Weld joint characteristics by nano-materials addition

The need for industries to remain competitive in the welding business, has created necessity to develop innovative processes that can exceed customer’s demand. Significant development in improving weld efficiency, during the past decades, still have their drawbacks, specifically in the weld strength properties. The recent innovative technologies have created smallest possible solid material known as nanomaterial and their introduction in welding production has improved the weld strength properties and to overcome unstable microstructures in the weld. This study utilizes a qualitative research method, to elaborate the methods of introducing nanomaterial to the weldments and the characteristic of the welds produced by different welding processes. The study mainly focuses on changes in the microstructural formation and strength properties on the welded joint and also discusses those factors influencing such improvements, due to the addition of nanomaterials. The effect of nanomaterial addition in welding process modifies the physics of joining region, thereby, resulting in significant improvement in the strength properties, with stable microstructure in the weld. The addition of nanomaterials in the welding processes are, through coating on base metal, addition in filler metal and utilizing nanostructured base metal. However, due to its insignificant size, the addition of nanomaterials directly to the weld, would poses complications. The factors having major influence on the joint integrity are dispersion of nanomaterials, characteristics of the nanomaterials, quantity of nanomaterials and selection of nanomaterials. The addition of nanomaterials does not affect the fundamental properties and characteristics of base metals and the filler metal. However, in some cases, the addition of nanomaterials lead to the deterioration of the joint properties by unstable microstructural formations. Still research are ongoing to achieve high joint integrity, in various materials through different welding processes and also on other factors that influence the joint strength.

Cost Reduction of Permanent Magnet Synchronous Machines

Electrical machine drives are the most electrical energy-consuming systems worldwide. The largest proportion of drives is found in industrial applications. There are, however many other applications that are also based on the use of electrical machines, because they have a relatively high efficiency, a low noise level, and do not produce local pollution. Electrical machines can be classified into several categories. One of the most commonly used electrical machine types (especially in the industry) is induction motors, also known as asynchronous machines. They have a mature production process and a robust rotor construction. However, in the world pursuing higher energy efficiency with reasonable investments not every application receives the advantage of using this type of motor drives. The main drawback of induction motors is the fact that they need slipcaused and thus loss-generating current in the rotor, and additional stator current for magnetic field production along with the torque-producing current. This can reduce the electric motor drive efficiency, especially in low-speed, low-power applications. Often, when high torque density is required together with low losses, it is desirable to apply permanent magnet technology, because in this case there is no need to use current to produce the basic excitation of the machine. This promotes the effectiveness of copper use in the stator, and further, there is no rotor current in these machines. Again, if permanent magnets with a high remanent flux density are used, the air gap flux density can be higher than in conventional induction motors. These advantages have raised the popularity of PMSMs in some challenging applications, such as hybrid electric vehicles (HEV), wind turbines, and home appliances. Usually, a correctly designed PMSM has a higher efficiency and consequently lower losses than its induction machine counterparts. Therefore, the use of these electrical machines reduces the energy consumption of the whole system to some extent, which can provide good motivation to apply permanent magnet technology to electrical machines. However, the cost of high performance rare earth permanent magnets in these machines may not be affordable in many industrial applications, because the tight competition between the manufacturers dictates the rules of low-cost and highly robust solutions, where asynchronous machines seem to be more feasible at the moment. Two main electromagnetic components of an electrical machine are the stator and the rotor. In the case of a conventional radial flux PMSM, the stator contains magnetic circuit lamination and stator winding, and the rotor consists of rotor steel (laminated or solid) and permanent magnets. The lamination itself does not significantly influence the total cost of the machine, even though it can considerably increase the construction complexity, as it requires a special assembly arrangement. However, thin metal sheet processing methods are very effective and economically feasible. Therefore, the cost of the machine is mainly affected by the stator winding and the permanent magnets. The work proposed in this doctoral dissertation comprises a description and analysis of two approaches of PMSM cost reduction: one on the rotor side and the other on the stator side. The first approach on the rotor side includes the use of low-cost and abundant ferrite magnets together with a tooth-coil winding topology and an outer rotor construction. The second approach on the stator side exploits the use of a modular stator structure instead of a monolithic one. PMSMs with the proposed structures were thoroughly analysed by finite element method based tools (FEM). It was found out that by implementing the described principles, some favourable characteristics of the machine (mainly concerning the machine size) will inevitable be compromised. However, the main target of the proposed approaches is not to compete with conventional rare earth PMSMs, but to reduce the price at which they can be implemented in industrial applications, keeping their dimensions at the same level or lower than those of a typical electrical machine used in the industry at the moment. The measurement results of the prototypes show that the main performance characteristics of these machines are at an acceptable level. It is shown that with certain specific actions it is possible to achieve a desirable efficiency level of the machine with the proposed cost reduction methods.

Cloning, sequence analysis, and expression of cDNA coding for the major house dust mite allergen, Der f 1, in Escherichia coli

Our objective was to clone, express and characterize adult Dermatophagoides farinae group 1 (Der f 1) allergens to further produce recombinant allergens for future clinical applications in order to eliminate side reactions from crude extracts of mites. Based on GenBank data, we designed primers and amplified the cDNA fragment coding for Der f 1 by nested-PCR. After purification and recovery, the cDNA fragment was cloned into the pMD19-T vector. The fragment was then sequenced, subcloned into the plasmid pET28a(+), expressed in Escherichia coli BL21 and identified by Western blotting. The cDNA coding for Der f 1 was cloned, sequenced and expressed successfully. Sequence analysis showed the presence of an open reading frame containing 966 bp that encodes a protein of 321 amino acids. Interestingly, homology analysis showed that the Der p 1 shared more than 87% identity in amino acid sequence with Eur m 1 but only 80% with Der f 1. Furthermore, phylogenetic analyses suggested that D. pteronyssinus was evolutionarily closer to Euroglyphus maynei than to D. farinae, even though D. pteronyssinus and D. farinae belong to the same Dermatophagoides genus. A total of three cysteine peptidase active sites were found in the predicted amino acid sequence, including 127-138 (QGGCGSCWAFSG), 267-277 (NYHAVNIVGYG) and 284-303 (YWIVRNSWDTTWGDSGYGYF). Moreover, secondary structure analysis revealed that Der f 1 contained an a helix (33.96%), an extended strand (17.13%), a ß turn (5.61%), and a random coil (43.30%). A simple three-dimensional model of this protein was constructed using a Swiss-model server. The cDNA coding for Der f 1 was cloned, sequenced and expressed successfully. Alignment and phylogenetic analysis suggests that D. pteronyssinus is evolutionarily more similar to E. maynei than to D. farinae.

GABA-induced inactivation of Cebus apella V2 neurons: effects on orientation tuning and direction selectivity

We investigated the GABA-induced inactivation of V2 neurons and terminals on the receptive field properties of this area in an anesthetized and paralyzedCebus apella monkey. Extracellular single-unit activity was recorded using tungsten microelectrodes in a monkey before and after pressure-injection of a 0.25 or 0.5 M GABA solution. The visual stimulus consisted of a bar moving in 8 possible directions. In total, 24 V2 neurons were studied before and after blocker injections in 4 experimental sessions following GABA injection into area V2. A group of 10 neurons were studied over a short period. An additional 6 neurons were investigated over a long period after the GABA injection. A third group of 8 neurons were studied over a very long period. Overall, these 24 neurons displayed an early (1-20 min) significant general decrease in excitability with concomitant changes in orientation or direction selectivity. GABA inactivation in area V2 produced robust inhibition in 80% and a significant change in directional selectivity in 60% of the neurons examined. These GABA projections are capable of modulating not only levels of spontaneous and driven activity of V2 neurons but also receptive field properties such as direction selectivity.

Performance assessment of the single photon emission microscope: high spatial resolution SPECT imaging of small animal organs

The single photon emission microscope (SPEM) is an instrument developed to obtain high spatial resolution single photon emission computed tomography (SPECT) images of small structures inside the mouse brain. SPEM consists of two independent imaging devices, which combine a multipinhole collimator, a high-resolution, thallium-doped cesium iodide [CsI(Tl)] columnar scintillator, a demagnifying/intensifier tube, and an electron-multiplying charge-coupling device (CCD). Collimators have 300- and 450-µm diameter pinholes on tungsten slabs, in hexagonal arrays of 19 and 7 holes. Projection data are acquired in a photon-counting strategy, where CCD frames are stored at 50 frames per second, with a radius of rotation of 35 mm and magnification factor of one. The image reconstruction software tool is based on the maximum likelihood algorithm. Our aim was to evaluate the spatial resolution and sensitivity attainable with the seven-pinhole imaging device, together with the linearity for quantification on the tomographic images, and to test the instrument in obtaining tomographic images of different mouse organs. A spatial resolution better than 500 µm and a sensitivity of 21.6 counts·s-1·MBq-1 were reached, as well as a correlation coefficient between activity and intensity better than 0.99, when imaging 99mTc sources. Images of the thyroid, heart, lungs, and bones of mice were registered using 99mTc-labeled radiopharmaceuticals in times appropriate for routine preclinical experimentation of <1 h per projection data set. Detailed experimental protocols and images of the aforementioned organs are shown. We plan to extend the instrument's field of view to fix larger animals and to combine data from both detectors to reduce the acquisition time or applied activity.

Lead and cadmium content of Brazilian beers

The elements called heavy metals when ingested are not completely eliminated from animal bodies and are responsible for chronic and acute intoxications. Sixty-three samples of beer, produced in the states of São Paulo, Paraná, Rio de Janeiro, Rio Grande do Sul, Minas Gerais, and Pará, were analysed for lead and cadmium content by atomic absorption spectrometry with graphite furnace atomization and Zeeman correction. The concentrations of Pb and Cd of dark differed significantly from light beers, being higher in the former. No significant difference was found between the beers produced in predominantly rural areas and the ones produced in industrialized areas. The concentrations of lead and cadmium in all samples were bellow the maximum accepted by present Brazilian regulations and ranged from not detected to 290mugPb/L and from not detected to 14.3mugCd/L. The average concentrations were 37mugPb/L and 1.6mugCd/L.

Permanent magnet synchronous generator design solution for large directdrive wind turbines: Thermal behavior of the LC DD-PMSG

Wind is one of the most compelling forms of indirect solar energy. Available now, the conversion of wind power into electricity is and will continue to be an important element of energy self-sufficiency planning. This paper is one in a series intended to report on the development of a new type of generator for wind energy; a compact, high-power, direct-drive permanent magnet synchronous generator (DD-PMSG) that uses direct liquid cooling (LC) of the stator windings to manage Joule heating losses. The main param-eters of the subject LC DD-PMSG are 8 MW, 3.3 kV, and 11 Hz. The stator winding is cooled directly by deionized water, which flows through the continuous hollow conductor of each stator tooth-coil winding. The design of the machine is to a large degree subordinate to the use of these solid-copper tooth-coils. Both steady-state and timedependent temperature distributions for LC DD-PMSG were examined with calculations based on a lumpedparameter thermal model, which makes it possible to account for uneven heat loss distribution in the stator conductors and the conductor cooling system. Transient calculations reveal the copper winding temperature distribution for an example duty cycle during variable-speed wind turbine operation. The cooling performance of the liquid cooled tooth-coil design was predicted via finite element analysis. An instrumented cooling loop featuring a pair of LC tooth-coils embedded in a lamination stack was built and laboratory tested to verify the analytical model. Predicted and measured results were in agreement, confirming the predicted satisfactory operation of the LC DD-PMSG cooling technology approach as a whole.

Optimization of the extraction of carrageenan from Kappaphycus alvarezii using response surface methodology

This study aims to optimize an alternative method of extraction of carrageenan without previous alkaline treatment and ethanol precipitation using Response Surface Methodology (RSM). In order to introduce an innovation in the isolation step, atomization drying was used reducing the time for obtaining dry carrageenan powder. The effects of extraction time and temperature on yield, gel strength, and viscosity were evaluated. Furthermore, the extracted material was submitted to structural analysis, by infrared spectroscopy and nuclear magnetic resonance spectroscopy (¹H-NMR), and chemical composition analysis. Results showed that the generated regression models adequately explained the data variation. Carrageenan yield and gel viscosity were influenced only by the extraction temperature. However, gel strength was influenced by both, extraction time and extraction temperature. Optimal extraction conditions were 74 ºC and 4 hours. In these conditions, the carrageenan extract properties determined by the polynomial model were 31.17%, 158.27 g.cm-2, and 29.5 cP for yield, gel strength, and viscosity, respectively, while under the experimental conditions they were 35.8 ± 4.68%, 112.50 ± 4.96 g.cm-2, and 16.01 ± 1.03 cP, respectively. The chemical composition, nuclear magnetic resonance spectroscopy, and infrared spectroscopy analyses showed that the crude carrageenan extracted is composed mainly of κ-carrageenan.

Study of the physicochemical characteristics of soursop powder obtained by spray-drying

This study aimed at contributing to the development of new foodstuffs made by soursop pulp powder obtained by spraydrying. Different concentrations of maltodextrin DE 20 (15, 30, and 45%) were added to commercial soursop pulp, which was dehydrated afterwards. The following analyses were carried out: water activity, moisture, pH, soluble solids, acidity, ascorbic acid, hygroscopicity, degree of caking, and rehydration time. The results obtained for the three powder treatments (15, 30 and 45% of maltodextrin) were, respectectively: water activity (0.19a±0.00; 0.20a±0.00; 0.18a±0.01); moisture (1.17c±0.12; 1.47b±0.05; 1.82a±0.06); pH (3.75a±0.05; 3.73a±0.06; 3.70a±0.03); soluble solids (89.67a±0.00; 89.84a±0.00; 90.00a±0.06); acidity (3.01a±0.02; 1.91b±0.03; 1.24c±0.03); ascorbic acid (18.90a±0.00; 14.48b±0.00; 11.26b±0.78); hygroscopicity (5.93a±0.40; 3.82b±0.16; 3.28b±0.38); degree of caking (78.36a±2.86; 35.38b±6.07; 24.77b4.89), and rehydration time (02.03a±0.46; 01.16ab±0.50; 0.59b±0.30). The soursop powders with 30 and 45% of maltodextrin had few significant differences in terms of physicochemical and hygroscopic characteristics, which allow us to consider the percentage of 30% of maltodextrin, in this study, as the best percentage for soursop pulp atomization.

Design and Material Selection of High-Speed Rotating Electrical Machines

The increasing emphasis on energy efficiency is starting to yield results in the reduction in greenhouse gas emissions; however, the effort is still far from sufficient. Therefore, new technical solutions that will enhance the efficiency of power generation systems are required to maintain the sustainable growth rate, without spoiling the environment. A reduction in greenhouse gas emissions is only possible with new low-carbon technologies, which enable high efficiencies. The role of the rotating electrical machine development is significant in the reduction of global emissions. A high proportion of the produced and consumed electrical energy is related to electrical machines. One of the technical solutions that enables high system efficiency on both the energy production and consumption sides is high-speed electrical machines. This type of electrical machines has a high system overall efficiency, a small footprint, and a high power density compared with conventional machines. Therefore, high-speed electrical machines are favoured by the manufacturers producing, for example, microturbines, compressors, gas compression applications, and air blowers. High-speed machine technology is challenging from the design point of view, and a lot of research is in progress both in academia and industry regarding the solution development. The solid technical basis is of importance in order to make an impact in the industry considering the climate change. This work describes the multidisciplinary design principles and material development in high-speed electrical machines. First, high-speed permanent magnet synchronous machines with six slots, two poles, and tooth-coil windings are discussed in this doctoral dissertation. These machines have unique features, which help in solving rotordynamic problems and reducing the manufacturing costs. Second, the materials for the high-speed machines are discussed in this work. The materials are among the key limiting factors in electrical machines, and to overcome this limit, an in-depth analysis of the material properties and behavior is required. Moreover, high-speed machines are sometimes operating in a harsh environment because they need to be as close as possible to the rotating tool and fully exploit their advantages. This sets extra requirements for the materials applied.

Nietzsche's eternal recurrence of the same : the effect of logic abridgement, contradictions and inconsistencies

I will argue that the doctrine of eternal recurrence of the same no better interprets cosmology than pink elephants interpret zoology. I will also argue that the eternal-reiurn-of-the-same doctrine as what Magnus calls "existential imperative" is without possibility of application and thus futile. To facilitate those arguments, the validity of the doctrine of the eternal recurrence of the same will be tested under distinct rubrics. Although each rubric will stand alone, one per chapter, as an evaluation of some specific aspect of eternal recurrence, the rubric sequence has been selected to accommodate the identification of what I shall be calling logic abridgments. The conclusions to be extracted from each rubric are grouped under the heading CONCLUSION and appear immediately following rubric ten. Then, or if, at the end of a rubric a reader is inclined to wonder which rubric or topic is next, and why, the answer can be found at the top of the following page. The question is usually answered in the very first sentence, but always answered in the first paragraph. The first rubric has been placed in order by chronological entitlement in that it deals with the evolution of the idea of eternal recurrence from the time of the ancient Greeks to Nietzsche's August, 1881 inspiration. This much-recommended technique is also known as starting at the beginning. Rubric 1 also deals with 20th. Century philosophers' assessments of the relationship between Nietzsche and ancient Greek thought. The only experience of E-R, Zarathustra's mountain vision, is second only because it sets the scene alluded to in following rubrics. The third rubric explores .ii?.ih T jc,i -I'w Nietzsche's evaluation of rationality so that his thought processes will be understood appropriately. The actual mechanism of E-R is tested in rubric four...The scientific proof Nietzsche assembled in support of E-R is assessed by contemporary philosophers in rubric five. E-R's function as an ethical imperative is debated in rubrics six and seven.. .The extent to which E-R fulfills its purpose in overcoming nihilism is measured against the comfort assured by major world religions in rubric eight. Whether E-R also serves as a redemption for revenge is questioned in rubric nine. Rubric ten assures that E-R refers to return of the identically same and not merely the similar. In addition to assemblage and evaluation of all ten rubrics, at the end of each rubric a brief recapitulation of its principal points concludes the chapter. In this essay I will assess the theoretical conditions under which the doctrine cannot be applicable and will show what contradictions and inconsistencies follow if the doctrine is taken to be operable. Harold Alderman in his book Nietzsche's Gift wrote, the "doctrine of eternal recurrence gives us a problem not in Platonic cosmology, but in Socratic selfreflection." ^ I will illustrate that the recurrence doctrine's cosmogony is unworkable and that if it were workable, it would negate self-reflection on the grounds that selfreflection cannot find its cause in eternal recurrence of the same. Thus, when the cosmology is shown to be impossible, any expected ensuing results or benefits will be rendered also impossible. The so-called "heaviest burden" will be exposed as complex, engrossing "what if speculations deserving no linkings to reality. To identify ^Alderman p. 84 abridgments of logic, contradictions and inconsistencies in Nietzsche's doctrine of eternal recurrence of the same, I. will examine the subject under the following schedule. In Chapter 1 the ancient origins of recurrence theories will be introduced. ..This chapter is intended to establish the boundaries within which the subsequent chapters, except Chapter 10, will be confined. Chapter 2, Zarathustra's vision of E-R, assesses the sections of Thus Spoke Zarathustra in which the phenomenon of recurrence of the same is reported. ..Nihilism as a psychological difficulty is introduced in this rubric, but that subject will be studied in detail in Chapter 8. In Chapter 2 the symbols of eternal recurrence of the same will be considered. Whether the recurrence image should be of a closed ring or as a coil will be of significance in many sections of my essay. I will argue that neither symbolic configuration can accommodate Nietzsche's supposed intention. Chapter 3 defends the description of E-R given by Zarathustra. Chapter 4, the cosmological mechanics of E-R, speculates on the seriousness with which Nietzsche might have intended the doctrine of eternal recurrence to be taken. My essay reports, and then assesses, the argument of those who suppose the doctrine to have been merely exploratory musings by Nietzsche on cosmological hypotheses...The cosmogony of E-R is examined. In Chapter 5, cosmological proofs tested, the proofs for Nietzsche's doctrine of return of the same are evaluated. This chapter features the position taken by Martin ' Heidegger. My essay suggests that while Heidegger's argument that recurrence of the same is a genuine cosmic agenda is admirable, it is not at all persuasive. Chapter 6, E-R is an ethical imperative, is in essence the reporting of a debate between two scholars regarding the possibility of an imperative in the doctrine of recurrence. Their debate polarizes the arguments I intend to develop. Chapter 7, does E-R of the same preclude alteration of attitudes, is a continuation of the debate presented in Chapter 6 with the focus shifted to the psychological from the cosmological aspects of eternal recurrence of the same. Chapter 8, Can E-R Overcome Nihilism?, is divided into two parts. In the first, nihilism as it applies to Nietzsche's theory is discussed. ..In part 2, the broader consequences, sources and definitions of nihilism are outlined. My essay argues that Nietzsche's doctrine is more nihilistic than are the world's major religions. Chapter 9, Is E-R a redemption for revenge?, examines the suggestion extracted from Thus Spoke Zarathustra that the doctrine of eternal recurrence is intended, among other purposes, as a redemption for mankind from the destructiveness of revenge. Chapter 10, E-R of the similar refuted, analyses a position that an element of chance can influence the doctrine of recurrence. This view appears to allow, not for recurrence of the same, but recurrence of the similar. A summary will recount briefly the various significant logic abridgments, contradictions, and inconsistencies associated with Nietzsche's doctrine of eternal recurrence of the same. In the 'conclusion' section of my essay my own opinions and observations will be assembled from the body of the essay.

Some electrical properties of semi-conductor crystals / |nPhyu Phyu Khin. -- 260 St. Catharines, Ont. : [s. n.],

SiC and AtB 12 have been prepared and their resistivities and Hall voltages measured. The resistivities and Hall voltages were measured by the Van der Pauw's method, using spring loaded tungsten contacts. In this method, the major requirement is to have samples of plane parallel surfaces of arbitrary shape with four small contacts at the circumference. Similar measurements were made with a number of SiC crystals obtained from the Norton Research Corporation (Canada)-Ltd., Carolina Aluminum Co., Exolon Co. and Carborundum Co. It was found that resistivity, carrier concentration and mobility of ions depend on the type of impurity. AtB 12 was prepared from the melt containing At and B in the ratio of 4:1. They formed amber-colour pseudo tetragonal crystals. As the crystals obtained were small for electrical measurements, hot pressed lumps have been used to measure their resistivity.

Polyglutamine monomer structure and its implications for molecular self-assembly

Polyglutamine is a naturally occurring peptide found within several proteins in neuronal cells of the brain, and its aggregation has been implicated in several neurodegenerative diseases, including Huntington's disease. The resulting aggregates have been demonstrated to possess ~-sheet structure, and aggregation has been shown to start with a single misfolded peptide. The current project sought to computationally examine the structural tendencies of three mutant poly glutamine peptides that were studied experimentally, and found to aggregate with varying efficiencies. Low-energy structures were generated for each peptide by simulated annealing, and were analyzed quantitatively by various geometry- and energy-based methods. According to the results, the experimentally-observed inhibition of aggregation appears to be due to localized conformational restraint placed on the peptide backbone by inserted prolines, which in tum confines the peptide to native coil structure, discouraging transition towards the ~sheet structure required for aggregation. Such knowledge could prove quite useful to the design of future treatments for Huntington's and other related diseases.

Letter - Nikola Tesla to William B. Rankine, 19 April 1904

A letter from Nikola Tesla to William B. Rankine in the year 1904. Tesla discusses the worth of his patents/companies. Tesla also remarks on the power of several of his machines including "Tesla Coil", "Tesla Transformer", and "Tesla High-Potential Methods".

Encapsulation de Dehalococcoides: avantage pour la déhalogénation des solvants chlorés en sites contaminés

Le tétrachloroéthène (PCE) et les éthènes chlorés qui lui sont apparentés ont été abondamment utilisés pour plusieurs applications en industrie dès le début du 20e siècle. Ils sont cependant comptés parmi les polluants les plus communs des sols et de l’eau et beaucoup d’efforts sont déployés afin de les éliminer. Nous croyons que la conversion des éthènes chlorés en éthènes par des microorganismes est une solution prometteuse. Le premier aspect du projet visait donc à établir les conditions pour lesquelles un consortium enrichi en Dehalococcoides ethenogenes permettrait la conversion complète de PCE en éthène. Les expériences réalisées nous ont permis de souligner le rôle de l’acide lactique ajouté aux cultures comme source de carbone et source indirecte d’électrons pour la déhalorespiration. Nous avons également pu établir l’effet de la concentration initiale de biomasse dans les cultures sur le profil de déhalogénation du PCE. Le deuxième aspect du projet visait à développer un protocole d’encapsulation du consortium dans une matrice polymérique afin de profiter des nombreux avantages potentiels de l’encapsulation. Nous avons testé trois montages d’encapsulation différents : atomisation avec jet d’air, atomisation avec vibrations ultrasoniques et « drop-wise ». Le dernier montage prévoyait l’encapsulation des cultures dans des billes d’alginate enrobées de chitosane gélifié par du lignosulfonate. C’est le seul montage qui nous a permis d’encapsuler le consortium de façon efficace sans effet significatifs négatifs sur son activité de déchlorination. Aussi, la comparaison des profils de déhalogénation du PCE de cellules encapsulées et cellules libres a montré une plus faible accumulation de TCE, 1,2-DCE et VC dans les échantillons de cellules encapsulée et, par conséquent, une conversion plus rapide et plus complète du PCE en éthène. Finalement, nous avons observé une tendance favorable à l’idée que les microorganismes encapsulés bénéficient d’un effet de protection contre de faibles concentrations d’oxygène.