Making land-use fit to planning goals. Weaknesses and opportunities within the Swiss land management regime

In Switzerland, the issue of land consumption has made it to the front of the political agenda in recent years. Studies conducted on a national level have concluded that there is an excess of land zoned for construction (ARE, 2008), which is seen as contributing to urban sprawl. This situation is looked upon as a failure of the Federal Law on Spatial Planning (LAT, 1979) and there is a political push to change it in order to reinforce zoning regulations. In this article, we look on the issue from a different angle. While there may be large quantities of land zoned for construction, in many urban areas land actually available for development is scarce. Building on the idea that planning's efficiency is linked to its capacity of influencing actual land-use, we focus on how this situation can be dealt with within the current Swiss institutional context.

2008 Annual Report Capitol Planning Commission, January 2009

The Capitol Planning Commission is authorized under Chapter 8A.371—378 of the Code of Iowa. “It shall be the duty of the commission to advise upon the location of statues, fountains and monuments and the placing of any additional buildings on the capitol grounds, the type of architecture and the type of construction of any new buildings to be erected on the state capitol grounds as now encompassed or as subsequently enlarged, and repairs and restoration thereof, and it shall be the duty of the officers, commissions, and councils charged by law with the duty of determining such questions to call upon the commission for such advice. “The commission shall, in cooperation with the director of the department of administrative services, develop and implement within the limits of its appropriation, a five-year modernization program for the capitol complex. “The commission shall annually report to the general assembly its recommendations relating to its duties under this section. The report shall be submitted to the chief clerk of the house and the secretary of the senate during the month of January.” —Code of Iowa, Chapter 8A.373

A diagram of public spaces within urban landscape as a strategy for sustainable urban planning in Chinese cities

Destruction of historical urban fabric in many Chinese cities and towns, without the possibility of its recovery as an urban asset, leads us to consider alternative strategies and criteria for formulating new urban projects, using creative urban planning instruments and strategies to provide a sense of place and identity to the urban landscape. The challenge is to set up an urban structure that constitutes a spatial reference system, a structure consisting of a set of urban landmarks that construct a system of related public spaces, endowed with collective significance and identity. Such a network could include a wide variety of urban typologies and natural elements. An important result of this strategy would be the recovery of the social and cultural values attached to the natural landscape in Chinese civilization. Hangzhou city will be analyzed as a case study

Sustainability of the Peruvian anchoveta supply chains from sea to shelf: towards a new strategy for optimal use of resources

The research performed a sustainability assessment of supply chains of the anchoveta (Engraulis ringens) in Peru. The corresponding fisheries lands 6.5 million t per year, of which <2% is rendered into products for direct human consumption (DHC) and 98% reduced into feed ingredients (fishmeal and fish oil, FMFO), for export. Several industries compete for the anchoveta resources, generating local and global impacts. The need for understanding these dynamics, towards sustainability-improving management and policy recommendations, determined the development of a sustainability assessment framework: 1) characterisation and modelling of the systems under study (with Life Cycle Assessment and other tools) including local aquaculture, 2) calculation of sustainability indicators (i.e. energy efficiency, nutritional value, socio-economic performances), and 3) sustainability comparison of supply chains; definition and comparison of alternative exploitation scenarios. Future exploitation scenarios were defined by combining an ecosystem and a material flow models: continuation of the status quo (Scenario 1), shift towards increased proportion of DHC production (Scenario 2), and radical reduction of the anchoveta harvest in order for other fish stocks to recover and be exploited for DHC (Scenario 3). Scenario 2 was identified as the most sustainable. Management and policy recommendations include improving of: controls for compliance with management measures, sanitary conditions for DHC, landing infrastructure for small- and medium-scale (SMS) fisheries; the development of a national refrigerated distribution chain; and the assignation of flexible tolerances for discards from different DHC processes.

Model-based Segmentation and Fusion of 3D Computed Tomography and 3D Ultrasound of the Eye for Radiotherapy Planning

Computed Tomography (CT) represents the standard imaging modality for tumor volume delineation for radiotherapy treatment planning of retinoblastoma despite some inherent limitations. CT scan is very useful in providing information on physical density for dose calculation and morphological volumetric information but presents a low sensitivity in assessing the tumor viability. On the other hand, 3D ultrasound (US) allows a highly accurate definition of the tumor volume thanks to its high spatial resolution but it is not currently integrated in the treatment planning but used only for diagnosis and follow-up. Our ultimate goal is an automatic segmentation of gross tumor volume (GTV) in the 3D US, the segmentation of the organs at risk (OAR) in the CT and the registration of both modalities. In this paper, we present some preliminary results in this direction. We present 3D active contour-based segmentation of the eye ball and the lens in CT images; the presented approach incorporates the prior knowledge of the anatomy by using a 3D geometrical eye model. The automated segmentation results are validated by comparing with manual segmentations. Then, we present two approaches for the fusion of 3D CT and US images: (i) landmark-based transformation, and (ii) object-based transformation that makes use of eye ball contour information on CT and US images.

A participatory approach to tactical forest planning

Jyrki Kangas ... [et al.]

Plan de seguridad y salud para el suministro y montaje del Parque Eólico Rancho Viejo en el T.M. de Medina-Sidonia (Cádiz)

No hace más de 3 años se podía leer en las revistas especializadas que España había pasado a ocupar el tercer puesto en el ranking mundial por potencia eólica instalada. La industria eólica española a su vez ha pasado a ocupar el tercer puesto en la fabricación e instalación de aerogeneradores, con una cuota de mercado del 13%, siendo así un sector con gran capacidad de exportación. Por otra parte, tras diez años de promulgación de la Ley 31/95, de 8 de noviembre, de Prevención de Riesgos Laborales, y después su desarrollo reglamentario, es un hecho incontestable que, pese a todo, y a los ingentes esfuerzos realizados por los distintos actores implicados en la prevención de riesgos laborales (Estado, Comunidades Autónomas, Agentes Sociales, Entidades especializadas, etcetera), existe un sector como el de la construcción que, constituyendo uno de los ejes del crecimiento económico de nuestro país, está sometido a unos riesgos especiales y continúa registrando una siniestralidad laboral muy notoria por sus cifras y gravedad. La legislación de prevención, los manuales sobre las distintas disciplinas preventivas, los libros especializados, los expertos... han abordado ya, con mayor o menor acierto, muchas de las cuestiones generales y específicas que afectan a la seguridad y salud: la evaluación de riesgos, las medidas higiénicas, los equipos de trabajo y equipos de protección individual, la planificación, la formación, los servicios de prevención , los sistemas de gestión de la prevención, las auditorías ... forman parte de los contenidos que se han ido creando en torno a este tema. No obstante, resulta de gran interés la elaboración de un estudio de Seguridad y Salud, en el que partiendo de un desarrollo técnico concreto, pero sobre todo integral, es decir, que comprenda todas las fases para el suministrp e instalación de aerogeneradores para un parque eólico, vayamos desgranando cada uno de los puntos desarrollados en su construcción. Entre las conclusiones más destacadas de este trabajo, se encuentra la definición de las condiciones relativas a la prevención de accidentes y enfermedades laborales durante la ejecución de los trabajos de suministro e instalación de un parque eólico y la gestión de su prevención, las características de las instalaciones preceptivas para higiene y bienestar de los trabajadores, así como directrices básicas mínimas, que deben reflejarse y desarrollarse en el Plan de Seguridad y Salud que las empresas contratistas deberán presentar para su aprobación por el director de obra, antes del comienzo de los trabajos, de forma que sea posible la disminución de accidentes laborales así como evitar las posibles sanciones administrativas y/o penales.

Sistemes logístics de codificació i identificació, i perspectives de futur

Comptar amb sistemes sofisticats de gestió o programes ERP (Enterprise Resource Planning) no és suficient per a les organitzacions. Per a què aquests recursos donin resultats adequats i actualitzats, la informació d’entrada ha de llegir-se de forma automàtica, per aconseguir estalviar en recursos, eliminació d’errors i assegurar el compliment de la qualitat. Per aquest motiu és important comptar amb eines i serveis d’identificació automàtica i col•lecció de dades. Els principals objectius a assolir (a partir de la introducció al lector de la importància dels sistemes logístics d’identificació en un entorn global d’alta competitivitat), són conèixer i comprendre el funcionament de les tres principals tecnologies existents al mercat (codis de barres lineals, codis de barres bidimensionals i sistemes RFID), veure en quin estat d’implantació es troba cadascuna i les seves principals aplicacions. Un cop realitzat aquest primer estudi es pretén comparar les tres tecnologies per o poder obtenir perspectives de futur en l’àmbit de l’autoidentificació. A partir de la situació actual i de les necessitats de les empreses, juntament amb el meravellós món que sembla obrir la tecnologia RFID (Radio Frequency Identification), la principal conclusió a la que s’arribarà és que malgrat les limitacions tècniques dels codis de barres lineals, aquests es troben completament integrats a tota la cadena logística gràcies a l’estandarització i la utilització d’un llenguatge comú, sota el nom de simbologies GTIN (Global Trade Item Number), durant tota la cadena de subministres que garanteixen total traçabilitat dels productes gràcies en part a la gestió de les bases de dades i del flux d’informació. La tecnologia RFUD amb l’EPC (Electronic Product Code) supera aquestes limitacions, convertint-se en el màxim candidat per a substituir els limitats codis de barres. Tot i això, RFID, amb l’EPC, no serà un adequat identificador logístic fins que es superin importants barreres, com són la falta d’estandarització i l’elevat cost d’implantació.

A game theoretic simulation model for quality oriented timber supply to sawmills

Summary

B2B Integration in Global Supply Chains: An Identification of Technical Integration Scenarios

The competitiveness of businesses is increasingly dependent on their electronic networks with customers, suppliers, and partners. While the strategic and operational impact of external integration and IOS adoption has been extensively studied, much less attention has been paid to the organizational and technical design of electronic relationships. The objective of our longitudinal research project is the development of a framework for understanding and explaining B2B integration. Drawing on existing literature and empirical cases we present a reference model (a classification scheme for B2B Integration). The reference model comprises technical, organizational, and institutional levels to reflect the multiple facets of B2B integration. In this paper we onvestigate the current state of electronic collaboration in global supply chains focussing on the technical view. Using an indepth case analysis we identify five integration scenarios. In the subsequent confirmatory phase of the research we analyse 112 real-world company cases to validate these five integration scenarios. Our research advances and deepens existing studies by developing a B2B reference model, which reflects the current state of practice and is independent of specific implementation technologies. In the next stage of the research the emerging reference model will be extended to create an assessment model for analysing the maturity level of a given company in a specific supply chain.

Administrative Transition Planning Notebook, November 15, 2006

Seven Years ofInnovation, Technological Advances, Enhanced Service & Fluid Commerce in the Iowa Alcoholic Beverages Division.

Literature review on advance care planning of nursing home residents

Aim: Conduct a search and analytic review of literature regarding attributes of Advance Care Planning (ACP) and Advance Directive in order to identify the experiences and the best care strategies for older adults resident in nursing homes or long term institutions. Methodology: An extensive electronic search was undertaken in the following databases: Pubmed (via Ovid search), Cumulative Index of Nursing and Allied Health (CINAHL, via EBHOST), psychINFO and Cochrane. After analyzing and eliminating duplicates and professional's point of view (19), 144 titles were considered relevant: 28 opinion papers, 94 descriptive/qualitative studies or predictive studies, 17 experimental and five systematic reviews. Most of them were produced in North America and only 10 were in French. Results: With regard to European experiences, studies are scarce and further research could benefit from North American evidence. Contrary to Europe, nurses in North America play a major role in the process of care planning. The major findings were related to the poor efficacy of the completion of Advance Directives, even in presence of a substantial variety of implementation strategies. The evidence supports interventions that conceptualize ACP as a process, with an emphasis on the ascertainment of patients' values and beliefs and the necessity to include the family or loved ones from the beginning of the process in order to favor the expression and sharing of one's life perspectives and priorities in care. The most relevant findings were associated with the conceptualization of the ACP as a change in health behaviors which needs an involvement in different stages to overcome a variety of barriers. Conclusion: Rigorous research in ACP for the older adults in Swiss nursing homes that promote respect and dignity in this frail population is needed. How to best achieve patients and families goals should be the focus of nursing intervention and research in this domain.