960 resultados para Brass founding.
Resumo:
An automatic Procedure with a high current-density anodic electrodissolution unit (HDAE) is proposed for the determination of aluminium, copper and zinc in non-ferroalloys by flame atonic absorption spectrometry, based on the direct solid analysis. It consists of solenoid valve-based commutation in a flow-injection system for on-line sample electro-dissolution and calibration with one multi-element standard, an electrolytic cell equipped with two electrodes (a silver needle acts as cathode, and sample as anode), and an intelligent unit. The latter is assembled in a PC-compatible microcomputer for instrument control, and far data acquisition and processing. General management of the process is achieved by use of software written in Pascal. Electrolyte compositions, flow rates, commutation times, applied current and electrolysis time mere investigated. A 0.5 mol l(-1) HNO3 solution was elected as electrolyte and 300 A/cm(2) as the continuous current pulse. The performance of the proposed system was evaluated by analysing aluminium in Al-allay samples, and copper/zinc in brass and bronze samples, respectively. The system handles about 50 samples per hour. Results are precise (R.S.D < 2%) and in agreement with those obtained by ICP-AES and spectrophotometry at a 95% confidence level.
Resumo:
Germanate glasses are of interest for optoelectronic applications because they combine high mechanical strength, high chemical durability and temperature stability with a large transmission window (400 to 4500 nm) and high refractive index (2.0). GeO2-PbO-Bi2O3 glasses doped with Y-b(3+) were fabricated by melting powders in a crucible and then pouring them in a brass mold. Energy Dispersive Spectroscopy showed that the glass composition has a high spatial uniformity and that the Yb concentration in the solid sample is proportional to the Yb concentration in the melt, what was confirmed by absorption measurements. Intense blue emission at 507 nm was observed, corresponding to half of the wavelength of the near infrared region (NIR) emission; besides, a decay lifetime of 0.25 ms was measured and this corresponds to half of the decay lifetime in the infrared region; these are very strong indications of the presence of blue cooperative luminescence. Larger targets have been produced to be sputtered, resulting in thin films for three dimensional (3D) display and waveguide applications. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
Over a 3-year period, all colony foundations of the social wasps Polistes versicolor and Polistes simillimus were registered, and the fate and growth of all colonies were followed. P. simillimus exhibited a greater number of colony-founding attempts, while P. versicolor had a larger number of adult colonies. P. simillimus had greater cell numbers and number of adults produced per colony. P. simillimus reutilized only a small percentage of brood cells for adult production for up to 2 generations, while P. versicolor reutilized a large percentage of brood cells for up to 3 generations. Consequently, cell production was higher in P. simillimus. Because of a high rate of adult production and extensive cell production, we suggest that P. simillimus may demonstrate paragynous social organization, and may demonstrate an intermediate form between polygynous and monogynous Vespidae. Paragynous associations may lead to lower predation pressures and a relative independence of adult production on time.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The Brazilian population, presents genes for abnormal hemoglobins with variable frequencies, which are influenced by the founding racial groups. Thus, the detection of carriers of the genetic alterations is important for public health, since they represent sources of new beterozygotes and possible homozygotes. The control of the hemoglobin pathologies has been possible by means of genetic counseling and early diagnosis. The clinical follow-up of the homozygotes and the orientation of the beterozygotes and especially the couples at risk represent a more effective mode of acting to avoid the birth of children who are carriers of a genetic disease, that is frequently lethal. For these reasons this work had as its objectives: to evaluate the importance of testing in pregnant women for the detection of hemoglobin pathologies with the purpose of investigating the prevalence, attaining prevention, a familial study and awareness; for the positive cases such as couples at risk, orient as to appropriate medical attendance; and to evaluate the response to the program. Of the total of 696 pregnant women analysed, 10.7% revealed hemoglobin pathologies with the following rates: alpha Thalassemia 6.75%; Hb AS 2.01%; beta minor Thalassemia 1.29%; Hb AC 0.28%; Hb AJ 0.14%; Hb AS/Alpha Thalassemia 0.14% and P.H.H.F. 0.14%. The high rates of hemoglobin pathologies encountered in the population of pregnant women studied shows the necessity of the implantation of tests for these abnormalities in the pre-natal routine, since in this period the mothers are more apt to be preoccupied with their own health and that of their babies and, however earlier diagnosed the alterations in the hemoglobins, better and more adequate will be the orientations given the couple.
Resumo:
This work presents a technique for the cold forming of thin-walled cylindrical tubes, aimed at obtaining a symmetrical joint with an unconventional forming technique, using elastomer rod. The purpose of this work is to investigate the influence of the anisotropy on the total forming force, through the use of elastomer for obtaining T-junctions, in order to get a better result between experimental values and the analytical solution. For total forming force forecasting, it will be used the upper-bound theory and for a better understanding on the anisotropy behavior of the material, it will be employed the quadratic yielding criterion proposed by Hill. The employed materials for such investigation were Aluminum, Brass and Copper.
Resumo:
Heat-transfer studies were carried out in a packed bed of glass beads, cooled by the wall, through which air percolated. Tube-to-particle diameter ratios (D/dp) ranged from 1.8 to 55, while the air mass flux ranged from 0.204 to 2.422 kg/m2·s. The outlet bed temperature (TL) was measured by a brass ring-shaped sensor and by aligned thermocouples. The resulting radial temperature profiles differed statistically. Angular temperature fluctuations were observed through measurements made at 72 angular positions. These fluctuations do not follow a normal distribution around the mean for low ratios D/dp. The presence of a restraining screen, as well as the increasing distance between the temperature measuring device and the bed surface, distorts TL. The radial temperature profile at the bed entrance (T0) was measured by a ring-shaped sensor, and T 0 showed to be a function of the radial position, the particle diameter, and the fluid flow rate.
Resumo:
In this study, known-age workers of Agelaia pallipes (Olivier) were introduced into a colony maintained in the laboratory and the effects of age polyethism on the worker life span were observed. As in other Neotropical swarm-founding wasps, the results showed that younger workers remained on different places inside the nest performing activities related to the brood and nest maintenance, while risky tasks such as foraging were performed by older workers. Furthermore, the start of foraging activities had a significant effect on worker mortality.
Resumo:
A morphological cladistic analysis of the Neotropical swarm-founding genus Angiopolybia Araujo is presented. A single cladogram resulted from the analysis, with the following ingroup topology: (A. pallens + A. zischkai) + (A. paraensis + A. obidensis). The monophyly of the genus is supported by four synapomorphies. A new identification key is presented for the genus. Copyright © 2007 Magnolia Press.
Resumo:
The aim of this study is to evaluate the flexural resistance of three types of restorative materials: compomer (Freedom), resin-modified glass-ionomer (Vitremer) and composite resin (Esthet-X), observing whether the application of bleaching agent can cause alterations of their flexural properties. Sixty samples were made using a 10 x 1 x 1 mm brass mold, and divided into three groups: G1- Freedom (SDI); G2- Vitremer (3M ESPE); G3- Esthet-X (Dentsply). On half of the samples of each group (10 samples) the bleaching treatment was applied and the other half used as control, was stored in distilled water at a temperature of 37 degrees C. Whiteness HP Maxx bleaching system was applied on the sample surface following the manufacturer's recommendations, simulating the bleaching treatment at the clinic. After this period, a flexural strength (three-point bending) test was conducted using (EMIC DL 1000) machine until the samples fractured. The data were submitted to ANOVA and Tukey tests. Of the restorative materials studied, G3-(87.24 +/- 31.40 MPa) presented the highest flexural strength, followed by G1-(61.67 +/- 21.32 MPa) and G2-(61.67 +/- 21.32 MPa). There was a statistical difference in flexural strength after the bleaching treatment. It was concluded that the use of a beaching agent can promote significant alteration of the flexural strength of these restorative materials.
Resumo:
Includes bibliography
Resumo:
This study reviews published data on the behavior and natural history of Chartergellus and presents the first observations on social interactions in this genus of tropical swarm-founding wasps. Observations of Chartergellus golfitensis in Costa Rica and C. punctatior in Colombia showed that queens perform a post-oviposition egg-guarding vigil, and a bending display like that characteristic of epiponine social wasps that lack consistent morphological differences between workers and queens and have caste determination in the adult stage. Young, old, and queen (egg-laying) females of C. golfitensis showed small differences that indicate color changes with age, and structural differences that could be due to seasonal or colony-cycle changes in developmental conditions, but do not rule out the possibility of pre-adult caste determination, a phenomenon that needs to be carefully distinguished from pre-adult caste bias. Sexual dimorphism and the behavior of males at the nest in C. golfitensis is described, as well as the aggressive and avoidance behavior of females toward males. Nest structure in both species is as described previously for Chartergellus species, but some anomalies and their possible evolutionary significance are discussed. Cell initiation by an egg-laying queen, a behavior never seen by workers, and by a young female with slightly developed ovaries, may be vestiges of ancestral solitary reproductive traits where developed ovaries are associated with cell construction. © 2010 Dipartimento di Biologia Evoluzionistica dell'Università, Firenze, Italia.
Resumo:
Incluye Bibliografía
Resumo:
Incluye Bibliografía
Resumo:
Clypearia is a rare genus of swarm-founding Neotropical wasp whose biology is very little known. Morphological castes differences, condition of ovaries, relative age, and color pattern differences were analyzed in three species of Clypearia. Physiological differences and low morphometric differentiation between queens and workers were present in all species studied, indicating that these species are characterized by physiological caste only. We suggest that caste determination in the three Clypearia species studied is postimaginal. © 2010 Giovanna Tocchini Felippotti et al.