Demonstration of CoWDM using DPSK modulator array with injection-locked lasers

A practical implementation of coherent wavelength division multiplexing (CoWDM) is demonstrated for the first time using injection-locked lasers and a DPSK modulator array. For a 31.99 Gbit/s system (three subcarriers at 10.664 Gbit/s) the null-to-null spectral bandwidth was only 42.656 GHz and the average receiver sensitivity measured was -33.5 dBm when all subcarrier phases were optimised.

Performance characterisation of 42.65 Gbit/s dual-gate asynchronous digital optical regenerator using single MZM

The tolerance of a 42.65 Gbit/s dual-gate asynchronous digital optical regenerator using a single Mach-Zehnder modulator to optical signal-to-noise-ratio degradation and chromatic dispersion is experimentally demonstrated.

Validation of the Paediatric food allergy quality of life questionnaire (PFA-QL)

Objective - The aim of the current study was to validate child (PFA-QL) and parent–proxy (PFA-QL-PF) versions of the scale in a specialist allergy clinic and in parents of children with food allergy. Methods - For the clinic sample, a generic QoL scale (PedsQL) and the PFA-QL were completed by 103 children (age 6–16 yrs) with peanut or tree nut allergy; test–retest reliability of the PFA-QL was tested in 50 stable patients. For the non-clinical sample, 756 parents of food allergic children completed the PFA-QL-PF, the Child Health Questionnaire (CHQ-PF50), Food Allergy Quality of Life Parental Burden Scale (FAQL-PB) and a Food Allergy Impact Measure. Results - The PFA-QL and PFA-QL-PF had good internal consistency (a's of 0.77–0.82), and there was moderate-to-good agreement between the generic- and disease-specific questionnaires. The PFA-QL was stable over time in the clinic sample, and in both samples, girls were reported to have poorer QoL than boys. Conclusions - The PFA-QL and PFA-QL-PF are reliable and valid scales for use in both clinical and non-clinical populations. Unlike other available tools, they were developed and validated in the UK and thus provide a culture-specific choice for research, clinical trials and clinical practice in the UK. Validation in other countries is now needed.

The psychological impact of diagnostic food challenges to confirm the resolution of peanut or tree nut allergy

Background - Twenty percent of children outgrow peanut allergy and 10% outgrow tree nut allergy. Resolution can be confirmed by a food challenge. Little is known about the psychosocial impact of the challenge. We aimed to investigate effects of a food challenge on anxiety, stress and quality of life (QoL) in children and their mothers on the day of a food challenge to peanuts or nuts, and in the months following the challenge. Methods - One hundred and three families participated. Forty children undergoing food challenges to access resolution of allergy, and their mothers, completed validated questionnaires to measure generic and food specific quality of life, stress and anxiety prior to challenge, on the day of investigation and 3–6 months later. Sixty-three children with no clinical indication to challenge (i.e. in the opinion of the allergist had persistent allergy) acted as comparison group completing questionnaires 3–6 months apart. Results - Mothers reported raised anxiety on the day of challenge (P = 0.007), but children were less anxious. The children (P = 0.01) and mothers (P = 0.01) had improved food-related, but not general, QoL 3–6 months following challenge. Children reported lower anxiety levels following the challenge (P = 0.02), but anxiety remained unchanged in mothers. The improvements in maternal and children's QoL and anxiety levels were irrespective of the challenge outcome and despite co-existing food allergies in 50% of children. Conclusions - Mothers experienced increased anxiety on the day of food challenge, unlike the children, perhaps reflecting the differences in their perceived risks. Food challenges are associated with improved food-related QoL in the following months even in those with a positive challenge.

Data envelopment analysis model for the appraisal and relative performance evaluation of nurses at an intensive care unit

The appraisal and relative performance evaluation of nurses are very important and beneficial for both nurses and employers in an era of clinical governance, increased accountability and high standards of health care services. They enhance and consolidate the knowledge and practical skills of nurses by identification of training and career development plans as well as improvement in health care quality services, increase in job satisfaction and use of cost-effective resources. In this paper, a data envelopment analysis (DEA) model is proposed for the appraisal and relative performance evaluation of nurses. The model is validated on thirty-two nurses working at an Intensive Care Unit (ICU) at one of the most recognized hospitals in Lebanon. The DEA was able to classify nurses into efficient and inefficient ones. The set of efficient nurses was used to establish an internal best practice benchmark to project career development plans for improving the performance of other inefficient nurses. The DEA result confirmed the ranking of some nurses and highlighted injustice in other cases that were produced by the currently practiced appraisal system. Further, the DEA model is shown to be an effective talent management and motivational tool as it can provide clear managerial plans related to promoting, training and development activities from the perspective of nurses, hence increasing their satisfaction, motivation and acceptance of appraisal results. Due to such features, the model is currently being considered for implementation at ICU. Finally, the ratio of the number DEA units to the number of input/output measures is revisited with new suggested values on its upper and lower limits depending on the type of DEA models and the desired number of efficient units from a managerial perspective.

Fare policies:a tool for imroving the financial performance of Malayan railway

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Experimental demonstration of cost-Effective intensity-modulation and direct-detection optical fast-OFDM over 40km SMF transmission

We demonstrate the first experimental implementation of intensity-modulation and direct-detection 7.6Gb/s DBPSK-based DSB optical Fast-OFDM with a reduced subcarrier spacing equal to half of the symbol rate per subcarrier over 40km SMF. © 2012 OSA.

Gain switched multi-carrier transmitter and pilot tone based receiver for long reach access networks

A novel and cost effective long reach PON downlink scenario is proposed employing a multi-carrier transmitter and pilot tone aided direct detection at the receiver. Error free performance with QPSK and 50km transmission is presented. © 2012 OSA.

A unidirectional scheme for high-fidelity optical-carrier dissemination using phase-modulation, homodyne coherent-detection, and frequency entrainment

We report for the first time an ultra-stable optical-carrier dissemination technique for transmission over a 20km unidirectional fibre link. The optical-linewidth of the recovered carrier matches closely that of the original carrier. © 2014 OSA.

The General Differential Operators Generated by a Quasi-Differential Expressions with their Interior Singular Points

The general ordinary quasi-differential expression M of n-th order with complex coefficients and its formal adjoint M + are considered over a regoin (a, b) on the real line, −∞ ≤ a < b ≤ ∞, on which the operator may have a finite number of singular points. By considering M over various subintervals on which singularities occur only at the ends, restrictions of the maximal operator generated by M in L2|w (a, b) which are regularly solvable with respect to the minimal operators T0 (M ) and T0 (M + ). In addition to direct sums of regularly solvable operators defined on the separate subintervals, there are other regularly solvable restrications of the maximal operator which involve linking the various intervals together in interface like style.

Introduction to data envelopment analysis and its applications

This chapter provides the theoretical foundation and background on Data Envelopment Analysis (DEA) method and some variants of basic DEA models and applications to various sectors. Some illustrative examples, helpful resources on DEA, including DEA software package, are also presented in this chapter. DEA is useful for measuring relative efficiency for variety of institutions and has its own merits and limitations. This chapter concludes that DEA results should be interpreted with much caution to avoid giving wrong signals and providing inappropriate recommendations.

A Note on Univalent Functions with Finitely many Coefficients

MSC 2010: 30C45

Energy-based damage and fracture framework for viscoelastic asphalt concrete

A framework based on the continuum damage mechanics and thermodynamics of irreversible processes using internal state variables is used to characterize the distributed damage in viscoelastic asphalt materials in the form of micro-crack initiation and accumulation. At low temperatures and high deformation rates, micro-cracking is considered as the source of nonlinearity and thus the cause of deviation from linear viscoelastic response. Using a non-associated damage evolution law, the proposed model shows the ability to describe the temperature-dependent processes of micro-crack initiation, evolution and macro-crack formation with good comparison to the material response in the Superpave indirect tensile (IDT) strength test.

Towards asphalt mixture morphology evaluation with the virtual specimen approach

The morphology of asphalt mixture can be defined as a set of parameters describing the geometrical characteristics of its constituent materials, their relative proportions as well as spatial arrangement in the mixture. The present study is carried out to investigate the effect of the morphology on its meso- and macro-mechanical response. An analysis approach is used for the meso-structural characterisation based on the X-ray computed tomography (CT) data. Image processing techniques are used to systematically vary the internal structure to obtain different morphology structures. A morphology framework is used to characterise the average mastic coating thickness around the main load carrying structure in the structures. The uniaxial tension simulation shows that the mixtures with the lowest coating thickness exhibit better inter-particle interaction with more continuous load distribution chains between adjacent aggregate particles, less stress concentrations and less strain localisation in the mastic phase.