Cellulose microfibril angle in the cell wall of wood fibres

The term microfibril angle (MFA) in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall of fibres and tracheids and the long axis of cell. Technologically, it is usually applied to the orientation of cellulose microfibrils in the S2 layer that makes up the greatest proportion of the wall thickness, since it is this which most affects the physical properties of wood. This review describes the organisation of the cellulose component of the secondary wall of fibres and tracheids and the various methods that have been used for the measurement of MFA. It considers the variation of MFA within the tree and the biological reason for the large differences found between juvenile (or core) wood and mature (or outer) wood. The ability of the tree to vary MFA in response to environmental stress, particularly in reaction wood, is also described. Differences in MFA have a profound effect on the properties of wood, in particular its stiffness. The large MFA in juvenile wood confers low stiffness and gives the sapling the flexibility it needs to survive high winds without breaking. It also means, however, that timber containing a high proportion of juvenile wood is unsuitable for use as high-grade structural timber. This fact has taken on increasing importance in view of the trend in forestry towards short rotation cropping of fast grown species. These trees at harvest may contain 50% or more of timber with low stiffness and therefore, low economic value. Although they are presently grown mainly for pulp, pressure for increased timber production means that ways will be sought to improve the quality of their timber by reducing juvenile wood MFA. The mechanism by which the orientation of microfibril deposition is controlled is still a matter of debate. However, the application of molecular techniques is likely to enable modification of this process. The extent to which these techniques should be used to improve timber quality by reducing MFA in juvenile wood is, however, uncertain, since care must be taken to avoid compromising the safety of the tree.

Cellulose microfibril angle in the cell wall of wood fibres

The term microfibril angle (MFA) in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall of fibres and tracheids and the long axis of cell. Technologically, it is usually applied to the orientation of cellulose microfibrils in the S2 layer that makes up the greatest proportion of the wall thickness, since it is this which most affects the physical properties of wood. This review describes the organisation of the cellulose component of the secondary wall of fibres and tracheids and the various methods that have been used for the measurement of MFA. It considers the variation of MFA within the tree and the biological reason for the large differences found between juvenile (or core) wood and mature (or outer) wood. The ability of the tree to vary MFA in response to environmental stress, particularly in reaction wood, is also described. Differences in MFA have a profound effect on the properties of wood, in particular its stiffness. The large MFA in juvenile wood confers low stiffness and gives the sapling the flexibility it needs to survive high winds without breaking. It also means, however, that timber containing a high proportion of juvenile wood is unsuitable for use as high-grade structural timber. This fact has taken on increasing importance in view of the trend in forestry towards short rotation cropping of fast grown species. These trees at harvest may contain 50% or more of timber with low stiffness and therefore, low economic value. Although they are presently grown mainly for pulp, pressure for increased timber production means that ways will be sought to improve the quality of their timber by reducing juvenile wood MFA. The mechanism by which the orientation of microfibril deposition is controlled is still a matter of debate. However, the application of molecular techniques is likely to enable modification of this process. The extent to which these techniques should be used to improve timber quality by reducing MFA in juvenile wood is, however, uncertain, since care must be taken to avoid compromising the safety of the tree.

The later Anglo-Saxon settlement at Bishopstone. A downland manor in the making

This volume reports on the excavations from 2002 to 2005 designed to investigate this transition, with the focus on the origins of Bishopstone village. Excavations adjacent to St Andrew’s churchyard revealed a dense swathe of later Anglo-Saxon (8th- to late 10th-/early 11th-century) habitation, including a planned complex of ‘timber halls’, and a unique cellared tower. The occupation encroached upon a pre-Conquest cemetery of 43 inhumations. The report provides a comprehensive analysis, interpretation and academic contextualisation of the archaeological discoveries brought to light by these excavations, the first to sample a later Anglo-Saxon rural settlement in East Sussex on an extensive scale. The inter-disciplinary approach appraises the historical and topographical evidence alongside that recovered during the excavations.

A spatial–temporal analysis of the impact of access restrictions on forest landscapes and household welfare in Tanzania

This paper explores the impact of the re-introduction of access restrictions to forests in Tanzania, through participatory forest management (PFM), that have excluded villagers from forests to which they have traditionally, albeit illegally, had access to collect non-timber forest products (NTFPs). Motivated by our fieldwork, and using a spatial–temporal model, we focus on the paths of forest degradation and regeneration and villagers' utility before and after an access restriction is introduced. Our paper illustrates a number of key points for policy makers. First, the benefits of forest conservation tend to be greatest in the first few periods after an access restriction is introduced, after which the overall forest quality often declines. Second, villagers may displace their NTFP collection into more distant forests that may have been completely protected by distance alone before access to a closer forest was restricted. Third, permitting villagers to collect limited amounts of NTFPs for a fee, or alternatively fining villagers caught collecting illegally from the protected forest, and returning the fee or fine revenue to the villagers, can improve both forest quality and villagers' livelihoods.

Land use intensity and trees on farms in Malawi

Rapidly increasing population densities in Malawi have put a huge strain on the existing agricultural land and the surrounding woodland. Smallholder agriculture is the dominant economic activity of Malawi’s rural population and many farmers have been forced to cultivate marginal lands with less fertile soils, making conditions much more difficult to grow crops. Natural woodland is under increasing pressure from the opening of new lands for cultivation and the increased demand for firewood, timber and other woody resources, with rural households historically obtaining most of their complementary inputs and saleable commodities from nearby areas of forest (Arnold, 1997a). Despite this increasing pressure, woodlands are not being cleared indiscriminately; selected indigenous species are left standing in fields and around households. These are joined by exotic species that are planted and maintained. These trees provide products and services that are vital, yielding food, firewood, building materials and medicine, replenishing soil fertility and protecting against soil erosion. Following a Boserupian approach, this study attempts to establish the reality of a trajectory of enhanced on-farm tree planting and management as population pressure mounts and as part of a more general process of agricultural intensification. The study examines the combination of factors (social, economic, political and environmental) that either stimulate or discourage on-farm tree planting on smallholdings in Malawi, highlighting how woodland resource use changes over a gradient of land use intensity. This study gives a detailed insight into the way that tree planting and management in the smallholder farming system in Malawi works and identifies a trend of increased tree planting/management alongside an increase in agricultural intensification. However, there is no single ‘path’ of intensification; the link between agricultural change and tree planting is complex and there are many trajectories of intensification that a farmer may follow, dependent on his/her social or economic circumstances. The study recommends that agroforestry interventions give rigorous consideration to the needs of the local community, and the suitability of trees to address those needs, before embarking on programmes that advocate tree planting and management as a panacea.

Characterising the use of urban space: a geochemical case study from Calleva Atrebatum (Silchester, Hampshire, UK) Insula IX during the late first/early second century AD

The geochemical analysis of soil samples from the Roman town of Calleva Atrebatum (Silchester, Hampshire, UK) has been undertaken in order to enhance our understanding of urban occupation during the late first/early second century AD. Samples taken from a variety of occupation deposits within several, contemporary timber buildings, including associated hearths, have been analysed using laboratory-based x-ray fluorescence for a suite of elements (Cu, Zn, Pb, Sr, P and Ca). The patterns of elemental enrichment seen across the site have allowed us to compare and contrast the buildings that were occupied during this time in an attempt to distinguish different uses, such as between domestic and work-space. Two of the buildings stand out as having high concentrations of elements which suggest that they were dirtier work spaces, whilst other buildings appear to be have lower chemical loadings suggesting they were cleaner.

Habitat use by the South-American rattlesnake (Crotalus durissus) in south-eastern Brazil

Habitat use affects food intake, reproductive fitness and body temperature control in reptiles. Habitat use depends on both the characteristics of the animal and the environmental heterogeneity. In this study we investigated habitat use in a population of the South-American rattlesnake, Crotalus durissus, in a cerrado (the Brazilian savanna) remnant, in south-eastern Brazil. In general, snakes appeared to be thermal generalists. However, they showed substrate temperature preferences in the rainy season, when they selected colder substrates during the day and warmer substrates at night. Individuals were predominantly active on the surface and more frequently found under bushes. Furthermore, in general, the principal component analysis results indicate that rattlesnakes are generalists regarding the microhabitat variables examined in this study. These habitat characteristics, associated with a low thermal selectivity, indicate that rattlesnakes are able to colonize deforested areas where shade occurrence and vegetation cover are similar to those in the cerrado.

Simulation of Sawmill Yard Operations Using Software Agents

Bergkvist insjön AB is a sawmill yard which is capable of producing 350,000 cubic meter of timber every year this requires lot of internal resources. Sawmill operations can be classified as unloading, sorting, storage and production of timber. In the company we have trucks arriving at random they have to be unloaded and sent back at the earliest to avoid queuing up of trucks creating a problem for truck owners. The sawmill yard has to operate with two log stackers that does several tasks including transporting the logs from trucks to measurement station where the logs will be sorted into classes and dropped into pockets from pockets to the sorted timber yard where they are stored and finally from there to sawmill for final processing. The main issue that needs to be answered here is the lining up trucks that are waiting to be unload, creating a problem for both sawmill as well as the truck owners and given huge production volume, it is certain that handling of resources is top priority. A key challenge in handling of resources would be unloading of trucks and finding a way to optimize internal resources.To address this problem i have experimented on different ways of using internal resources, i have designed different cases, in case 1 we have both the log stackers working on sawmill and measurement station. The main objective of having this case is to make sawmill and measurement station to work all the time. Then in case 2, i have divided the work between both the log stackers, one log stacker will be working on sawmill and pocket_control and second log stacker will be working on measurement station and truck. Then in case 3 we have only one log stacker working on all the agents, this case was designed to reduce cost of production, as the experiment cannot be done in real-time due to operational cost, for this purpose simulation is used, preliminary investigation into simulation results suggested that case 2 is the best option has it reduced waiting time of trucks considerably when compared with other cases and it showed 50% increase in optimizing internal resources.

Färg och missfärgning hos sågad björk : - Variation samt effekter av avverkningstidpunkt, lagring av timmer och torkning av sågad vara

Variation i björkvirkets färg beror på art, läge i träd, ursprung och lagringstid. Vårtbjörk har en mörkare färg än glasbjörk, men livligare struktur och glans. Timmer hugget under tillväxtsäsongen bör sågas färskt eller lagras högst en månad. Vid brädgårdstorkning är god luftcirkulation och skydd för väta och direkt solljus väsentligt. Strövirkets färskhet är av stor betydelse för att undvika fuktfärgning av virket.Variation in birch colours depend on species, position in tree, origin and the storage period. White birch is darker than hairy birch but with a lively structure and shine. During vegetation period timber storage exceeding one month should be avoided. Air circulation, protection from rain and direct sunlight are essential for yard drying. Freshness of stickers used for stacking is important to avoid water marks on wood surface.

Vedegenskaper i härskande och behärskade granar vid Remingstorp : Wood properties in dominant and sub-dominant trees of Norway spruce at Remingstorp

Variation in wood properties for Picea abies trees and logs of different dimensions has been studied at two sites in southern Sweden of different site quality class. Trees have been classified as dominant or sub-dominant, according to their height. Log and board grades were classified and strength grade of boards, basic density and annual ring width measured. A similar study made on four northern sites was used as reference material.Sub-dominant trees were of superior quality in comparison to dominant trees, when classified by log and board grades or strength grading. Differences were accentuated for the second log where the sub-dominant trees had superior strength and low amount of boards with coarse branches. The results correspond well to those from the northern region, Jämtland. The classifica¬tion of boards as well as bending strength indicated superior properties on timber from northern sites even though the basic density was similar.

Långa toppar - metod för uttag av skogsbränsle i slutavverkningar : Slutrapport (STEM-projekt 21937-1)

SammanfattningHögskolan Dalarna har i samarbete med Skogsägarna Mellanskog, Naturbränsle i Mellan¬sverige AB och GDE-Net genomfört studier på en ny metod för uttag av skogsbränsle från slutavverkningar. Metoden går ut på att timmer tas ut som enda rundvirkessortiment. Resten av trädet, samt klenare träd som inte håller timmerdimension, tas ut som ett bränslesortiment. Metoden har jämförts med en konventionell slutavverkning med uttag av timmer, massaved och GROT-flis.Enligt genomförda försök skulle en avverkning enligt den nya metoden (långa toppar) ge ett högre drivningsnetto och drygt dubbelt så mycket bränsleflis som en konventionell avverk¬ning. En anledning till det högre drivningsnettot är att kostnaden för flisning blir lägre än vid flisning av GROT och att flisen betalas bättre än GROT-flis. Resultaten är beroende av de faktiska beståndsförutsättningarna och gällande prisrelationer mellan massaved och bränsle¬flis.Faktorer som har en positiv inverkan på drivningsnettot vid uttag av ”långa toppar” är t.ex. stora uttagsvolymer och korta terrängtransportavstånd samt bestånd med en hög andel virke av låg kvalitet eller udda sortiment som betalas dåligt på rundvirkesmarknaden.SummaryIn Sweden forest energy from final felling is traditionally harvested as logging residues after harvesting of timber (saw logs) and pulpwood, but depending on the market situation other methods with higher yield of forest energy might be of interest. Dalarna University has study a new method called “Undelimbed long tops” where only saw timber was taken out as an industrial assortment. The rest of the trees and smaller trees that don’t hold timber dimensions was left intact on the clear-felled area and been chipped later on. The study was done in different stands with some different conditions. The results have been compared with the traditional method for final felling. The surplus (forest owners net income) was higher in almost all stands when the method with “undelimbed long tops” was used, compared to the traditional method for taking out forest energy, and the volume of chips was more than doubled. A reason for the higher income from long tops is that the costs for chipping is lower and the prize of chips is higher compared to chips from logging residues. Other reason is that forest owners will not be paid for wasted pulpwood, but will be fully paid for the chips from such pulpwood. Factors that will have a positive influence on the ULT-method are for example large logging volumes and short distance between the logging area and the landing, different kinds of price reductions on pulpwood and large volumes of rotten wood or low paid industrial assortments.

Trätorn : Kan det vara något för svensk vindkraft i skogsmiljö?

Inom ramen för projektet Energi- och miljökompetenscentrum vid Högskolan Dalarna haren kortare förstudie kring tekniken som används av Timber Tower GmbH för högavindkrafttorn i trä gjorts. Huvudsyftet med studien har varit att titta närmare på teknikenoch dess potential för svensk landbaserad vindkraft samt utreda vad detta kan innebära förregionen.Trenden för landbaserad vindkraft i skogsmiljö går mot allt högre torn. Skogsmiljön gör attden marknära turbulensen och vindgradienten blir större än över t.ex. hav vilket gör detmer föredelaktigt att använda högre torn.Tekniken som Timber Tower GmbH använder är att bygga tornet på plats med en koniskhålstomme av plana paneler av korslimmat limträ (som annars främst används vidbyggnation av höga hus med massivträstomme). Tekniken är skyddad av ett flertalpatentansökningar varav minst en är beviljad.Vid en jämförelse mellan trätorn och svetsade ståltorn (som är den dominerandetorntekniken idag) kan det konstateras att trätornstekniken är ekonomiskt intressant.Framförallt blir trätornen mer intressanta i jämförelse med ståltornen vi ökande höjder (>100 m) pga. dess transportfördelar. Vidare bör det nämnas att de torntekniker somanvänds idag vid höjder runt 140 m och högre främst är fackverkstorn i stål ochhybridtorn med en hög bas av förspänd betong och övre delen i stål.Då ett typgodkännande av ett vindkraftverk gäller torn och turbin är det i praktiken alltidturbintillverkaren som prissätter och levererar ett komplett vindkraftverk. Medutgångspunkt i regeringens planeringsram för svensk vindkraftutbyggnad (20 TWh/årlandbaserad vindkraft 2020) kan dock marknadsvärdet för torn uppskattas till 2-3 miljarderkr/år fram till 2020. För trätorn motsvarar detta en årlig potentiell volym på ca 190 000 m3.Slutsatsen i denna korta studie är att det är tekniskt möjligt att designa ett trätorn i rimligadimensioner för en 2-3 MW turbin med navhöjd ca 140 m och att detta sannolikt även ärekonomiskt intressant. Då ett trätorn blir något lättare än motsvarande ståltorn går det åtmindre energi för att göra ett trätorn. Hur mycket mindre är dock osäkert pga. den storaspridningen i siffror för energiåtgång för stålproduktion och i praktiken blir skillnadenäven leverantörsberoende. Eftersom andelen förnyelsebar energi är betydligt större vidtillverkningen av materialet för trätornen kommer trätornet att ge en betydande sänkningpå utsläppt CO2e/kWhel jämfört med motsvarande verk med ståltorn. Ett annat argumentför trätorn är förenklade transporter jämfört med t.ex. svetsade ståltorn eller hybridtornmed prefabricerade betongelement.Om tekniken etableras kan det i förlängningen leda till en regional påverkan i form av ökatlokalt innehåll i vindkraftprojekten t.ex. genom ökade råvaruleveranser (eg. sågat ochtorkat virke), lokal produktion av korslimmat limträ eller exempelvis bildande avspecialiserade montagefirmor. Det största hindret för tekniken just nu är dessmarknadsintroduktion och acceptans samt typgodkännande tillsammans med en för svenskmarknad intressant turbinleverantör. För att få acceptans för tekniken krävs byggande ochutvärdering av minst ett verk med trätorn. En intressant storlek för marknaden är en 2-3MW turbin med navhöjd ca 140 m. Ett sådant verk skulle i så fall få det högstavindkrafttornet i Sverige och sannolikt det högsta vindkrafttornet i trä i världen. Byggandetav ett första verk med trätorn skulle sannolikt även kräva ett behov av stödfinansiering föratt täcka en projektörs ökade risk. Då flera vindkraftetableringar i regionen uppvisar godaproduktionsresultat (med Tavelberget som gott exempel) visar det att regionen ärintressant för introduktion och utvärdering av ny teknologi.

Simulation and optimisation techniques for sawmill yard operation : A literature review

Increasing costs and competitive business strategies are pushing sawmill enterprises to make an effort for optimization of their process management. Organizational decisions mainly concentrate on performance and reduction of operational costs in order to maintain profit margins. Although many efforts have been made, effective utilization of resources, optimal planning and maximum productivity in sawmill are still challenging to sawmill industries. Many researchers proposed the simulation models in combination with optimization techniques to address problems of integrated logistics optimization. The combination of simulation and optimization technique identifies the optimal strategy by simulating all complex behaviours of the system under consideration including objectives and constraints. During the past decade, an enormous number of studies were conducted to simulate operational inefficiencies in order to find optimal solutions. This paper gives a review on recent developments and challenges associated with simulation and optimization techniques. It was believed that the review would provide a perfect ground to the authors in pursuing further work in optimizing sawmill yard operations.

Multi-agent simulation of sawmill yard operations

This paper reports the findings of using multi-agent based simulation model to evaluate the sawmill yard operations within a large privately owned sawmill in Sweden, Bergkvist Insjön AB in the current case. Conventional working routines within sawmill yard threaten the overall efficiency and thereby limit the profit margin of sawmill. Deploying dynamic work routines within the sawmill yard is not readily feasible in real time, so discrete event simulation model has been investigated to be able to report optimal work order depending on the situations. Preliminary investigations indicate that the results achieved by simulation model are promising. It is expected that the results achieved in the current case will support Bergkvist-Insjön AB in making optimal decisions by deploying efficient work order in sawmill yard.

Simulation model using meta heuristic algorithms for achieving optimal arrangement of storage bins in a sawmill yard

Bin planning (arrangements) is a key factor in the timber industry. Improper planning of the storage bins may lead to inefficient transportation of resources, which threaten the overall efficiency and thereby limit the profit margins of sawmills. To address this challenge, a simulation model has been developed. However, as numerous alternatives are available for arranging bins, simulating all possibilities will take an enormous amount of time and it is computationally infeasible. A discrete-event simulation model incorporating meta-heuristic algorithms has therefore been investigated in this study. Preliminary investigations indicate that the results achieved by GA based simulation model are promising and better than the other meta-heuristic algorithm. Further, a sensitivity analysis has been done on the GA based optimal arrangement which contributes to gaining insights and knowledge about the real system that ultimately leads to improved and enhanced efficiency in sawmill yards. It is expected that the results achieved in the work will support timber industries in making optimal decisions with respect to arrangement of storage bins in a sawmill yard.