A validated method using RP-HPLC for quantification of reserpine in the Brazilian tree Rauvolfia sellowii Müll. Arg. (Apocynaceae)

This study describes a simple, fast and reproducible method using RP-HPLC-UV, in a gradient system, for quantification of reserpine in Rauvolfia sellowii stem bark. The analysis were carried out on a C18 column; mobile phase was water and acetonitrile, and separations were carried out in 10 min, flow rate of 1.0 mL min-1, 25 ºC and 268 nm. The validation data showed that the method was specific, accurate, precise and robust. Results were linear over a range of 0.625-40.0 μg mL-1, and the mean recovery was 95.1%. The amount of reserpine found in the dried stem bark was 0.01% (m/m).

Atividade inseticida de óleos essenciais de Pelargonium graveolens l'Herit e Lippia alba (Mill) N. E. Brown sobre Spodoptera frugiperda (J. E. Smith)

Insecticidal activity of essential oils of Pelargonium graveolens, Lippia alba and compounds geraniol, linalool, 1,8-cineole, limonene, carvone, citral and Azamax® were evaluated against Spodoptera frugiperda. Topical application assay showed essential oil of P. graveolens has acute toxicity against Spodoptera frugiperda larvae (third instar) with LD50 1.13 µg/mg per insect and LD90 2.56 µg/mg per insect. Three essential oils of L. alba also exhibited insecticidal activity with LD50 ranging from 1.20 to 1.56 µg/mg per insect and LD90 from 2.60 to 3.75 µg/mg per insect. Geraniol, linalool, carvone and citral caused significant mortality of 30, 90, 84 and 64% respectively, compared to negative control. The bioinsecticide, Azamax®, caused lower mortality than the compounds of the essential oils.

Woody Gall symptoms in different citrus species and varieties artificially colonized by the citrus brown aphid Toxoptera citricidus

Seedlings of 41 different citrus species and varieties were massively colonized with the citrus brown aphid Toxoptera citricidus, obtained from Pêra sweet orange (Citrus sinensis) trees, presenting symptoms of the "Capão Bonito" complex of the Citrus tristeza virus (CTV). The objective was to evaluate resistance or tolerance of the varieties to that virus complex, but even after eight months of inoculation no stem pitting was observed in the plants. Otherwise, the presence of galls similar to those induced by the vein enation-woody gall disease was observed in 73% of the plants of Volkamer Palermo (Citrus volkameriana), 60% of the Volkamer Catania 2, 2% of the Rangpur Lime D.22.30 (Citrus limonia), 13% of the Volkamer Australian Red, the Rangpur Lime hybrid, the Orlando tangelo (Citrus reticulata x Citrus paradisi) and the Florida Rough lemon (C. jambhiri), and 7% of the Carrizo citrange (Poncirus trifoliata x Citrus sinensis). The highest incidence and the largest gall size were observed in the Palermo Volkamer showing that this clone would be the most suitable to be used as an indicator plant in biological indexing tests for the disease. There are no previous reports in the literature about the occurrence of woody galls in Orlando tangelo and Carrizo citrange.

The intrinsic mechanisms of softwood fiber damage in brown stock fiber line unit operations Lappeenranta 2010

The effects of pulp processing on softwood fiber properties strongly influence the properties of wet and dry paper webs. Pulp strength delivery studies have provided observations that much of the strength potential of long fibered pulp is lost during brown stock fiber line operations where the pulp is merely washed and transferred to the subsequent processing stages. The objective of this work was to study the intrinsic mechanisms which maycause fiber damage in the different unit operations of modern softwood brown stock processing. The work was conducted by studying the effects of industrial machinery on pulp properties with some actions of unit operations simulated in laboratory scale devices under controlled conditions. An optical imaging system was created and used to study the orientation of fibers in the internal flows during pulp fluidization in mixers and the passage of fibers through the screen openings during screening. The qualitative changes in fibers were evaluated with existing and standardized techniques. The results showed that each process stage has its characteristic effects on fiber properties: Pulp washing and mat formation in displacement washers introduced fiber deformations especially if the fibers entering the stage were intact, but it did not decrease the pulp strength properties. However, storage chests and pulp transfer after displacement washers contributed to strength deterioration. Pulp screening proved to be quite gentle, having the potential of slightly evening out fiber deformations from very deformed pulps and vice versa inflicting a marginal increase in the deformation indices if the fibers were previously intact. Pulp mixing in fluidizing industrial mixers did not have detrimental effects on pulp strength and had the potential of slightly evening out the deformations, provided that the intensity of fluidization was high enough to allow fiber orientation with the flow and that the time of mixing was short. The chemical and mechanical actions of oxygen delignification had two distinct effects on pulp properties: chemical treatment clearly reduced pulp strength with and without mechanical treatment, and the mechanical actions of process machinery introduced more conformability to pulp fibers, but did not clearly contribute to a further decrease in pulp strength. The chemical composition of fibers entering the oxygen stage was also found to affect the susceptibility of fibers to damage during oxygen delignification. Fibers with the smallest content of xylan were found to be more prone to irreversibledeformations accompanied with a lower tensile strength of the pulp. Fibers poor in glucomannan exhibited a lower fiber strength while wet after oxygen delignification as compared to the reference pulp. Pulps with the smallest lignin content on the other hand exhibited improved strength properties as compared to the references.

Leaf blight and defoliation of Eugenia spp. caused by Cylindrocladium candelabrum and C. spathiphylli in Brazil

Leaf blight and defoliation of Eugenia stipitata Mc Vaugh and Eugenia patrisii Vahl, caused respectively by Cylindrocladium candelabrum (Calonectria scoparia) and C. spathiphylli (Calonectria spathiphylli) are reported in the state of Pará, Brazil. On both host species, the disease is characterized by dark brown lesions of different sizes and shapes. A whitish bright sporulation, resembling Cylindrocladium is observed on the necrotic lesions by using a stereomycroscope or a pocket lense (10-20 X). Under favorable conditions and depending on the level of infection, intense premature tree defoliation may also be found.Although the conidial germination and mycelial growth were higher at 25ºC for both species, C. candelabrum was more sensitive to the variation of temperature (10, 20, 30 and 40 ºC) than C. spathiphylli. This is the first report of C. candelabrum and C. spathiphylli on Eugenia stipitata (araçá-boi) and on Eugenia patrisii (ubaia-da-amazônia), respectively in Brazil.

Mycobiota evolution during storage of paddy, brown and milled rice in different genotypes

The rice grain is frequently infected by a series of pathogens (fungi) during its storage, producing damages to the economy and health of humans. The aim of this study was to identify the fungal genera present in different rice genotypes and to quantify their variation during storage. Paddy, brown and milled rice fractions of Nutriar, (N) H329-5(H329) and Don Ignacio genotypes were analyzed at 4, 8 and 12 months of storage. Fungi were identified based on their micromorphological characteristics and colonies. The observed genera according to their frequency were: Alternaria, Nigrospora, Epicoccum, Bipolaris, Curvularia, Cladosporium and Fusarium (field fungi) and Penicillium and Aspergillus (storage fungi). The mycobiota composition was different depending on the grain fraction and the period of storage: field fungi were located in the hulls and bran layers, while storage fungi were mainly in the endosperm. The different genotypes showed different susceptibility to contamination.

Regeneration of five commercially-valuable tree species after experimental logging in an Amazonian forest

This study investigated the regeneration variation of five commercially valuable tree species in relation to different intensities of felling in fourteen 4-ha plots in an area under experimental forest management. This experiment was carried out in a typical Amazonian tropical forest sample on "terra-firme," in Manaus (AM). Plots were logged 7 and 8 years (1987 and 1988), or 3 years (1993) before the study. All trees with height greater than 2 m, and diameter at breast height (DBH) smaller than 10 cm were measured. Only Aniba hostmanniana, Ocotea aciphylla, Licaria pachycarpa, Eschweilera coriacea and Goupia glabra were sufficiently common for individual analyses. These species have high timber values in the local market. Eight years after logging, the species responded differently to logging intensities. The numbers of individuals of Goupia glabra and Aniba hostmanniana were positively related to the intensity of logging, while Ocotea aciphylla, Licaria pachycarpa, and Eschweilera coriacea showed no statistically significant response. In the most recently (1993) logged areas, Goupia glabra and Aniba hostmanniana had higher numbers of individuals than the control plots.