeter cubed LaCER-fabricated magnetically-actuated hexapods which use the best-performing underactuated leg design to locomote at up to 10.6 body lengths per second; five microfabricated magnetically actuated single-hinge mechanisms; a 14-hinge, 11-link microfabricated gripper mechanism; a microfabricated robot leg mechansim demonstrated clearing a step height of 100 micrometers; and a 4 mm x 4 mm x 5 mm, 25 mg microfabricated magnetically-actuated hexapod, demonstrated walking at up to 2.25 body lengths per second.

Síntese de ligantes Bis-amida e aplicação em reações de acoplamento Suzuki

As amidas constituem uma classe de moléculas com amplo perfil farmacológico e que despertam atenção também pela capacidade de coordenar metais de transição. Esta proposta de trabalho compreende, inicialmente, a síntese de 3 ligantes bis-amidas simétricas tendo como reagentes de partida etilenodiamina, orto-fenilenodiamina, salicilato de metila e cloreto de benzoíla. Esses compostos foram caracterizados por espectroscopia no infravermelho (IV), ressonância magnética nuclear de hidrogênio (RMN 1H) e difração de raios X em monocristal (DRX). Após sintetizar e caracterizar esses compostos, a outra etapa do trabalho foi a utilização dessas bis-amidas como ligante na reação catalítica de acoplamento Suzuki. O sistema catalítico otimizado à base destes ligantes na presença de paládio, foi capaz de promover a formação de bifenilas com rendimentos superiores a 90% à temperatura de 50 °C e tempo reacional de 1 h. Este sistema se mostrou eficiente para reagentes com diversos grupos substituintes (eletroretiradores e eletrodoadores) nos anéis aromáticos dos haletos de arila e ácidos arilborônicos.

Bull's eye leaky wave antenna for terrestrial and space applications

This work presents the study of Bull's eye antenna designs, a type of leaky wave antenna (LWA), operating in the 60 GHz band. This band emerged as a new standard for specific terrestrial and space applications because the radio spectrumbecomes more congested up to the millimetre-wave band, starting at 30 GHz. Built on existing Bull's eye antenna designs, novel structures were simulated, fabricated and measured, so as to provide more exibility in the implementation of wireless solutions at this frequency. Firstly, the study of a 60 GHz Bull's eye antenna for straightforward integration onto a CubeSat is presented. An investigation of the design is carried out, from the description of the radiation mechanism supported by simulation results, to the radiation pattern measurement of a prototype which provides a gain of 19.1 dBi at boresight. Another design, based on a modified feed structure, uses a microstrip to waveguide transition to provide easier and inexpensive integration of a Bull's eye antenna onto a planar circuit. Secondly, the design of Bull's eye antennas capable of creating beam deflection and multi-beam is presented. In particular, a detail study of the deflection mechanism is proposed, followed by the demonstration of a Bull's eye antenna generating two separate beams at ±16° away from the boresight. In addition, a novel mechanically steerable Bull's eye antenna, based on the division of the corrugated area in paired sectors is presented. A prototype was fabricated and measured. It generated double beams at ±8° and ±15° from the boresight, and a single boresight beam. Thirdly, a Bull's eye antenna capable of generating two simultaneous orbital angular momentum (OAM) modes l = 3 is proposed. The design is based on a circular travelling wave resonator and would allow channel capacity increase through OAM multiplexing. An improved design based on two stacked OAM Bull's eye antennas capable of producing four orthogonal OAM modes l = (±3,±13) simultaneously is presented. A novel receiving scheme based on discretely sampled partial aperture receivers (DSPAR) is then introduced. This solution could provide a lower windage and a lower cost of implementation than current whole or partial continuous aperture.

Degenerate Gases of Strontium for Studies of Quantum Magnetism

We describe the construction and characterization of a new apparatus that can produce degenerate quantum gases of strontium. The realization of degenerate gases is an important first step toward future studies of quantum magnetism. Three of the four stable isotopes of strontium have been cooled into the degenerate regime. The experiment can make nearly pure Bose-Einstein condensates containing approximately 1x10^4 atoms, for strontium-86, and approximately 4x10^5 atoms, for strontium-84. We have also created degenerate Fermi gases of strontium-87 with a reduced temperature, T/T_F of approximately 0.2. The apparatus will be able to produce Bose-Einstein condensates of strontium-88 with straightforward modifications. We also report the first experimental and theoretical results from the strontium project. We have developed a technique to accelerate the continuous loading of strontium atoms into a magnetic trap. By applying a laser addressing the 3P1 to 3S1 transition in our magneto-optical trap, the rate at which atoms populate the magnetically-trapped 3P2 state can be increased by up to 65%. Quantum degenerate gases of atoms in the metastable 3P0 and 3P2 states are a promising platform for quantum simulation of systems with long-range interactions. We have performed an initial numerical study of a method to transfer the ground state degenerate gases that we can currently produce into one of the metastable states via a three-photon transition. Numerical simulations of the Optical Bloch equations governing the three-photon transition indicate that >90% of a ground state degenerate gas can be transferred into a metastable state.