926 resultados para 040601 Geomorphology and Regolith and Landscape Evolution
Resumo:
In this paper we study the commuting and moving decisions of workers in Catalonia (Spain) and its evolution in the 1986-1996 period. Using a microdata sample from the 1991 Spanish Population Census, we estimate a simultaneous, discrete choice model of commuting and moves, thus indirectly addressing the home and job location decisions. The econometrical framework is a simultaneous, binary probit model with a commute equation and a move equation
Resumo:
Diffeomorphism-induced symmetry transformations and time evolution are distinct operations in generally covariant theories formulated in phase space. Time is not frozen. Diffeomorphism invariants are consequently not necessarily constants of the motion. Time-dependent invariants arise through the choice of an intrinsic time, or equivalently through the imposition of time-dependent gauge fixation conditions. One example of such a time-dependent gauge fixing is the Komar-Bergmann use of Weyl curvature scalars in general relativity. An analogous gauge fixing is also imposed for the relativistic free particle and the resulting complete set time-dependent invariants for this exactly solvable model are displayed. In contrast with the free particle case, we show that gauge invariants that are simultaneously constants of motion cannot exist in general relativity. They vary with intrinsic time.
Resumo:
Introduction.- Pain and beliefs have an influence on the patient's course in rehabilitation and their relationships are complex. The aim of this study was to understand the relationships between pain at admission and the evolution of beliefs during rehabilitation as well as the relationships between pain and beliefs one year after rehabilitation.Patients and methods.- Six hundred and thirty-one consecutive patients admitted in rehabilitation after musculoskeletal trauma, were included and assessed at admission, at discharge and one year after discharge. Pain was measured by VAS (Visual Analogical Scale) and beliefs by judgement on Lickert scales. Four kinds of beliefs were evaluated: fear of a severe origin of pain, fear of movement, fear of pain and feeling of distress (loss of control). The association between pain and beliefs was assessed by logistic regressions, adjusted for gender, age, native language, education and bio-psycho-social complexity.Results.- At discharge, 44% of patients felt less distressed by pain, 34% are reinsured with regard to their fear of a severe origin of pain, 38% have less fear of pain and 33% have less fear of movement. The higher the pain at admission, the higher the probability that the distress diminished, this being true up to a threshold (70 mm/100) beyond which there was a plateau. At one year, the higher the pain, the more dysfunctional the fears.Discussion.- The relationships between pain and beliefs are complex and may change all along rehabilitation. During hospitalization, one could hope that the patient would be reinsured and would gain self-control again, if pain does not exceed a certain threshold. After one year, high pain increases the risk of dysfunctional beliefs. For clinical practice, these data suggest to think in terms of the more accessible "entrance door", act against pain and/or against beliefs, adpated to each patient.
Resumo:
In order to study the connections between Lagrangian and Hamiltonian formalisms constructed from aperhaps singularhigher-order Lagrangian, some geometric structures are constructed. Intermediate spaces between those of Lagrangian and Hamiltonian formalisms, partial Ostrogradskiis transformations and unambiguous evolution operators connecting these spaces are intrinsically defined, and some of their properties studied. Equations of motion, constraints, and arbitrary functions of Lagrangian and Hamiltonian formalisms are thoroughly studied. In particular, all the Lagrangian constraints are obtained from the Hamiltonian ones. Once the gauge transformations are taken into account, the true number of degrees of freedom is obtained, both in the Lagrangian and Hamiltonian formalisms, and also in all the intermediate formalisms herein defined.
Resumo:
The objective was to analyze the situation in Switzerland regarding the prevalence of overweight or obesity in children, adolescents and adults. The data were compared with France, an adjacent much larger country. The results showed that there is a definitive lack of objective information in Switzerland on the prevalence of obesity at different ages. As in other European studies, the fact that many national surveys are classically based on subject interviews (self-reported weights and heights rather than measured values) implies that the overweight/obesity prevalence is largely underestimated in adulthood. For example, in a recent Swiss epidemiological study, the prevalence of obesity (BMI greater than 30 kg/m(2)) averaged 6-7% in young men and women (25-34 y), the prevalence being underestimated by a factor of two to three when body weight was self-reported rather than measured. This phenomenon has already been observed in previous European studies. It is concluded that National Surveys based on telephone interviews generally produce biased obesity prevalence results, although the direction of the changes in prevalence of obesity and its evolution with repeated surveys using strict standardized methodology may be evaluated correctly. Therefore, these surveys should be complemented by large-scale epidemiological studies (based on measured anthropomeric variables rather than declared) covering the different linguistic areas of Switzerland. An epidemiological body weight (BMI) monitoring surveillance system, using a harmonized methodology among European countries, would help to accurately assess differences in obesity prevalence across Europe without methodological bias. It will permit monitoring of the dynamic evolution of obesity prevalence as well as the development of appropriate strategies (taking into account the specificity of each country) for obesity prevention and treatment.
Resumo:
The discovery of exhumed continental mantle and hyper-extended crust in present-day magma-poor rifted margins is at the origin of a paradigm shift within the research field of deep-water rifted margins. It opened new questions about the strain history of rifted margins and the nature and composition of sedimentary, crustal and mantle rocks in rifted margins. Thanks to the benefit of more than one century of work in the Alps and access to world-class outcrops preserving the primary relationships between sediments and crustal and mantle rocks from the fossil Alpine Tethys margins, it is possible to link the subsidence history and syn-rift sedimentary evolution with the strain distribution observed in the crust and mantle rocks exposed in the distal rifted margins. In this paper, we will focus on the transition from early to late rifting that is associated with considerable crustal thinning and a reorganization of the rift system. Crustal thinning is at the origin of a major change in the style of deformation from high-angle to low-angle normal faulting which controls basin-architecture, sedimentary sources and processes and the nature of basement rocks exhumed along the detachment faults in the distal margin. Stratigraphic and isotopic ages indicate that this major change occurred in late Sinemurian time, involving a shift of the syn-rift sedimentation toward the distal domain associated with a major reorganization of the crustal structure with exhumation of lower and middle crust. These changes may be triggered by mantle processes, as indicated by the infiltration of MOR-type magmas in the lithospheric mantle, and the uplift of the Brianconnais domain. Thinning and exhumation of the crust and lithosphere also resulted in the creation of new paleogeographic domains, the Proto Valais and Liguria-Piemonte domains. These basins show a complex, 3D temporal and spatial evolution that might have evolved, at least in the case of the Liguria-Piemonte basin, in the formation of an embryonic oceanic crust. The re-interpretation of the rift evolution and the architecture of the distal rifted margins in the Alps have important implications for the understanding of rifted margins worldwide, but also for the paleogeographic reconstruction of the Alpine domain and its subsequent Alpine compressional overprint.
Resumo:
A high-resolution U-Pb zircon geochronological study of plutonic units along the south Peruvian margin between 17 degrees and 18 degrees S allows the integration of the geochemical, geodynamic and tectonic evolution of this part of the Andean margin. This study focuses on the composite Jurassic-early Cretaceous Ilo Batholith that was emplaced along the southern Peruvian coast during two episodes of intrusive magmatism; a first period between 173 and 152 Ma (with a peak in magmatic activity between roughly 168 and 162 Ma) and a second period between 110 and 106 Ma. Emplacement of the Jurassic part of the composite Ilo Batholith shortly post-dated the accumulation of the volcanosedimentary succession it intruded (Chocolate formation), which allows to estimate a subsidence rate for this unit of similar to 3.5 km/Ma. The emplacement of the main peak of Jurassic plutonism of the Ilo Batholith was also closely coeval with widespread and repeated slumping (during deposition of the Cachios Formation) in the back-arc region, suggesting a common causal link between these phenomena, which is discussed in the context of an observed 100 km trenchward arc migration at similar to 175 Ma, and the relation with extensional tectonics that prevailed along the Central Andean margin during Pangaea break-up. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Application of semi-distributed hydrological models to large, heterogeneous watersheds deals with several problems. On one hand, the spatial and temporal variability in catchment features should be adequately represented in the model parameterization, while maintaining the model complexity in an acceptable level to take advantage of state-of-the-art calibration techniques. On the other hand, model complexity enhances uncertainty in adjusted model parameter values, therefore increasing uncertainty in the water routing across the watershed. This is critical for water quality applications, where not only streamflow, but also a reliable estimation of the surface versus subsurface contributions to the runoff is needed. In this study, we show how a regularized inversion procedure combined with a multiobjective function calibration strategy successfully solves the parameterization of a complex application of a water quality-oriented hydrological model. The final value of several optimized parameters showed significant and consistentdifferences across geological and landscape features. Although the number of optimized parameters was significantly increased by the spatial and temporal discretization of adjustable parameters, the uncertainty in water routing results remained at reasonable values. In addition, a stepwise numerical analysis showed that the effects on calibration performance due to inclusion of different data types in the objective function could be inextricably linked. Thus caution should be taken when adding or removing data from an aggregated objective function.
Resumo:
The formation and structural evolution of the jungrau syncline is described, based on excellent outcrops occurring in the lotschental, in the central alps of switzerland. the quality of the outcrops allows us to demonstrate that the external massifs of the swiss alps have developed due to internal folding. The jungfrau suncline, which separates the autochtonous gastern dome from the aar massif basement gneiss folds, is composed of slivers of basement rocks with their mesozoic sedimentary cover. in the inner faflertal, a side valley of the lotschental, the 200 m thick syncline cp, roses fpir imots, the gastern massif with a reduced mesozoic sedimentary cover in a normal stratigraphic succession, two units of overturned basement rocks with their mesozoic sedimentary cover, and the overturned lower limn of the tschingelhorn gneiss fold of the aar massif with lenses of its sedimentary cover. stratigraphy shows that the lower units, related to the gastern massis, are condensed and that the upper units, deposited farther away from a gastern paleo-high, form a more complete sequence, linked to the doldenhorn meso-cneozoic basin fill. the integration of these local observations with published regional data leads to the following model. on the northern margin of the doldenhorn hbasin, at the northern fringe of the alpine tethuys, the pre-triassic crystalline basement and its mesozoic sedimentary cover were folded by ductile deformation at temperatures above 300 degrees C and in the presence of high fluid pressures, as the helveti c and penninic nappes were overthrusted towards the northwest during the main alpine deformation phase, the visosity contrast between the basement gneisses and the sediments caused the formation of large basement anticlines and tight sedimentary sunclines (mullion-type structures). The edges of basement blocks bounded buy pre-cursor se-dipping normal faults at the northwestern border of the doldenhorn basin were deformed bu simple shear, creating overturned slices of crystalline rocks with their sedimentary cover in what now forms the hungfrau syncline. the localisation of ductile deformation in the vicinity of pre-existing se-dipping faults is thought to have been helped by the circulation of fluids along the faults; these fluids would have been released from the mesozoic sediments by metamorphic dehydration reactions accompanied by creep and dynamic recrystallisation of quartz at temperatures above 300 degrees C. Quantification of the deformation suggests an strain ellipsoid with a ratio (1 + e(1)/+ e(3)) of approximately 1000. The jungfrau suncline was deformed bu more brittle nw-directed shear creating well-developed shear band cleavages at a late stage, after cooling by uplift and erosion. It is suggested that the external massifs of the apls are basement gneiss folds created at temperatures of 300 degrees C by detachment through ductile deformation of the upper crust of the european plate as it was underthrusted below the adriatic plate.
Resumo:
Cell-wall mechanical properties play a key role in the growth and the protection of plants. However, little is known about genuine wall mechanical properties and their growth-related dynamics at subcellular resolution and in living cells. Here, we used atomic force microscopy (AFM) stiffness tomography to explore stiffness distribution in the cell wall of suspension-cultured Arabidopsis thaliana as a model of primary, growing cell wall. For the first time that we know of, this new imaging technique was performed on living single cells of a higher plant, permitting monitoring of the stiffness distribution in cell-wall layers as a function of the depth and its evolution during the different growth phases. The mechanical measurements were correlated with changes in the composition of the cell wall, which were revealed by Fourier-transform infrared (FTIR) spectroscopy. In the beginning and end of cell growth, the average stiffness of the cell wall was low and the wall was mechanically homogenous, whereas in the exponential growth phase, the average wall stiffness increased, with increasing heterogeneity. In this phase, the difference between the superficial and deep wall stiffness was highest. FTIR spectra revealed a relative increase in the polysaccharide/lignin content.
Resumo:
Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Flood effectiveness observations imply that two families of processes describe the formation of debris flow volume. One is related to the rainfall?erosion relationship, and can be seen as a gradual process, and one is related to additional geological/geotechnical events, those named hereafter extraordinary events. In order to discuss the hypothesis of coexistence of two modes of volume formation, some methodologies are applied. Firstly, classical approaches consisting in relating volume to catchments characteristics are considered. These approaches raise questions about the quality of the data rather than providing answers concerning the controlling processes. Secondly, we consider statistical approaches (cumulative number of events distribution and cluster analysis) and these suggest the possibility of having two distinct families of processes. However the quantitative evaluation of the threshold differs from the one that could be obtained from the first approach, but they all agree in the sense of the coexistence of two families of events. Thirdly, a conceptual model is built exploring how and why debris flow volume in alpine catchments changes with time. Depending on the initial condition (sediment production), the model shows that large debris flows (i.e. with important volume) are observed in the beginning period, before a steady-state is reached. During this second period debris flow volume such as is observed in the beginning period is not observed again. Integrating the results of the three approaches, two case studies are presented showing: (1) the possibility to observe in a catchment large volumes that will never happen again due to a drastic decrease in the sediment availability, supporting its difference from gradual erosion processes; (2) that following a rejuvenation of the sediment storage (by a rock avalanche) the magnitude?frequency relationship of a torrent can be differentiated into two phases, the beginning one with large and frequent debris flow and a later one with debris flow less intense and frequent, supporting the results of the conceptual model. Although the results obtained cannot identify a clear threshold between the two families of processes, they show that some debris flows can be seen as pulse of sediment differing from that expected from gradual erosion.
Resumo:
The species of the common shrew (Sorex araneus) group are morphologically very similar, but have undergone a spectacular chromosomal evolution. We investigate here the evolutionary history of the Sorex araneus group distributed in western Europe. In particular, we clarify the position of a difficult species, S. granarius, using sex-specific (mtDNA and Y-chromosome) markers. The karyotype of S. granarius is generally considered similar to the common ancestor of the restricted group considered here. The mtDNA data (1.4 kb) confirms the close relationship between S. granarius and S. araneus sensu stricto (hereafter S. araneus s.s.), but the Y-chromosome (3.4 kb) produces a quite different picture: S. granarius is closely related to another species, S. coronatus. Comparison of mtDNA and Y-chromosome phylogenies suggests that the genetic and chromosomal evolution in this group are disconnected processes. The evolutionary history of the south-western European populations of the S. araneus group can only be understood considering secondary contacts between taxa after their divergence, implying genetic exchanges by means of hybridization and/or introgression.
Resumo:
Résumé : La production de nectar assure aux plantes entomophiles un important succès reproducteur. Malgré cela, de nombreuses espèces d'orchidées ne produisent pas de nectar. La majorité de ces orchidées dites trompeuses exploitent simplement l'instinct des pollinisateurs généralistes, qui les pousse à chercher du nectar dans les fleurs. Afin d'optimiser la récolte de nectar, les pollinisateurs apprennent à différencier les fleurs trompeuses des nectarifères, et à concentrer leurs visites sur ces dernières, au détriment des plantes trompeuses. Chez les orchidées non autogames, la reproduction est assurée uniquement par les pollinisateurs. L'apprentissage des pollinisateurs a donc un impact négatif sur la reproduction des orchidées trompeuses. Cependant, les caractéristiques d'une espèce trompeuse et des espèces nectarifères au sein d'une communauté végétale peuvent affecter l'apprentissage et le taux de visite des pollinisateurs aux plantes trompeuses. J'ai réalisé des expériences en milieu naturel et en milieu contrôlé, pour déterminer si les caractéristiques florales, spatiales et temporelles des communautés affectent le taux de visite et le succès reproducteur de plantes trompeuses. Une agrégation spatiale élevée des plantes trompeuses et des plantes nectarifères diminue le succès reproducteur des plantes trompeuses. De plus, les pollinisateurs visitent plus souvent l'espèce trompeuse Iorsque ses fleurs sont de couleur similaire à celles de l'espèce nectarifère. Cet effet bénéfique de la similarité pour la couleur des fleurs s'accentue si les deux espèces sont mélangées et proches spatialement, ou si l'espèce trompeuse fleurit après l'espèce nectarifère. Enfin, le comportement des pollinisateurs n'est pas tout de suite affecté lorsque les caractéristiques de la communauté changent. Les caractéristiques des communautés végétales affectent donc la reproduction des espèces trompeuses. Bien que L'absence de coûts associés à la production de nectar, l'exportation efficace de pollen et la production de graines de qualité dont bénéficient les orchidées trompeuses favorisent Ieur maintien, les caractéristiques de la communauté peuvent aussi y contribuer. Mon étude fournit donc une explication alternative et complémentaire au maintien des orchidées trompeuses. Je conclus par une discussion des implications possibles de ces résultats sur le maintien et l'évolution des orchidées trompeuses, en tenant compte de la dynamique des caractéristiques des communautés végétales naturelles. Abstract : Despite the importance of producing food to ensure a high reproductive success, many orchid species lack such rewards. The majority of deceptive orchids simply exploit the instinctive food-foraging behaviour of generalist pollinators. This strategy is termed generalized food deception. To optimize their foraging efficiency, pollinators can learn to discriminate deceptive from rewarding flowers and to focus their visits to the rewarding plants, to the disadvantage of the deceptive plants. Because the reproductive success of non-autogamous orchids entirely relies on pollinator visitation rate, pollinator learning decreases the reproductive success of deceptive orchids. However, the characteristics of deceptive and rewarding plants within a community may affect pollinator learning and visitation rate to a deceptive orchid. Therefore, the biological characteristics of natural plant communities may be crucial to the maintenance of generalized food deceptive orchids. My study focused on the floral, spatial and temporal characteristics of plant communities. I used both in and ex sitar experiments to investigate whether these characteristics influence pollinator visitation rates and the reproductive success of deceptive orchids. A high spatial aggregation of both deceptive and rewarding species decreased the reproductive success of the deceptive species. Also, being of similar flower colour to rewarding sympatric species increased pollinator visitation rates to a deceptive species. The beneficial effect of flower colour similarity was even more pronounced when both species were spatially closely mingled or when the deceptive species flowered after the rewarding species. Finally, pollinator behaviour was unaffected in the short term by a change in the characteristics of plant communities, indicating that pollinators need time to learn under new conditions. Thus, the characteristics of plant communities may crucially affect the reproductive success of deceptive orchids. Although the absence of costs associated with nectar production, the efficient pollen export and the high seed quality of deceptive orchids may favour their maintenance, the characteristics of plant communities may also contribute to it. Therefore, my study provides an alternative yet complementary explanation to the maintenance of generalized food deceptive orchids in natural populations. I discuss the possible implications for the maintenance and the evolution of generalized food deceptive orchids with regards to the floral and temporal dynamics of natural plant communities.
Resumo:
BACKGROUND AND AIMS: The genus Olea (Oleaceae) includes approx. 40 taxa of evergreen shrubs and trees classified in three subgenera, Olea, Paniculatae and Tetrapilus, the first of which has two sections (Olea and Ligustroides). Olive trees (the O. europaea complex) have been the subject of intensive research, whereas little is known about the phylogenetic relationships among the other species. To clarify the biogeographical history of this group, a molecular analysis of Olea and related genera of Oleaceae is thus necessary. METHODS: A phylogeny was built of Olea and related genera based on sequences of the nuclear ribosomal internal transcribed spacer-1 and four plastid regions. Lineage divergence and the evolution of abaxial peltate scales, the latter character linked to drought adaptation, were dated using a Bayesian method. KEY RESULTS: Olea is polyphyletic, with O. ambrensis and subgenus Tetrapilus not sharing a most recent common ancestor with the main Olea clade. Partial incongruence between nuclear and plastid phylogenetic reconstructions suggests a reticulation process in the evolution of subgenus Olea. Estimates of divergence times for major groups of Olea during the Tertiary were obtained. CONCLUSIONS: This study indicates the necessity of revising current taxonomic boundaries in Olea. The results also suggest that main lines of evolution were promoted by major Tertiary climatic shifts: (1) the split between subgenera Olea and Paniculatae appears to have taken place at the Miocene-Oligocene boundary; (2) the separation of sections Ligustroides and Olea may have occurred during the Early Miocene following the Mi-1 glaciation; and (3) the diversification within these sections (and the origin of dense abaxial indumentum in section Olea) was concomitant with the aridification of Africa in the Late Miocene.