Study of biomacromolecule conformational changes by Scanning Force Microscopy

L?objectif de ce travail de thèse est l?étude des changements conformationels des biomacromolecules à l?échelle d?une molécule unique. Pour cela on a utilisé la Microscopie à Force Atomique (AFM) appliqué à l?étude des protéines et des acides nucléiques déposés sur une surface. Dans ce type de microscopie, une pointe très fine attachée à l?extrémité d?un levier est balayée au dessus d?une surface. L?interaction de la pointe avec la surface de l?échantillon induit la déflection du levier et ce phénomène permet de reconstruire la topographie de l?échantillon. Très importante dans cette technique est la possibilité de travailler en liquide. Cela permet de étudier les biomolécules en conditions quasi-physiologiques sans qu?elles perdent leur activité. On a étudié GroEL, la chaperonin de E.coli, qui est un homo oligomère avec une structure à double anneau qui joue un rôle très important dans le repliement des protéines dénaturées et celles qui viennent d?être synthétisées. En particulier on a focalisé notre attention sur la stabilité mécanique et sur les changements conformationels qui ont lieu pendant l?activité de GroEL. Une analyse détaillée des changements dans la stabilité mécanique et des effets produits par la liaison et l?hydrolyse de l?ATP est présentée dans ce travail. On a montré que le point le plus faible dans la structure de GroEL est l?interface entre les deux anneaux et que l?étape critique dans l?affaiblissement de la structure est l?hydrolyse de l?ATP. En ce qui concerne le changement conformationel, le passage d?une surface hydrophobe à hydrophile, induit par l?hydrolyse de l?ATP, a été montré. Ensuite on a étudié le changement dans la conformation et dans la topologie de l?ADN résultant de l?interaction avec des molécules spécifiques et en réponse à l?exposition des cellules de E.coli à des conditions de stress. Le niveau de surenroulement est un paramètre très sensible, de façon variée, à tous ces facteurs. Les cellules qui ont crus à de températures plus élevées que leur température optimale ont la tendance à diminuer le nombre de surenroulements négatif pour augmenter la stabilité thermique de leur plasmides. L?interaction avec des agents intercalant induit une transition d?un surenroulement négatif à un surenroulement positif d?une façon dépendante de la température. Finalement, l?effet de l?interaction de l?ADN avec des surfaces différentes a été étudié et une application pratique sur les noeuds d?ADN est présentée.<br/><br/>The aim of the present thesis work is to study the conformational changes of biomacromolecules at the single molecule level. To that end, Atomic Force Microcopy (AFM) imaging was performed on proteins and nucleic acids adsorbed onto a surface. In this microcopy technique a very sharp tip attached at the end of a soft cantilever is scanned over a surface, the interaction of the tip with the sample?s surface will induce the deflection of the cantilever and thus it will make possible to reconstruct the topography. A very important feature of AFM is the possibility to operate in liquid, it means with the sample immersed in a buffer solution. This allows one to study biomolecules in quasi-physiological conditions without loosing their activity. We have studied GroEL, the chaperonin of E.coli, which is a double-ring homooligomer which pays a very important role in the refolding of unfolded and newly synthetized polypeptides. In particular we focus our attention on its mechanical stability and on the conformational change that it undergoes during its activity cycle. A detailed analysis of the change in mechanical stability and how it is affected by the binding and hydrolysis of nucleotides is presented. It has been shown that the weak point of the chaperonin complex is the interface between the two rings and that the critical step to weaken the structure is the hydrolysis of ATP. Concerning the conformational change we have directly measured, with a nanometer scale resolution, the switching from a hydrophobic surface to a hydrophilic one taking place inside its cavity induced by the ATP hydrolysis. We have further studied the change in the DNA conformation and topology as a consequence of the interaction with specific DNA-binding molecules and the exposition of the E.coli cells to stress conditions. The level of supercoiling has been shown to be a very sensitive parameter, even if at different extents, to all these factors. Cells grown at temperatures higher than their optimum one tend to decrease the number of the negative superhelical turns in their plasmids in order to increase their thermal stability. The interaction with intercalating molecules induced a transition from positive to negative supercoiling in a temperature dependent way. The effect of the interaction of the DNA with different surfaces has been investigated and a practical application to DNA complex knots is reported.<br/><br/>Observer les objets biologiques en le touchant Schématiquement le Microscope a Force Atomique (AFM) consiste en une pointe très fine fixée a l?extrémité d?un levier Lors de l?imagerie, la pointe de l?AFM gratte la surface de l?échantillon, la topographie de celui-ci induit des déflections du levier qui sont enregistrées au moyen d?un rayon laser réfléchi par le levier. Ces donnés sont ensuit utilisés par un ordinateur pour reconstituer en 3D la surface de l?échantillon. La résolution de l?instrument est fonction entre autre de la dureté, de la rugosité de l?échantillon et de la forme de la pointe. Selon l?échantillon et la pointe utilisée la résolution de l?AFM peut aller de 0.1 A (sur des cristaux) a quelque dizaine de nanomètres (sur des cellules). Cet instrument est particulierment intéressant en biologie en raison de sa capacité à imager des échantillons immergés dans un liquide, c?est à dire dans des conditions quasiphysiologiques. Dans le cadre de ce travail nous avons étudié les changements conformationels de molécules biologiques soumises à des stimulations externes. Nous avons essentielment concentré notre attention sur des complexes protéiques nommé Chaperons Moléculaires et sur des molécules d?ADN circulaire (plasmides). Les Chaperons sont impliqués entre autre dans la résistance des organismes vivants aux stress thermiques et osmotiques. Leur activité consiste essentielment à aider les autres protéines à être bien pliés dans leur conformation finale et, en conséquence, à eviter que ils soient dénaturées et que ils puissent s?agréger. L?ADN, quant à lui est la molécule qui conserve, dans sa séquence, l?information génétique de tous les organismes vivants. Ce travail a spécifiquement concerné l?étude des changements conformationels des chaperonins suit a leur activation par l?ATP. Ces travaux ont montrés a l?échelle de molécule unique la capacité de ces protéines de changer leur surface de hydrophobique a hydrophilique. Nous avons également utilisé l?AFM pour étudier le changement du nombre des surenroulements des molécules d?ADN circulaire lors d?une exposition à un changement de température et de force ionique. Ces travaux ont permis de montrer comment la cellule regle le nombre de surenroulements dans ces molécules pour répondre et contrôler l?expression génétique même dans de conditions extrêmes. Pour les deux molécules en général, c?était très important d?avoir la possibilité de observer leur transitions d?une conformation a l?autre directement a l?échelle d?une seul molécule et, surtout, avec une résolution largement au dessous des la longueur d?onde de la lumière visible que représente le limite pour l?imagerie optique.

Electromagnetic Design of a Solid Steel Rotor Motor for Demanding Operation Environments

The solid-rotor induction motor provides a mechanically and thermally reliable solution for demanding environments where other rotor solutions are prohibited or questionable. Solid rotors, which are manufactured of single pieces of ferromagnetic material, are commonly used in motors in which the rotationspeeds exceed substantially the conventional speeds of laminated rotors with squirrel-cage. During the operation of a solid-rotor electrical machine, the rotor core forms a conductor for both the magnetic flux and the electrical current. This causes an increase in the rotor resistance and rotor leakage inductance, which essentially decreases the power factor and the efficiency of the machine. The electromagnetic problems related to the solid-rotor induction motor are mostly associated with the low performance of the rotor. Therefore, the main emphasis in this thesis is put on the solid steel rotor designs. The rotor designs studied in thisthesis are based on the fact that the rotor construction should be extremely robust and reliable to withstand the high mechanical stresses caused by the rotational velocity of the rotor. In addition, the demanding operation environment sets requirements for the applied materials because of the high temperatures and oxidizing acids, which may be present in the cooling fluid. Therefore, the solid rotors analyzed in this thesis are made of a single piece of ferromagnetic material without any additional parts, such as copper end-rings or a squirrel-cage. A pure solid rotor construction is rigid and able to keep its balance over a large speed range. It also may tolerate other environmental stresses such as corroding substances or abrasive particles. In this thesis, the main target is to improve the performance of an induction motor equipped with a solid steel rotor by traditional methods: by axial slitting of the rotor, by selecting a proper rotor core material and by coating the rotor with a high-resistive stainless ferromagnetic material. In the solid steel rotor calculation, the rotor end-effects have a significant effect on the rotor characteristics. Thus, the emphasis is also put on the comparison of different rotor endfactors. In addition, a corrective slip-dependent end-factor is proposed. The rotor designs covered in this thesis are the smooth solid rotor, the axially slitted solid rotor and the slitted rotor having a uniform ferromagnetic coating cylinder. The thesis aims at design rules for multi-megawatt machines. Typically, mega-watt-size solidrotor machines find their applications mainly in the field of electric-motor-gas-compression systems, in steam-turbine applications, and in various types of largepower pump applications, where high operational speeds are required. In this thesis, a 120 kW, 10 000 rpm solid-rotor induction motor is usedas a small-scale model for such megawatt-range solid-rotor machines. The performance of the 120 kW solid-rotor induction motors is determined by experimental measurements and finite element calculations.

Evolución del crecimiento radial en un rodal adulto de Pinus nigra Arn. de la provincia de Lleida

Se ha estudiado un rodal adulto (edad media = 139 años) de Pinus nigra ssp. salzmannii var. pyrenaica en el W de la comarca del Solsonès (Lérida). Se han medido y extraído testigos de madera de 97 árboles adultos, a partir de los cuales se han medido e interdatado 13.340 anillos anuales, construyendo una cronología de crecimientos que abarca desde 1818 a 1996. Se han analizado las relaciones entre diversos parámetros dendrométricos medidos y los crecimientos observados, encontrándose en general muy bajas correlaciones. Se han construido tres series medias de crecimiento (cronología media, estandarizada, y en función de la edad) a partir de las cuales se ha analizado la evolución del rodal. Se ha observado un prolongado período de ralentización y estancamiento del crecimiento que se mantiene cerca de ochenta años, seguido de una fuerte corta a la que la masa reacciona con un notable incremento del crecimiento radial en un momento en que la edad media era ya de 101 años.

Oikosulkumoottorin roottorivaurioiden tunnistaminen staattorivirran avulla

Diplomityössä esitellään menetelmiä sauvarikon toteamiseksi. Työn tarkoituksena on tutkia roottorivaurioita staattorivirran avulla. Työ jaetaan karkeasti kolmeen osa-alueeseen: oikosulkumoottorin vikoihin, roottorivaurioiden tunnistamiseen ja signaalinkäsittelymenetelmiin, jonka avulla havaitaan sauvarikko. Oikosulkumoottorin vikoja ovat staattorikäämien vauriot ja roottorivauriot. Roottorikäämien vaurioita ovat roottori sauvojen murtuminen sekä roottorisauvan irtoaminen oikosulkujenkaan päästä. Roottorivaurioiden tunnistamismenetelmiä ovat parametrin arviointi ja virtaspektrianalyysi. Työn alkuosassa esitellään oikosulkumoottorien rakenne ja toiminta. Esitellään moottoriin kohdistuvia vikoja ja etsitään ratkaisumenetelmiä roottorivaurioiden tunnistamisessa. Lopuksi tutkitaan, kuinka staattorimittaustietojen perusteella saadut tulokset voidaan käsitellä FFT -algoritmilla ja kuinka FFT -algoritmi voidaan toteuttaa sulautettuna Sharc -prosessorin avulla. Työssä käytetään ADSP 21062 EZ -LAB kehitysympäristöä, jonka avulla voidaan ajaa ohjelmia RAM-sirusta, joka on vuorovaikutuksessa SHARC -laudassa oleviin laitteisiin.

Spatiotemporal variability in radial growth of trees in the Central Pyrenees: climatic and site influences.

To understand how tree growth has responded to recent climate warming, an understanding of the tree-climate-site complex is necessary. To achieve this, radial growth variability among 204 trees established before 1850 was studied in relation to both climatic and site factors. Seventeen forest stands were sampled in the Spanish Central Pyrenees. Three species were studied: Pinus uncinata, Abies alba, and Pinus sylvestris. For each tree, a ring-width residual chronology was built. All trees cross-dated well, indicating a common influence of the regional climate. For the 1952-1993 period, the radial growth of all species, especially P. uncinata, was positively correlated with warm Novembers during the year before ring formation and warm Mays of the year the annual ring formed. Differences in species-stand elevation modulated the growth-climate associations. Radial growth in P. uncinata at high elevation sites was reduced when May temperatures were colder and May precipitation more abundant. In the 20th century, two contrasting periods in radial growth were observed: one (1900-1949) with low frequency of narrow and wide rings, low mean annual sensitivity, and low common growth variation; and another (1950-1994) with the reverse characteristics. The increased variability in radial growth since the 1950s was observed for all species and sites, which suggests a climatic cause. The low shared variance among tree chronologies during the first half of the 20th century may result from a"relaxation" of the elevation gradient, allowing local site conditions to dominate macroclimatic influence. These temporal trends may be related to the recently reported increase of climatic variability and warmer conditions. This study emphasizes the need to carefully assess the relationships between radial growth and site conditions along ecological gradients to improve dendroclimatic reconstructions.

Morphostructure and paleobiology of Mesogean orthophragminids (Discocyclinidae and Orbitoclypeidae, Foraminifera)

Orthophragminids are Paleocene-Eocene bilamellarperforate larger foraminifers characterized by a lenticular test with an equatorial layer of rectangular chamberlets arranged in concentric rings and lateral chamberlets on either side. Usually called 'discocyclinids', orthophragrninids include genera from two families: Discocyclinidae and Orbitoclypeidae.

Characterization of volatile organic gunshot residues in fired handgun cartridges by headspace sorptive extraction

In forensic investigation of firearm-related cases, determination of the residual amount of volatile compounds remaining inside a cartridge could be useful in estimating the time since its discharge. Published approaches are based on following the decrease of selected target compounds as a function of time by using solid phase micro-extraction (SPME). Naphthalene, as well as an unidentified decomposition product of nitrocellulose (referred to as "TEA2"), are usually employed for this purpose. However, reliability can be brought into question given their high volatility and the low reproducibility of their extracted quantities. In order to identify alternatives and therefore develop improved dating methods, an extensive study on the composition and variability of volatile residues in nine different types of cartridges was carried out. Analysis was performed using headspace sorptive extraction (HSSE), which is a more exhaustive technique compared to SPME. 166 compounds were identified (several of which for the first time), and it was observed that the final compositional characteristics of each residue were strongly dependent on its source. Variability of single identified compounds within and between different types of cartridge, as well as their evolution over time, was also studied. Many explosion products containing up to 4 aromatic rings were found to be globally present in high proportions amongst residues. 27 of them (excluding naphthalene) also presented detectable decreases during the first 24 h. Therefore, they could be used as complementary target analytes in future dating methods.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Etelä-Karjalan kuntien aineeton pääoma ja sen kehittämisen haasteet

Tämän kvalitatiivisin menetelmin suoritetun tutkimuksen tavoite on selvittää, mikä on aineettoman pääoman tila Etelä-Karjalan kunnissa ja mitkä ovat niiden aineettoman pääoman kehittämisen haasteet. Kunnat valittiin tutkimukseen kunta- ja palvelurakenneuudistuslaissa määrätyn kaupunkiseutusuunnitelman velvoitteen rajaamana. Tutkimuksen aineisto perustuu kuntien aineettoman pääoman raportteihin sekä kuntien johdolle tehtyihin puolistrukturoituihin haastatteluihin. Aineettoman pääoman raporttien analysointi on suoritettu kirjallisuusanalyysina henkilöstötilinpäätösmallia viitekehyksenä käyttäen, teoreettinen viitekehys on muodostettu kirjallisuusanalyysina aineettoman pääoman ja tietojohtamisen tutkimuskirjallisuudesta. Etelä-Karjalan kunnissa aineetonta pääomaa on osaaminen, koulu-tus, kuntien erilaiset prosessit ja järjestelmät sekä yhteistyö erilaisten sidosryhmien kanssa ja kuntien maine. Kehittämishaasteita aineettomalle pääomalle asettaa kuntien henkilöstön eläköityminen, kuntien yhteistyön lisääntyminen ja erilaisten prosessien ja järjestelmien kehittäminen.

Structural and optical properties of InAs/GaAs quantum structures

The goal of the thesis was to study fundamental structural and optical properties of InAs islands and In(Ga)As quantum rings. The research was carried out at the Department of Micro and Nanosciences of Helsinki University of Technology. A good surface quality can be essential for the potential applications in optoelectronic devices. For such device applications it is usually necessary to control size, density and arrangement of the islands. In order to study the dependence of the structural properties of the islands and the quantum rings on growth conditions, atomic force microscope was used. Obtained results reveal that the size and the density of the In(Ga)As quantum rings strongly depend on the growth temperature, the annealing time and the thickness of the partial capping layer. From obtained results it is possible to conclude that to get round shape islands and high density one has to use growth temperature of 500 ̊C. In the case of formation of In(Ga)As quantum rings the effect of mobility anisotropy is observed that so the shape of the rings is not symmetric. To exclude this effect it is preferable to use a higher annealing temperature of 570 ̊C. Optical properties were characterized by PL spectroscopy. PL emission was observed from buried InAs quantum dots and In(Ga)As quantum rings grown with different annealing time and temperature and covered with a various thickness of the partial capping layer.

'Fast-implantable' aortic valve implantation and concomitant mitral procedures.

Concomitant aortic and mitral valve replacement or concomitant aortic valve replacement and mitral repair can be a challenge for the cardiac surgeon: in particular, because of their structure and design, two bioprosthetic heart valves or an aortic valve prosthesis and a rigid mitral ring can interfere at the level of the mitroaortic junction. Therefore, when a mitral bioprosthesis or a rigid mitral ring is already in place and a surgical aortic valve replacement becomes necessary, or when older high-risk patients require concomitant mitral and aortic procedures, the new 'fast-implantable' aortic valve system (Intuity valve, Edwards Lifesciences, Irvine, CA, USA) can represent a smart alternative to standard aortic bioprosthesis. Unfortunately, this is still controversial (risk of interference). However, transcatheter aortic valve replacements have been performed in patients with previously implanted mitral valves or mitral rings. Interestingly, we learned that there is no interference (or not significant interference) among the standard valve and the stent valve. Consequently, we can assume that a fast-implantable valve can also be safely placed next to a biological mitral valve or next to a rigid mitral ring without risks of distortion, malpositioning, high gradient or paravalvular leak. This paper describes two cases: a concomitant Intuity aortic valve and bioprosthetic mitral valve implantation and a concomitant Intuity aortic valve and mitral ring implantation.

Identification of new transformation products during enzymatic treatment of tetracycline and erythromycin antibiotics at laboratory scale by an on-line turbulent flow liquid-chromatography coupled to a high resolution mass spectrometer LTQ-Orbitrap

This work describes the formation of transformation products (TPs) by the enzymatic degradation at laboratory scale of two highly consumed antibiotics: tetracycline (Tc) and erythromycin (ERY). The analysis of the samples was carried out by a fast and simple method based on the novel configuration of the on-line turbulent flow system coupled to a hybrid linear ion trap – high resolution mass spectrometer. The method was optimized and validated for the complete analysis of ERY, Tc and their transformation products within 10 min without any other sample manipulation. Furthermore, the applicability of the on-line procedure was evaluated for 25 additional antibiotics, covering a wide range of chemical classes in different environmental waters with satisfactory quality parameters. Degradation rates obtained for Tc by laccase enzyme and ERY by EreB esterase enzyme without the presence of mediators were ∼78% and ∼50%, respectively. Concerning the identification of TPs, three suspected compounds for Tc and five of ERY have been proposed. In the case of Tc, the tentative molecular formulas with errors mass within 2 ppm have been based on the hypothesis of dehydroxylation, (bi)demethylation and oxidation of the rings A and C as major reactions. In contrast, the major TP detected for ERY has been identified as the “dehydration ERY-A”, with the same molecular formula of its parent compound. In addition, the evaluation of the antibiotic activity of the samples along the enzymatic treatments showed a decrease around 100% in both cases

Hydrological evidence for a North Atlantic oscillation during the Little Ice Age outside its range observed since 1850.

An annual-resolved precipitation reconstruction for the last 800 yr in Southern Spain has been performed using stable carbon isotope (δ13C) of Pinus nigra tree rings. The reconstruction exhibits high- to low-frequency variability and distinguishes a Little Ice Age (LIA, AD 13501850) characterized by lower averaged rainfall than both in the transition from the Medieval Climate Anomaly to the LIA and in the 20th century. The driest conditions are recorded during the Maunder solar Minimum (mid 17thearly 18th centuries), in good agreement with the Spanish documentary archive. Similar linkage between solar activity (maximum/minimum) and precipitation (increase/decrease) is observed throughout the entire LIA. Additionally, the relationship between the hydrological pattern in the Iberian Peninsula and Morocco during the LIA suggests different spatial distribution of precipitation in the south-eastern sector of the North Atlantic region such as it is known currently. Whereas in the instrumental record the precipitation evolves similarly in both regions and opposite to the North Atlantic oscillation (NAO) index, the coldest periods of the LIA shows a contrasting pattern with drier conditions in the South of Spain and wetter in Northern Africa. We suggest an extreme negative NAO conditions, accompanied by a southward excursion of the winter rainfall band beyond that observed in the last century, can explain this contrast. The sustained NAO conditions could have been triggered by solar minima and higher volcanic activity during the LIA.

Identification of novel factors during the establishment of the Casparian strip in the endodermis

Multicellular organisms rely on specialized tissues that allow for the controlled exchange of matter with their surrounding. In order to function properly, these tissues need to establish a tight connection between the individual cells to prevent uncontrolled passive diffusion across the extracellular space. In animals, these connections are called tight and adherens junctions and are a critical feature of epithelia. These connections, however, rely on direct protein-protein interaction of plasma membrane proteins of adjacent cells. Such a mechanism is not possible in plants due to the cell wall, which encases the individual cells. In order to absorb nutrients, while simultaneously preventing uncontrolled diffusion between cells, land plants have evolved the root endodermis, which is functionally equivalent to animal epithelia. Its cells are surrounded by a precisely localized and aligned, ring-like lignin deposition, called the Casparian strip, and therefore tightly connected between each other. Very little was known about the development of the endodermis and the Casparian strip until recently. In the meantime, however, we have identified a family of endodermis- specific proteins, the CASPs, which recruits extracellular proteins the specific Casparian strip membrane domain (CSD) to locally synthesize lignin in the cell wall. Yet, we hardly knew any specifics on how the CSD is initially defined and how the critically important CASPs are being recruited to it. We therefore conducted a forward genetic screen on the localization of CASPI-GFP in order to identify novel mutants, which lack a defined CSD. We identified 48 mutants, which fell into 15 different complementation groups. While some of the isolated genes had previously been identified through different approaches, nine novel genes, which had never been implicated in CSD development and maintenance, were identified. One of them, LORD OF THE RINGS 2 (.LOTR2) is described to greater detail in this work. LOTR2 encodes for EX070A1, a protein of the evolutionary conserved exocyst complex. This complex has frequently been implicated in various secretory processes across kingdoms. In Arabidopsis, it transiently defines the positioning of CASPI-GFP. We have performed a detailed analysis of the dynamics of EX070A1 and CASPI-GFP, including studies with other markers and propose a mechanism, by which the cytosolic EX070A1 transiently defines a plasma membrane domain to recruit transmembrane proteins, which then recruit extracellular enzymes for localized cell wall modification. Considering the ubiquitous expression of EX070A1, we think that this mechanism is potentially of importance not only for the endodermis and the Casparian strip but also for many other tissues, in which the cell wall becomes locally modified. In fact, many other tissues with secondary cell wall modifications contain proteins very similar to the CASPs. It will be interesting to see to which degree this mechanism is employed in other tissues. As for the endodermis, we have now identified the first gene, which is not specific to the endodermis but shows endodermis-specific dynamics. This might give us a better insight on how the plant modulates this ubiquitously present factor in a cell- or tissue-type specific manner. Considering the knowledge, mutants and tools, which are available to us for investigating the endodermis, the Casparian strip, the exocyst complex and EX070A1 might be just the right experimental system to address these questions. -- Les organismes multicellulaires dépendent des tissues spécialisé pour l'échange contrôlé entre eux et leur environnement. Pour leur bon fonctionnement, les cellules de ces tissus ont besoin d'être très étroitement assemblés afin de prévenir la diffusion non-contrôlée à travers l'espace extracellulaire. Chez les animaux, ces connexions sont appelées jonctions serrées et jonctions adhérentes. Ces jonctions dépendent des interactions directes entre les protéines des cellules voisines. Ceci n'est pas possible chez les plantes à cause de la paroi cellulaire qui recouvre chaque cellule individuellement. Pour absorber les nutriments et en même temps empêcher la diffusion non-contrôlé entre cellules, les plantes ont évolué 1'endoderme dans la racine, qui est fonctionnellement équivalent aux épithéliums des animaux. Les cellules de l'endoderme sont ceinturées par une déposition de lignine très précisément localisées comme un anneau et alignées entre les cellules, et qui, donc, connecte étroitement les cellules avoisinante: Le cadre de Caspary. Peu était connu sur le développement de l'endoderme et le cadre de Caspaiy jusqu'à il y a quelques années. Récemment, pourtant, nous avons identifié une famille de protéines spécifiques à l'endoderme, les CASPs, qui définissent le domaine membranaire du cadre de Caspaiy (CSD). Les CASPs recrutent les protéines extracellulaires nécessaire à la synthèse du cadre de Caspary vers une région limité dans la paroi cellulaire. Pourtant, on connaît très peu les processus spécifiques concernant la définition initiale du CSD et comment les CASPs, qui ont une importance cruciale, sont recrutées vers ce domaine. Par conséquent nous avons mené un crible génétique sur la localisation du CASPI- GFP, qui sert comme marqueur pour le CSD. Notre but étant d'isoler de nouveaux mutants affectés dans l'établissement du CSD. Nous avons identifié 48 mutants, en 15 groupes de complémentation. Bien que certains des gènes isolés étaient déjà impliqué dans la formation du cadre de Caspary, neuf nouveaux gènes n'ayant jamais été impliqués dans le développement ou la maintenance du CSD ont pu être identifiés. Un de ces gènes, LORD OF THE RINGS2 (LOTR2) sera décrit plus en détail dans cette étude. LOTR2 code pour EX070A1, qui est une protéine, du complexe exocyste. Ce complexe de protéines a très bien été conservé au cours de l'évolution. Il était souvent impliqué dans plusieurs processus de sécrétion dans toutes les branches de la vie. Chez Arabidopsis, EX070A1 définit la position du CSD d'une façon transitoire et recrute CASP1- GFP. Nous avons mené une analyse détaillée des dynamiques d'EX070Al et CASPI-GFP ainsi que, des études avec des autres mutants. Nous proposons un mécanisme, d'après lequel EX070A1, recruté du cytosol, définit un domaine dans la membrane plasmique pour localiser des protéines transmembranaires, ces dernières ensuite recruteront des enzymes extracellulaires pour la modification locale de la paroi cellulaire. Vu qu'EX070A1 est exprimé dans toute dans la plante, nous pensons que ce mécanisme est potentiellement important non seulement pour l'endoderme et le cadre de Caspary, mais aussi pour les autres tissus où la paroi cellulaire doit être localement modifiée. En effet, plusieurs autres tissus contiennent des protéines très similaires aux CASPs. Il serait intéressant de voir à quelle dégrée ce mécanisme est également utilisé dans ces tissues. En ce qui concerne l'endoderme, nous avons maintenant identifié le premier gène qui n'est pas exprimé spécifiquement dans l'endoderme, mais qui montre tout de même une dynamique caractéristique dans ce tissu. Il serait intéressant de voir comment la plante peut moduler ce facteur omniprésent d'une façon spécifique. Vu les connaissances, les mutants et les outils qu'on a maintenant à notre disposition, l'endoderme et son cadre de Caspary, le complexe exocyste et EX070A1 sont probablement des bons systèmes expérimentaux pour étudier ces questions. -- Identification des nouveaux facteurs pendant l'établissement du cadre de Caspary dans l'endoderme. Lothar Kalmbach, Département de Biologie Moléculaire Végétale (DBMV), Université de Lausanne. Comme tous les autres organismes multicellulaires, les plantes terrestres dépendent de tissus spécialisés pour l'échange contrôlé avec leur environnement. Ces tissus sont importants pour l'absorption des nutriments mais également pour éviter l'influx de composés toxiques. Chez les plantes, ce tissu se trouve dans la racine. C'est l'endoderme. Grâce au cadre de Caspary, qui permet une forte connexion entre les cellules au niveau de leur paroi, l'endoderme empêche les éléments toxiques d'entrer dans le système vasculaire. Depuis quelques années, nous comprenons de plus en plus la nature et la biosynthèse, ainsi que les protéines impliquées dans l'ancrage des enzymes à la membrane plasmique. Nous n'avons eu, par contre, aucune idée sur le mécanisme qui d'abord définit cet endroit dans la membrane plasmique. Nous avons mené un crible génétique sur la localisation de CASPI-GFP, une protéine, qui recrute les enzymes extracellulaires pour la synthèse du cadre de Caspary. Nous avons identifié plusieurs nouveaux gènes qui sont impliqués dans l'intégrité du cadre de Caspary. L'un de ces gènes est EX070A1, qui est un facteur ayant un rôle important lors de la sécrétion des protéines dans tous les organismes eukaryotes. Ces mutants sont gravement affectés au niveau du cadre de Caspary, mais surtout ils ne sont plus capables de localiser CASPI-GFP. Nous avons suivi la dynamique d'EX070Al et de CASP1-GFP en combinaison avec d'autres marqueurs. Nous avons pu montrer que l'accumulation d'EX070Al est spécifique pour l'endoderme et essentielle pour bien localiser CASPI-GFP et donc, le cadre de Caspary. Ces résultats nous aident à mieux comprendre le développement de l'endoderme mais peuvent potentiellement aussi être utilisés pour étudier les modifications de la paroi cellulaire dans d'autres cellules de la plante.

Symptoms Have Modest Accuracy in Detecting Endoscopic and Histologic Remission in Adults With Eosinophilic Esophagitis.

BACKGROUND & AIMS: It is not clear whether symptoms alone can be used to estimate the biologic activity of eosinophilic esophagitis (EoE). We aimed to evaluate whether symptoms can be used to identify patients with endoscopic and histologic features of remission. METHODS: Between April 2011 and June 2014, we performed a prospective, observational study and recruited 269 consecutive adults with EoE (67% male; median age, 39 years old) in Switzerland and the United States. Patients first completed the validated symptom-based EoE activity index patient-reported outcome instrument and then underwent esophagogastroduodenoscopy with esophageal biopsy collection. Endoscopic and histologic findings were evaluated with a validated grading system and standardized instrument, respectively. Clinical remission was defined as symptom score <20 (range, 0-100); histologic remission was defined as a peak count of <20 eosinophils/mm(2) in a high-power field (corresponds to approximately <5 eosinophils/median high-power field); and endoscopic remission as absence of white exudates, moderate or severe rings, strictures, or combination of furrows and edema. We used receiver operating characteristic analysis to determine the best symptom score cutoff values for detection of remission. RESULTS: Of the study subjects, 111 were in clinical remission (41.3%), 79 were in endoscopic remission (29.7%), and 75 were in histologic remission (27.9%). When the symptom score was used as a continuous variable, patients in endoscopic, histologic, and combined (endoscopic and histologic remission) remission were detected with area under the curve values of 0.67, 0.60, and 0.67, respectively. A symptom score of 20 identified patients in endoscopic remission with 65.1% accuracy and histologic remission with 62.1% accuracy; a symptom score of 15 identified patients with both types of remission with 67.7% accuracy. CONCLUSIONS: In patients with EoE, endoscopic or histologic remission can be identified with only modest accuracy based on symptoms alone. At any given time, physicians cannot rely on lack of symptoms to make assumptions about lack of biologic disease activity in adults with EoE. ClinicalTrials.gov, Number: NCT00939263.