Effect of environmental factors on the abundance of decapod crustaceans from soft bottoms off southeastern Brazil

Este estudo investigou a importância dos fatores ambientais sobre os padrões de abundância dos decápodos na costa sudeste brasileira. Amostragens foram feitas mensalmente de janeiro/1998 a dezembro/1999 em Ubatumirim e Mar Virado, região de Ubatuba, usando um barco de pesca camaroneiro equipado com redes doublerig. Foram selecionadas seis áreas adjacentes aos costões rochosos. Amostras de água de fundo foram coletadas usando garrafa de Nansen, para mensurar a temperatura e salinidade. Amostras de sedimento foram obtidas utilizando pegador de Van Veen, para determinação da textura e conteúdo de matéria orgânica. A associação dos fatores ambientais com a abundância das espécies foi verificada através da Análise de Correspondência Canônica (α = 0,05). Quarenta e uma espécies de Decapoda foram utilizadas na análise multivariada. A análise indicou que a textura do sedimento (phi) e a temperatura foram os fatores mais fortemente correlacionados (p < 0,05) com a abundância espacial e temporal das espécies. Considerando a região de estudo como zona de transição faunística, incluindo espécies de origem tropical e subantártica, as espécies responderam diferentemente aos fatores ambientais, principalmente à temperatura. Possivelmente os decápodos ajustem sua distribuição de acordo com suas limitações fisiológicas intrínsecas, como resultado dos recursos disponíveis.

Adoção de práticas ambientais operacionais e do desempenho ambiental: survey com empresas Brasileiras certificadas com ISO 9001

Pós-graduação em Engenharia de Produção - FEB

Longitudinal patterns of fish assemblages in mountain streams from tropical forest biome

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temperature and storage period over spermatic parameters of jundia, Rhamdia quelen (Quoy & Gaimard, 1824)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Qualidade do manejo no frigorífico: efeitos no bem-estar animal e na qualidade da carcaça e da carne

Pós-graduação em Zootecnia - FCAV

Equilíbrio funcional em indivíduos com doença de Parkinson e sua relação com a qualidade de vida

Introduction: Parkinson’s Disease (PD) is characterized by a set of four motor symptoms: tremor, rigidity, bradykinesia and postural instability. These defi cits may predispose individuals to limitations resulting from falls and their secondary consequences. Objective: To evaluate the functional balance and quality of life (QoL) in individuals with PD and determine whether there is correlation between performance on tests of balance with the QoL. Method: The project was referred to the Ethics Committee in Research of Universidade Estadual Paulista “Julio de Mesquita Filho” Campus de Marília and was approved under protocol number 1806/09. Participated in this study with individuals diagnosed with PD between levels one and four in the Hoen and Yahr scale. The subjects were evaluated according to functional balance and QoL, respectively by the instruments: Functional Balance Scale Berg (EEFB), Time Up and Go test (TUG), and Parkinson’s Disease Questionnaire-39 (PDQ-39). To perform the statistical analysis used the GraphPad Prism 5. To perform the correlation analysis for the variables passed normality by the Shapiro-Wilk. Since the variables were non-parametric test was used Spearman. During the analysis the statistical signifi cance level was considered p ≤ 0, 05. Results: We studied 25 individuals aged between 54 and 85 years (71.20 ± 8.50), time of diagnosis between one and 39 years (6.54 ± 7.71) disease. Moderate correlation was found between the EEFB with QoL (r =- 0.6), and TUG with QoL (r = 0.6836). Among the aspects of QoL balance showed a higher correlation with the domains “mobility” (TUG r = 0, 6768; EEFB r = -0.6155) and “Activities of daily living” (TUG r = 0, 7357, and EEFB r = -0.6521). Conclusion: Patients with Parkinson’s disease show defi cits in balance and QoL. The balance disorders have a high correlation among themselves and show how aspects of QoL.

Dissimilaridade ambiental em variedades de milho cultivadas em diferentes densidades populacionais

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Investigation of DMSO-Induced Conformational Transitions in Human Serum Albumin Using Two-Dimensional Raman Optical Activity Spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physiological and production response of dairy goats bred in a tropical climate

The aim of this work was to determine the adaptability of Saanen and A1/2Saanen x A1/2Anglo-Nubian (A1/2SA1/2AN) goats bred in tropical climates. The study included 30 goats, 15 Saanen and 15 A1/2SA1/2AN. The data was collected during the rainy and dry seasons. During the whole experimental period, the environment variables were recorded, as well as rectal temperature (RT), superficial temperature (ST), respiratory rate (RR) and heart rate (HR) and milk production (MP). The adaptability coefficient (AC) was calculated for both genotypes. The averages were evaluated by ANOVA at 5 % probability. There was a genotype and period of year effect, as well as the interaction genotype x period of year. Pearson's simple correlation analysis was then carried out between milk production and physiological and environment variables. There was a statistical difference (p < 0.05) between the seasons for RT, ST and RR. RT, RR and HR were lower for A1/2SA1/2AN than Saanen goats, regardless of the season. MP was greater in the dry season (p < 0.05) (2.52 A +/- 0.50 kg/day for A1/2SA1/2AN and 2.41 A +/- 0.38 kg/day for Saanen) than the rainy season (2.17 A +/- 0.27 kg/day for A1/2SA1/2AN and 2.28 A +/- 0.53 kg/day for Saanen). The MP correlations were very significant (p < 0.05), however low and negative, where it was higher when correlated with RR in Saanen goats. Under the conditions of the present study, it is concluded that the goats were influenced by climatic factors, where the rainy period was more likely to cause thermal stress in the animals.

Influence of Abiotic Factors and Floral Resource Availability on Daily Foraging Activity of Bees

In this study, the daily and seasonal influences of abiotic factors and the amount of floral resources on the foraging frequency of bees were determined. The experiments were performed, during 12 consecutive months, in the main floral sources used by bees in a secondary forest fragment. The foraging frequency of each bee species on flowers of each plant was recorded for 20-min periods, every hour. To verify whether the foraging activity is influenced by abiotic factors, Pearson's correlation analysis and linear regression tests were performed for the dominant bee species. Temperature and luminosity were the two main abiotic factors regulating foraging activities of bees. A positive correlation was found between the foraging frequency of most bees and these two variables. Conversely, the foraging activity was influenced neither by the relative humidity nor by the wind speed. The activity of each species depends on a combination of factors that include not only abiotic variables, but also the amount of floral resources available during the day, body size, and behavior of each visitor. After a certain period of the day, the scarcity of floral resources produced by most plants can stimulate the bees to forage in the flowers early in subsequent days, which may occur before the period in which the abiotic conditions are really favorable.

EVALUATION OF ROUGHNESS, WETTABILITY, AND MORPHOLOGY OF AN YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTAL CERAMIC AFTER DIFFERENT AIRBORNE-PARTICLE ABRASION PROTOCOL

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Proinflammatory Cytokines Correlate with Depression and Anxiety in Colorectal Cancer Patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento da condutividade hidráulica da cobertura do aquífero Guarani, situado na bacia hidrográfica dos rios Jacaré-Guaçú e Jacaré-Pepira, na porção centro-norte do estado de São Paulo

Given the importance of preserving the water quality of the Guarani Aquifer, the work done in the hydrographic basin of the rivers Jacaré-Guaçú e Jacaré-Pepira, located in the central-northern São Paulo state, was made to map the hydraulic conductivity from the use of some empirical methods associated with granulometric analysis and in situ testing, specifically with the Guelph permeameter. All results were submitted to a correlation analysis and subsequently mapped using the methodology of minimum curvature, based on numerical techniques Spline. These procedures provide for studies of aquifer vulnerability and assist in decision making in environmental projects and guidelines for urban planning

Porphyromonas endodontalis in chronic periodontitis: a clinical and microbiological cross-sectional study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Air abrasion before and/or after zirconia sintering: surface characterization, flexural strength, and resin cement bond strength

The purpose of this in vitro study was to evaluate the effect of air-abrasion/zirconia sintering order on the yttria partially stabilized tetragonal zirconia polycrystal (Y-TZP) surface characterization (roughness, morphology, and phase transformation), flexural strength (FS), and shear bond strength (SBS) to a resin cement. Y-TZP specimens were air abraded with 50-μm Al2O3 particles after (AS), before (BS), or before and after zirconia sintering (BAS). For roughness (Ra), 30 block specimens (12×12×3.0 mm; n=10) had their surfaces analyzed by a profilometer. Next, on the air-abraded surfaces of these specimens, composite resin discs (n=30) were bonded with RelyX ARC. The bonded specimens were stored for 24 hours in distilled water at 37°C before shear testing. Failure mode was determined with a stereomicroscope (20×). The surface morphology (n=2) was evaluated by SEM (500×). For the four-point flexural strength test (EMIC DL2000), 39 bar-shaped specimens (20×4.0×1.2 mm; n=13) were air abraded according to the three conditions proposed, and an additional group (nonabraded) was evaluated (n=13). The quantitative analysis of phase transformation (n=1) was completed with Rietveld refinement with X-ray diffraction data. Ra (μm) and SBS (MPa) data were analyzed by one-way analysis of variance (ANOVA) and the Tukey test (α=0.05). Pearson correlation analysis was used to determine if there was a correlation between roughness and SBS. For FS (MPa) data, one-way ANOVA and the Dunnett C-test (α=0.05) were used. The air-abrasion/zirconia sintering order influenced significantly (p<0.001) Ra, SBS, and FS. The BS and AS groups presented the highest (1.3 μm) and the lowest (0.7 μm) Ra. The highest SBS (7.0 MPa) was exhibited by the BAS group, followed by the AS group (5.4 MPa) and finally by the BS group (2.6 MPa). All groups presented 100% adhesive failure. A weak correlation (r=−0.45, p<0.05) was found between roughness and SBS. The air-abrasion/zirconia sintering order provided differences in the surface morphology. The nonabraded (926.8 MPa) and BS (816.3 MPa) groups exhibited statistically similar FS values but lower values than the AS (1249.1 MPa) and BAS (1181.4 MPa) groups, with no significant difference between them. The nonabraded, AS, BS, and BAS groups exhibited, respectively, percentages of monoclinic phase of 0.0 wt%, 12.2 wt%, 0.0 wt%, and 8.6 wt%. The rougher surface provided by the air-abrasion before zirconia sintering may have impaired the bonding with the resin cement. The morphological patterns were consistent with the surface roughness. Considering the short-term SBS and FS, the BAS group exhibited the best performance. Air abrasion, regardless of its performance order, provides tetragonal to monoclinic transformation, while sintering tends to zero the monoclinic phase content.