Obtenção de Propriedades Físico-Químicas de Misturas de Hidrocarbonetos em Baixa e Alta Pressão Visando a Caracterização e a Modelagem

The composition of petroleum may change from well to well and its resulting characteristics influence significantly the refine products. Therefore, it is important to characterize the oil in order to know its properties and send it adequately for processing. Since petroleum is a multicomponent mixture, the use of synthetic mixtures that are representative of oil fractions provides a better understand of the real mixture behavior. One way for characterization is usually obtained through correlation of physico-chemical properties of easy measurement, such as density, specific gravity, viscosity, and refractive index. In this work new measurements were obtained for density, specific gravity, viscosity, and refractive index of the following binary mixtures: n-heptane + hexadecane, cyclohexane + hexadecane, and benzene + hexadecane. These measurements were accomplished at low pressure and temperatures in the range 288.15 K to 310.95 K. These data were applied in the development of a new method of oil characterization. Furthermore, a series of measurements of density at high pressure and temperature of the binary mixture cyclohexane + n-hexadecane were performed. The ranges of pressure and temperature were 6.895 to 62.053 MPa and 318.15 to 413.15 K, respectively. Based on these experimental data of compressed liquid mixtures, a thermodynamic modeling was proposed using the Peng-Robinson equation of state (EOS). The EOS was modified with scaling of volume and a relatively reduced number of parameters were employed. The results were satisfactory demonstrating accuracy not only for density data, but also for isobaric thermal expansion and isothermal compressibility coefficients. This thesis aims to contribute in a scientific manner to the technological problem of refining heavy fractions of oil. This problem was treated in two steps, i.e., characterization and search of the processes that can produce streams with economical interest, such as solvent extraction at high pressure and temperature. In order to determine phase equilibrium data in these conditions, conceptual projects of two new experimental apparatus were developed. These devices consist of cells of variable volume together with a analytical static device. Therefore, this thesis contributed with the subject of characterization of hydrocarbons mixtures and with development of equilibrium cells operating at high pressure and temperature. These contributions are focused on the technological problem of refining heavy oil fractions

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Desenvolvimento de sorvete probiótico a base de leite de cabra: estudo da formulação, características físico químicas, sensoriais e viabilidade das bactérias probióticas

This work targetet the caprine ice cream production added with probiotic bacteria Bifidobacterium animalis subsp. lactis. It is divided into two parts. In the first one, four caprine ice cream formulations were evaluated, in which it was used hydrogenated fat (F1 and F3) or fat substitute (F2 and F4) in two different flavors (F1 and F2, passion fruit, F3 and F4, guava). Statistical differences (p<0.05) were detected for their physical-chemical properties, mainly for total solids and fat, but no differences were observed for melting test results. When it went to sensory acceptance, all four ice cream formulations reached high acceptance indexes, mostly formulation F4, which was selected for further studies. In the second part, F4 formulation was prepared with the addition of probiotic bacteria Bifidobacterium animalis subsp. lactis. The growth kinetics was studied and it was observed that the cellular concentration peak was reached after four fermentation hours (10.14 log UFC/g). This time was selected for pre-fermentation procedure and posterior addition at ice cream syrup. In this part of the study, two experimental groups were evaluated: group G1, in which the probiotic addition occurred before the maturation step and group G2, which included a pre-fermentation step and probiotic addition after ice cream maturation. The physical-chemical properties of these two ice cream groups were similar, except for pH, which was higher for group G2 (p<0.05). G1 samples had superior melting rate (3.566 mL/min) and both groups presented microbiological and sanitary results in accordance to current Brazilian legislation. Also, G1 and G2 were considered sensory accepted due to their acceptance indexes higher than 70%. G1 and G2 sensory profiles were similar (p>0.05), and both ice cream samples exhibited high creaminess (6.76 to 6.91) and mouth melting sensation (6.53 to 6.67) scores, while low sandiness scores (0.85 to 0.86) were observed, positive characteristics for this kind of food product. During the first 24 hours after ice cream production, the population of B. animalis subsp. lactis decreased, reaching 7.15 e 6.92 log CFU/g for G1 and G2, respectively. Probiotic bacteria counts fluctuated in ice cream samples during the first 108 days at frozen storage, especially for G2 group. Decreased probiotic viability was observed for G1 samples during the first 35 days of frozen storage, mild variation between 35 and 63 days and stabilized counts were observed after this time. After 21 days at frozen storage, ice cream samples of G1 and G2 groups reached 1.2 x 109 and 1.3 x 109 CFU/portion, respectively. After 108 days under these storage conditions, the survival rate of B. animalis subsp. lactis was 94.26% and 81.10% for G1 and G2 samples, respectively. After simulation of gastroenteric conditions, G2 group reached 9.72 x 105 CFU/portion. Considering the current requirements of Brazilian legislation, which stipulates that functional foods must have minimum probiotic count between 108 and 109 CFU/portion and detectable probiotic bacteria after being submitted to gastroenteric conditions, it is concluded that the ice cream with the addition of Bifidobacterium animalis subsp. lactis made as shown in this work, can be considered as a dairy functional food

Produção de forragem verde em sistema hidropônico usando esgoto tratado

In the urban areas of the cities a larger problem of destiny of effluents of the treatment stations is verified due to the junction of the sewages in great volumes. This way the hidroponic cultive becomes important, for your intensive characteristic, as alternative of reuse. This work presents as objective the improvement of the relation hidric-nutritious of the hidroponic cultive of green forage (FVH) using treaty sewage. The production of forage was with corn (Zea mays L.), using double hybrid AG1051, in the experimental field of the Federal University of Rio Grande do Norte (UFRN), in the city of Natal-RN-Brazil. The treated effluent essentially domestic had origin of anaerobic reactor, type decant-digester of two cameras in series followed by anaerobic filters drowned. The hidroponic experimental system was composed of 08 stonemasons, with limited contours for masonry of drained ceramic brick, measuring each one 2,5 meters in length for 1,0 meter of width, with inclination of 4% (m/m) in the longitudinal sense, leveled carefully, in way to not to allow preferential roads in the flow. These dimensions, the useful area of Isow was of 2 square meters. The stonemasons of cultive were waterproof (found and lateral) with plastic canvas of 200 micres of thickness, in the white color. Controlled the entrance and exit of the effluente in the stonemasons, with cycles of 12,68 minutes, it being water of 1,18 minutes. The treatments were constituted of: T1 - 24 hours/day under it waters with flow of 2 L/min; T2 - 12 hours/day under waters with flow of 4 L/min; T3 - 12 hours/day under waters with flow of 2 L/min; and T4 - 16 hours/day under waters with flow of 3 L/min. There were evaluations of the evapotranspirometric demand, of hidroponic system affluent and effluent seeking to characterize and to monitor physical-chemical parameters as: pH, temperature, Electric Conductivity and Fecal Coliforms. This last one was analyzed to the 11 days after isow (DAS) and to the 14 DAS. The others were analyzed daily. I sow it was accomplished in the dates of February 21, 2007, first experiment, and April 10, 2007, second experiment. The density of Isow was of 2 kg of seeds, germinated before 48 hours, for square meter of stonemason. The statistic delineament was it casual entirely with two repetitions, in two experiments. It was applied Tukey test of average to five percent of probability. The cultivation cycle was of 14 DAS with evapotranspirometric demand maximum, reached by T1, of 67,44 mm/day. The analyzed parameters, as mass of green matter - Kg, productivity-Kg/m2 and reason of production of seed FVH/Kg used in Isow, the best result was presented by T1, obtaining value of up to 19,01 Kg/m2 of cultive. Without significant difference, the T4 presented greats values with 16 hours under cycle of water. The Treatments 2 and 3 with 12 hours under cycle of water, they obtained inferior results to the other Treatments. As treatment system, came efficient in the reduction of the salinity. T1 obtained reduction medium maxim of 62,5%, to the 7 DAS, in the amount of salts that enter in the system in they are absorbed in the cultivation. The cultivation FVH acted reducing the microbiologic load. Significant percentile of reduction they were reached, with up to 90,23% of reduction of Units of Colonies (UFC), constituting, like this, the Hidroponic System as good alternative of treatment of effluents of Reactors of high Efficiency

Efeitos do esteróide anabólico nandrolona sobre o músculo sóleo de ratos submetidos a treinamento físico através de natação: estudo histológico, histoquímico e morfométrico

Este estudo teve por objetivo analisar as alterações histológicas, histoquímicas e morfométricas das fibras do músculo sóleo de ratos submetidos a um programa de natação, associado ou não à administração do esteróide anabólico decanoato de nandrolona. Foram utilizados 22 ratos Wistar machos, 12 dos quais receberam injeção intramuscular do esteróide (5mg/kg) e 10, óleo mineral (5mg/kg), duas vezes por semana. Os animais foram submetidos a 42 sessões de natação por nove semanas (de segunda a sexta-feira), com aumento progressivo de carga por meio do tempo de natação. Após o sacrifício, o músculo sóleo esquerdo foi retirado, imerso em n-hexana e acondicionado em nitrogênio líquido. Cortes do terço médio desse músculo foram feitos em micrótomo criostato (-20ºC) e corados pela técnica HE e pelo método histoquímico NADH-TR. Os animais submetidos a treinamento físico e a esteróide (TA) ou óleo mineral (TO) apresentaram fibras musculares com maior diâmetro, quando comparados com os animais-controle (NTA e NTO). Não houve diferença significativa entre as medidas das médias dos diâmetros das fibras dos grupos NTA e NTO e entre TA e TO. Nos grupos TA e NTA notou-se acentuado processo de fagocitose, arredondamento e hialinização das fibras musculares. Já nos grupos TA, TO e NTA observou-se perda da atividade enzimática oxidativa. Os resultados sugerem que a natação produz hipertrofia muscular de forma semelhante, tanto no grupo que recebeu esteróide como no que recebeu óleo mineral. No entanto, o grupo que recebeu esteróide apresentou sinais claros de maior degeneração muscular.

Controles físico, físico-químico, químico e microbiológico dos frutos de Dimorphandra mollis Benth., Fabaceae

Considerando-se a qualidade dos fitoterápicos, é importante salientar que a preocupação com esta questão inclui rigoroso acompanhamento das diferentes etapas de desenvolvimento e produção, desde a coleta do vegetal até o produto final. O controle de qualidade de drogas vegetais e seus extratos é essencial quando utilizados como matéria-prima para o desenvolvimento de fitoterápicos. Neste trabalho foram utilizadas diversas técnicas (farmacopeicas e não farmacopeicas) visando estabelecer parâmetros de qualidade dos frutos de Dimorphandra mollis Benth. (Leguminosae), popularmente conhecida como faveiro. Os resultados obtidos determinaram as características físico-químicas da droga vegetal e mostraram que o pó dos frutos e o extrato etanólico 70% de D. mollis apresentam um teor de flavonóides de 10,25% e 17,21%, respectivamente. A análise fitoquímica preliminar dos frutos caracterizou a presença de taninos, saponinas e flavonóides. Na análise microbiológica do extrato não houve crescimento de patógenos entre os testes realizados.

Parâmetros físico-químicos de estrelas nos campos de exoplanetas do satélite corot

A rotação estelar é um dos mais importantes observáveis da evolução estelar. Neste sentido, o satélite CoRoT representa uma oportunidade única de medir os períodos rotacionais para uma amostra de estrelas estatisticamente robusta, oferecendo dados absolutamente necessários para o estudo da rotação e seu papel na evolução estelar. Para conseguir isto, um passo fundamental é a caracterização física e química das estrelas observadas pelo CoRoT, especificamente devido ao fato de que o cálculo de períodos rotacionais confiáveis é um trabalho difícil sem a ajuda dos parâmetros estelares. Desta forma, foi elaborado um importante seguimento observacional das estrelas nos campos do CoRoT do anticentro LRa01 e do centro LRc01, permitindo a correta identificação dos períodos que reflitam a modulação rotacional. Nesta tese de doutorado são apresentados os resultados de tal seguimento. Parâmetros físicos e químicos, tais como temperatura efetiva Teff , gravidade superficial log(g), velocidade de microturbulência Vmic, abundância de ferro [Fe/H], velocidade de rotação projetada Vsin(i), e abundância de lítio A(Li) são apresentados para uma amostra de 116 estrelas dos campos CoRoT. Elas se encontram em diferentes estágios evolutivos, desde a sequência principal (SP) até o ramo das gigantes vermelhas (GV). As observações foram feitas utilizando os espectrógrafos UVES (VLT) e HYDRA (CTIO). Para a derivação de tais parâmetros foram utilizados o programa TurboSpectrum e os modelos de atmosfera de MARCS. Paralelamente, velocidades rotacionais Vsin(i) foram obtidas a partir do ajuste dos perfis observados e sintéticos das linhas de ferro e por meio de uma calibração de função de correlação cruzada (CCF). Períodos rotacionais Prot para 77 estrelas da amostra foram obtidos a partir das curvas de luz do satélite CoRoT. Extensas tabelas destes parâmetros e seus respectivos erros são apresentadas. Foram encontradas diferenças nas distribuições de Teff , [Fe/H] e estágios evolutivos entre os diferentes campos do CoRoT, indicando possíveis efeitos de seleção na amostra, assim como a existência de diferentes populações estelares do disco Galáctico. Por outro lado, o comportamento rotacional e as abundâncias de lítio não apresentam diferenças entre estrelas de parâmetros físicos similares, mas que pertencem a diferentes campos do CoRoT. A partir da análise de temperaturas, foi encontrada uma maior extinção por avermelhamento para estrelas do CoRoT localizadas no campo LRc01, assim como um gradiente deste valor em função da distância. Os resultados mostram que as abundâncias de lítio, as velocidades de rotação e os períodos rotacionais apresentam o mesmo comportamento descrito na literatura. Por outro lado, é apresentada pela primeira vez a relação que existe entre o lítio e o período de rotação em diferentes estágios evolutivos, mostrando, tal como era esperado, que ambas as grandezas possuem uma anticorrelação. Também é apresentada a evolução simultânea da rotação e do lítio, e foram calculadas relações que permitem obter valores médios de A(Li) como função da temperatura efetiva e do período rotacional. Os dados apresentados nesta tese de doutorado representam um importante ponto de partida para serem utilizados como uma amostra de calibração para diferentes programas no contexto da missão do satélite CoRoT, uma vez que a lista de estrelas aqui analisadas são parte das mais brilhantes que compõem o campo Exo do CoRoT

Exercício físico de baixa intensidade na dpoc: comparação dos programas solo e aquático

Physical Exercise (PE) is a necessary component in the management in COPD patients, where respiratory symptoms are associated with reduced functional capacity. Even with the increase in the number of studies that have been published and the therapeutics success using aquatic therapy approach, studies using PE in water in COPD patients are so few. Objective: the aim of this present study was to analyze the effects of low intensity water exercise in COPD patients, developed in two different places aquatic and ground. Methods: This is a randomized clinical trial study, 42 patients with moderate to very severe DPOC were recruited for the study, mean age of 63,2  10,9 years old. Randomized in 3 groups: Control Group (CG), Land Group (LG) and Water Group (WG). The PE protocol was performed in a period of 8 weeks, with frequency of 3 times per week. The CG participated in an educational program. All the patients were assessed twice through spirometry, respiratory muscular strength, the 6-min walk test, the quality of life (SF-36 and SGRQ), the LCADL, the MRC, the BODE index and the upper limbs (UP) incremental test. Results: There was a significant difference after the approaches in DP6 from the WG (p=0,02); in VEF1 in LG (p=0,00) and WG (p=0,01); in MIP in LG (p=0,01) and WG (p=0,02); in MEP in LG (p=0,02) and WG (p=0,01); the MRC decreases in WG (p=0,00). there was an increase of the weight supported by the UP in LG (p=0,00) and WG (p=0,01). The LG showed an increase of the quality of life represented by the SGRQ total score (p=0,00). The BODE index decreased in LG (p=0,00) and WG (p=0,01). In LCDAL, the LG showed a decrease. Conclusion: This data in this present study suggest that both approaches of low intensity exercise showed to be beneficial in moderate to very severe COPD patients. The WG showed additional benefits in physical function, pointing to a new therapeutic modality for COPD patients

Fadiga no trabalho: como o psicólogo pode atuar?

As más condições laborais e a forma de organização do trabalho dentro do sistema capitalista frequentemente têm se mostrado nocivas para o trabalhador. Além disso, a chamada síndrome da fadiga crônica é um dos males que acomete a classe trabalhadora. Por meio de revisão teórica buscou-se caracterizar a síndrome, suas possíveis causas e consequências e o papel do psicólogo nas organizações. A fadiga pode ser compreendida como um esgotamento físico e mental, culminando em consequências para a saúde do trabalhador. Excesso de trabalho, pressão por produção, turnos alternados, riscos físicos e falta de autonomia são alguns fatores apontados como prováveis desencadeadores da síndrome, e as consequências encontradas vão desde baixo rendimento e maior risco de acidentes de trabalho até dificuldade para relaxar em momentos de lazer. É papel do psicólogo do trabalho e organizacional realizar ações remediadoras e preventivas que impeçam ou dificultem o aparecimento da fadiga no trabalho.

Saúde psíquica e condições de trabalho dos profissionais de saúde nos hospitais da Universidade Federal do Rio Grande do Norte

A tese se propôs a avaliar a relação entre saúde psíquica e condições de trabalho em dois hospitais da Universidade Federal do Rio Grande do Norte, a saber: Hospital Universitário Onofre Lopes e Hospital Universitário Ana Bezerra. Adotou como ponto de partida epistemológico a abordagem psicossociológica, considerando que a compreensão sócio-histórica do contexto é indispensável para entender os fenômenos em análise. As condições de trabalho e a saúde psíquica foram abordadas interdisciplinarmente, fundamentando a construção de um modelo compreensivo de saúde psíquica que orientou a investigação. O caminho metodológico utilizado foi a pesquisação. Essa foi desenvolvida, utilizando técnicas como análise documental, observação participante, entrevistas não estruturadas, grupo focal e aplicação de um protocolo de pesquisa composto pelo questionário de condições de trabalho, pelo Questionário de Saúde Geral (QSG-60), pela Escala de Bem-Estar Afetivo no Trabalho (JAWS-12) e por questões sociodemográficas. A análise dos resultados mostrou que os escores sintomáticos de saúde psíquica variam por hospitais e que a saúde psíquica sofre influência das condições de trabalho, sobretudo em aspectos referentes a três dimensões: condições físicas e materiais; processos e características do trabalho e o ambiente sociogerencial. Em referência à primeira dessas dimensões, destacaram-se a exposição aos riscos psicobiológicos e de acidentes, bem como as exigências de esforço físico. Na segunda dimensão, a complexidade das atividades e a responsabilidade implicada nas mesmas. E, na última, os fatores de organização da atividade, violência e ambiente conflitivo. Como a relação do indivíduo com seu contexto é dialética, os resultados encontrados corroboraram que quanto mais as condições de trabalho são desfavoráveis, maior a afetação da saúde psíquica e dos afetos com relação ao trabalho, repercutindo novamente no ambiente de trabalho. Portanto, ações de melhoria das condições de trabalho precisam ser estabelecidas para resultar, no efeito inverso, proporcionando o aumento dos afetos positivos e a redução dos sintomas psíquicos

Infância na publicidade: um estudo sobre o trabalho de crianças na publicidade na cidade de Natal-RN

In Brazilian scene the child labor is a serious and relevant theme regarding issues that involve infancy, arousing the interest and concerning of public and private institutions, and organized civil society. Thus, the child labor is forbidden by the law, considered that the child worker have a distinguished life experience, especially because it is demanded them the early mature of some skill, generating implications on their physical, emotional, cognitive, social and psychological development. Observing those issues, we proposed think the child labor, over and above those considered the worst forms of one and more found in literature, what lead us to think the child labor in the advertising. In that way, this research aimed to investigate the insertion and development conditions of children who work in advertisements, and the possible effects on their lives in the face of that insertion. Participated of this study: three advertising agencies, six video producers companies, one child model s agent and five children with their respective families. Those children were four boys and two girls, with ages between seven and eleven years old, which one that have accomplished four or more advertisements, in Natal city, Rio Grande do Norte. Based on social-historical perspective, we used the semi-structured interview as methodological instrument, which underlays the comprehension of the data obtained in field research processes. This study revealed that when children are inserted in the advertising activities they are submitted to irregular and adverse work situations, what occurs in others productive activities mentioned in the literature. The data still exposed that the family is the main responsible to the children insertion in the advertisement work; moreover, there is an ambiguousness of wishes in relation of that activity. On the other hand, we realized that the legal content concerning to the child labor forbidding, carries contradictory aspects in face of the ECA s 149 article, that one, under some conditions, allows that a child take part in the activities of advertising context. This highlights the necessity of a rigorous evaluation of the children insertion in the advertising, in order to ensure the whole children and adolescents protection. This study put in evidence the complexity that involves the child labor in this context, mainly, due to the exposition and manipulation of the childish image on the media. Besides, we understand that the discussion on this subject should be stimulated and, therefore, enlarged this on over and above those considered the worst forms of child labor

Agente penitenciário: trabalho no cárcere

Behind the high walls of a prison, there is suffering! Suffering from those who atone to their punishment, from those who work on behalf of an alleged regeneration, suffering that has remained for over two centuries. For those who had their conducts characterized as a crime, many studies have been developed. On the other hand, little is known about the prison servants. This research focused mainly on the identification, from the perspective of the correctional officers from two prisons in different states of Brazil, of the negative influence that their jobs have on them, on the factors that serve as protection, as well as the ones that offer them risk. It was observed that hygiene and security conditions are precarious in both prisons. From the reports, scabies, tuberculosis, hepatitis, H1N1, constant violence, politicization of the working environment, doubled working hours, lack of career planning and salaries emerge as evidence of the place where the bodies who work there are subdued, not taking the differences into account. From the above, and as of the many things that still need to be said about this category, it is reiterated the importance in developing studies about the conditions and the work organization and its implications on the mental health of those workers, who lack of public policies committed to their working realities

Esquemas alternativos para o passo de parametrização do método da continuação baseados em parâmetros físicos

O método de fluxo de carga convencional é considerado inadequado para se obter o ponto de máximo carregamento (PMC) de sistemas de potência, devido à singularidade da matriz Jacobiana neste ponto. Os métodos da continuação são ferramentas eficientes para a solução deste tipo de problema, visto que técnicas de parametrização podem ser utilizadas para evitar a singularidade da matriz Jacobiana. Neste trabalho, novas opções para a etapa de parametrização do método da continuação são apresentadas. Mostra-se que variáveis com claro significado físico podem ser utilizadas na etapa de parametrização. As seguintes variáveis foram testadas: perda total de potência ativa e reativa, potência ativa e reativa na barra de referência, potência reativa das barras de geração, e as perdas de potência ativa e reativa nas linhas de transmissão (LT). Além de facilitar a implementação computacional do método de continuação, as técnicas de parametrização apresentadas simplificam a definição matemática e o entendimento do método por parte de engenheiros de potência, visto que os métodos de continuação existentes na literatura sempre utilizam técnicas de parametrização complexas, e de interpretação puramente geométrica. Resultados obtidos com a nova metodologia para os sistemas testes do IEEE (14, 30, 57 e 118 barras) mostram que as características de convergência do método de fluxo de carga convencional são melhoradas na região do PMC. Além disso, durante o traçado das curvas PV, as diversas técnicas de parametrização podem ser comutadas entre si possibilitando o cálculo de todos os pontos da curva com um número reduzido de iterações. Diversos testes são realizados para proporcionar a comparação do desempenho dos esquemas de parametrização propostos.

Técnicas de parametrização global para o fluxo de carga continuado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Técnica de parametrização geométrica para o fluxo de carga continuado baseado nas variáveis tensão nodal e fator de carregamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)