Magnetic and gravity measurements on North-South profiles across the Grosse Meteor Bank, North Atlantic

During the first section of the "Meteor" cruise No. 2 a profile was run from the Azores to the south across the flanks of the Mid-Atlantic Ridge with a chain of seamounts. The profile extended between the Cruiser (living) and the Hyeres seamounts, which, according to our soundings, form a connected massif, and across the centre of the Grosse Meteor Bank (30°N, 28.5 °W). These seamounts rise from a depth of more than 4000 m up till close to the surface of the sea forming there a large almost flat plateau. In the case of the Grosse Meteor Bank, this plateau has a N-S extension of approx. 30 nautical miles and an E-W extension of approx. 20 nautical miles and reaches a height of 275 m in water depth. The gravity measurements yielded a density of the topographic masses of 2.6 g/cm**3 for the Grosse Meteor Bank. Magnitude and shape of the measured free-air anomaly are very well shown in a model computation with this density. The theoretical gravity effects of the seismically detected swell of cristalline rock and of the Moho depression (mountain root) are not indicated by the observational data. It can, therefore, be assumed that the latter two neutralize each other. It seems, accordingly, that there is no local isostatic compensation of the topographic masses. Hence, the density of 2.6 g/cm**3 obtained would be about the true density of rock. In connection with the mean velocity of P waves (Aric et al., 1968) obtained by seismic refraction methods it must be concluded that the material of the 1200-4000 m thick surface layer of the Grosse Meteor Bank consists of consolidated sediments. This finding is supported by the total intensity of the Earth's magnetic field over the Grosse Meteor Bank. On the assumption of a homogeneous magnetization in the direction of the present Earth's field, the computed anomaly of the massif deviates considerably from the measured anomaly while the magnetic field of the seismically detected crystalline body is capable of interpreting the observed data. Deviating from the prevailing interpretation of the seamounts' plateau as a volcanic cone with submarine abrasion, the Grosse Meteor Bank and the seamounts in the vicinity are assumed to be of continental origin. The questions whether these seamounts submerged later on or whether the sealevel has risen subsequently are, therefore, largely nonexistent.

Swath sonar bathymetry during POLARSTERN cruise ARK-XXII/1c (PS70) with links to multibeam raw data files

Multibeam data were measured as part of the project HERMES during R/V Polarstern cruise ARK-XXII/1 (2007-05-29 to 2007-07-25) along transits and survey profiles and partly during stationary work. Data were achieved mainly in the coastal areas of northern Norway, at the Hakon Mosby Mud Volcano at the continental margin approx. 200 nm off the norwegian coast and the AWI-Hausgarten area approx. 150 nm west of Svalbard. A number of surveys were carried out in the coastal areas of northern Norway (Sula Reef, Roest Reef, Traena area, Floholmen area, Sotbakken area) and around the area of the Hakon Mosby Mud Volcano. The multibeam sonar system Atlas Hydrosweep DS-2 (Atlas Hydrographic, http://www.atlashydro.com) was operated using 59 beams and 90° aperture angle. The refraction correction was achieved using CTD profiles measured during this cruise or, during transits, utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions (only in the AWI-Hausgarten area). This dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XXVI/3 (PS75) with links to multibeam raw data files

Multibeam data were collected during R/V Polarstern cruise ANT-XXVI/3 along track lines of about 10,400 NM total length along transits, survey profiles and during stationary work. Departing in New Zealand the ship passed Pacific Antarctic Ridge heading to Ross Sea. Main working area was the Amundsen Sea and Bellingshausen Sea. Recorded bathymetry is supplementing existing tracks e.g. of R.V. James Clark Ross and R.V. Nathaniel B. Palmer. The refraction correction was achieved utilizing CTD profiles or by the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ARK-XXII/1b (PS70) with links to multibeam raw data files

Multibeam data were measured as part of the project HERMES during R/V Polarstern cruise ARK-XXII/1 (2007-05-29 to 2007-07-25) along transits and survey profiles and partly during stationary work. Data were achieved mainly in the coastal areas of northern Norway, at the Hakon Mosby Mud Volcano at the continental margin approx. 200 nm off the norwegian coast and the AWI-Hausgarten area approx. 150 nm west of Svalbard. A number of surveys were carried out in the coastal areas of northern Norway (Sula Reef, Roest Reef, Traena area, Floholmen area, Sotbakken area) and around the area of the Hakon Mosby Mud Volcano. The multibeam sonar system Atlas Hydrosweep DS-2 (Atlas Hydrographic, http://www.atlashydro.com) was operated using 59 beams and 90° aperture angle. The refraction correction was achieved using CTD profiles measured during this cruise or, during transits, utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions (only in the AWI-Hausgarten area). This dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ARK-XXII/1a (PS70) with links to multibeam raw data files

Multibeam data were measured as part of the project HERMES during R/V Polarstern cruise ARK-XXII/1 (2007-05-29 to 2007-07-25) along transits and survey profiles and partly during stationary work. Data were achieved mainly in the coastal areas of northern Norway, at the Hakon Mosby Mud Volcano at the continental margin approx. 200 nm off the norwegian coast and the AWI-Hausgarten area approx. 150 nm west of Svalbard. A number of surveys were carried out in the coastal areas of northern Norway (Sula Reef, Roest Reef, Traena area, Floholmen area, Sotbakken area) and around the area of the Hakon Mosby Mud Volcano. The multibeam sonar system Atlas Hydrosweep DS-2 (Atlas Hydrographic, http://www.atlashydro.com) was operated using 59 beams and 90° aperture angle. The refraction correction was achieved using CTD profiles measured during this cruise or, during transits, utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions (only in the AWI-Hausgarten area). This dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XIX/5 (PS61) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XIX/5 along track lines of approximately 4000 NM total length in the Scotia Sea. Data were achieved along the Scotia Arc from Burdwood Bank to King George Island. A multibeam box survey was conducted at the southern part of the Discovery Rise, located at 50°55'S / 35°30'W and covering an area of 90 x 15 NM. A bathymetric survey of 25 x 60 NM was carried out at the eastern part of the South Shetland Trench and its intersection with the Shackleton Fracture Zone, continuing multibeam data from former expeditions. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle. The refraction correction was achieved utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XXVI/2 (PS75) with links to multibeam raw data files

Multibeam data were collected during R/V Polarstern cruise ANT-XXVI/2 along track lines of about 9,270 NM total length along transits, survey profiles and during stationary work. Departing in Punta Arenas the ship headed for its first main working area, the Eltanin Impact Area. In the following the ship's track crosses Pacific Antarctic Ridge and the corresponding fracture zones several times before arriving in Wellington. The refraction correction was achieved utilizing CTD profiles or by the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XIX/2 (PS61) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XIX/2 along track lines of about 6,100 NM total length along transits, survey profiles and during stationary work, mainly in the Weddell Sea. A multibeam survey was conducted in the eastern Weddell Sea at a potential earthquake area, located east of Fimbul Canyon. The tracks complemented data from former expeditions and extended the surveyed area to 60 by 80 NM. Data were achieved during the transit to the eastern Weddell Sea and by several wide spaced track lines at the continental margin east of Antarctic Peninsula. Between 66°30'S and 67°S a systematic survey of about 35 by 40 NM was carried out at a slump area. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle. The refraction correction was achieved utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Mineralogy of cold seep sediment inhabited by vesicomyid clams in the Japan Deep Sea Trench

Sediment sampling was performed at the center of the clam colony. Immediately after sample recovery onboard, the sediment core was sub-sampled and preserved for later analyses. Pyrite and carbonate content of the sediment was measured by X-ray refraction analysis as previously described (Ertefai et al., 2010).

Swath sonar bathymetry during POLARSTERN cruise ANT-XXII/2 (PS67) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XXII/2 along track lines of approximately 6800 NM total length during transits and the Ice Station POLarstern (ISPOL) experiment. Data were achieved during the transit from Cape Town via Bouvet Island towards Antarctic Peninsula for three weeks, crossing Agulhas Ridge, Agulhas Basin and Mid-Atlantic Ridge, and during the transit to Cape Town via South Georgia for two weeks. During the ISPOL station, data were gained while the vessel was drifting for five weeks anchored to an ice floe in the south-western Weddell Sea, starting at 68°13'S/54°47'W. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle. The refraction correction was achieved using CTD profiles or utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ARK-XXIII/3 (PS72) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ARK-XXIII/3 along track lines of 7248 NM total length in the Arctic Ocean during transits and stationary work. Data were achieved on the transit from Iceland through the Northwestern Passage and the Beaufort Sea to the East Siberian Sea, crossing Northwind Ridge and Chukchi Plateau. The continental margin of East Siberian was surveyed by several wide spaced transects for almost three weeks. The Mendeleev Ridge and the surrounding deep sea bassins were investigated by a transect of about 1000 NM length, located at 80°-81°N. Lomonosov Ridge and Gakkel Ridge were also crossed. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle, 120° in shallow water areas. The refraction correction was achieved utilizing 14 CTD profiles measured during the cruise or by the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XV/2 (PS47) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XV/2 along track lines of approximately 10200 NM total length during transits, surveys and partly during stationary work, mainly in the Scotia Sea and the Weddell Sea. Areal multibeam surveys were performed in the vicinity of the South Shetland trench, the Bransfield Basin, the South Sandwich trench, and off the Ekstrom Ice Shelf for time periods of three to eight days. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle, in some shallow areas 120°. The refraction correction was achieved utilizing sound velocity profiles sampled during the cruise, and by the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XXII/3 (PS67) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XXII/3 along track lines of approximately 8000 NM total length during transits and partly during stationary work. Data were achieved on a transect along the Greenwich meridian, across the Weddell Sea from Kapp Norvegia to Joinville Island, across the Powell Basin, furthermore in the Drake Passage and west of Antarctic Peninsula. Short bathymetric surveys were carried out on the continental slope off Kapp Norvegia and Fimbulisen, and in the area of the Weddell Abyssal Plain. The multibeam sonar system Hydrosweep DS-2 was operated mainly in the HDBE softbeam mode with 240 depth values per swath and a receiving coverage of 100°. The refraction correction was achieved utilizing CTD profiles or the system's own cross fan calibration. The quality of data might be reduced during bad weather periods or adverse sea ice conditions. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.

Swath sonar bathymetry during POLARSTERN cruise ANT-XIX/1 (PS61) with links to multibeam raw data files

Multibeam data were measured during R/V Polarstern cruise ANT-XIX/1 on track lines of about 5,200 NM total length in the Atlantic Ocean during the transit from Bremerhaven to Cape Town. The multibeam sonar system Hydrosweep DS-2 was operated using 59 beams and 90° aperture angle. The refraction correction was achieved utilizing the system's own cross fan calibration. The quality of data might be reduced during bad weather periods. The dataset contains raw data that are not processed and thus may contain errors and blunders in depth and position.