A hedging point strategy - balancing effluent quality, economy and robustness in the control of wastewater treatment plants

An operational space map is an efficient tool to compare a large number of operational strategies to find an optimal choice of setpoints based on a multicriterion. Typically, such a multicriterion includes a weighted sum of cost of operation and effluent quality. Due to the relative high cost of aeration such a definition of optimality result in a relatively high fraction of the effluent total nitrogen in the form of ammonium. Such a strategy may however introduce a risk into operation because a low degree of ammonium removal leads to a low amount of nitrifiers. This in turn leads to a reduced ability to reject event disturbances, such as large variations in the ammonium load, drop in temperature, the presence of toxic/inhibitory compounds in the influent etc. Hedging is a risk minimisation tool, with the aim to "reduce one's risk of loss on a bet or speculation by compensating transactions on the other side" (The Concise Oxford Dictionary (1995)). In wastewater treatment plant operation hedging can be applied by choosing a higher level of ammonium removal to increase the amount of nitrifiers. This is a sensible way to introduce disturbance rejection ability into the multi criterion. In practice, this is done by deciding upon an internal effluent ammonium criterion. In some countries such as Germany, a separate criterion already applies to the level of ammonium in the effluent. However, in most countries the effluent criterion applies to total nitrogen only. In these cases, an internal effluent ammonium criterion should be selected in order to secure proper disturbance rejection ability.

Agents as multi-threaded logical objects

In this paper we describe a distributed object oriented logic programming language in which an object is a collection of threads deductively accessing and updating a shared logic program. The key features of the language, such as static and dynamic object methods and multiple inheritance, are illustrated through a series of small examples. We show how we can implement object servers, allowing remote spawning of objects, which we can use as staging posts for mobile agents. We give as an example an information gathering mobile agent that can be queried about the information it has so far gathered whilst it is gathering new information. Finally we define a class of co-operative reasoning agents that can do resource bounded inference for full first order predicate logic, handling multiple queries and information updates concurrently. We believe that the combination of the concurrent OO and the LP programming paradigms produces a powerful tool for quickly implementing rational multi-agent applications on the internet.

Modelling of microstructure formation and evolution during solidification

A comprehensive probabilistic model for simulating microstructure formation and evolution during solidification has been developed, based on coupling a Finite Differential Method (FDM) for macroscopic modelling of heat diffusion to a modified Cellular Automaton (mCA) for microscopic modelling of nucleation, growth of microstructures and solute diffusion. The mCA model is similar to Nastac's model for handling solute redistribution in the liquid and solid phases, curvature and growth anisotropy, but differs in the treatment of nucleation and growth. The aim is to improve understanding of the relationship between the solidification conditions and microstructure formation and evolution. A numerical algorithm used for FDM and mCA was developed. At each coarse scale, temperatures at FDM nodes were calculated while nucleation-growth simulation was done at a finer scale, with the temperature at the cell locations being interpolated from those at the coarser volumes. This model takes account of thermal, curvature and solute diffusion effects. Therefore, it can not only simulate microstructures of alloys both on the scale of grain size (macroscopic level) and the dendrite tip length (mesoscopic level), but also investigate nucleation mechanisms and growth kinetics of alloys solidified with various solute concentrations and solidification morphologies. The calculated results are compared with values of grain sizes and solidification morphologies of microstructures obtained from a set of casting experiments of Al-Si alloys in graphite crucibles.

A review of the flower characteristics of Geraldton waxflower and factors influencing their abscission from harvested stems

Geraldton waxflower (Chamelaucium uncinatum Schauer) is Australia's most economically important cut-flower export. Its small, attractive flowers make it particularly suitable as a filler in floral arrangements. However, postharvest bud and flower abscission is a major problem during transport, handling and marketing. Abscission may be caused by wound-induced endogenous ethylene production brought about by flower tissue infection with fungal pathogens such as Botrytis cinerea. Botany and postharvest characteristics are discussed in relation to flower abscission and how resultant postharvest losses may be minimised.

Practical and economic advantages of choice feeding systems for laying poultry

Poultry can be managed under different feeding systems, depending on the husbandry skills and the feed available. These systems include the following: (1) a complete dry feed offered as a mash ad libitum; (2) the same feed offered as pellets or crumbles ad libitum; (3) a complete feed with added whole grain; (4) a complete wet feed given once or twice a day; (5) a complete feed offered on a restricted basis; (6) choice feeding. Of all these, an interesting alternative to offering complete diets is choice feeding which can be applied on both a small or large commercial scale. Under choice feeding or free-choice feeding birds are usually offered a choice between three types of feedstuffs: (a) an energy source (e.g. maize, rice bran, sorghum or wheat); (b) a protein source (e.g. soyabean meal, meat meal, fish meal or coconut meal) plus vitamins and minerals and (c), in the case of laying hens, calcium in granular form (i.e. oyster-shell grit). This system differs from the modern commercial practice of offering a complete diet comprising energy and protein sources, ground and mixed together. Under the complete diet system, birds are mainly only able to exercise their appetite for energy. When the environmental temperature varies, the birds either over- or under-consume protein and calcium. The basic principle behind practising choice feeding with laying hens is that individual hens are able to select from the various feed ingredients on offer and compose their own diet, according to their actual needs and production capacity. A choice-feeding system is of particular importance to small poultry producers in developing countries, such as Indonesia, because it can substantially reduce the cost of feed. The system is flexible and can be constructed in such a way that the various needs of a flock of different breeds, including village chickens, under different climates can be met. The system also offers a more effective way to use home-produced grain, such as maize, and by-products, such as rice bran, in developing countries. Because oyster-shell grit is readily available in developing countries at lower cost than limestone, the use of cheaper oyster-shell grit can further benefit small-holders in these countries. These benefits apart, simpler equipment suffices when designing and building a feed mixer on the farm, and transport costs are lower. If whole (unground) grain is used, the intake of which is accompanied by increased efficiency of feed utilisation, the costs of grinding, mixing and many of the handling procedures associated with mash and pellet preparation are eliminated. The choice feedstuffs can all be offered in the current feed distribution systems, either by mixing the ingredients first or by using a bulk bin divided into three compartments.

Social rules for managing attempted interpersonal domination in the workplace: Influence of status and gender.

The present study utilized a social rules approach to investigate the relative influence of gender and status on managers' self-evaluations of their effectiveness in handling a dominating subordinate. In the first study 84 White middle-class participants identified the prescriptive and proscriptive rules for socially appropriate responding to a stimulus situation involving a pushy subordinate. Four rule sets were identified for female and male managers and subordinates, respectively. Rule-sets shared a number of common rules and showed some variation according to gender roles. In the second study, 91 White middle-class participants rated the individual rules for importance and also rated their personal and managerial effectiveness when responding to the stimulus situation using gender- and status-consistent and gender-and status-inconsistent response strategies. Both men and women rated the female gender and status- consistent strategy as most effective, and rated the status-inconsistent strategy as less effective than a gender-inconsistent response. Results were interpreted as providing more support for a situational gender-related theory of workplace behavior, rather than a traditional gender role perspective.

The Utility of the Human Security Agenda for Policy-makers

The idea of “human security” is gaining attention among policy-makers and security analysts. Little scholarly attention has been given to the questions of why states accept (or reject) a human security agenda or how such an agenda is incorporated into policy practices. The article suggests that a human security approach is most likely to be applied when both humanitarian and national interests combine. Yet when states or organisations adopt a human security approach, they often misjudge the complex and long-term commitment required of such an approach. There is also the potential for such an agenda to be manipulated to justify questionable courses of action. These issues frame an analysis of six recent case studies.

Acoplamentos: um estudo sobre a intera????o entre humanos e computadores

Este estudo investiga a intera????o dos humanos com os computadores pessoais. A partir dos inc??modos produzidos por esses encontros, na primeira parte estuda-se a produ????o da m??quina ???amig??vel??? ??? que insinua compara????es com a mente humana ??? e seus fortes efeitos nas transforma????es culturais do final do s??culo XX. Na segunda parte do trabalho, a partir de entrevistas de trabalhadores falando sobre sua aprendizagem b??sica do uso de computadores pessoais, faz-se uma an??lise das principais concep????es sobre a rela????o homem-t??cnica que est??o influenciando a intera????o humano-computador. Com isso fica evidenciado o papel do computador na crise do sujeito moderno, e afirma-se a necessidade de se pensar a subjetividade para al??m da cl??ssica divis??o sujeito-objeto, homem m??quina, natureza-artif??cio... o que aponta para a id??ia de acoplamentos flex??veis entre humanos e computadores e pede por uma no????o de aprendizagem que acolha a cria????o de problemas como seu aspecto mais rico.

Ventricular performance and Na+-K+ ATPase activity are reduced early and late after myocardial infarction in rats

Myocardial infarction leads to compensatory ventricular remodeling. Disturbances in myocardial contractility depend on the active transport of Ca2+ and Na+, which are regulated by Na+-K+ ATPase. Inappropriate regulation of Na+-K+ ATPase activity leads to excessive loss of K+ and gain of Na+ by the cell. We determined the participation of Na+-K+ ATPase in ventricular performance early and late after myocardial infarction. Wistar rats (8-10 per group) underwent left coronary artery ligation (infarcted, Inf) or sham-operation (Sham). Ventricular performance was measured at 3 and 30 days after surgery using the Langendorff technique. Left ventricular systolic pressure was obtained under different ventricular diastolic pressures and increased extracellular Ca2+ concentrations (Ca2+e) and after low and high ouabain concentrations. The baseline coronary perfusion pressure increased 3 days after myocardial infarction and normalized by 30 days (Sham 3 = 88 ± 6; Inf 3 = 130 ± 9; Inf 30 = 92 ± 7 mmHg; P < 0.05). The inotropic response to Ca2+e and ouabain was reduced at 3 and 30 days after myocardial infarction (Ca2+ = 1.25 mM; Sham 3 = 70 ± 3; Inf 3 = 45 ± 2; Inf 30 = 29 ± 3 mmHg; P < 0.05), while the Frank-Starling mechanism was preserved. At 3 and 30 days after myocardial infarction, ventricular Na+-K+ ATPase activity and contractility were reduced. This Na+-K+ ATPase hypoactivity may modify the Na+, K+ and Ca2+ transport across the sarcolemma resulting in ventricular dysfunction.

Atividade fungicida de triazóis obtidos a partir de glicerol sobre Colletotrichum gloeosporioides

A antracnose é responsável por significativos danos no pós-colheita em frutos de mamão, ocasionando expressivas perdas aos produtores. Desta forma, objetivou-se avaliar a eficiência de novas moléculas fungicidas do grupo dos triazóis obtidas a partir de glicerol no manejo in vitro de Colletotrichum gloeosporioides. O experimento foi conduzido em delineamento inteiramente casualizado, em esquema fatorial 18x5+1 (17 moléculas inéditas de triazóis (T1 a T17), 1 fungicida comercial (tebuconazol), cinco concentrações e uma testemunha adicional, com cinco repetições por tratamento. Para avaliar o efeito das moléculas no crescimento micelial e esporulação do fungo foi empregado o método de incorporação de cada molécula ao meio de cultura batata-dextrose-ágar nas concentrações de 1, 10, 100, 500 e 1000 ppm. Com base nos resultados obtidos foi observada diferença significativa entre os tratamentos e concentrações tanto para o crescimento micelial quanto esporulação, sendo que quanto maior a concentração testada maior o efeito fungistático e/ou fungicida dos compostos triazólicos. O efeito inibitório dos fungicidas foi maior sobre a esporulação do que no crescimento micelial, sendo os triazóis T12 e T14 os mais eficazes, havendo inibição completa do patógeno a partir das concentrações de 414,17 e 393,79 ppm, respectivamente. É válido ressaltar que além destes os triazóis T11, T16 e T17 também apresentaram completa inibição do patógeno em concentrações acima de 500 ppm, merecendo ser também estudados em experimentos futuros in vivo. Os valores médios de ED50 e ED100 foram menores para esporulação em relação ao crescimento micelial, demonstrando a eficiência antiesporulante dos novos triazóis sintetizados a partir do glicerol. Assim, conclui-se que compostos com anel 1,2,3-triazol sintetizados a partir do glicerol possuem atividade fungicida sobre C. gloeosporioides, sendo promissores para o manejo da antracnose em mamoeiro.

Modelagem e simulação de um secador intermitente de fluxos contracorrentes para frutos do cafeeiro

Este trabalho foi realizado com o objetivo de desenvolver um modelo computacional para simular a secagem de frutos café em um secador intermitente de fluxos contracorrente, empregando a linguagem de simulação EXTEND™ e o Modelo de Thompson (THOMPSON; PEART; FOSTER, 1968). Para validação do modelo desenvolvido foram utilizados dados experimentais obtidos por Silva (1991), em que foram empregados três níveis de temperatura do ar de secagem de 60, 80 e 100 °C. O modelo desenvolvido foi validado, sendo constatados desvios absolutos de 1,8% b.u e 1,1 kg e erros relativos de 11% e 1,6% na previsão dos parâmetros teor de água final e consumo de lenha, respectivamente. O modelo validado foi empregado na condução de experimentos tipo comparação de cenários. O primeiro experimento refere a alterações do ciclo operacional em que foram alterados os tempos de movimentação e de parada do fluxo da massa de grãos. E o segundo refere à alteração da configuração do secador quanto às alturas das câmaras de secagem e descanso. O ciclo operacional com os tempos de movimentação de um minuto e de parada de dezesseis minutos, para a temperatura do ar de secagem de 100 °C, proporcionou o melhor desempenho, sendo constatado tempo secagem de 12,3 h, consumo de lenha de 109,5 kg, consumo específico de energia de 7660 kJ.kg-1 de água evaporada, e capacidade de secagem de 87,86 kg.h-1. Quanto à configuração do secador, o melhor desempenho ocorreu para altura da câmara de secagem de 2,3 m usando a temperatura do ar de secagem de 100 °C, em que foram simulados tempo de secagem de 12,0 h, consumo de lenha de 106,5 kg, consumo específico de energia, de 7433 kJ.kg-1 de água evaporada, e capacidade de secagem de 90 kg.h-1. Desse modo, na condução da secagem de frutos de café em um secador intermitente de fluxos contracorrentes é recomendado o ciclo operacional com tempos de movimentação de um minuto e o de parada de dezesseis minutos, e não empregar a câmara de descanso. Essa conclusão está fundamentada em índices de desempenho do secador. Ressalta-se que não foram simulados os impactos nos parâmetros de qualidade.

Efeitos do isolamento social neonatal, da fluoxetina e do lactato desódio sobre o pânico experimental induzido por cianeto de potássio ou estimulação da matéria cinzenta periaquedutal em ratos

Os ataques de pânico (AP) podem ser precipitados pela inalação de dióxido de carbono (CO2 5%) ou pela infusão de lactato de sódio 0,5 mol/L (LAC) em pacientes predispostos, mas não nos indivíduos sadios ou pacientes com outros transtornos psiquiátricos. Estas e outras observações sugeriram que os AP sejam "alarmes falsos de sufocamento". O TP também caracteriza-se pela alta comorbidade com ansiedade de separação da infância (ASI). De fato, a ASI tem sido considerada como um fator predisponente tanto do pânico como da resistência aos panicolíticos. Estudos pré-clínicos do nosso laboratório mostraram, por outro lado, que a fluoxetina (FLX) atenua o pânico experimental à estimulação elétrica da matéria cinzenta periaquedutal dorsal (MCPAd) e à injeção de cianeto de potássio (KCN) em doses e regimes similares aos empregados na clínica. Adicionalmente, estes estudos mostraram que o isolamento social neonatal (ISN), um modelo de ASI, abole os efeitos panicolíticos da fluoxetina (1-2 mg.kg-1.dia-1, 21 dias) no modelo de pânico por estimulação da MCPAd. Portanto, o presente trabalho avaliou os efeitos da administração de 4 mg/kg de FLX (Estudo-1) e da infusão de uma solução 0,5 mol/L de LAC (Estudo-2) sobre as respostas de pânico à estimulação da MCPAd ou à injeção de KCN, respectivamente, em ratos submetidos ao isolamento social neonatal tanto efetivo (ISN) quanto fictício (ISF). No Estudo-1, ratos Wistar machos adultos submetidos ao ISN (3 h diárias) ou ao ISF (somente manipulação), ao longo da lactação, foram implantados com eletrodos na MCPAd e tratados com salina (0,9%, SAL) ou FLX (4 mg.kg-1.dia-1) ao longo de 21 dias. Nos ratos tratados com SAL, enquanto os limiares das respostas de pânico mantiveram-se praticamente inalterados no grupo ISF, eles foram progressivamente aumentados no grupo ISN. Os ratos tratados com FLX4 apresentaram limiares mais elevados que aqueles dos ratos tratados com SAL. A comparação aos limiares basais mostrou que a FLX4 teve efeitos diferenciados nos grupos ISF e ISN, aumentando ou reduzindo seus limiares, respectivamente. Embora não tenhamos observado diferenças dos efeitos da FLX4 sobre os limiares de pânico dos grupos ISN e ISF, as variações percentuais em relação à sessão de triagem indicam que a FLX4 teve efeitos até mesmo facilitadores. Estes resultados estendem observações anteriores da ausência de efeitos de doses menores de FLX nos ratos submetidos ao ISN. Por sua vez, o Estudo-2 mostrou que a infusão endovenosa de uma concentração clinicamente eficaz de LAC (0,5 mol/L) não tem efeito algum sobre o pânico induzido pelo KCN em ratos tanto virgens quanto submetidos ao ISF ou ISN. Embora os últimos resultados sugiram que os AP ao KCN (em ratos) e LAC (em humanos) envolvam mecanismos distintos, a conclusão definitiva requer experimentos adicionais com concentrações maiores de LAC.

Automated traffic route identification through the shared nearest neighbour algorithm

Many organisations need to extract useful information from huge amounts of movement data. One example is found in maritime transportation, where the automated identification of a diverse range of traffic routes is a key management issue for improving the maintenance of ports and ocean routes, and accelerating ship traffic. This paper addresses, in a first stage, the research challenge of developing an approach for the automated identification of traffic routes based on clustering motion vectors rather than reconstructed trajectories. The immediate benefit of the proposed approach is to avoid the reconstruction of trajectories in terms of their geometric shape of the path, their position in space, their life span, and changes of speed, direction and other attributes over time. For clustering the moving objects, an adapted version of the Shared Nearest Neighbour algorithm is used. The motion vectors, with a position and a direction, are analysed in order to identify clusters of vectors that are moving towards the same direction. These clusters represent traffic routes and the preliminary results have shown to be promising for the automated identification of traffic routes with different shapes and densities, as well as for handling noise data.

Conceptual design of a conveyer system for supporting basic quality of life of bedridden elderly people

With the increasing number of aged people, especially in developed countries, Ambient Assisted Living solutions have become an important subject to be explored and developed. Currently, as specialized Institutions in geriatric care cannot cope with the increasing requests for support of quality of life, patients have to remain at their homes having as caregiver the other member of the couple or a member of close family. A solution for supporting the caregiver, during assisting the bedridden person with some basic tasks as eating, taking a bath and/or hygiene care is of utmost importance. This paper presents an approach for supporting the caregiver in moving and repositioning the bedridden elderly people (BEP) with the assistance of a mechanical system conveyer. The conceptual design of the mechanical system must be devoted to assist the caregiver in the handling and repositioning of the BEP. The proposed mechatronic system must, ideally, minimize the system's handling complexity, reduce the number of caregivers and the amount of spended and needed effort.