The viability of subcarrier modulation for enhancing the performance of installed-base MMF links

The technique of Subcarrier Modulation is assessed by statistical analysis as a viable solution to broadband data transmission over dispersion limited multimode fibre. It is shown that a suitable passband region for transmission of 2.5 Gb/s channels exists at 5 GHz in greater than 80% of worst-case fibres under standard SMF/MMF launch conditions. ©2002 Optical Society of America.

BEHAVIOUR OF FIXED CANTILEVER WALLS SUBJECT TO LATERAL SHAKING.

A programme of research on the seismic behaviour of retaining walls has been under way at Cambridge since 1981. Centrifuge tests have presently been conducted both on cantilever walls and isolated mass walls, retaining dry sands of varying grading and density. This paper is devoted to the modelling of fixed-base cantilever walls retaining Leighton Buzzard (14/25) sand of relative density 99% with a horizontal surface level with the crest of the wall. The base of the centrifuge container was used to fix the walls, and to provide a rigid lower boundary for the sand. No attempt was made to inhibit the propagation of compression waves from the side of the container opposite the inside face of the model wall. The detailed analysis of dynamic deflections and bending moments was made difficult by the anelastic nature of reinforced concrete, and the difficulty of measuring bending strains thereon. A supplementary programme of well-instrumented tests on Dural walls of similar stiffness, including the modelling of models, was therefore carried out. Refs.

Avaliaçāo preliminar do estado da exploraçāo de Kapenta (Limnothrissa miodon, Boulenger 1906), em cahora bassa com base em dados históricos de captura e esforço de 1995-2000

The fishing of kapenta (Limnothrissa miodon, Boulenger 1906) on the Cahora Bassa Dam started around 1992, when considerable stocks of this species were discovered in the lake. The species is believed to have successful established in the Dam following a natural introduction through a downstream movement from Kariba dam where it was introduced in 1967/68. Fisheries statistics on the kapenta fishery have been collected since 1993 by the Ministry of Fisheries through the Provincial Offices for Fisheries Administration of Tete (SPAP - Tete) but only data from 1995 onward are available on the database of the Ministry of Fisheries and these are the data that was used for compiling the present report on which trends of fishing effort, catch and CPUE are analyzed. Catch and effort have increased with time, from a minimum of the 4 thousand metric tons for an annual fishing effort of 36 fishing rigs in 1995 to a maximum of 12 tons for a fishing effort of 135 rigs while CPUE followed a decreasing trend during the same period. Correlation analysis between catch and effort suggests that probably environmental factors may have influence on catch variation than the increase on fishing effort. Two models were applied for calculating MSY and FMSY resulting in two pairs of roof leading to two scenario of fisheries management. 10137 tons and a FMSY of 177 fishing rigs were computed using Schaefer model while 11690 tons and a FMSY of 278 were obtained using Fox model. Considering the differences between the two results and considering the fact that the two models have no differences in terms of precision and the fact that their determination coefficient are not different it is suggested, using the precautionary principle that result from Schaefer model be a adopted for fisheries management purpose.

Adaptive control of combustion instabilities for unknown sign of the high frequency gain

A type of adaptive, closed-loop controllers known as self-tuning regulators present a robust method of eliminating thermoacoustic oscillations in modern gas turbines. These controllers are able to adapt to changes in operating conditions, and require very little pre-characterisation of the system. One piece of information that is required, however, is the sign of the system's high frequency gain (or its 'instantaneous gain'). This poses a problem: combustion systems are infinite-dimensional, and so this information is never known a priori. A possible solution is to use a Nussbaum gain, which guarantees closed-loop stability without knowledge of the sign of the high frequency gain. Despite the theory for such a controller having been developed in the 1980s, it has never, to the authors' knowledge, been demonstrated experimentally. In this paper, a Nussbaum gain is used to stabilise thermoacoustic instability in a Rijke tube. The sign of the high frequency gain of the system is not required, and the controller is robust to large changes in operating conditions - demonstrated by varying the length of the Rijke tube with time. Copyright © 2008 by Simon J. Illingworth & Aimee S. Morgans.

Active control of sound radiated by a submarine hull in bending vibration using inertial actuators

Submarines are efficient sources of low frequency radiated noise due to the vibrations induced by the rotation of the propeller in a non uniform wake. In this work the possibility of using inertial actuators to reduce the far field sound pressure is investigated. The submerged vessel is modelled as a cylindrical shell with two conical end caps. Complicating effects such as ring stiffeners, bulkheads and the fluid loading are taken into account. A harmonic radial force is transmitted from the propeller to the hull through the stern end cone and it is tonal at the blade passing frequency (rotational speed of the shaft multiplied by the number of blades). The actuators are attached at the inside of the prow end cone to form a circumferential array. Both Active Vibration Control (AVC) and Active Structural Acoustic Control (ASAC) are analysed and it is shown that the inertial actuators can significantly reduce the far field sound pressure.

Comparison of quantum chemistry calculation methods of nucleic acid base-quartets

Nine base-quartets were calculated by six semi-empirical methods and ab initio Hartree-Fork method using STO-3G basis set. The results showed that PM3 method can be use to calculate base quartets, the results of PM3 calculations are close to the ab initio