"Pilado add Value" - valorisation of non-traditional marine resources

Os subprodutos da pesca têm recebido maior atenção devido à perceção dos seus impactos negativos na economia e no ambiente. Contudo, os subprodutos de crustáceos contêm vários compostos que podem ser usados como fonte de biopolímeros, como por exemplo a quitina, tendo esta uma grande variedade de aplicações biotecnológicas. O caranguejo Polybius henslowii, é um recurso marinho extremamente abundante na costa oeste Portuguesa durante os meses de Verão, não sendo contudo aproveitada para fins comerciais. Com este estudo procura-se assim contribuir para a valorização económica deste recurso, como fonte de matéria-prima para a extração de polímeros visando aplicações biotecnológicos. Para avaliar o seu potencial, a quitina foi extraída e quitosano produzido, a partir de distintas partes do corpo de Polybius henslowii: pereópodes e carapaça. O quitosano obtido, serviu, por sua vez, de matéria-prima para a produção de quitosano solúvel em água (WSC) e oligomeros de quitosano (COS), tendo todas as amostras sido caracterizadas e testadas quanto às suas propriedades antibacteriana, antifúngica e antioxidante, redução do radical 1, 1-Difenil-2-picrilhidrazil (DPPH). A caracterização das amostras de quitosano obtidas a partir de ambos os segmentos, demonstraram diferenças quanto ao seu rendimento, peso molecular e viscosidade. Os oligomeros de quitosano (COS) revelaram atividade antibacteriana contra todas as bactérias Gram-negativas testadas e a Gram-positiva, Lactobacillus planctarum (ATCC8014). COS mostraram melhores resultados na concentração mínima inibitória do que WSC contra todos os microrganismos testados, com maior inibição de crescimento demonstrada para Escherichia coli (ATCC10536) entre as concentrações de 0.125-0.0625 mg/mL. Os oligomeros demonstraram também maior atividade na redução do radical DPPH e na atividade antifúngica contra quatro espécies de fungo. A maior capacidade de redução foi obtida pelas amostras de COS obtidos a partir de pereópodes e carapaças (40%) com 1mg/mL de amostra.A capacidade de inibição do crescimento das espécies de fungos testados provou ser maior também para as amostras de oligomeros, do que para o quitosano solúvel em água. A maior atividade observada foi conseguida pelas amostras de pCOS (oligomeros de quitosano de pereópodes) e cCOS (oligomeros de quitosano de carapaças) para Cryphonectria parasitica (DSMZ 62626) com 84.5±3.14% e 85.6±2.27%, respetivamente. Tendo por base os resultados obtidos, é possível concluir pelas características bioquímicas e propriedades biológicas deste recurso marinho não tradicional, Polybius henslowii, suportam a sua utilização por indústrias biotecnológicas, promovendo assim a sua valorização económica. A exploração desta espécie vítima de captura acidental pode também aumentar desta forma a competitividade da atividade pesqueira através da reorientação e diversificação das espécies alvo, com potencial impacto no desenvolvimento sustentável nas comunidades costeiras.

Ultra Compact Inline E-Plane Waveguide Bandpass Filters Using Cross Coupling

This paper presents novel ultra-compact waveguide bandpass filters that exhibit pseudo elliptic responses with ability to place transmission zeros on both sides of the passband to form sharp roll offs. The filters contain E plane extracted pole sections cascaded with cross-coupled filtering blocks. Compactness is achieved by the use of evanescent mode sections and closer arranged resonators modified to shrink in size. The filters containing non-resonating nodes are designed by means of the generalized coupling coefficients (GCC) extraction procedure for the cross-coupled filtering blocks and extracted pole sections. We illustrate the performance of the proposed structures through the design examples of a third and a fourth order filters with center frequencies of 9.2 GHz and 10 GHz respectively. The sizes of the proposed structures suitable for fabricating using the low cost E plane waveguide technology are 38% smaller than ones of the E plane extracted pole filter of the same order.

Highly linear reconfigurable UWB filters with independently controlled dual bandnotch

This letter proposes a high-linearity reconfigurable lower ultra-wideband (3.1–5.25 GHz) filter with independently controlled dual bandnotch at WiMAX 3.5 GHz band and satellite communication systems 4.2 GHz band. Reconfigurability has been achieved by the implementation of Graphene based switches (simulation only) and PIN diodes (measurements). The simulation and measurement results in OFF state show an entire bandpass response from 3.1 GHz to 5.25 GHz and with a very low insertion loss. In ON state, the results show that sharp rejections at 3.5 GHz and 4.2 GHz are achieved, with a low passband insertion loss. The two bandnotch operate independently of each other; thus allowing to control the behaviour of the required bandnotch. The third order intermodulation products were also measured in OFF and ON states and the linearity results have been presented. The filter is able to achieve a high performance with good linearity and no significant loss.

The Use of Almost Linear Phase IIR filters In DFT Modulated Filter Banks for Communication Systems

This paper is on the use and performance of M-path polyphase Infinite Impulse Response (IIR) filters for channelisation, conventionally where Finite Impulse Response (FIR) filters are preferred. This paper specifically focuses on the Discrete Fourier Transform (DFT) modulated filter banks, which are known to be an efficient choice for channelisation in communication systems. In this paper, the low-pass prototype filter for the DFT filter bank has been implemented using an M-path polyphase IIR filter and we show that the spikes present at the stopband can be avoided by making use of the guardbands between narrowband channels. It will be shown that the channelisation performance will not be affected when polyphase IIR filters are employed instead of their counterparts derived from FIR prototype filters. Detailed complexity and performance analysis of the proposed use will be given in this article.

Two-Path All-pass Based Half-Band Infinite Impulse Response Decimation Filters and the Effects of Their Non-Linear Phase Response on ECG Signal Acquisition

This paper is based on the novel use of a very high fidelity decimation filter chain for Electrocardiogram (ECG) signal acquisition and data conversion. The multiplier-free and multi-stage structure of the proposed filters lower the power dissipation while minimizing the circuit area which are crucial design constraints to the wireless noninvasive wearable health monitoring products due to the scarce operational resources in their electronic implementation. The decimation ratio of the presented filter is 128, working in tandem with a 1-bit 3rd order Sigma Delta (ΣΔ) modulator which achieves 0.04 dB passband ripples and -74 dB stopband attenuation. The work reported here investigates the non-linear phase effects of the proposed decimation filters on the ECG signal by carrying out a comparative study after phase correction. It concludes that the enhanced phase linearity is not crucial for ECG acquisition and data conversion applications since the signal distortion of the acquired signal, due to phase non-linearity, is insignificant for both original and phase compensated filters. To the best of the authors’ knowledge, being free of signal distortion is essential as this might lead to misdiagnosis as stated in the state of the art. This article demonstrates that with their minimal power consumption and minimal signal distortion features, the proposed decimation filters can effectively be employed in biosignal data processing units.

On the waterfront: neoliberal urbanism and the politics of public benefit

Dear Philip,

Thank you for adding your record to Pure. We notice that as of yet you have not uploaded your accepted manuscript for this publication.

As you may be aware HEFCE require that the accepted manuscripts of all journal articles and conference proceedings with an ISSN accepted from the 1st April 2016 are uploaded to Pure within 3 months of early online publication to ensure eligibility for the post 2014 REF.

The accepted manuscript is the final accepted version after changes from peer review have been incorporated. It is usually a Word or plain text file without publisher logos and prior to copy-editing and typesetting applied by the publisher.

If you have this version, I would be grateful if you could upload it to the record, selecting "Accepted author manuscript (post print)" from the document version drop down menu. If you have not done so already, please add your date of acceptance. Library staff will apply a copyright statement and any embargo required by the publisher.

Please contact me if you have any questions or require further information.

Kind regards,


Mark

Open Access Team

Low Pass Filters

Resources created at the University of Southampton for the module Remote Sensing for Earth Observation

High Pass Filters

Resources created at the University of Southampton for the module Remote Sensing for Earth Observation

Specific Filters Applied in Nuclear Medicine Services

In Nuclear Medicine, radioiodine, in various chemical forms, is a key tracer used in diagnostic practices and/or therapy. Due to its high volatility, medical professionals may incorporate radioactive iodine during the preparation of the dose to be administered to the patient. In radioactive iodine therapy doses ranging from 3.7 to 7.4GBq per patient are employed. Thus, aiming at reducing the risk of occupational contamination, we developed a low cost filter to be installed at the exit of the exhaust system where doses of radioactive iodine are fractionated, using domestic technology. The effectiveness of radioactive iodine retention by silver impregnated silica [10%] crystals and natural activated carbon was verified using radiotracer techniques. The results showed that natural activated carbon is effective for I2 capture for a large or small amount of substrate but its use is restricted due to its low flash point (150º C). Besides, when poisoned by organic solvents, this flash point may become lower, causing explosions if absorbing large amounts of nitrates. To hold the CH3I gas, it was necessary to increase the volume of natural activated carbon since it was not absorbed by SiO2 + Ag crystals. We concluded that, for an exhaust flow range of (306 4) m3/h, a double stage filter using SiO2 + Ag in the first stage and natural activated carbon in the second is sufficient to meet radiological safety requirements.

Employment of the Technique of Radiotracers for Analysis of Industrial Filters

The main aim of this work is to develop a methodology to evaluate the characteristics of porous media in filter using the radio-tracing technique. To do this, an experimental prototype filter made up of an acrylic cylinder, vertically mounted and supported on the lower side by a controlled leaking valve was developed. Two filters (spheres of acrylic and silica crystals) were used to check the movement of the water through the porous media using 123I in its MIBG (iodine-123-meta-iodo benzyl-guanidine) form. Further up the filter an instantaneous injection of the substance makes it possible to see the passage of radioactive clouds through the two scintillatory detectors NaI (2x2)” positioned before and immediately after the cylinder with the filtering element (porous media). The are caused by the detectors on the passage of the radioactive cloud are analyzed through statistical functions using the weighted moment method which makes it possible to calculate the Residence-Time (the amount of time the tracer takes to thoroughly pass through the filter) per the equation of dispersion in tubular flow and the one-directional flow of the radiotracer in the porous media.