Tumor progression in hepatocellular carcinoma: Relationship with tumor stroma and parenchymal disease

Background: Encapsulation in hepatocellular carcinoma is associated with decreased invasiveness and improved survival in several series. Although active fibrogenesis by myofibroblasts has been demonstrated in the capsule, it is unclear if the capsule results from a general increase in peritumoral fibrosis, or an inherently less invasive tumor phenotype. The relationship between collagen deposition within tumor stroma, presence of cirrhosis and invasiveness also needs clarification. Methods: We performed immunohistochemistry for collagens I, III, IV and VI on sections of encapsulated and non-encapsulated hepatocellular carcinoma, arising in cirrhotic and non-cirrhotic livers. Staining was graded semi-quantitatively in tumor stromal elements and adjacent parenchymal sinusoids. The relationship of this staining with encapsulation, cirrhosis, and vascular invasion was analyzed. Results: Formation of a discrete capsular layer was associated with reduced vascular invasion, but not with a pervasive increase in peritumoral fibrosis. Increased collagen I content of tumor stroma and adjacent parenchymal sinusoids was associated with non-encapsulated tumors and vascular invasion. The presence of cirrhosis had little effect on capsule composition. Conclusions: Encapsulation of hepatocellular carcinoma reflects reduced invasiveness, rather than increased peritumoral collagen synthesis, which may instead enhance invasion. Increased intratumoral collagen I protein is also associated with increased tumor invasiveness. Pre-existing cirrhosis has little effect on tumor progression, possibly because the characteristics of cirrhosis are overwhelmed by tumor-induced changes in the adjacent parenchyma.(C) 2003 Blackwell Publishing Asia Pty Ltd.

Life history parameters and biocontrol potential of the mealybug parasitoid Coccidoxenoides peregrinus (Timberlake) (Hymenoptera: Encyrtidae): Asexuality, fecundity and ovipositional patterns

Properties relevant to the ovipositional activity and lifetime productivity of Coccidoxenoides peregrinus (Timberlake) were assessed in the laboratory, to determine the potential of this species as a biocontrol agent against the citrus mealybug, Planococcus citri (Risso). In general, this species has not performed well in orchards, except for a few localities on different continents. The mode of reproduction of C peregrinus is almost entirely thelytokous, with males produced sporadically and at low frequency. The females have both pro-ovigenic and synovigenic traits, which raises questions of the utility of this distinction. The females have a high reproductive potential with 10-20 eggs per day available within the first two days (after a short (12 h) pre-oviposition period), and 80-150 eggs per day thereafter until death at about eight days. Mean lifetime fecundity was 239.2 +/- 34.3 eggs. C peregrinus oviposits across a range of P. citri instars, but productivity relies predominantly on second instar hosts. Second stage (N2) hosts received most eggs in choice (about 52%) and no-choice (about 50%) tests. Most eggs deposited into N2 hosts (82%) reached adult stage whereas only a few of those deposited into N1 and N3 (about 5% each) developed successfully. The haemolymph of parasitised reproductive mealybugs contained granular structures and no parasitoid eggs were found 24 h after exposure to ovipositing wasps. Also, no wasps emerged from parasitised adult hosts that were kept alive. Parasitoid eggs deposited into adult hosts were presumed encapsulated and destroyed, as control mealybugs (not exposed to female wasps) had no granular structures in their haemolymph. Wasps exposed to an abundance of hosts soon started ovipositing, but only for a relatively short time each day (about 2.5 h out of a 7 h exposure). They stopped ovipositing despite eggs judged to be mature in their ovaries. The reproductive output of C peregrinus is discussed in relation to the ecological factors that could influence this output, and the implications for biocontrol are discussed. (C) 2003 Elsevier Inc. All rights reserved.

Incorporation of ovalbumin into ISCOMs and related colloidal particles prepared by the lipid film hydration method

The ann of this study was to investigate the incorporation of a model antigen, fluorescently labelled ovalbumin (FITC-OVA), into various colloidal particles including immune stimulating complexes (ISCOMs), liposomes, ring and worm-like micelles, lamellae and lipidic/layered structures that are formed from various combinations of the triterpene saponin Quil A, cholesterol and phosphatidylethanolamine (PE) following hydration of PE/cholesterol lipid films with aqueous Solutions of Quil A. Colloidal dispersions of these three components were also prepared by the dialysis method for comparison. FITC-OVA was conjugated with palmitic acid (P) and PE to produce P-FITC-OVA and PE-FITC-OVA, respectively. Both P-FITC-OVA and PE-FITC-OVA could be incorporated in all colloidal structures whereas FITC-OVA was incorporated only into liposomes. The incorporation of PE-FITC-OVA into all colloidal structures was significantly higher than P-FITC-OVA (P < 0.05). The degree of incorporation of protein was in the order: ring and worm-like micelles < liposomes and lipidic/layered structures < ISCOMs and lamellae. The incorporation of protein into the various particles prepared by the lipid film hydration method was similar to those for colloidal particles prepared by the dialysis method (provided both methods lead to the formation of the same colloidal structures). In the case of different colloidal structures arising due to the preparation method, differences in encapsulation efficiency were found (P < 0.05) for formulations with the same polar lipid composition. This study demonstrates that the various colloidal particles formed as a result of hydrating PE/cholesterol lipid films with different amounts of Quil A are capable of incorporating antigen, provided it is amphipathic. Some of these colloidal particles may be used as effective vaccine delivery systems. (C) 2004 Elsevier B.V. All rights reserved.

Application of microencapsulated flavor to extrusion product

Flavoring is still a difficult problem in the snack food industry because of the high volatility of flavors and their instability under extrusion condition. Although postextrusion added flavor is commonly used, it suffers from numerous drawbacks. Flavor losses at the exit die because flash distillation is a critical issue and can only be minimized by controlling the pressure difference at the end of the barrel and the exit die, which, however, affects other desirable product characteristics. Residence time distribution (RTD), as an important intermediate process variable that among others controls the extent of reactions, can also be a major determinant on flavor retention during extrusion. Encapsulation of flavors is a promising alternative to enhance the retention of preextrusion added flavor during extrusion. The capsules should withstand high temperature and shear conditions in, the extruder barrel. Various encapsulation techniques and their encapsulated flavor characteristics are illustrated.

The influence of coating materials on some properties of alginate beads and survivability of microencapsulated probiotic bacteria

The probiotics, Lactobacillus acidophilus 547, Bifidobacterium bifidum ATCC 1994, and Lactobacillus casei 01, were encapsulated into uncoated calcium alginate beads and the same beads were coated with three types of material, chitosan, sodium alginate, and poly-L-lysine in combination with alginate. The thickness of the alginate beads increased with the addition of coating materials. No differences were detectable in the bead strength by texture analysis or in the thickness of the beads with different types of coating materials by transmission electron microscopy. The survivability of three probiotics in uncoated beads, coated beads, and as free cells (unencapsulated) was conducted in 0.6% bile salt solution and simulated gastric juice (pH 1.55) followed by incubation in simulated intestinal juice with and without 0.6% bile salt. Chitosan-coated alginate beads provided the best protection for L. acidophilus and L. casei in all treatments. However, B. bifidum did not survive the acidic conditions of gastric juice even when encapsulated in coated heads. (C) 2004 Elsevier Ltd. All rights reserved.

Parasitization of Manduca sexta larvae by the parasitoid wasp Cotesia congregata induces an impaired host immune response

During oviposition, the parasitoid wasp Cotesia congregata injects polydnavirus, venom, and parasitoid eggs into larvae of its lepidopteran host.. the tobacco hornworm, Manduca sexta. Polydnaviruses (PDVs) suppress the immune system of the host and allow the juvenile parasitoids to develop without being encapsulated by host hemocytes mobilized by the immune system. Previous work identified a gene in the Cotesia rubecula PDV (CrV1) that is responsible for depolymerization of actin in hemocytes of the host Pieris rapae during a narrow temporal window from 4 to 8 h post-parasitization. Its expression appears temporally correlated with hemocyte dysfunction. After this time, the hemocytes recover, and encapsulation is then inhibited by other mechanism(s). In contrast, in parasitized tobacco hornworm larvae this type of inactivation in hemocytes of parasitized M. sexta larvae leads to irreversible cellular disruption. We have characterized the temporal pattern of expression of the CrV1-homolog from the C. congregata PDV in host fat body and hemocytes using Northern blots, and localized the protein in host hemocytes with polyclonal antibodies to CrV1 protein produced in P. rapae in response to expression of the CrV1 protein. Host hemocytes stained with FITC-labeled phalloidin, which binds to filamentous actin, were used to observe hemocyte disruption in parasitized and virus-injected hosts and a comparison was made to hemocytes of nonparasitized control larvae. At 24 h post-parasitization host hemocytes were significantly altered compared to those of nonparasitized larvae. Hemocytes front newly parasitized hosts displayed blebbing, inhibition of spreading and adhesion, and overall cell disruption. A CrV1-homolog gene product was localized in host hemocytes using polyclonal CrV1 antibodies, suggesting that CrV1-like gene products of C. congregata's bracovirus are responsible for the impaired immune response of the host. (C) 2005 Elsevier Ltd. All rights reserved.

Are insect immune suppressors driving cellular uptake reactions?

Many insect parasitoids that deposit their eggs inside immature stages of other insect species inactivate the cellular host defence to protect the growing embryo from encapsulation. Suppression of encapsulation by polydnavirus-encoded immune-suppressors correlates with specific alterations in hemocytes, mainly cytoskeletal rearrangements and actin-cytoskeleton breakdown. We have previously shown that the Cotesia rubecula polydnavirus gene product CrV1 causes immune suppression when injected into the host hemocoel. CrV1 is taken up by hemocytes although no receptors have been found to bind the protein. Instead CrV1 uptake depends on dimer formation, which is required for interacting with lipophorin, suggesting a CrV1-lipophorin complex internalisation by hemocytes. Since treatment of hemocytes with oligomeric lectins and cytochalasin D can mimic the effects of CrV1, we propose that some dimeric and oligomeric adhesion molecules are able to cross-link receptors on the cell surface and depolymerise actin by leverage-mediated clearance reactions in the hemolymph.

Emulsion strategies in the microencapsulation of cells: Pathways to thin coherent membranes

Microencapsulation of cell spheroids in an immunoselective, highly biocompatible, biomembrane offers a way to create viable implantation options in the treatment of insulin-dependent diabetes mellitus (IDDM). Traditionally the encapsulation process has been achieved through the injection/extrusion of alginate/cell mixtures into a calcium chloride solution to produce calcium alginate capsules around the cells. A novel alternative is explored here through a procedure using an emulsion process to produce thin adherent calcium alginate membranes around cell spheroids. In this study, a thorough investigation has been used to establish the emulsion process parameters that are critical to the formation of a coherent alginate coat both on a model spheroid system and subsequently on cell spheroids. Optical and fluorescence microscopy are used to assess the morphology and coherence of the calcium alginate/ poly-L-ornithine/alginate (APA) capsules produced. (c) 2005 Wiley Periodicals, Inc.

Periodic mesoporous organosilica hollow spheres with tunable wall thickness

Periodic mesoporous organosilica (PMO) hollow spheres with tunable wall thickness have been successfully synthesized by a new vesicle and a liquid crystal “dual templating” mechanism, which may be applicable for drug and DNA delivery systems, biomolecular encapsulation, as well as nanoreactors for conducting biological reactions at the molecular levels.

Nano-emulsion production by sonication and microfluidization - A comparison

The efficiency of sonication and microfluidization to produce nano-emulsions were evaluated in this study. The purpose was to produce an oil-in-water nano-emulsion of d-limonene to apply it in the next step for nano-particle encapsulation. In the entrapment and retention of volatiles or for the microencapsulation efficiency, emulsion size is one of the critical factors. In this study, a bench-top sonicator and an air-driven microfluidizer were used to prepare the emulsions. Results show that, while both methods were capable of producing nano-emulsions of the size range of 150-700 nm, the microfluidizer produced emulsions with narrower size distributions and sonication was more convenient in terms of operation and cleaning. In general, the size of the emulsions decreased with increasing sonication time, or the microfluidization pressure and duration. However, for both sonication and microfluidization, optimal conditions were necessary for emulsification beyond which the emulsion sizes would either increase or have little change with further processing.

Preparation of poly (alkylcyanoacrylate) nanoparticles by polymerization of water-free microemulsions

Phase diagrams of the pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and propylene glycol with and without butanol as a co-surfactant were prepared. Areas containing optically isotropic, one-phase systems were identified and samples therein designated as droplet, bicontinuous or solution type microemulsions using conductivity, viscosity and self-diffusion NMR. Nanoparticles were prepared by polymerization of selected microemulsions with ethyl-2-cyanoacrylate and the morphology of the particles was investigated. Addition of monomer to all types of microemulsions led to the formation of nanoparticles, which had an average size of 244 +/- 25 nm, an average polydispersity index of 0.15 +/- 0.04 and a zeta-potential of -17 +/- 3 mV. The formation of particles from water-free microemulsions of different types is surprising, particularly considering that polymerization is expected to occur at a water-oil interface by base-catalysed polymerization. It would appear that propylene glycol is sufficiently nucleophilic to initiate the polymerization. The use of water-free microemulsions as templates for the preparation of poly (alkylcyanoacrylate) nanoparticles opens up interesting opportunities for the encapsulation of bioactives which do not have suitable properties for encapsulation on the basis of water-containing microemulsions.

The effect of complexation on characteristics and drug release from PLGA microspheres loaded by cyclosporine-cyclodextrin complex

The purpose of this study was to evaluate the effect of cyclosporine (CyA)-cyclodextrin (CD) complex incorporated within PLGA inicrospheres on microsphere characteristics, with particular emphasis on drug release kinetics. For this purpose, microspheres encapsulated with CyA and those loaded by CyA-CD complex were prepared by solvent evaporation and multiple emulsification solvent evaporation methods, respectively. Morphology, size, encapsulation efficiency and drug release pattern from microspheres were evaluated. Also, physicochemical properties of drug inside microspheres were characterized by differential scanning calorimetry (DSC) and infrared spectroscopy (IR) studies. Scanning electron microscopy (SEM) studies showed that microspheres encapsulated with CyA had islands on the microsphere surface but the islands were not seen on the surface of microspheres loaded by complex. Size range varied from 1 to 25 mu m for CyA encapsulated microspheres and 1 to 50 mu m for complex loaded microspheres. The release of CyA was biphasic with an initial more rapid release phase followed by a slower phase but drug release was twice as fast for complex loaded microspheres. IR studies did not indicate any chemical interaction between the components of microspheres and DSC thermograms revealed that CyA was present either in its amorphous state in microspheres or the presence of CyA as an inclusion complex within microspheres loaded by complex. In conclusion, using CyA as an inclusion complex with CD within microspheres can affect microsphere characteristics and drug release and it is possible to modify microsphere properties like drug release by incorporating CDs as complexing agents.

A calreticulin-like protein from endoparasitoid venom fluid is involved in host hemocyte inactivation

During oviposition, most endoparasitoid wasps inject maternal factors into their hosts to interfere with host immune reactions and ensure successful development of their progeny. Since encapsulation is a major cellular defensive response of insects against intruding parasites, parasitoids have developed numerous mechanisms to suppress the host encapsulation capability by interfering with every step in the process, including recognition, adherence and spreading. In previous studies, components of Cotesia rubecula venom were shown to inhibit melanization of host hemolymph by interfering with the prophenoloxidase activation cascade and facilitate expression of polydnavirus genes. Here we report the isolation and characterization of another venom protein with similarity to calreticulin. Results indicate that C rubecula calreticulin (CrCRT) inhibits hemocyte spreading behavior, thus preventing encapsulation of the developing parasitoid. It is possible that the protein might function as an antagonist competing for binding sites with the host hemocyte calreticulin, which mediates early-encapsulation reactions. (c) 2005 Elsevier Ltd. All rights reserved.

Model-Driven safety evaluation with state-event-based component failure annotations

Over the past years, the paradigm of component-based software engineering has been established in the construction of complex mission-critical systems. Due to this trend, there is a practical need for techniques that evaluate critical properties (such as safety, reliability, availability or performance) of these systems. In this paper, we review several high-level techniques for the evaluation of safety properties for component-based systems and we propose a new evaluation model (State Event Fault Trees) that extends safety analysis towards a lower abstraction level. This model possesses a state-event semantics and strong encapsulation, which is especially useful for the evaluation of component-based software systems. Finally, we compare the techniques and give suggestions for their combined usage

What nominal phrases are all about: the atypical case of indefinite pronouns with a determiner

This paper presents novel data that challenge the traditional categorial understanding of the nominal phrase. The established use of an indefinite pronoun with a determiner in French (ce quelqu'un, du n'importe quoi, un je ne sais quoi) contravenes assumptions both about pronouns, which should not be embedded, and nominal phrases, which should be headed by a noun. Analysed here for the first time, the embedding of a pronoun under a determiner is shown to find its justification in the semantic import of the construction. The anaphoric role guaranteeing referential continuity is promoted by a strong determiner; weak determiners typically contribute to constructing a designative use of the pronoun when a more precise characterisation cannot or will not be provided. How this construction would be analysed in the Minimalist Programme is presented to suggest that the phrase satisfies semantic requirements, which resolves the paradoxes of its traditional definition