Development of a software model of a heavy vehicle suspension for research

A Simulink Matlab control system of a heavy vehicle suspension has been developed. The aim of the exercise presented in this paper was to develop a Simulink Matlab control system of a heavy vehicle suspension. The objective facilitated by this outcome was the use of a working model of a heavy vehicle (HV) suspension that could be used for future research. A working computer model is easier and cheaper to re-configure than a HV axle group installed on a truck; it presents less risk should something go wrong and allows more scope for variation and sensitivity analysis before embarking on further "real-world" testing. Empirical data recorded as the input and output signals of a heavy vehicle (HV) suspension were used to develop the parameters for computer simulation of a linear time invariant system described by a second-order differential equation of the form: (i.e. a "2nd-order" system). Using the empirical data as an input to the computer model allowed validation of its output compared with the empirical data. The errors ranged from less than 1% to approximately 3% for any parameter, when comparing like-for-like inputs and outputs. The model is presented along with the results of the validation. This model will be used in future research in the QUT/Main Roads project Heavy vehicle suspensions – testing and analysis, particularly so for a theoretical model of a multi-axle HV suspension with varying values of dynamic load sharing. Allowance will need to be made for the errors noted when using the computer models in this future work.

The Australian Grey Nomads : are they who we think they are? Enhancing formative research through the quantitative assessment of psychological constructs

Issue addressed: Measures of 'social identity' and 'psychological sense of community' were included within a broader formative research inquiry to gain insight into the identity characteristics and level of connectedness among older recreational road travellers (commonly known as Grey Nomads). The research sought to gain insights on how best to reach or speak to this growing driver cohort. ----- ----- Method: Participants included 631 older recreational road travellers ranging in age from 50 years to over 80 years. Data were obtained through three scales which were incorporated into a larger formative research survey; an identity hierarchy, the Three Factor Model of Social Identity and the Sense of Community Index. ----- ----- Results: Older recreational road travellers see themselves principally as couples, with social group identity being secondary. Although many identified to some degree with the Grey Nomad identity, when asked to self categorise as either members of the Broad Network of Recreational Vehicle Travellers or as Grey Nomads, the majority categorised themselves as the former. Those identifying as Grey Nomads, however, reported significantly higher levels of 'social identification' and 'sense of community'. ----- ----- Conclusion: The Grey Nomad identity may not be the best identity at which to target road safety messages for this cohort. Targeting travelling 'couples' may be more efficacious. Using the 'Grey Nomad' identity is likely to reap at least some success, however, given that many identified to some degree with this group identity. Those identifying as Grey Nomads may be more open to community participation or behaviour change given their significantly higher levels of 'social identity' and 'sense of community'.

The role of the research system in 'Learning Economies'

This paper provides a framework for analysing the role of Australia’s research system in promoting national economic development. The paper is in two parts. Part One focuses on knowledge diffusion and technological development and emphasises the systemic nature of innovation processes within the emerging context of ‘learning economies’. The key understandings relevant to a nation’s research system are drawn out from contemporary developments in the international literature on ‘learning economies’. Some of the implications for Australia are discussed. The aim is to provide readers with some indications of what to look for in considering options for the future of Australia’s research system. More detailed information on relevant aspects of Australia’s industrial and trade structure, the extent of the R&D effort in industry and on issues such as management capability can be obtained from (Marceau et al 1997). In the second part, broad elements of the Australian research system are reviewed in the light of findings from the literature. The central role of universities in the innovation and research systems is described. Actions that can be taken by both universities and governments are suggested, particularly regarding the need to build and maintain efficient information flows at local, national and international levels. The paper briefly points to the nature of a research system capable of contributing effectively to the wealth of the nation and indicates some possible directions for enabling Australia to meet the demands of, and profit from, a knowledge-based economy.

Arts-based research in design education

There is an urgent need in terms of changing world conditions to move beyond the dualist paradigm that has traditionally informed design research, education and practice. Rather than attempt to reduce uncertainty, novelty and complexity as is the conventional approach, an argument is presented in this article that seeks to exploit these qualities through a reconceptualisation of design in creative as well as systematic, rigorous and ethical terms. Arts-based research, which 'brings together the systematic and rigorous qualities of inquiry with the creative and imaginative qualities of the arts', is presented as being central to this reconceptualisation. This is exemplified in the application of art-informed inquiry in a research unit for graduating tertiary-level interior design students. The application is described in this article and is shown to rely substantially on the image and its capacity to open up and reveal new possibilities and meaning.

Panel studies of new venture creation: a methods-focused review and suggestions for future research

Longitudinal panel studies of large, random samples of business start-ups captured at the pre-operational stage allow researchers to address core issues for entrepreneurship research, namely, the processes of creation of new business ventures as well as their antecedents and outcomes. Here, we perform a methods-orientated review of all 83 journal articles that have used this type of data set, our purpose being to assist users of current data sets as well as designers of new projects in making the best use of this innovative research approach. Our review reveals a number of methods issues that are largely particular to this type of research. We conclude that amidst exemplary contributions, much of the reviewed research has not adequately managed these methods challenges, nor has it made use of the full potential of this new research approach. Specifically, we identify and suggest remedies for context-specific and interrelated methods challenges relating to sample definition, choice of level of analysis, operationalization and conceptualization, use of longitudinal data and dealing with various types of problematic heterogeneity. In addition, we note that future research can make further strides towards full utilization of the advantages of the research approach through better matching (from either direction) between theories and the phenomena captured in the data, and by addressing some under-explored research questions for which the approach may be particularly fruitful.

The future of entrepreneurship research

In the summer of 2008, the Jönköping International Business School invited a selection of prominent (and not yet past-zenith) scholars of our field to a workshop at which they were asked to present their visions about where the future of entrepreneurship research is headed. An important inspiration for this initiative was a similar gathering in Jönköping 10 years earlier, which led to a special issue of Entrepreneurship Theory and Practice that has become one of the most cited in the history of the journal (see Davidsson, Low, &Wright, 2001). Similarly, the current special issue is based on the ideas that were first presented at the 2008 workshop, although they have since been thoroughly discussed and developed through extensive commentary and revisions.

Integrating Responses to Homelessness: The Contribution of Participatory Action Research

In recent years Participatory Action Research (PAR) and other collaborative inquiry processes have been used in a wide variety of program and service contexts. Early childhood services, Indigenous services, youth drug and alcohol services, and education and vocational training support services have all been sites where PAR has been utilized. Action research is important as it helps improve policy and ensures that best practice and experience can be shared.

Identifying good re-engagement practice : case studies from Brisbane North and West Youth Connections action research

This report summarises the action research undertaken by the Brisbane North and West Youth Connections Consortium during 2010 and facilitated by staff from QUT. The Consortium consists of a lead agency which undertakes both program coordination and direct service delivery (Brisbane Youth Service) and four other agencies across the region who undertake direct service delivery. Funds for Youth Connections are provided by the Australian Government Department of Education, Employment and Workplace Relations. This report describes and analyses the participatory action research (PAR) undertaken in 2011, including eight case studies exploring questions seen as important to the re-engagement of young people in education and training.

Preclinical animal models for segmental bone defect research and tissue engineering

Currently, well-established clinical therapeutic approaches for bone reconstruction are restricted to the transplantation of autografts and allografts, and the implantation of metal devices or ceramic-based implants to assist bone regeneration. Bone grafts possess osteoconductive and osteoinductive properties, however they are limited in access and availability and associated with donor site morbidity, haemorrhage, risk of infection, insufficient transplant integration, graft devitalisation, and subsequent resorption resulting in decreased mechanical stability. As a result, recent research focuses on the development of alternative therapeutic concepts. Analysing the tissue engineering literature it can be concluded that bone regeneration has become a focus area in the field. Hence, a considerable number of research groups and commercial entities work on the development of tissue engineered constructs for bone regeneration. However, bench to bedside translations are still infrequent as the process towards approval by regulatory bodies is protracted and costly, requiring both comprehensive in vitro and in vivo studies. In translational orthopaedic research, the utilisation of large preclinical animal models is a conditio sine qua non. Consequently, to allow comparison between different studies and their outcomes, it is essential that animal models, fixation devices, surgical procedures and methods of taking measurements are well standardized to produce reliable data pools as a base for further research directions. The following chapter reviews animal models of the weight-bearing lower extremity utilized in the field which include representations of fracture-healing, segmental bone defects, and fracture non-unions.

A literature review on research methodologies of gross pollutant traps

This paper presents a comprehensive review of scientific and grey literature on gross pollutant traps (GPTs). GPTs are designed with internal screens to capture gross pollutants—organic matter and anthropogenic litter. Their application involves professional societies, research organisations, local city councils, government agencies and the stormwater industry—often in partnership. In view of this, the 113 references include unpublished manuscripts from these bodies along with scientific peer-reviewed conference papers and journal articles. The literature reviewed was organised into a matrix of six main devices and nine research areas (testing methodologies) which include: design appraisal study, field monitoring/testing, experimental flow fields, gross pollutant capture/retention characteristics, residence time calculations, hydraulic head loss, screen blockages, flow visualisations and computational fluid dynamics (CFD). When the fifty-four item matrix was analysed, twenty-eight research gaps were found in the tabulated literature. It was also found that the number of research gaps increased if only the scientific literature was considered. It is hoped, that in addition to informing the research community at QUT, this literature review will also be of use to other researchers in this field.

Establishing Aboriginal health research priorities in Victoria

Short overview of the VACCHO Social Determinants Research Forum (2010).

Participatory action research workbook

Provides a structure and a series of proformas for documenting a participatory action research (PAR) process. Includes tools for documenting PAR questions, documenting each element of the PAR cycle, and for writing a case study. Users can write into the word version of this workbook so it provides an ongoing record of the PAR process used.

Parliamentary inquiry into alcohol-related violence

Alcohol consumption has been a popular leisure activity among Australian since European Settlement. Australians currently consume 7.2 litres per capita pure alcohol and Australia in regards to alcohol consumption is ranked as the 22nd highest country of 58 countries. Although the alcohol industry has provided leisure, employment and government taxes, alcohol use has also become associated with chronic health problems, crime, public disorder and violence. Drunken and disorderly behaviour is commonly associated with Pubs, Clubs and Hotels, particularly in the late night entertainment areas. Historically, drunkenness and disorderly behaviour has been managed by measures such as floggings, jail and treatment in asylums. Alcohol has also been banned in specific areas and restrictions have applied to hours and days of operation. In more recent times alcohol policies have included extended trading hours, restricted trading hours and bans in some Aboriginal communities in order to reduce alcohol-related violence. Community and business partnerships in and around licensed premises have also developed in order to address the noise, violence and disorderly behaviour that often occurs in the evenings and early mornings. There is an urgent need for the government to be more robust about implementing effective alcohol control policies in order to prevent and reduce the harmful effects of alcohol.