Nonlinear models for lateral dynamics of railway vehicles on bridges subject to wind action

The study of lateral dynamics of running trains on bridges is of importance mainly for the safety of the traffic, and may be relevant for laterally compliant bridges. These studies require threedimensional coupled vehicle-bridge models, wheree consideration of wheel to rail contact is a key aspect. Furthermore, an adequate evaluation of safety of rail traffic requires nonlinear models. A nonlinear coupled model is proposed here for vehicle-structure vertical and lateral dynamics. Vehicles are considered as fully three-dimensional multibody systems including gyroscopic terms and large rotation effects. The bridge structure is modeled by means of finite elements which may be of beam, shell or continuum type and may include geometric or material nonlinearities. The track geometry includes distributed track alignment irregularities. Both subsystems (bridge and vehicles) are described with coordinates in absolute reference frames, as opposed to alternative approaches which describe the multibody system with coordinates relative to the base bridge motion. The wheelrail contact employed is a semi-Hertzian model based on realistic wheel-rail profiles. It allows a detailed geometrical description of the contact patch under each wheel including multiple-point contact, flange contact and uplift. Normal and tangential stresses in each contact are integrated at each time-step to obtain the resultant contact forces. The models have been implemented within an existing finite element analysis software with multibody capabilities, Abaqus (Simulia Ltd., 2010). Further details of the model are presented in Antolín et al. (2012). Representative applications are presented for railway vehicles under lateral wind action on laterally compliant viaducts, showing the relevance of the nonlinear wheel-rail contact model as well as the interaction between bridge and vehicle.

Estudio dinámico de cimentaciones en obras portuarias

Los diques de abrigo verticales son estructuras monolíticas que sirven para reflejar el oleaje creando, de este modo, una zona abrigada en el lado tierra. Son estructuras de contención de gravedad, es decir, su peso es el elemento resistente fundamental. Las solicitaciones sobre estas estructuras son de tipo dinámico (oleaje) y consisten, fundamentalmente, en un empuje frontal y una subpresión en la base que varían en el tiempo. Habitualmente, las acciones sobre los diques de abrigo se establecen mediante fórmulas empíricas, que se describen en la presente tesis si bien, para obras de especial importancia, suelen medirse en modelos reducidos de laboratorio. Cuando el cimiento en que han de apoyarse estas estructuras no presenta una resistencia al corte suficiente, el apoyo se realiza en banquetas que redistribuyen la carga y que están formadas por materiales granulares. En la práctica habitual para conocer la estabilidad de estas estructuras frente a un temporal, tras establecer las acciones de cálculo (empuje frontal y subpresión) se efectúa un cálculo pseudoestático en el que se consideran condiciones drenadas o no drenadas del cimiento en función de su permeabilidad. Se conoce que en los suelos saturados, bajo cargas cíclicas, tiende a producirse una elevación de las presiones intersticiales y una reducción de tensiones efectivas así como una degradación del módulo de deformación tangencial en función del número de ciclos de carga, pudiéndose producir el fenómeno conocido como licuefacción (arenas) o movilidad cíclica (suelos más finos). El objeto de la tesis es explorar la posibilidad, con la tecnología actual, de analizar la estabilidad de los diques de abrigo verticales en cuyo cimiento existen suelos blandos, proponiendo un procedimiento para evaluar la estabilidad dinámica en este tipo de obras. Para ello se han revisado los procedimientos actualmente utilizados para definir las acciones de cálculo, los principales modelos de comportamiento dinámicos de suelos saturados disponibles y los procedimientos de cálculo. Una vez investigado el estado del arte sobre este tema, se propone un procedimiento de cálculo en el que, utilizando el programa comercial FLAC, se establecen las acciones cíclicas sobre un dique de abrigo vertical tipo con distintas condiciones de apoyo, aplicando, para el cimiento, un modelo de comportamiento tipo hiperbólico con generación de presiones intersticiales cuyos parámetros pueden obtenerse de ensayos de campo y laboratorio. Por último, una vez descrito el procedimiento, se aplica a un caso real en el que se produjo un fallo en la cimentación que desembocó en el hundimiento de parte de un dique vertical situado en el puerto de Barcelona, presentándose los resultados obtenidos del análisis efectuado y comparándolos con los obtenidos utilizando los métodos de cálculo habituales. Vertical breakwaters are monolithic structures built to reflect sea waves, thereby providing a sheltered area on the land side. They are gravity retaining structures, that is, their own weight is their basic resisting mechanism. Loads acting on these structures are dynamic (waves) and consist essentially in a frontal thrust and an uplift pressure on the base, which both vary over time. Usually, actions in breakwater design are established by empirical formulas, which are described in this thesis. For works of particular importance, such forces are measured in small-scale laboratory tests. When there are no soils with enough shear strength under the planned vertical breakwaters, they usually rest on granular berms which redistribute the load. Nowadays, after establishing the acting forces on the breakwater (front push and uplift pressure), a pseudostatic calculation (with drained or undrained conditions depending on the foundation permeability) is normally done to analyze the stability of these structures against storm waves. It is known that pore pressures tend to rise in saturated soils under cyclic loading and, consequently, there is a reduction of effective stress. A degradation of the shear modulus also occurs depending on the number of load cycles. All of these effects can bring about the phenomenon known as liquefaction in sands or cyclic mobility in fine-grained soils. The aim of the thesis is to explore the possibility that current technology provides to analyze the stability of vertical breakwaters founded on soft soils, and to suggest a method to evaluate the dynamic stability in this type of works. To this end, a review has been made of procedures currently used to define the actions in calculations, the main models of dynamic behaviour of saturated soils available and of calculation procedures. Once the state of the art on this subject has been reviewed, a method of calculation is proposed that uses the commercial program FLAC and is applied to a typical vertical breakwater on a range of different foundation conditions. For the foundation soil, a hyperbolic constitutive model with pore pressure generation has been employed, whose parameters can be obtained from field and laboratory tests. Finally, the described procedure is applied to an actual case where a foundation failure occurred that led to the sinking of several caissons in a vertical breakwater located in the port of Barcelona. The results obtained with the proposed method are compared with those obtained using conventional methods.

Estudio y diseño de un régimen fiscal que optimice la inversión en exploración y producción de hidrocarburos

Los regímenes fiscales que se aplican a los contratos de exploración y desarrollo de petróleo y gas, entre los propietarios del recurso natural (generalmente el país soberano representado por su gobierno) y las compañías operadoras internacionales (COI) que aportan capital, experiencia y tecnología, no han sabido responder a la reciente escalada de los precios del crudo y han dado lugar a que los países productores no estén recibiendo la parte de renta correspondiente al incremento de precios. Esto ha provocado una ola de renegociaciones llegándose incluso a la imposición unilateral de nuevos términos por parte de algunos gobiernos entre los que destacan el caso de Venezuela y Argentina, por ser los más radicales. El objetivo del presente trabajo es el estudio y diseño de un régimen fiscal que, en las actuales condiciones del mercado, consiga que los gobiernos optimicen sus ingresos incentivando la inversión. Para ello se simulan los efectos de siete tipos diferentes de fiscalidades aplicadas a dos yacimientos de características muy distintas y se valoran los resultados. El modelo utilizado para la simulación es el modelo de escenarios, ampliamente utilizado tanto por la comunidad académica como por la industria para comparar el comportamiento de diferentes regímenes fiscales. Para decidir cuál de las fiscalidades estudiadas es la mejor se emplea un método optimización multicriterio. Los criterios que se han aplicado para valorar los resultados recogen la opinión de expertos de la industria sobre qué factores se consideran deseables en un contrato a la hora invertir. El resultado permite delinear las características de un marco fiscal ideal del tipo acuerdo de producción compartida, sin royalties, con un límite alto de recuperación de crudo coste que permita recobrar todos los costes operativos y una parte de los de capital en cualquier escenario de precios, un reparto de los beneficios en función de un indicador de rentabilidad como es la TIR, con un mecanismo de recuperación de costes adicional (uplift) que incentive la inversión y con disposiciones que premien la exploración y más la de alto riesgo como la amortización acelerada de los gastos de capital o una ampliación de la cláusula de ringfence. Un contrato con estas características permitirá al gobierno optimizar los ingresos obtenidos de sus reservas de petróleo y gas maximizando la producción al atraer inversión para la exploración y mejorar la recuperación alargando la vida del yacimiento. Además al reducir el riesgo percibido por el inversor que recupera sus costes, menor será la rentabilidad exigida al capital invertido y por tanto mayor la parte de esos ingresos que irá a parar al gobierno del país productor. ABSTRACT Fiscal systems used in petroleum arrangements between the owners of the resource (usually a sovereign country represented by its government) and the international operating company (IOC) that provides capital, knowhow and technology, have failed to allocate profits from the recent escalation of oil prices and have resulted in producing countries not receiving the right share of that increase. This has caused a wave of renegotiations and even in some cases, like Venezuela and Argentina, government unilaterally imposed new terms. This paper aims to outline desirable features of a petroleum fiscal system, under current market conditions, for governments to maximize their revenues while encouraging investment. Firstly the impact of seven different types of fiscal regimes is studied with a simulation for two separate oil fields using the scenario approach. The scenario approach has been frequently employed by academic and business researchers to compare the performance of diverse fiscal regimes. In order to decide which of the fiscal regimes’ performance is best we used a multi-objective optimization decision making approach to assess the results. The criteria applied gather the preferences of a panel of industry experts about the desirable features of a contract when making investment decisions. The results show the characteristics of an ideal fiscal framework that closely resembles a production sharing contract, with no royalty payment and a high cost recovery limit that allows the IOC to recover all operating expenses and a share of its capital costs under any price scenario, a profit oil sharing mechanism based on a profitability indicator such as the ROR, with an uplift that allows to recover an additional percentage of capital costs and provisions that promote exploration investment, specially high-risk exploration, such as accelerated depreciation for capital costs and a wide definition of the ringfence clause. A contract with these features will allow governments to optimize overall revenues from its petroleum resources maximizing production by promoting investment on exploration and extending oil fields life. Also by reducing the investor’s perception of risk it will reduce the minimum return to capital required by the IOC and therefore it will increase the government share of those revenues.

Buoyancy-driven, rapid exhumation of ultrahigh-pressure metamorphosed continental crust

Preservation of ultrahigh-pressure (UHP) minerals formed at depths of 90–125 km require unusual conditions. Our subduction model involves underflow of a salient (250 ± 150 km wide, 90–125 km long) of continental crust embedded in cold, largely oceanic crust-capped lithosphere; loss of leading portions of the high-density oceanic lithosphere by slab break-off, as increasing volumes of microcontinental material enter the subduction zone; buoyancy-driven return toward midcrustal levels of a thin (2–15 km thick), low-density slice; finally, uplift, backfolding, normal faulting, and exposure of the UHP terrane. Sustained over ≈20 million years, rapid (≈5 mm/year) exhumation of the thin-aspect ratio UHP sialic sheet caught between cooler hanging-wall plate and refrigerating, downgoing lithosphere allows withdrawal of heat along both its upper and lower surfaces. The intracratonal position of most UHP complexes reflects consumption of an intervening ocean basin and introduction of a sialic promontory into the subduction zone. UHP metamorphic terranes consist chiefly of transformed, yet relatively low-density continental crust compared with displaced mantle material—otherwise such complexes could not return to shallow depths. Relatively rare metabasaltic, metagabbroic, and metacherty lithologies retain traces of phases characteristic of UHP conditions because they are massive, virtually impervious to fluids, and nearly anhydrous. In contrast, H2O-rich quartzofeldspathic, gneissose/schistose, more permeable metasedimentary and metagranitic units have backreacted thoroughly, so coesite and other UHP silicates are exceedingly rare. Because of the initial presence of biogenic carbon, and its especially sluggish transformation rate, UHP paragneisses contain the most abundantly preserved crustal diamonds.

Adaptação do ensaio SPT para determinação de parâmetros adicionais para o dimensionamento de fundações

A presente pesquisa foi desenvolvida com o intuito de agregar alguns procedimentos ao Ensaio SPT, para se obter um maior número de parâmetros para o dimensionamento de fundações, visto que este ensaio é o tipo de investigação de subsolo mais utilizado no Brasil para este fim. Os procedimentos adicionados foram: medida de eficiência do equipamento e ensaio de arrancamento do amostrador em cada camada distinta de solo atravessado. Foram realizados nove ensaios de arrancamento do amostrador, em três furos de sondagem, nas profundidades de dois, cinco e dez metros (três camadas de solos distintas). Em um quarto furo foram realizadas duas provas de carga à compressão no amostrador (nas profundidades de dois e cinco metros) para determinação da eficiência do equipamento. Por meio destes ensaios foi possível obter: a resistência de ponta do ensaio SPT, a resistência por atrito lateral na face externa do amostrador, e a razão de atrito do ensaio SPT, que pode ser usada para a classificação de solo de modo similar ao utilizado para o ensaio de cone. Além destes resultados, neste trabalho foi também analisada a relação entre a resistência por atrito interna e externa no amostrador durante o ensaio, conhecida por a. Esta relação mostrou-se maior para a camada de solo com grande porcentagem de pedregulho e menor para a camada que apresentava maior porcentagem de argila. Foi observado também que o valor de a cresce linearmente com a razão entre o valor de NSPT e a tensão vertical efetiva na profundidade do ensaio. Os resultados deste trabalho também mostraram que o valor da razão entre a resistência de ponta do ensaio SPT (qSPT) e o valor de NSPT é único para o mesmo tipo de solo. Além disso, os valores encontrados nesta pesquisa da razão qSPT/ NSPT são próximos aos valores da razão entre a resistência de ponta do ensaio de cone e o NSPT encontrados na literatura.

Recent landscape evolution at the "Barranco del Río Dulce Natural Park" (Spain). Landscape units and mapping

Landscape units based on the visual features of the relief have been distinguished in the “Barranco del Río Dulce Natural Park” (Spain). These units are geomorphic entities composed of several elementary landforms and characterized by a visual internal homogeneity, and contrast with other landscape units in their location, height, profile and gradients, reflecting their different evolution and genesis. Landscape units bear some subjectivity in their definition and in their boundary location due to the overlapping of geomorphic processes along time. Visual, compositional and conventional boundaries have been used for mapping. Neogene landscape evolution mainly occurred through thrust faulting at the Iberian Ranges-Tagus Basin boundary, driving tectonic uplift and erosion of the Ranges and correlative sedimentation in the Basin. Erosion of the Ranges occurred with the development of planation surfaces, leaving minor isolated reliefs in the upland plains landscape. The lowering of the base level, caused by the endorheic–exorheic transition of the Tagus Basin in the Pliocene, originates fluvial entrenchment and water table lowering with development of the first fluvial valleys and the capture of karstic depressions. Two subsequent phases of renewed fluvial incision (Pleistocene) lead to abandonment of some Pliocene valleys, fluvial captures, and development and reincision of tributaries

Strength of the Iberian intraplate lithosphere: Cenozoic deformations and seismicity

Previous studies about the strength of the lithosphere in the center of Iberia fail to resolve the depth of earthquakes because of the rheological uncertainties. Therefore, new contributions are considered (the crustal structure from a density model) and several parameters (tectonic regime, mantle rheology, strain rate) are checked in this paper to properly examine the role of lithospheric strength in the intraplate seismicity and the Cenozoic evolution. The strength distribution with depth, the integrated strength, the effective elastic thickness and the seismogenic thickness have been calculated by a finite element modelling of the lithosphere across the Central System mountain range and the bordering Duero and Madrid sedimentary basins. Only a dry mantle under strike-slip/extension and a strain rate of 10-15 s-1, or under extension and 10-16 s-1, causes a strong lithosphere. The integrated strength and the elastic thickness are lower in the mountain chain than in the basins. This heterogeneity has been maintained since the Cenozoic and determine the mountain uplift and the biharmonic folding of the Iberian lithosphere during the Alpine deformations. The seismogenic thickness bounds the seismic activity in the upper–middle crust, and the decreasing crustal strength from the Duero Basin towards the Madrid Basin is related to a parallel increase in Plio–Quaternary deformations and seismicity. However, elasto–plastic modelling shows that current African–Eurasian convergence is resolved elastically or ductilely, which accounts for the low seismicity recorded in this region.

Geologia e petrologia da ilha de São Sebastião (Estado de São Paulo)

A ilha de São Sebastião consta principalmente de rochas alcalinas que formam um maciço de 300 km2 aproximadamente, constituindo o terceiro em área no Brasil. Apresenta-se em um "stock" alongado segundo NE-SW, encaixado em estruturas de gnais. As formações geológicas encontradas consistem em 1 - Granitos e Gnais (ARQUEANO), 2 - Eruptivas básicas (RÉTICO), 3 - Eruptivas alcalinas (JURÁSSICO) e 4 - Depósitos recentes (HOLOCENO). O método de estudo empregado foi o petrográfico e a coluna geológica estabelecida em base de dados petrográficos, tectônicos e fisiográficos. O arqueano é determinado por definição dos seus tipos petrográficos (1- gnais facoidal, 2- oligoclásio-gnais, 3- hornblenda-gnais, 4- biotita-gnais e 5- microlina-granito) idênticos aos concorrentes no considerado arqueano do Brasil meridional. O triássico (rético) é conferido às rochas básicas (diabásios e basaltos) pela sua semelhança tectônica e petrográfica com as congêneres que cortam de maneira semelhante o arqueano no continente. A "mise-en-place" das eruptivas alcalinas (1- Nordmarkito, 2- Biotita-pulaskito, 3- Pulaskito, 4- Nefelina-sienito, 5- Foiaito, 6- Essexito-foiaito, 7- Essexito e 8- Teralito) pode ser considerada jurássica devido suas relações com as eruptivas básicas referidas réticas, pois na praia do Bonete (foto 14) observa-se um dique de nordmarkito cortando outro de diabásio. As eruptivas quartzo-dioríticas (quartzo-microdiorito e quartzo-andesito) cortam as alcalinas no cume do Zabumba, indicando sua idade mais moderna que estas. Além deste fato, preenchem linhas de fraturas tectônicas recentes, como as falhas ao longo do canal de São Sebastião, indicando que a topografia deveria ser a mesma que a atual para permitir rios efusivos ao nível do canal ou que pelo menos toda a zona de extrusão estivesse, como hoje está, em superfície. Os depósitos aluviais marinhos e continentais são considerados recentes, (holocênicos) pelo favor da topografia onde se dispõe, ocupando o fundo os vales e os bordos do atual modelado costeiro, idade esta conferida em base fisiográfica. A tectônica que afetou a ilha de São Sebastião participa da que atuou em todo o litoral meridional brasileiro. Pode-se distinguir duas fases distintas: na primeira ocorreram as erupções básicas e as alcalinas subsidiárias e na segunda deram-se os falhamentos escalonados em blocos basculados para NW, com as fraturas de tensão preenchidas pelas eruptivas quartzo-dioríticas. Toda a atividade tectônica foi regulada pela direção NE-SW privilegiada da estrutura do arqueano, correspondente a antigos eixos dos dobramentos laurencianos e huronianos. A geomorfologia da ilha consta de uma antiga superfície de erosão rematada até a senilidade, - o peneplano cretáceo, hoje reduzida às cristas culminares do maciço alcalino e às satélites das estruturas gnáissicas, desnivelada pelo falhamento em blocos e ligeiramente adernada para NW devido ao basculamento. Ao lado desta topografia vestigial existe o modelado atual da ilha caracterizado por uma juventude do estágio evolutivo. Esta escultura foi inaugurada com os últimos levantamentos epirogênicos que ascenderam as eruptivas alcalinas plutônicas a mais de 1.300 m sobre o nível do mar. O modelado costeiro apresenta uma costa típica de submergência com esculturas em rias, no estágio da juventude. A presença de terraceamentos marinhos de abrasão, atualmente elevados cerca de 20 a 30 m, lembra as oscilações epirogênicas ou eustáticas do litoral.

A quasi-elastic aquifer deformational behavior: Madrid aquifer case study

The purpose of this paper is to analyze the quasi-elastic deformational behavior that has been induced by groundwater withdrawal of the Tertiary detrital aquifer of Madrid (Spain). The spatial and temporal evolution of ground surface displacement was estimated by processing two datasets of radar satellite images (SAR) using Persistent Scatterer Interferometry (PSI). The first SAR dataset was acquired between April 1992 and November 2000 by ERS-1 and ERS-2 satellites, and the second one by the ENVISAT satellite between August 2002 and September 2010. The spatial distribution of PSI measurements reveals that the magnitude of the displacement increases gradually towards the center of the well field area, where approximately 80 mm of maximum cumulated displacement is registered. The correlation analysis made between displacement and piezometric time series provides a correlation coefficient greater than 85% for all the wells. The elastic and inelastic components of measured displacements were separated, observing that the elastic component is, on average, more than 4 times the inelastic component for the studied period. Moreover, the hysteresis loops on the stress–strain plots indicate that the response is in the elastic range. These results demonstrate the quasi-elastic behavior of the aquifer. During the aquifer recovery phase ground surface uplift almost recovers from the subsidence experienced during the preceding extraction phase. Taking into account this unique aquifer system, a one dimensional elastic model was calibrated in the period 1997–2000. Subsequently, the model was used to predict the ground surface movements during the period 1992–2010. Modeled displacements were validated with PSI displacement measurements, exhibiting an error of 13% on average, related with the inelastic component of deformation occurring as a long-term trend in low permeability fine-grained units. This result further demonstrates the quasi-elastic deformational behavior of this unique aquifer system.

Regional subsidence modelling in Murcia city (SE Spain) using 1-D vertical finite element analysis and 2-D interpolation of ground surface displacements

Subsidence is a hazard that may have natural or anthropogenic origin causing important economic losses. The area of Murcia city (SE Spain) has been affected by subsidence due to groundwater overexploitation since the year 1992. The main observed historical piezometric level declines occurred in the periods 1982–1984, 1992–1995 and 2004–2008 and showed a close correlation with the temporal evolution of ground displacements. Since 2008, the pressure recovery in the aquifer has led to an uplift of the ground surface that has been detected by the extensometers. In the present work an elastic hydro-mechanical finite element code has been used to compute the subsidence time series for 24 geotechnical boreholes, prescribing the measured groundwater table evolution. The achieved results have been compared with the displacements estimated through an advanced DInSAR technique and measured by the extensometers. These spatio-temporal comparisons have showed that, in spite of the limited geomechanical data available, the model has turned out to satisfactorily reproduce the subsidence phenomenon affecting Murcia City. The model will allow the prediction of future induced deformations and the consequences of any piezometric level variation in the study area.

Tectonic geomorphology assessment of the Ken River catchment near Panna, Madhya Pradesh, India

This thesis focuses on tectonic geomorphology and the response of the Ken River catchment to postulated tectonic forcing along a NE-striking monocline fold in the Panna region, Madhya Pradesh, India. Peninsular India is underlain by three northeast-trending paleotopographic ridges of Precambrian Indian basement, bounded by crustal-scale faults. Of particular interest is the Pokhara lineament, a crustal scale fault that defines the eastern edge of the Faizabad ridge, a paleotopographic high cored by the Archean Bundelkhand craton. The Pokhara lineament coincides with the monocline structure developed in the Proterozoic Vindhyan Supergroup rocks along the Bundelkhand cratonic margin. A peculiar, deeply incised meander-like feature, preserved along the Ken River where it flows through the monocline, may be intimately related to the tectonic regime of this system. This thesis examines 41 longitudinal stream profiles across the length of the monocline structure to identify any tectonic signals generated from recent surface uplift above the Pokhara lineament. It also investigates the evolution of the Ken River catchment in response to the generation of the monocline fold. Digital Elevation Models (DEM) from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used to delineate a series of tributary watersheds and extract individual stream profiles which were imported into MATLAB for analysis. Regression limits were chosen to define distinct channel segments, and knickpoints were defined at breaks between channel segments where there was a discrete change in the steepness of the channel profile. The longitudinal channel profiles exhibit the characteristics of a fluvial system in transient state. There is a significant downstream increase in normalized steepness index in the channel profiles, as well as a general increase in concavity downstream, with some channels exhibiting convex, over-steepened segments. Normalized steepness indices and uppermost knickpoint elevations are on average much higher in streams along the southwest segment of the monocline compared to streams along the northeast segment. Most channel profiles have two to three knickpoints, predominantly exhibiting slope-break morphology. These data have important implications for recent surface uplift above the Pokhara lineament. Furthermore, geomorphic features preserved along the Ken River suggest that it is an antecedent river. The incised meander-like feature appears to be the abandoned river valley of a former Ken River course that was captured during the evolution of the landscape by what is the present day Ken River.

Geochemistry and age model of sediment core BDP96-1

Within the framework of the Baikal Drilling Project (BDP), a 192 m long sediment core (BDP-96-1) was recovered from the Academician Ridge, a submerged topographic high between the North and Central Basins of Lake Baikal. Sedimentological, clay mineralogical and geochemical investigations were carried out on the core interval between 90 and 124 m depth, corresponding to ca. 2.4-3.4 Ma. The aim was to reconstruct the climatic and tectonic history of the continental region during the intensification of Northern Hemisphere glaciation in Late Pliocene time. A major climate change occurred in the Lake Baikal area at about 2.65 Ma. Enhanced physical weathering in the catchment, mirrored in the illite to smectite ratio, and temporarily reduced bioproduction in the lake, reflected by the diatom abundance, evidence a change towards a colder and more arid climate, probably associated with an intensification of the Siberian High. In addition, the coincident onset of distinct fluctuations in these parameters and in the Zr/Al ratio suggests the beginning of the Late Cenozoic high amplitude climate cycles at about 2.65 Ma. Fluctuations in the Zr/Al ratio are traced back to changes in the aeolian input, with high values in warmer, more humid phases due to a weaker Siberian High. Assuming that the sand content in the sediment reflects tectonic pulses, the Lake Baikal area was tectonically active during the entire investigated period, but in particular around 2.65 Ma. Tectonic movements have likely led to a gradual catchment change since about 3.15 Ma from the western towards the eastern lake surroundings, as indicated in the geochemistry and clay mineralogy of the sediments. The strong coincidence between tectonic and climatic changes in the Baikal area hints at the Himalayan uplift being one of the triggers for the Northern Hemisphere Glaciation.

(Table 1) Stable-isotopes of mineral separates and whole-rock powders from altered volcanic rocks of DSDP Hole 62-465A

Hess Rise, in the western Pacific Ocean, formed in the mid-Cretaceous south of the equator and moved north with the Pacific Plate (Lancelot and Larson, 1975; Lancelot, 1978; Valuer et al., 1979). Southern Hess Rise was a volcanic archipelago, at least until late Albian time, after which it subsided to become one of the major aseismic rises in the present western Pacific. A second pulse of volcanic activity apparently occurred in the Campanian-Maastrichtian interval, which may be related to tectonic uplift of Hess Rise (Valuer and Jefferson, this volume). Trachytic rocks underlie 412 meters of carbonate sediments at Site 465 on southern Hess Rise. Twenty-four meters of trachyte were recovered from a 64-meter cored interval. The rocks are relatively homogeneous in texture, color, and composition, indicating that the cored sequence was probably part of only one magmatic event (Seifert et al., this volume). Large (> 5-mm) vesicles and oxidized parts of some flows suggest subaerial or shallow-water extrusions. The rocks are high in silica and relatively rich in Na2O, K2O, and light rare-earth elements. The upper part of the volcanic-rock sequence is a breccia, the fragments cemented by calcite, pyrite, and rare barite. Some of the resultant veins are more than 1 cm thick. In addition to the veins, many vesicles are also filled with these minerals. Brecciation and the number and thickness of veins decrease with depth in the hole. The degree of weathering, as indicated by water content, also decreases with depth.

Ripple migration directions and grain fabric measurements on ODP Hole 210-1276A sediments

Albian turbidites and intercalated shales were cored from ~1145 to 1700 meters below seafloor at Site 1276 in the Newfoundland Basin. Strata at this level dip ~2.5° seaward (toward an azimuth of ~130°) based on seismic profiles. In contrast, beds dip an average of ~10° in the cores. This higher apparent dip is the sum of the ~2.5° seaward dip and a measured hole deviation of 7.43°, which must be essentially in the same seaward direction. Using the maximum dip direction in the cores as a reference direction, paleocurrents were measured from 11 current-ripple foresets and 11 vector means of grain fabric in planar-laminated sandstones. Five of the planar-laminated sandstone samples have a grain imbrication 8°, permitting specification of a unique flow direction rather than just the line-of-motion of the current. Both ripples and grain fabric point to unconfined flow toward the north-northeast. There is considerable spread in the data so that some paleoflow indicators point toward the northwest, whereas others point southeast. Nevertheless, the overall pattern of paleoflow suggests a source for the turbidity currents on the southeastern Grand Banks, likely from the long-emergent Avalon Uplift in that area. On average, turbidity currents apparently flowed axially in the young Albian rift, toward the north. This is opposite to what might be expected for a northward-propagating rift and a young ocean opening in a zipperlike fashion from south to north.