Advances in understanding mineral dust and boundary layer processes over the Sahara from Fennec aircraft observations

The Fennec climate program aims to improve understanding of the Saharan climate system through a synergy of observations and modelling. We present a description of the Fennec airborne observations during 2011 and 2012 over the remote Sahara (Mauritania and Mali) and the advances in the understanding of mineral dust and boundary layer processes they have provided. Aircraft instrumentation aboard the UK FAAM BAe146 and French SAFIRE Falcon 20 is described, with specific focus on instrumentation specially developed and relevant to Saharan meteorology and dust. Flight locations, aims and associated meteorology are described. Examples and applications of aircraft measurements from the Fennec flights are presented, highlighting new scientific results delivered using a synergy of different instruments and aircraft. These include: (1) the first airborne measurement of dust particles sized up to 300 microns and associated dust fluxes in the Saharan atmospheric boundary layer (SABL), (2) dust uplift from the breakdown of the nocturnal low-level jet before becoming visible in SEVIRI satellite imagery, (3) vertical profiles of the unique vertical structure of turbulent fluxes in the SABL, (4) in-situ observations of processes in SABL clouds showing dust acting as CCN and IN at −15 °C, (5) dual-aircraft observations of the SABL dynamics, thermodynamics and composition in the Saharan heat low region (SHL), (6) airborne observations of a dust storm associated with a cold-pool (haboob) issued from deep convection over the Atlas, (7) the first airborne chemical composition measurements of dust in the SHL region with differing composition, sources (determined using Lagrangian backward trajectory calculations) and absorption properties between 2011 and 2012, (8) coincident ozone and dust surface area measurements suggest coarser particles provide a route for ozone depletion, (9) discrepancies between airborne coarse mode size distributions and AERONET sunphotometer retrievals under light dust loadings. These results provide insights into boundary layer and dust processes in the SHL region – a region of substantial global climatic importance.

'Nature concocts & expels': the agents and processes of recovery from disease in Early Modern England

The ‘golden saying’ in early modern medicine was ‘Nature is the healer of disease’. This article uncovers the meaning and significance of this forgotten axiom by investigating perceptions of the agents and physiological processes of recovery from illness in England, c.1580-1720. Drawing on sources such as medical texts and diaries, it shows that doctors and laypeople attributed recovery to three agents – God, Nature, and the practitioner. While scholars are familiar with the roles of providence and medicine, the vital agency of Nature has been overlooked. In theory, the agents operated in a hierarchy: Nature was ‘God’s instrument’, and the physician, ‘Nature’s servant’; but in practice the power balance was more ambivalent. Nature was depicted both as a housewife who cooked and cleaned the humours, and as a warrior, who defeated the disease. Through exploring these complex dynamics, the article sheds fresh light on concepts of gender, disease, and bodies.

Hybridization and introgression across different ploidy levels in the Neotropical orchids Epidendrum fulgens and E-puniceoluteum (Orchidaceae)

The hypothesis of gene flow between species with large differences in chromosome numbers has rarely been tested in the wild, mainly because species of different ploidy are commonly assumed to be reproductively isolated from each other because of instantaneous and strong postzygotic barriers. In this study, a broad-scale survey of molecular variation was carried out between two orchid species with different ploidy levels: Epidendrum fulgens (2n = 2x = 24 chromosomes) and Epidendrum puniceoluteum (2n = 4x = 52 chromosomes). To test the strength of their reproductive barriers, we investigated the distribution of genetic variation in sympatric and allopatric populations of these two species and conducted crossing experiments. Nuclear and plastid microsatellite loci were used to genotype 463 individuals from eight populations across the geographical range of both species along the Brazilian coastal plain. All six sympatric populations analysed presented hybrid zones, indicating that hybridization between E. fulgens and E. puniceoluteum is a common phenomenon. Bayesian assignment analysis detected the presence of F(1) and F(2) individuals and also signs of introgression, demonstrating a high potential for interspecific gene flow. Introgression occurs preferentially from E. fulgens to E. puniceoluteum. Pure parental individuals of both species display strong genotype-habitat associations, indicating that environment-dependent selection could be acting in all hybrid zones. This study suggests that hybridization and introgression are evolutionary processes playing a role in the diversification of Epidendrum and indicates the importance of investigations of hybrid zones in understanding reproductive barriers and speciation processes in Neotropical orchid species.

Fragment mass distributions in the fission of heavy nuclei by intermediate- and high-energy probes

Recent experiments have shown that the multimode approach for describing the fission process is compatible with the observed results. Asystematic analysis of the parameters obtained by fitting the fission-fragment mass distribution to the spontaneous and low-energy data has shown that the values for those parameters present a smooth dependence upon the nuclear mass number. In this work, a new methodology is introduced for studying fragment mass distributions through the multimode approach. It is shown that for fission induced by energetic probes (E > 30 MeV) the mass distribution of the fissioning nuclei produced during the intranuclear cascade and evaporation processes must be considered in order to have a realistic description of the fission process. The method is applied to study (208)Pb, (238)U, (239)Np and (241)Am fission induced by protons or photons.

Investigation of interfacial processes at tetraruthenated zinc porphyrin films using electrochemical surface plasmon resonance and electrochemical quartz crystal microbalance

In the present work we describe the investigation of interfacial and superficial processes on tetraruthenated zinc porphyrin (ZnTRP) films immobilized on gold electrode surface. In situ and real time measurements employing electrochemical surface plasmon resonance (ESPR)and electrochemical quartz crystal microbalance (EQCM) have given new insights into the electrochemical oxidation of ferrocyanide and phenolic compounds (acetaminophen, dopamine, and catechol) on ZnTRP modified electrodes. The decrease of diode like behavior in the presence of such phenolic species in contrast with ferrocyanide was clearly assigned to the inclusion of those species in the porphyrin film, creating new conduction pathways connecting the gold electrode surface with the film/solution interface. In fact, there are evidences that they can intercalate in the film (catechol > dopamine > acetaminophen), whereas ferrocyanide is completely excluded. Accordingly, the molecular size may play a fundamental role in such a process. (C) 2009 Published by Elsevier Ltd.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Where did all these books come from? The Publishing Industry and American Intellectual Life

The American book publishing industry shapes the character of American intellectual life. While the newspaper and television industries have been accused of and investigated for bias and lowering America’s intellectual standards, book publishing has gone largely unexamined by scholars. The existing studies of the publishing industry have focused on finance, procedure and history. “There are few ‘theories’ of publishing – efforts to understand the ‘whys’ as well as the ‘hows.’ Few scholarly scientists have devoted significant scholarly attention to publishing” (Altbach and Hoshino, xiii). There are many possible reasons for this lacuna. First, there is a perception that books have always been around, that they are an “old” technology and therefore they don’t appear to have had as much of an impact on our society as television and other media (which were developed quickly and suddenly) seem to have had (Altbach and Hoshino, xiv). Also, despite books’ present and past popularity, television, radio, and now the internet reach more people more easily, and are therefore more topical points of study and observation. In studying the effects of mass media on everyday American life, television and the internet may be the most logical points of study. Regarding public intellectual life however, books play a much more important role. Public intellectual life has always been associated with independent thinkers publishing their work for the masses. For this reason, this I focus on trade publishing. Trade publishing produces fiction and non-fiction works for the general reading public, as opposed to technical manuals, textbooks, and other fiction and nonfiction books targeted to small and specific audiences. Although, quantitatively speaking, “the largest part of book publishing business is embodied in that great complex of companies and activities producing educational, business, scientific, technical, and reference books and materials,” (Tebbel 1987, 439) the trade industry publishes most of the books that most people read. It is the most public segment of the industry, and the most likely place to find public intellectualism. Trade publishing is not only the most public segment of the industry, but it is also the most susceptible to corruption and lowered intellectual standards. Unlike specialty publishing, which caters to a specific, known segment of society, trade publishers must compete with countless other publications, as well as with other forms of media, for the patronage of the general public. As John Tebbel (author of a widely referenced history of the publishing industry) puts it, “The textbook, scientific, or technical book is subjected to much more rigorous scrutiny by buyers and users, and in an intensively competitive market inferior products are quickly lost" (Tebbel 1987, xiv). Since the standards for trade publishing are not nearly as specific – trade books simply need to catch the attention of a significant number of readers, they don’t have to measure up to a given level of quality – the quality of trade books is much more variable. And yet, a successful trade publication can have a much greater impact on society than the most rigorously researched and edited textbook or scholarly study.

Impact of successive sugarcane harvests and trash management practices on soil microbiological properties

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapping of quantitative trait loci controlling tick [Riphicephalus (Boophilus) microplus] resistance on bovine chromosomes 5, 7 and 14

Differences in domestication and selection processes have contributed to considerable phenotypic and genotypic differences between Bos taurus and Bos indicus cattle breeds. of particular interest in tropical and subtropical production environments are those genetic differences between subspecies that underlie the phenotypic extremes in tolerance and susceptibility to parasite infection. In general, B. taurus cattle are more susceptible to ectoparasites than B. indicus cattle in tropical environments, and much of this difference is under genetic control. To identify genomic regions involved in tick resistance, we developed a B. taurus x B. indicus F-2 experimental population to map quantitative trait loci (QTL) for resistance to the Riphicephalus (Boophilus) microplus tick. About 300 individuals were measured for parasite load in two seasons (rainy and dry) and genotyped for 23 microsatellite markers covering chromosomes 5, 7 and 14. We mapped a suggestive chromosome-wide QTL for tick load in the rainy season (P < 0.05) on chromosome 5. For the dry season, suggestive (P < 0.10) chromosome-wide QTL were mapped on chromosomes 7 and 14. The additive effect of the QTL on chromosome 14 corresponds to 3.18% of the total observed phenotypic variance. Our QTL-mapping study has identified different genomic regions controlling tick resistance; these QTL were dependent upon the season in which the ticks were counted, suggesting that the QTL in question may depend on environmental factors.

Application of Polysaccharide Hydrogels in Adsorption and Controlled-Extended Release of Fertilizers Processes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Helicobacter pylori infection: Host immune response, implications on gene expression and microRNAs

Helicobacter pylori (H. pylori) infection is the most common bacterial infection worldwide. Persistent infection of the gastric mucosa leads to inflammatory processes and may remain silent for decades or progress causing more severe diseases, such as gastric adenocarcinoma. The clinical consequences of H. pylori infection are determined by multiple factors, including host genetic predisposition, gene regulation, environmental factors and heterogeneity of H. pylori virulence factors. After decades of studies of this successful relationship between pathogen and human host, various mechanisms have been elucidated. In this review, we have made an introduction on H. pylori infection and its virulence factors, and focused mainly on modulation of host immune response triggered by bacteria, changes in the pattern of gene expression in H. pylori-infected gastric mucosa, with activation of gene transcription involved in defense mechanisms, inflammatory and immunological response, cell proliferation and apoptosis. We also highlighted the role of bacteria eradication on gene expression levels. In addition, we addressed the recent involvement of different microRNAs in precancerous lesions, gastric cancer, and inflammatory processes induced by bacteria. New discoveries in this field may allow a better understanding of the role of major factors involved in the pathogenic mechanisms of H. pylori. (C) 2014 Baishideng Publishing Group Co., Limited. All rights reserved.

Metacommunity organisation, spatial extent and dispersal in aquatic systems: patterns, processes and prospects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Post-conventional Political Cultures via Processes of Direct Democracy: Theoretical Considerations Based on Jurgen Habermas and Lawrence Kohlberg

In this article, it is proposed to differentiate political cultures in two dimensions. First, inspired by Habermas' distinction of the contents of discourse, a distinction is suggested between moral, ethical-political and pragmatic elements of political culture as well as of an element of culture of balancing interests. Second, inspired by Kohlberg's stage models for the development of the individual moral consciousness and for moral culture, a distinction is similarly suggested between two pre-conventional, two conventional and two post-conventional collective stages of political culture. It can be shown that from a normative point of view, only deliberations made in a post-conventional political culture can produce reasonable or at least fair results. Conceptual considerations indicate processes of direct democracy as the method for promoting post-conventional political cultures. The more liberty that the citizens have to formulate and trigger processes of direct democracy, the more one can expect from them to generate post-conventional political cultures.

Application of Polysaccharide Hydrogels in Adsorption and Controlled-Extended Release of Fertilizers Processes

This article studied the applicability of poly(acrylamide) and methylcellulose (PAAm-MC) hydrogels as potential delivery vehicle for the controlled-extended release of ammonium sulfate (NH(4))(2)SO(4) and potassium phosphate (KH(2)PO(4)) fertilizers. PAAm-MC hydrogels with different acrylamide (AAm) and MC concentrations were prepared by a free radical polymerization method. The adsorption and desorption kinetics of fertilizers were determined using conductivity measurements based on previously built analytical curve. The addition of MC in the PAAm chains increased the quantities of (NH(4))(2)SO(4) and KH(2)PO(4) loaded and extended the time and quantities of fertilizers released. Coherently, both loading and releasing processes were strongly influenced by hydrophilic properties of hydrogels (AAm/MC mass proportion). The best sorption (124.0 mg KH(2)PO(4)/g hydrogel and 58.0 mg (NH(4))(2)SO(4)/g hydrogel) and desorption (54.9 mg KH(2)PO(4)/g hydrogel and 49.5 mg (NH(4))(2)SO(4)/g hydrogel) properties were observed for 6.0% AAm-1.0% MC hydrogels (AAm/MC mass proportion equal 6), indicating that these hydrogels are potentially viable to be used in controlled-extended release of fertilizers systems. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 123: 2291-2298, 2012

The secrets of publishing your article in Journal of Geophysical Research (Oceans)

[EN] The editorial and review processes along the road to publication are described in general terms. The construction of a well-prepared article and the manner in which authors may maximise the chances of success at each stage of the process towards final publication are explored. The most common errors and ways of avoiding them are outlined. Typical problems facing an author writing in English as a second language, including the need for grammatical precision and appropriate style, are discussed. Additionally, the meaning of plagiarism, self-plagiarism and duplicate publication is explored. Critical steps in manuscript preparation and response to reviews are examined. Finally, the relation between writing and reviewing is outlined, and it is shown how becoming a good reviewer helps in becoming a successful author