Time will tell: Ambiguous non-responses on internet relay chat

The design of Internet Relay Chat (IRC) affords for, and itself produces, non-response situations that are not possible in FTF or telephone interaction. These system-occasioned nonresponses produce almost isomorphic stimuli to participant non-responses. Situations thus arise in which non-responses are interpersonally accountable despite agentive ambiguity. This study explores four intersections of participant-action and system-occasioned non-responses. An extension to Pomerantz's (1984b) 'pursuing a response' problems/solutions is proposed. The impact of IRC's design on its popularity is discussed in contrast to more recent chat systems. Suggestions are made for active and passive presence and non-response accounting features in future chat systems.

Effect of storage time and conditions on the seed coat colour of Australian adzuki beans

Two varieties of adzuki beans (Vigna angularis), Bloodwood and Erimo, were stored at temperatures of 10, 20 or 30degreesC, and relative humidities (RH) 40 or 65%, and samples were analysed at 0, 1.5, 3 and 6 months. Storage at 30degreesC for > 1.5 months caused a significant decrease in the a(star) and b(star) colour values and darkening of the seed coat. Beans stored at 65% RH had lower L-star but higher a(star) and b(star) colour values than those stored at 40% RH. Bloodwood and Erimo samples showed similar trends in colour during storage. The best storage conditions for the preservation of the adzuki colour were 10degreesC and 65% RH. The Australian beans had lower L-star, a(star) and b(star) colour values than Japanese Erimo-shouzu beans and storage increased the difference.

Effect of storage time and conditions on the cotyledon cell wall of the adzuki bean (Vigna angularis)

Two varieties of adzuki grown in Australia, Bloodwood and Erimo, were stored for up to 6 months at three temperatures (10, 20 and 30 degreesC), and two relative humidities (RH; 40 and 65%). The amount of cell wall material increased with time under all storage conditions. This increase was greatest at 30 degreesC and 40% RH. Storage time and conditions did not affect the total pectin levels in the cell wall. Erimo constantly exhibited a higher total pectin level than Bloodwood. The Bloodwood soluble pectin, Ca++ and Mg++ and Erimo Ca++ in the cell wall remained stable during storage, while the Erimo soluble pectin and Mg++ exhibited a slight decrease at 20 and 30 degreesC after 3 months of storage. (C) 2002 Elsevier Science Ltd. All rights reserved.

Mental time travel in animals?

Are humans alone in their ability to reminisce about the past and imagine the future? Recent evidence suggests that food-storing birds (scrub jays) have access to information about what they have stored where and when. This has raised the possibility of mental time travel (MTT) in animals and sparked similar research with other species. Here we caution that such data do not provide convincing evidence for MTT. Examination of characteristics of human MTT (e.g. non-verbal declaration, generativity, developmental prerequisites) points to other avenues as to how a case for animal MTT could be made. In light of the current lack of evidence, however, we maintain that MTT is a uniquely human characteristic.

Effect of time of harvest of budded virus on the selection of baculovirus FP mutants in cell culture

Rapid formation and selection of FP (few polyhedra) mutants occurs during serial passaging of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) in insect cell culture. The production of HaSNPV for use as biopesticides requires the passaging of the virus over a number of passages to produce enough virus inoculum for large-scale fermentation. During serial passaging in cell culture, FP mutants were rapidly selected, resulting in declined productivity and reduced potency of virus. Budded virus (BV) is usually harvested between 72 and 96 h postinfection (hpi) in order to obtain a high titer virus stock. In this study, the effect of tine of harvest (TOH) for BV on the selection rate of HaSNPV FP mutants during serial passaging was investigated. BV were harvested at different times postinfection, and each series was serially passaged for six passages. The productivity and percentage of FP mutants at each passage were determined. It was found that the selection of FP mutants can he reduced by employing an earlier TOH for BV. Serial passaging with BV harvested at 48 hpi showed a slower accumulation of FP mutants compared to that of BV harvested after 48 hpi. Higher cell specific yields were also maintained when BV were harvested at 48 hpi. When BV that were formed between 48 and 96 hpi were harvested and serially passaged, FP mutants quickly dominated the virus population. This suggests that the V formed and released between 48 and 96 hpi are most likely from FP mutant infected cells.

Alunos com paralisia cerebral na escola : linguagem, comunicação alternativa e processos de comunicativos

O estudo assume como problema de investigação analisar as contribuições da Comunicação Alternativa e Ampliada (CAA) aos processos comunicativos de alunos sem fala articulada no contexto da escola, destacando nesses processos o papel potencializador dos interlocutores. Fundamenta-se na abordagem de linguagem e na noção de enunciado discutidas por Bakhtin e nas contribuições de Vigotski sobre a relação entre desenvolvimento e aprendizagem, postulando que a aquisição e o desenvolvimento da linguagem ocorrem no curso das aprendizagens, ao longo da vida. As análises e reflexões empreendidas evidenciam uma discussão acerca da linguagem que se desloca da dimensão orgânica para a dimensão da constituição do sujeito como humano. Sob essa visão, outros conceitos, como os de língua, fala, interação verbal, dialogia, enunciação, aprendizagem e desenvolvimento são problematizados e também considerados como elementos fundantes e presentes nas relações comunicativas entre os sujeitos sem fala articulada e seus interlocutores. Na primeira etapa, o estudo busca conhecer as formas organizativo-pedagógicas de cinco Secretarias Municipais de Educação da Região Metropolitana de Vitória e da Secretaria de Estado da Educação no que diz respeito à identificação dos alunos com Paralisia Cerebral, sem fala articulada, ao acompanhamento técnico-pedagógico e à formação de professores que atuam na Educação Especial. Na segunda etapa, objetiva conhecer a processualidade da organização do trabalho pedagógico instituída nos contextos escolares e investiga os processos comunicativos em/com dois alunos com severos comprometimentos motores e de fala em duas escolas de Ensino Fundamental, localizadas no município de Serra e de Vitória. Nesta etapa, opta pela pesquisa- ação colaborativo-crítica por contribuir, teórica e metodologicamente, para sustentar os fazeres individuais e coletivos nos lócus de investigação. Os resultados revelam que, institucionalmente, ainda não se conhece quem são e quantos são os alunos com Paralisia Cerebral sem fala articulada no contexto de suas reais necessidades. Esse desconhecimento é atribuído pelas gestoras das Secretarias Municipais de Educação investigadas ao considerarem que, via de regra, são tomadas apenas as informações do Educacenso-INEP. As identificações pontuais, quando ocorrem, são decorrentes de estratégias internas adotadas, sendo uma delas o assessoramento pedagógico das equipes às escolas. No que tange ao ensino, à aprendizagem e à avaliação, o estudo constata que são atravessados por concepções equivocadas sobre os sujeitos com Paralisia Cerebral sustentadas, sobretudo, pela baixa expectativa e pelo pouco “esforço” quanto à sua escolarização. Constata também que o uso dos recursos de CAA potencializa os processos comunicativos dos alunos investigados e, movimentados pela linguagem, possibilita-lhes enunciar e fixar posições, opiniões e decisões, assegurando-lhes mais autonomia e fluidez do processo comunicacional. As formas de mediação dos interlocutores assim como as dinâmicas dialógicas por eles utilizadas com os alunos se constituem como elementos importantes nos processos de comunicação e interação. A espera do outro, o apoio e o incentivo à reformulação daquilo que se quer expressar, as modificações e alterações no jogo dialógico são exemplos dessa mediação. Quanto às ações de reorganização do trabalho pedagógico, o estudo registra maior articulação e colaboração entre professores da classe, professora da Educação Especial e estagiária no planejamento das aulas, dos conteúdos, com a inserção no notebook para um dos alunos; o uso das pranchas de comunicação, por ambos os alunos e seus interlocutores, como ação inovadora nos contextos escolares; a realização de atividades pelos alunos, com gradativa autonomia, a partir da disponibilização de recursos de TA/CAA (pasta de conteúdos temáticos, figuras imantadas, quadro metálico, ponteira, plano inclinado, notebook); a proposição de ações intencionais de alfabetização, a partir da reorganização de espaços-tempos no cotidiano da escola. Conclui que as discussões teóricas e práticas das questões relacionadas com a linguagem, com os processos cognitivos e com o uso de recursos de TA/CAA alavancam mudanças na concepção dos profissionais das escolas pesquisadas que, ainda, sob uma visão reducionista quanto às formas de comunicação e de interação verbal, “impõem” limites à escolarização dos alunos com deficiência.

Contradiction between the average age of retirement at the time of death and the average pension time for men and women in public employment in Portugal

The short article attempts to make some very brief reflections on the effects a lack of public policies positively discriminatory in terms of public employment retirement. In particular, the observation of the absurd contradiction between the average age of retirement at the time of death (for men and women) and the average pension time for men and women in public employment in Portugal.

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques

Real-time 3D interactive segmentation of echocardiographic data through user-based deformation of B-spline explicit active surfaces

Image segmentation is an ubiquitous task in medical image analysis, which is required to estimate morphological or functional properties of given anatomical targets. While automatic processing is highly desirable, image segmentation remains to date a supervised process in daily clinical practice. Indeed, challenging data often requires user interaction to capture the required level of anatomical detail. To optimize the analysis of 3D images, the user should be able to efficiently interact with the result of any segmentation algorithm to correct any possible disagreement. Building on a previously developed real-time 3D segmentation algorithm, we propose in the present work an extension towards an interactive application where user information can be used online to steer the segmentation result. This enables a synergistic collaboration between the operator and the underlying segmentation algorithm, thus contributing to higher segmentation accuracy, while keeping total analysis time competitive. To this end, we formalize the user interaction paradigm using a geometrical approach, where the user input is mapped to a non-cartesian space while this information is used to drive the boundary towards the position provided by the user. Additionally, we propose a shape regularization term which improves the interaction with the segmented surface, thereby making the interactive segmentation process less cumbersome. The resulting algorithm offers competitive performance both in terms of segmentation accuracy, as well as in terms of total analysis time. This contributes to a more efficient use of the existing segmentation tools in daily clinical practice. Furthermore, it compares favorably to state-of-the-art interactive segmentation software based on a 3D livewire-based algorithm.

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques.

Preliminary clinical trial in percutaneous nephrolithotomy using a real-time navigation system for percutaneous kidney access

Background: Precise needle puncture of renal calyces is a challenging and essential step for successful percutaneous nephrolithotomy. This work tests and evaluates, through a clinical trial, a real-time navigation system to plan and guide percutaneous kidney puncture. Methods: A novel system, entitled i3DPuncture, was developed to aid surgeons in establishing the desired puncture site and the best virtual puncture trajectory, by gathering and processing data from a tracked needle with optical passive markers. In order to navigate and superimpose the needle to a preoperative volume, the patient, 3D image data and tracker system were previously registered intraoperatively using seven points that were strategically chosen based on rigid bone structures and nearby kidney area. In addition, relevant anatomical structures for surgical navigation were automatically segmented using a multi-organ segmentation algorithm that clusters volumes based on statistical properties and minimum description length criterion. For each cluster, a rendering transfer function enhanced the visualization of different organs and surrounding tissues. Results: One puncture attempt was sufficient to achieve a successful kidney puncture. The puncture took 265 seconds, and 32 seconds were necessary to plan the puncture trajectory. The virtual puncture path was followed correctively until the needle tip reached the desired kidney calyceal. Conclusions: This new solution provided spatial information regarding the needle inside the body and the possibility to visualize surrounding organs. It may offer a promising and innovative solution for percutaneous punctures.

Real-time hand tracking for rehabilitation and character animation

Hand and finger tracking has a major importance in healthcare, for rehabilitation of hand function required due to a neurological disorder, and in virtual environment applications, like characters animation for on-line games or movies. Current solutions consist mostly of motion tracking gloves with embedded resistive bend sensors that most often suffer from signal drift, sensor saturation, sensor displacement and complex calibration procedures. More advanced solutions provide better tracking stability, but at the expense of a higher cost. The proposed solution aims to provide the required precision, stability and feasibility through the combination of eleven inertial measurements units (IMUs). Each unit captures the spatial orientation of the attached body. To fully capture the hand movement, each finger encompasses two units (at the proximal and distal phalanges), plus one unit at the back of the hand. The proposed glove was validated in two distinct steps: a) evaluation of the sensors’ accuracy and stability over time; b) evaluation of the bending trajectories during usual finger flexion tasks based on the intra-class correlation coefficient (ICC). Results revealed that the glove was sensitive mainly to magnetic field distortions and sensors tuning. The inclusion of a hard and soft iron correction algorithm and accelerometer and gyro drift and temperature compensation methods provided increased stability and precision. Finger trajectories evaluation yielded high ICC values with an overall reliability within application’s satisfying limits. The developed low cost system provides a straightforward calibration and usability, qualifying the device for hand and finger tracking in healthcare and animation industries.

Influence of foliar fertilization with manganese on germination, vigor and storage time of RR soybean seeds

ABSTRACTThis study aimed to evaluate the influence of foliar fertilizer doses containing Mn of phenological stages of suggested application in RR soybeans, to recover management damages with glyphosate at postemergence application on seed vigor in post-harvest and post six months storage. The seeds originated from a field experiment conducted , which included two applications of glyphosate, concomitant with foliar fertilizer in growth stages V4 and V6, with 0.00, 113.50 and 227.00 mg ha-1doses of Mn2+. Germination, GSI (Germination Speed Index), electrical conductivity tests and the first count of seeds were conducted. The application of Mn did not affect the physiological quality of RR soy in postharvest. However, in post-storage, higher doses of Mn had a negative effect on tests of abnormal seedlings, GSI and electrical conductivity. The applications of Mn, regardless of the developmental stage, did not interfere in the germination and first count tests, with and without storage. The electrical conductivity test showed a higher correlation with the seed germination test in the post-harvest treatment.