Organizational challenges of community associations:applying nonprofit research to real-world problems

Can voluntary and nonprofit research be helpful for local community associations (CAs) seeking to respond to organizational challenges and problems? This paper builds on a study of an organizational crisis in an English CA to explore this question. The events which precipitated and prolonged the crisis seemed inexplicable to outside observers. Yet the study found that much of what occurred could be explained in the light of earlier theories and research. The paper concludes that voluntary and nonprofit scholarship, as well as generic organizational theories, has the potential to be helpful for community association members and activists in anticipating and responding to organizational problems. But scholars need to do more to disseminate existing research findings; to make them accessible and to adapt them to the distinctive needs and real world problems of community associations.

Applying Genetic Algorithm In Query Improvement Problem

This paper presents an adaptive method using genetic algorithm to modify user’s queries, based on relevance judgments. This algorithm was adapted for the three well-known documents collections (CISI, NLP and CACM). The method is shown to be applicable to large text collections, where more relevant documents are presented to users in the genetic modification. The algorithm shows the effects of applying GA to improve the effectiveness of queries in IR systems. Further studies are planned to adjust the system parameters to improve its effectiveness. The goal is to retrieve most relevant documents with less number of non-relevant documents with respect to user's query in information retrieval system using genetic algorithm.

Applying A Normalized Compression Metric To The Measurement Of Dialect Distance

The paper discusses the application of a similarity metric based on compression to the measurement of the distance among Bulgarian dia- lects. The similarity metric is de ned on the basis of the notion of Kolmo- gorov complexity of a le (or binary string). The application of Kolmogorov complexity in practice is not possible because its calculation over a le is an undecidable problem. Thus, the actual similarity metric is based on a real life compressor which only approximates the Kolmogorov complexity. To use the metric for distance measurement of Bulgarian dialects we rst represent the dialectological data in such a way that the metric is applicable. We propose two such representations which are compared to a baseline distance between dialects. Then we conclude the paper with an outline of our future work.

EnDNA-Prot:identification of DNA-binding proteins by applying ensemble learning

DNA-binding proteins are crucial for various cellular processes, such as recognition of specific nucleotide, regulation of transcription, and regulation of gene expression. Developing an effective model for identifying DNA-binding proteins is an urgent research problem. Up to now, many methods have been proposed, but most of them focus on only one classifier and cannot make full use of the large number of negative samples to improve predicting performance. This study proposed a predictor called enDNA-Prot for DNA-binding protein identification by employing the ensemble learning technique. Experiential results showed that enDNA-Prot was comparable with DNA-Prot and outperformed DNAbinder and iDNA-Prot with performance improvement in the range of 3.97-9.52% in ACC and 0.08-0.19 in MCC. Furthermore, when the benchmark dataset was expanded with negative samples, the performance of enDNA-Prot outperformed the three existing methods by 2.83-16.63% in terms of ACC and 0.02-0.16 in terms of MCC. It indicated that enDNA-Prot is an effective method for DNA-binding protein identification and expanding training dataset with negative samples can improve its performance. For the convenience of the vast majority of experimental scientists, we developed a user-friendly web-server for enDNA-Prot which is freely accessible to the public. © 2014 Ruifeng Xu et al.

Assessing an experimental approach to industrial policy evaluation:Applying RCT+ to the case of Creative Credits

Experimental methods of policy evaluation are well-established in social policy and development eco-nomics but are rare in industrial and innovation policy. In this paper, we consider the arguments forapplying experimental methods to industrial policy measures, and propose an experimental policy eval-uation approach (which we call RCT+). This approach combines the randomised assignment of firmsto treatment and control groups with a longitudinal data collection strategy incorporating quantitativeand qualitative data (so-called mixed methods). The RCT+ approach is designed to provide a causativerather than purely summative evaluation, i.e. to assess both ‘whether’ and ‘how’ programme outcomesare achieved. In this paper, we assess the RCT+ approach through an evaluation of Creative Credits – aUK business-to-business innovation voucher initiative intended to promote new innovation partnershipsbetween SMEs and creative service providers. The results suggest the potential value of the RCT+ approachto industrial policy evaluation, and the benefits of mixed methods and longitudinal data collection.

Specifics in Applying Agile Software Methodologies in Portal Solutions

Agile methodologies are becoming more popular in the software development process nowadays. The iterative development lifecycle, openness to frequent changes, tight cooperation with the client and among the software engineers are turning into more and more effective practices and respond to a higher extend to the current business needs. It is natural to raise the question which methodology is the most suitable for use when starting and managing a project. This depends on many factors—product characteristics, technologies used, client’s and developer’s experience, project type. A systematic analysis of the most common problems appearing when developing a particular type of projects—public portal solutions, is proposed. In the case at hand a very close interaction with various types of end users is observed. This is a prerequisite for permanent changes during the development and support cycles, which makes them ideal candidates for using an agile methodology. We will compare the ways in which each methodology addresses the specific problems arising and will finish with ranking them according to their relevance. This might help the project manager in choosing one or a combination of the methodologies.

Applying Associative Classifier PGN for Digitised Cultural Heritage Resource Discovery

Resource discovery is one of the key services in digitised cultural heritage collections. It requires intelligent mining in heterogeneous digital content as well as capabilities in large scale performance; this explains the recent advances in classification methods. Associative classifiers are convenient data mining tools used in the field of cultural heritage, by applying their possibilities to taking into account the specific combinations of the attribute values. Usually, the associative classifiers prioritize the support over the confidence. The proposed classifier PGN questions this common approach and focuses on confidence first by retaining only 100% confidence rules. The classification tasks in the field of cultural heritage usually deal with data sets with many class labels. This variety is caused by the richness of accumulated culture during the centuries. Comparisons of classifier PGN with other classifiers, such as OneR, JRip and J48, show the competitiveness of PGN in recognizing multi-class datasets on collections of masterpieces from different West and East European Fine Art authors and movements.

Applying Data Mining Tools in E-Learning

Report published in the Proceedings of the National Conference on "Education and Research in the Information Society", Plovdiv, May, 2014

Identifying the scope for savings at inpatient episode level:an illustration applying DEA to chronic obstructive pulmonary disease

Chronic obstructive pulmonary disease (COPD) is characterized by a largely irreversible obstruction of the airways, and is one of the leading causes of chronic morbidity and mortality worldwide. This paper illustrates the use of Data Envelopment Analysis (DEA) to assess the potential for cost savings at COPD inpatient episode level. The analysis uses the length of stay of each episode as a surrogate for expenditure on that episode while allowing for the medical condition of the patient and the quality of care received. We find substantial possible reductions in length of stay which would translate to cost savings. The paper also explores differences both between hospitals and between care teams within hospitals so that cost efficient protocols of treatment can be identified and disseminated.

Evaluation of applying retaining shield rotor for high-speed interior permanent magnet motors

This paper proposes a novel rotor structure for high-speed interior permanent magnet motors to overcome huge centrifugal forces under high-speed operation. Instead of the conventional axial stacking of silicon-steel laminations, the retaining shield rotor is inter-stacked by high-strength stainless-steel plates to enhance the rotor strength against the huge centrifugal force. Both mechanical characteristics and electromagnetic behaviors of the retaining shield rotor are analyzed using finite-element method in this paper. Prototypes and experimental results are demonstrated to evaluate the performance. The analysis and test results show that the proposed retaining shield rotor could effectively enhance the rotor strength without a significant impact on the electromagnetic performance, while some design constraints should be compromised.

A lean elvek alkalmazása az egészségügyi folyamatok fejlesztésében = Applying lean principles in healthcare process development

A fejlett társadalmak egészségügyi szolgáltató rendszerei napjainkban kettős kihívással néznek szembe: miközben a társadalom a szolgáltatási színvonal emelkedését, a hibák számának a csökkenését várja el, addig a költségvetési terhek miatt a költségcsökkentés is feltétlenül szükséges. Ez a kihívás nagyságában összevethető azzal, amellyel az USA autóipara nézett szembe az 1970-es évektől. A megoldást az autóipar esetében a konkurens „lean” menedzsment elvek és eszközök megértése és alkalmazása jelentette. A tanulmány arra keresi a választ, hogy vajon lehetséges-e ennek a megoldásnak az alkalmazása az egészségügy esetében is. A cikk az egészségügy problémájának bemutatása után tárgyalja a lean menedzsment kialakulását és hogy milyen módon került köztudatba. A tanulmány második felében a szakirodalomban fellelhető, a témával kapcsolatos tapasztalatokat foglalja össze, majd levonja a következtetéseket. = In developed societies healthcare service systems are facing double challenge; society expects service level to rise and the number of mistakes to drop, but at the same time, because of the overloaded budgets, cutting cost is also absolutely necessary. This challenge compares to the one the US automotive industry was facing in the 1970-s. In case of the automotive industry the solution was the comprehension and application of the principles and the tools of lean management. This study aims to answer the question whether it is possible to apply this solution also in the case of the healthcare system. The article first introduces the problems in the healthcare system, than describes the formation of lean management concept and its wide spread. The second half of the study summarizes the available knowledge in the literature and drives conclusions.

Financial crisis and the change in the practice of applying common charge costs

The global financial crisis has not left the members of the EU untouched. Financial results have significantly dropped, businesses were folded in great numbers, the rate of employment decreased, social tension got fortified, and so did the national deficits in the budget in the majority of the countries. The decisive members of the community reacted fairly quickly to the challenges of the global economic crisis, and among the steps taken there were simultaneously ones to boost the economy and others to lower the expenses of the expenditure. The author examines what role was given to the steps in taxation policy as indirect regulating tools, and that how the decisions brought touch upon the previously issued harmonization strategy.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Governance in the European Union - Applying the "trilemma of global politics"

The European Union with its sophisticated institutional system is the most important regional integration on Earth. This tight form of economic integration converges to the level that Dani Rodrik calls hyperglobalization in his model, the political trilemma of globalisation. In our paper we develop the mentioned model and then we apply it to the case of the European Integration. We argue that if we want to maintain the deep integration among member states in the EU we have to pass more and more functions of the nation states to the federation level. In case of the EMU that means that federal fiscal policy is needed which could lead to multi-speed Europe considering new member states’ reluctance to give up their specific institutions.