Detection of internal quality in kiwi with a new optical technique (TDRS)

A compact system based on time-resolved diffuse reflectance spectroscopy (TDRS) has been developed to measure internal fruit quality parameters and has been applied to the non-destructive estimation of firmness, sugar content and acidity of kiwifruits. This new optical technique, developed in medical applications and related areas, provides a complete optical characterisation of a diffusive sample as it estimates at the same time and independently the light absorption inside the tissues and the scattering across them. The working principle of the technique is the analysis of the attenuation and broadening of the time-distribution of the remitted light, and the correct interpretation with a proper theoretical model. This main advantage compared to conventional optical techniques (which are only able to register the global attenuation spectrum) added to the compact, portable prototype developed along a three-year work opens the possibilities of this new measurement method in the food industry.

Fast human pose estimation using 3D Zernike descriptors

Markerless video-based human pose estimation algorithms face a high-dimensional problem that is frequently broken down into several lower-dimensional ones by estimating the pose of each limb separately. However, in order to do so they need to reliably locate the torso, for which they typically rely on time coherence and tracking algorithms. Their losing track usually results in catastrophic failure of the process, requiring human intervention and thus precluding their usage in real-time applications. We propose a very fast rough pose estimation scheme based on global shape descriptors built on 3D Zernike moments. Using an articulated model that we configure in many poses, a large database of descriptor/pose pairs can be computed off-line. Thus, the only steps that must be done on-line are the extraction of the descriptors for each input volume and a search against the database to get the most likely poses. While the result of such process is not a fine pose estimation, it can be useful to help more sophisticated algorithms to regain track or make more educated guesses when creating new particles in particle-filter-based tracking schemes. We have achieved a performance of about ten fps on a single computer using a database of about one million entries.

Categorization of Anti-Patterns in Software Project Management

In the last decades, software systems have become an intrinsic element in our daily lives. Software exists in our computers, in our cars, and even in our refrigerators. Today’s world has become heavily dependent on software and yet, we still struggle to deliver quality software products, on-time and within budget. When searching for the causes of such alarming scenario, we find concurrent voices pointing to the role of the project manager. But what is project management and what makes it so challenging? Part of the answer to this question requires a deeper analysis of why software project managers have been largely ineffective. Answering this question might assist current and future software project managers in avoiding, or at least effectively mitigating, problematic scenarios that, if unresolved, will eventually lead to additional failures. This is where anti-patterns come into play and where they can be a useful tool in identifying and addressing software project management failure. Unfortunately, anti-patterns are still a fairly recent concept, and thus, available information is still scarce and loosely organized. This thesis will attempt to help remedy this scenario. The objective of this work is to help organize existing, documented software project management anti-patterns by answering our two research questions: · What are the different anti-patterns in software project management? · How can these anti-patterns be categorized?

SVD Applied to Voltage Sag State Estimation

The method presented in this paper addresses the problem of voltage sag state estimation (VSSE). The problem consists in estimating the voltage sags frequency at non-monitored buses from the number of sags measured at monitored sites. Usually, due to limitations on the number of available voltage sag monitors, this is an underdetermined problem. In this approach, the mathematical formulation presented is based on the fault positions concept and is solved by means of the Singular Value Decomposition (SVD) technique. The proposed estimation method has been validated by using the IEEE 118 test system and the results obtained have been very satisfactory.

Manual del configurador de tiempos. Taxonomía según las acciones modificadoras ejercidas sobre las formas del tiempo en treinta y cuatro obras de arquitectura.

RESUMEN. Toda obra de arquitectura lleva aparejada una concepción del tiempo que es posible sintetizar en una imagen que llamamos "forma del tiempo". Existen obras de arquitectura en las que su forma del tiempo es el producto de una acción modificadora que se ha ejercido sobre él. La presente Tesis Fin de Máster se propone sintetizar las formas del tiempo de una serie de obras escogidas para después organizarlas mediante la elaboración de una taxonomía basada en las acciones modificadoras que definen su forma del tiempo concretándola en un manual que las recoge. ABSTRACT. Every architectural masterpiece carries a conception of time that can be synthesized as an image. This image can be called “shape of time”. The shape of time of some masterpieces is the result of a modifying action that has been done on time. This work has as purpose to synthesize the shapes of time of a few selected masterpieces in order to organize them due to the elaboration of a taxonomy based on modifying actions which define their shape of time and finally, the document that includes them for consult: a manual.

Modelo Híbrido para la Ayuda al Capitán

En esta Tesis se plantea una nueva forma de entender la evacuación apoyándonos en tecnologías existentes y accesibles que nos permitirán ver este proceso como un ente dinámico. Se trata de una metodología que implica no solo el uso de herramientas de análisis que permitan la definición de planes de evacuación en tiempo real, sino que también se apunta hacia la creación de una infraestructura física que permita alimentar con información actualizada al sistema de forma que, según la situación y la evolución de la emergencia, sea posible realizar planes alternativos que se adapten a las nuevas circunstancias. En base a esto, el sistema asimilará toda esa información y aportará soluciones que faciliten la toma de decisiones durante toda la evolución del incidente. Las aportaciones originales de esta Tesis son múltiples y muy variadas, pudiéndolas resumir en los siguientes puntos: 1. Estudio completo del estado del arte: a. Detección y análisis de diferentes proyectos a nivel internacional que de forma parcial tratan algunos aspectos desarrollados en la Tesis. b. Completo estudio a nivel mundial del software desarrollado total o parcialmente para la simulación del comportamiento humano y análisis de procesos de evacuación. Se ha generado una base de datos que cataloga de forma exhaustiva estas aplicaciones, permitiendo realizar un completo análisis y posibilitando la evolución futura de los contenidos de la misma. En la tesis se han analizado casi un centenar de desarrollos, pero el objetivo es seguir completando esta base de datos debido a la gran utilidad y a las importantes posibilidades que ofrece. 2. Desarrollo de un importante capítulo que trata sobre la posibilidad de utilizar entornos virtuales como alternativa intermedia al uso de simuladores y simulacros. En esta sección se divide en dos bloques: a. Ensayos en entornos reales y virtuales. b. Ensayos en entornos virtuales (pruebas realizadas con varios entornos virtuales). 3. Desarrollo de e-Flow net design: paquete de herramientas desarrolladas sobre Rhinoceros para el diseño de la red de evacuación basada en los elementos definidos en la tesis: Nodes, paths, Relations y Areas. 4. Desarrollo de e-Flow Simulator: Conjunto de herramientas que transforman Rhinoceros en un simulador 3D de comportamiento humano. Este simulador, de desarrollo propio, incorpora un novedoso algoritmo de comportamiento a nivel de individuo que incluye aspectos que no se han encontrado en otros simuladores. Esta herramienta permite realizar simulaciones programadas de grupos de individuos cuyo comportamiento se basa en el análisis del entorno y en la presencia de referencias dinámicas. Incluye otras importantes novedades como por ejemplo: herramientas para análisis de la señalización, elementos de señalización dinámica, incorporación sencilla de obstáculos, etc. También se ha creado una herramienta que posibilita la implementación del movimiento del propio escenario simulando la oscilación del mismo, con objeto de reflejar la influencia del movimiento del buque en el desplazamiento de los individuos. 5. En una fase avanzada del desarrollo, se incorporó la posibilidad de generar un vídeo de toda la simulación, momento a partir del cual, se han documentado todas las pruebas (y se continúan documentando) en una base de datos que recoge todas las características de las simulaciones, los problemas detectados, etc. Estas pruebas constituyen, en el momento en que se ha cerrado la redacción de la Tesis, un total de 81 GB de datos. Generación y análisis de rutas en base a la red de evacuación creada con e-Flow Net design y las simulaciones realizadas con e-Flow Net simulator. a. Análisis para la optimización de la configuración de la red en base a los nodos por área existentes. b. Definición de procesos previos al cálculo de rutas posibles. c. Cálculo de rutas: i. Análisis de los diferentes algoritmos que existen en la actualidad para la optimización de rutas. ii. Desarrollo de una nueva familia de algoritmos que he denominado “Minimum Decision Algorithm (MDA)”, siendo los algoritmos que componen esta familia: 1. MDA básico. 2. MDA mínimo. 3. MDA de no interferencia espacial. 4. MDA de expansión. 5. MDA de expansión ordenada para un único origen. 6. MDA de expansión ordenada. iii. Todos estos algoritmos se han implementado en la aplicación e-Flow creada en la Tesis para el análisis de rutas y que constituye el núcleo del Sistema de Ayuda al Capitán. d. Determinación de las alternativas para el plan de evacuación. Tras la definición de las rutas posibles, se describen diferentes procesos existentes de análisis por ponderación en base a criterios, para pasar finalmente a definir el método de desarrollo propio propuesto en esta Tesis y cuyo objetivo es responder en base a la población de rutas posibles obtenidas mediante los algoritmos MDA, qué combinación de rutas constituyen el Plan o Planes más adecuados para cada situación. La metodología creada para la selección de combinaciones de rutas que determinan un Plan completo, se basa en cuatro criterios básicos que tras su aplicación ofrecen las mejores alternativas. En esta fase también se incluye un complejo análisis de evolución temporal que incorpora novedosas definiciones y formulaciones. e. Derivado de la definición de la metodología creada en esta Tesis para la realización de los análisis de evolución temporal, se ha podido definir un nuevo teorema matemático que se ha bautizado como “Familia de cuadriláteros de área constante”. 7. Especificación de la infraestructura física del Sistema de Ayuda al Capitán: parte fundamental de sistema es la infraestructura física sobre la que se sustentaría. Esta infraestructura estaría compuesta por sensores, actuadores, aplicaciones para dispositivos móviles, etc. En este capítulo se analizan los diferentes elementos que la constituirían y las tecnologías implicadas. 8. Especificación de la infraestructura de servicios. 9. Creación del Blog Virtual Environments (http://epcinnova-virtualenvironments.blogspot.com.es/) en el que se han publicado todas las pruebas realizadas en el capítulo que analiza los entornos virtuales como alternativa a los simuladores y a los ensayos en laboratorio o los simulacros, incluyendo en muchos casos la posibilidad de que el visitante del blog pueda realizar la simulación en el entorno virtual. Este blog también incluye otras secciones que se han trabajado durante la Tesis: • Recopilación de diferentes entornos virtuales existentes. • Diagrama que recopila información sobre accidentes tanto en el ámbito marítimo como en el terrestre (en desarrollo). • Esquema propuesto para el acopio de información obtenida a partir de un simulacro. 10. Esta Tesis es la base para el proyecto e-Flow (nombre de una de las aplicaciones que desarrolladas en esta obra), un proyecto en el que el autor de esta Tesis ha trabajado como Project Manager. En el proyecto participa un consorcio de empresas y la UPM, y tiene como objetivo trasladar a la realidad gran parte de los planteamientos e ideas presentadas en esta Tesis. Este proyecto incluye el desarrollo de la infraestructura física y de servicios que permitirán, entre otras cosas, implementar en infraestructuras complejas una plataforma que posibilita la evacuación dinámica y un control ubicuo de los sistemas de monitorización y actuación implementados. En estos momentos se está finalizando el proyecto, cuyo objetivo final es la implementación de un piloto en un Hospital. También destacamos los siguientes avances a nivel de difusión científico-tecnológico: • Ponencia en el “52 congreso de la Ingeniería Naval en España” presentando un artículo “e-Flow- Sistema integral inteligente de soporte a la evacuación”. En este artículo se trata tanto el proyecto e-Flow del que soy Project Manager, como esta Tesis Doctoral, al ser temas estrechamente vinculados. En 2014 se publicó en dos números de la Revista Ingeniería Naval el artículo presentado a estas jornadas. • Co-autor en el artículo “E-Flow: A communication system for user notification in dynamic evacuation scenarios” presentado en el 7th International Conference on Ubicuous Computing & Ambient Intelligence (UCAMI) celebrado en Costa Rica. Por último, una de las aportaciones más interesantes, es la definición de un gran número de líneas de investigación futuras en base a todos los avances realizados en esta Tesis. ABSTRACT With this Thesis a new approach for understanding evacuation process is considered, taking advantage of the existing and open technologies that will allow this process to be interpreted as a dynamic entity. The methodology involves not only tools that allows on.-time evacuation plans, but also creates a physical insfrastructure that makes possible to feed the system with information on real time so, considering in each moment the real situation as well as the specific emergency development it will be feasible to generate alternative plans that responds to the current emergency situation. In this respect, the system will store all this information and will feedback with solutions that will help the decision making along the evacuation process. The innovative and singular contributions of this Thesis are numerous and rich, summarised as follows: 1.- Complete state-of-art study: a. Detection and analysis of different projects on an international level that, although partially, deal with some aspects developed in this Thesis. b. Thorough study at a international level of the developed software - total or partially done - for the simulation of the human behaviour and evacuation processes analysis. A database has been generated that classifies in detail these applications allowing to perform a full analysis and leading to future evolution of its contents. Within the Thesis work, almost a hundred of developments have been analysed but the purpose is to keep up updating this database due to the broad applications and possibilities that it involves. 2. Development of an important chapter that studies the possibility of using virtual scenarios as mid-term alternative for the use of simulations. This section is divided in two blocks: a. Trials in virtual and real scenarios b. Trials in virutal scenarios (trials performed with several ones). 3. E-Flow net design development: Set of tools developed under Rhinoceros for the evacuation net design based on the elements defined in the Thesis: Nodes, Paths, Relations, Areas 4. E-Flow simulator development: Set of tools that uses Rhinoceros as a 3D simulator of human behaviour. This simulator, of my own design, includes a new and original algorithm of human behaviour that involves aspects that are not found in other simulators. This tool allows to perform groups programmed simulations which behaviour is based on their enviroment analysis and presence of dynamic references. It includes other important innovations as for example: tools for signals analysis, dynamic signal elements, easy obstacle adding etc... More over, a tool that allows the own scenario movement implementation has been created by simulating the own oscillation movement, with the purpose of playing the vessel movement's influences in the individuals' displacements. 5. In an advanced stage of the development, the possibility of generating a video recording of all the simulation was also integrated, then from that moment all tests have been filed (and keep on doing so) in a database that collects all simulation characteristics, failures detected, etc. These stored tests amounts to a total of 81 GB at the moment of finishing the Thesis work. Generation and analysis of paths regarding the evacuation net created with E-Flow design and the simulations performed with E-Flow net Simulator. a. Analysis for the optimisation of the network configuration based in the existing nodes per area. b. Definition of the processes previous to the calculation of the feasible paths c. Paths calculation: i. Analysis of the different algorithms on existance nowadays for the routes optimisation. ii. Development of a new family of algorithms that I have called “Minimum Decision Algorithm (MDA)”, being composed of: 1. MDA basic 2. MDA minimum 3. MDA of not spacial interference 4. MDA of expansion (es de extenderse) o enlargement ( es de crecimiento) 5. MDA of organised expansion for a single origin (of organised enlargement for a single origin) 6. MDA of organised expansion (of organised enlargement) iii. All these algorithms have been implemented in the E-Flow application created in the Thesis dfor the routes analysis and it is the core of the Captain's support system. d. Determination of the alternatives for the evacuation plan. After defining all possible paths, different processes of analysis existing for weighing-based criteria are described, thus to end defining the own development method proposed in this Thesis and that aims to respond in an agreggation of possible routes basis obtained by means of the MDA algorithms what is the routes' combination more suitable for the Plan or Plans in every situation. The methodology created fot the selection of the combinations of routes that determine a complete Plan is baesd in four basic criteria that after applying, offer the best alternatives. In this stage a complex analysis of the progress along time is also included, that adds original and innovative defintions and formulations. e. Originated from the methodology created in this Thesis for the perfoming of the analysy of the progress along time, a new mathematic theorem has been defined, that has been called as "Family of quadrilateral of constant area". 7. Specification of the physiscal infrastructure of the Captain's help system: essential part is this physical infrastructure that will support it. This system will be made of sensors, actuators, apps for mobile devices etc... Within this chapter the different elements and technologies that make up this infrastructure will be studied. 8. Specification for the services infrastructure. 9. Start up of the Blog. " Virtual Environments (http://epcinnova-virtualenvironments.blogspot.com.es/)" in which all tests performed have been published in terms of analysis of the virtual enviroments as alternative to the simulators as well as to the laboratory experiments or simulations, including in most of the cases the possibility that the visitor can perform the simulation within the virtual enviroment. This blog also includes other sections that have been worked along and within this Thesis: - Collection of different virtual scenarios existent. - Schema that gathers information concerning accidents for maritime and terrestrial areas (under development) - Schema proposed for the collecting of information obtained from a simulation. 10. This Thesis is the basis of the E-Flow project (name of one of the applications developed in this work), a project in which the Thesis' author has worked in as Project Manager. In the project takes part a consortium of firms as well as the UPM and the aim is to bring to real life most part of the approaches and ideas contained in this Thesis. This project includes the development of the physical infrastructure as well as the services that will allow, among others, implement in complex infrastrucutres a platform that will make possible a dynamic evacuation and a continuous control of the monitoring and acting systems implemented. At the moment the project is getting to an end which goal is the implementation of a pilot project in a Hospital. We also would like to highlight the following advances concerning the scientific-technology divulgation: • Talk in the " 52th Congress of the Naval Engineering in Spain" with the article "E-Flow . Intelligent system integrated for supporting evacuation". This paper is about project E-Flow which I am Project Manager of, as well as this Thesis for the Doctorate, being both closely related. Two papers published In 2014 in the Naval Engineering Magazine. • Co-author in the article “E-Flow: A communication system for user notification in dynamic evacuation scenarios” [17] introduced in the 7th International Conference on Ubicuous Computing & Ambient Intelligence (UCAMI) held in Costa Rica. Last, but not least, one of the more interesting contributions is the defintion of several lines of research in the future, based on the advances made in this Thesis.

Islanding detection in Microgrids using Harmonic Signature

In recent years, there has been a growing interest in incorporating microgrids in electrical power networks. This is due to various advantages they present, particularly the possibility of working in either autonomous mode or grid connected, which makes them highly versatile structures for incorporating intermittent generation and energy storage. However, they pose safety issues in being able to support a local island in case of utility disconnection. Thus, in the event of an unintentional island situation, they should be able to detect the loss of mains and disconnect for self-protection and safety reasons. Most of the anti-islanding schemes are implemented within control of single generation devices, such as dc-ac inverters used with solar electric systems being incompatible with the concept of microgrids due to the variety and multiplicity of sources within the microgrid. In this paper, a passive islanding detection method based on the change of the 5th harmonic voltage magnitude at the point of common coupling between grid-connected and islanded modes of operation is presented. Hardware test results from the application of this approach to a laboratory scale microgrid are shown. The experimental results demonstrate the validity of the proposed method, in meeting the requirements of IEEE 1547 standards.

Interaction between interconnected and isolated grounding systems: a case study of transferred potentials

The effect caused by ground fault current in a complex system of interacting electrodes is theoretically studied. The calculation applies to a specific case in which a set of interconnected electrodes, which are part of a grounding facility network, are activated by a ground fault current. Transferred potentials to adjacent passive electrodes are calculated and the most relevant parameters of the electrode system are evaluated. Finally, the convenience of connecting the grounding electrodes is discussed.

Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

Utilizing the Internet of Things to promote energy awareness and efficiency at discrete production processes: Practices and methodology

El actual contexto de fabricación, con incrementos en los precios de la energía, una creciente preocupación medioambiental y cambios continuos en los comportamientos de los consumidores, fomenta que los responsables prioricen la fabricación respetuosa con el medioambiente. El paradigma del Internet de las Cosas (IoT) promete incrementar la visibilidad y la atención prestada al consumo de energía gracias tanto a sensores como a medidores inteligentes en los niveles de máquina y de línea de producción. En consecuencia es posible y sencillo obtener datos de consumo de energía en tiempo real proveniente de los procesos de fabricación, pero además es posible analizarlos para incrementar su importancia en la toma de decisiones. Esta tesis pretende investigar cómo utilizar la adopción del Internet de las Cosas en el nivel de planta de producción, en procesos discretos, para incrementar la capacidad de uso de la información proveniente tanto de la energía como de la eficiencia energética. Para alcanzar este objetivo general, la investigación se ha dividido en cuatro sub-objetivos y la misma se ha desarrollado a lo largo de cuatro fases principales (en adelante estudios). El primer estudio de esta tesis, que se apoya sobre una revisión bibliográfica comprehensiva y sobre las aportaciones de expertos, define prácticas de gestión de la producción que son energéticamente eficientes y que se apoyan de un modo preeminente en la tecnología IoT. Este primer estudio también detalla los beneficios esperables al adoptar estas prácticas de gestión. Además, propugna un marco de referencia para permitir la integración de los datos que sobre el consumo energético se obtienen en el marco de las plataformas y sistemas de información de la compañía. Esto se lleva a cabo con el objetivo último de remarcar cómo estos datos pueden ser utilizados para apalancar decisiones en los niveles de procesos tanto tácticos como operativos. Segundo, considerando los precios de la energía como variables en el mercado intradiario y la disponibilidad de información detallada sobre el estado de las máquinas desde el punto de vista de consumo energético, el segundo estudio propone un modelo matemático para minimizar los costes del consumo de energía para la programación de asignaciones de una única máquina que deba atender a varios procesos de producción. Este modelo permite la toma de decisiones en el nivel de máquina para determinar los instantes de lanzamiento de cada trabajo de producción, los tiempos muertos, cuándo la máquina debe ser puesta en un estado de apagada, el momento adecuado para rearrancar, y para pararse, etc. Así, este modelo habilita al responsable de producción de implementar el esquema de producción menos costoso para cada turno de producción. En el tercer estudio esta investigación proporciona una metodología para ayudar a los responsables a implementar IoT en el nivel de los sistemas productivos. Se incluye un análisis del estado en que se encuentran los sistemas de gestión de energía y de producción en la factoría, así como también se proporcionan recomendaciones sobre procedimientos para implementar IoT para capturar y analizar los datos de consumo. Esta metodología ha sido validada en un estudio piloto, donde algunos indicadores clave de rendimiento (KPIs) han sido empleados para determinar la eficiencia energética. En el cuarto estudio el objetivo es introducir una vía para obtener visibilidad y relevancia a diferentes niveles de la energía consumida en los procesos de producción. El método propuesto permite que las factorías con procesos de producción discretos puedan determinar la energía consumida, el CO2 emitido o el coste de la energía consumida ya sea en cualquiera de los niveles: operación, producto o la orden de fabricación completa, siempre considerando las diferentes fuentes de energía y las fluctuaciones en los precios de la misma. Los resultados muestran que decisiones y prácticas de gestión para conseguir sistemas de producción energéticamente eficientes son posibles en virtud del Internet de las Cosas. También, con los resultados de esta tesis los responsables de la gestión energética en las compañías pueden plantearse una aproximación a la utilización del IoT desde un punto de vista de la obtención de beneficios, abordando aquellas prácticas de gestión energética que se encuentran más próximas al nivel de madurez de la factoría, a sus objetivos, al tipo de producción que desarrolla, etc. Así mismo esta tesis muestra que es posible obtener reducciones significativas de coste simplemente evitando los períodos de pico diario en el precio de la misma. Además la tesis permite identificar cómo el nivel de monitorización del consumo energético (es decir al nivel de máquina), el intervalo temporal, y el nivel del análisis de los datos son factores determinantes a la hora de localizar oportunidades para mejorar la eficiencia energética. Adicionalmente, la integración de datos de consumo energético en tiempo real con datos de producción (cuando existen altos niveles de estandarización en los procesos productivos y sus datos) es esencial para permitir que las factorías detallen la energía efectivamente consumida, su coste y CO2 emitido durante la producción de un producto o componente. Esto permite obtener una valiosa información a los gestores en el nivel decisor de la factoría así como a los consumidores y reguladores. ABSTRACT In today‘s manufacturing scenario, rising energy prices, increasing ecological awareness, and changing consumer behaviors are driving decision makers to prioritize green manufacturing. The Internet of Things (IoT) paradigm promises to increase the visibility and awareness of energy consumption, thanks to smart sensors and smart meters at the machine and production line level. Consequently, real-time energy consumption data from the manufacturing processes can be easily collected and then analyzed, to improve energy-aware decision-making. This thesis aims to investigate how to utilize the adoption of the Internet of Things at shop floor level to increase energy–awareness and the energy efficiency of discrete production processes. In order to achieve the main research goal, the research is divided into four sub-objectives, and is accomplished during four main phases (i.e., studies). In the first study, by relying on a comprehensive literature review and on experts‘ insights, the thesis defines energy-efficient production management practices that are enhanced and enabled by IoT technology. The first study also explains the benefits that can be obtained by adopting such management practices. Furthermore, it presents a framework to support the integration of gathered energy data into a company‘s information technology tools and platforms, which is done with the ultimate goal of highlighting how operational and tactical decision-making processes could leverage such data in order to improve energy efficiency. Considering the variable energy prices in one day, along with the availability of detailed machine status energy data, the second study proposes a mathematical model to minimize energy consumption costs for single machine production scheduling during production processes. This model works by making decisions at the machine level to determine the launch times for job processing, idle time, when the machine must be shut down, ―turning on‖ time, and ―turning off‖ time. This model enables the operations manager to implement the least expensive production schedule during a production shift. In the third study, the research provides a methodology to help managers implement the IoT at the production system level; it includes an analysis of current energy management and production systems at the factory, and recommends procedures for implementing the IoT to collect and analyze energy data. The methodology has been validated by a pilot study, where energy KPIs have been used to evaluate energy efficiency. In the fourth study, the goal is to introduce a way to achieve multi-level awareness of the energy consumed during production processes. The proposed method enables discrete factories to specify energy consumption, CO2 emissions, and the cost of the energy consumed at operation, production and order levels, while considering energy sources and fluctuations in energy prices. The results show that energy-efficient production management practices and decisions can be enhanced and enabled by the IoT. With the outcomes of the thesis, energy managers can approach the IoT adoption in a benefit-driven way, by addressing energy management practices that are close to the maturity level of the factory, target, production type, etc. The thesis also shows that significant reductions in energy costs can be achieved by avoiding high-energy price periods in a day. Furthermore, the thesis determines the level of monitoring energy consumption (i.e., machine level), the interval time, and the level of energy data analysis, which are all important factors involved in finding opportunities to improve energy efficiency. Eventually, integrating real-time energy data with production data (when there are high levels of production process standardization data) is essential to enable factories to specify the amount and cost of energy consumed, as well as the CO2 emitted while producing a product, providing valuable information to decision makers at the factory level as well as to consumers and regulators.

Dashboard configurable para la gestión y administración de una instancia de OpenStack

En este documento está descrito detalladamente el trabajo realizado para completar todos objetivos marcados para este Trabajo de Fin de Grado, que tiene como meta final el desarrollo de un dashboard configurable de gestión y administración para instancias de OpenStack. OpenStack es una plataforma libre y de código abierto utilizada como solución de Infraestructura como Servicio (Infrastructure as a Service, IaaS) en clouds tanto públicos, que ofrecen sus servicios cobrando el tiempo de uso o los recursos utilizados, como privados para su utilización exclusiva en el entorno de una empresa. El proyecto OpenStack se inició como una colaboración entre la NASA y RackSpace, y a día de hoy es mantenido por las empresas más potentes del sector tecnológico a través de la Fundación OpenStack. La plataforma OpenStack permite el acceso a sus servicios a través de una Interfaz de Linea de Comandos (Command Line Interface, CLI), una API RESTful y una interfaz web en forma de dashboard. Esta última es ofrecida a través del servicio Horizon. Este servicio provee de una interfaz gráfica para acceder, gestionar y automatizar servicios basados en cloud. El dashboard de Horizon presente algunos problemas como que: solo admite opciones de configuración mediante código Python, lo que hace que el usuario no tenga ninguna capacidad de configuración y que el administrador esté obligado a interactuar directamente con el código. no tiene soporte para múltiples regiones que permitan que un usuario pueda distribuir sus recursos por distintos centros de datos en diversas localizaciones como más le convenga. El presente Trabajo de Fin de Grado, que es la fase inicial del proyecto FI-Dash, pretende solucionar estos problemas mediante el desarrollo de un catálogo de widget de la plataformaWireCloud que permitirán al usuario tener todas las funcionalidades ofrecidas por Horizon a la vez que le ofrecen capacidades de configuración y añaden funcionalidades no presentes en Horizon como el soporte de múltiples regiones. Como paso previo al desarrollo del catálogo de widgets se ha llevado a cabo un estudio de las tecnologías y servicios ofrecidos por OpenStack, así como de las herramientas que pudieran ser necesarias para la realización del trabajo. El proceso de desarrollo ha sido dividido en distintas fases de acuerdo con los distintos componentes que forman parte del dashboard cada uno con una funcion de gestion sobre un tipo de recurso distinto. Las otras fases del desarrollo han sido la integración completa del dashboard en la plataforma WireCloud y el diseño de una interfaz gráfica usable y atractiva.---ABSTRACT---Throughout this document it is described the work performed in order to achieve all of the objectives set for this Final Project, which has as its main goal the development of a configurable dashboard for managing and administrating OpenStack instances. OpenStack is a free and open source platform used as Infrastructure as a Service (IaaS) for both public clouds, which offer their services through payments on time or resources used, and private clouds for use only in the company’s environment. The OpenStack project started as a collaboration between NASA and Rackspace, and nowadays is maintained by the most powerful companies in the technology sector through the OpenStack Foundation. The OpenStack project provides access to its services through a Command Line Interface (CLI), a RESTful API and a web interface as dashboard. The latter is offered through a service called Horizon. This service provides a graphical interface to access, manage and automate cloud-based services. Horizon’s dashboard presents some problems such as: Only supports configuration options using Python code, which grants the user no configuration capabilities and forces the administrator to interact directly. No support for multiple regions that allow a user to allocate his resources by different data centers in different locations at his convenience. This Final Project, which is the initial stage of the FI-Dash project, aims to solve these problems by developing a catalog of widgets for the WireCloud platform that will allow the user to have all the features offered by Horizon while offering configuration capabilities and additional features not present in Horizon such as support for multiple regions. As a prelude to the development of the widget catalog, a study of technologies and services offered by OpenStack as well as tools that may be necessary to carry out the work has been conducted. The development process has been split in phases matching the different components that are part of the dashboard, having each one of them a function of management of one kind of resource. The other development phases have been the achieving of full integration with WireCloud and the design of a graphical interface that is both usable and atractive.

Nonlinear seismic behaviour of concrete arch bridges

Arch bridge structural solution has been known for centuries, in fact the simple nature of arch that require low tension and shear strength was an advantage as the simple materials like stone and brick were the only option back in ancient centuries. By the pass of time especially after industrial revolution, the new materials were adopted in construction of arch bridges to reach longer spans. Nowadays one long span arch bridge is made of steel, concrete or combination of these two as "CFST", as the result of using these high strength materials, very long spans can be achieved. The current record for longest arch belongs to Chaotianmen bridge over Yangtze river in China with 552 meters span made of steel and the longest reinforced concrete type is Wanxian bridge which also cross the Yangtze river through a 420 meters span. Today the designer is no longer limited by span length as long as arch bridge is the most applicable solution among other approaches, i.e. cable stayed and suspended bridges are more reasonable if very long span is desired. Like any super structure, the economical and architectural aspects in construction of a bridge is extremely important, in other words, as a narrower bridge has better appearance, it also require smaller volume of material which make the design more economical. Design of such bridge, beside the high strength materials, requires precise structural analysis approaches capable of integrating the combination of material behaviour and complex geometry of structure and various types of loads which may be applied to bridge during its service life. Depend on the design strategy, analysis may only evaluates the linear elastic behaviour of structure or consider the nonlinear properties as well. Although most of structures in the past were designed to act in their elastic range, the rapid increase in computational capacity allow us to consider different sources of nonlinearities in order to achieve a more realistic evaluations where the dynamic behaviour of bridge is important especially in seismic zones where large movements may occur or structure experience P - _ effect during the earthquake. The above mentioned type of analysis is computationally expensive and very time consuming. In recent years, several methods were proposed in order to resolve this problem. Discussion of recent developments on these methods and their application on long span concrete arch bridges is the main goal of this research. Accordingly available long span concrete arch bridges have been studied to gather the critical information about their geometrical aspects and properties of their materials. Based on concluded information, several concrete arch bridges were designed for further studies. The main span of these bridges range from 100 to 400 meters. The Structural analysis methods implemented in in this study are as following: Elastic Analysis: Direct Response History Analysis (DRHA): This method solves the direct equation of motion over time history of applied acceleration or imposed load in linear elastic range. Modal Response History Analysis (MRHA): Similar to DRHA, this method is also based on time history, but the equation of motion is simplified to single degree of freedom system and calculates the response of each mode independently. Performing this analysis require less time than DRHA. Modal Response Spectrum Analysis (MRSA): As it is obvious from its name, this method calculates the peak response of structure for each mode and combine them using modal combination rules based on the introduced spectra of ground motion. This method is expected to be fastest among Elastic analysis. Inelastic Analysis: Nonlinear Response History Analysis (NL-RHA): The most accurate strategy to address significant nonlinearities in structural dynamics is undoubtedly the nonlinear response history analysis which is similar to DRHA but extended to inelastic range by updating the stiffness matrix for every iteration. This onerous task, clearly increase the computational cost especially for unsymmetrical buildings that requires to be analyzed in a full 3D model for taking the torsional effects in to consideration. Modal Pushover Analysis (MPA): The Modal Pushover Analysis is basically the MRHA but extended to inelastic stage. After all, the MRHA cannot solve the system of dynamics because the resisting force fs(u; u_ ) is unknown for inelastic stage. The solution of MPA for this obstacle is using the previously recorded fs to evaluate system of dynamics. Extended Modal Pushover Analysis (EMPA): Expanded Modal pushover is a one of very recent proposed methods which evaluates response of structure under multi-directional excitation using the modal pushover analysis strategy. In one specific mode,the original pushover neglect the contribution of the directions different than characteristic one, this is reasonable in regular symmetric building but a structure with complex shape like long span arch bridges may go through strong modal coupling. This method intend to consider modal coupling while it take same time of computation as MPA. Coupled Nonlinear Static Pushover Analysis (CNSP): The EMPA includes the contribution of non-characteristic direction to the formal MPA procedure. However the static pushovers in EMPA are performed individually for every mode, accordingly the resulted values from different modes can be combined but this is only valid in elastic phase; as soon as any element in structure starts yielding the neutral axis of that section is no longer fixed for both response during the earthquake, meaning the longitudinal deflection unavoidably affect the transverse one or vice versa. To overcome this drawback, the CNSP suggests executing pushover analysis for governing modes of each direction at the same time. This strategy is estimated to be more accurate than MPA and EMPA, moreover the calculation time is reduced because only one pushover analysis is required. Regardless of the strategy, the accuracy of structural analysis is highly dependent on modelling and numerical integration approaches used in evaluation of each method. Therefore the widely used Finite Element Method is implemented in process of all analysis performed in this research. In order to address the study, chapter 2, starts with gathered information about constructed long span arch bridges, this chapter continuous with geometrical and material definition of new models. Chapter 3 provides the detailed information about structural analysis strategies; furthermore the step by step description of procedure of all methods is available in Appendix A. The document ends with the description of results and conclusion of chapter 4.

Estudio y desarrollo del plan de negocio de una empresa: Sistema Web que gestiona e informa sobre las cuentas digitales que el cliente ingresa

El presente documento tiene como objetivo general desarrollar un plan de negocio para analizar la viabilidad de la creación de una nueva empresa, “MyTested S.L.”. Pretende ofrecer una herramienta para que las personas puedan comunicar a sus familiares el acceso a sus cuentas digitales una vez fallecidos. En cuanto a cómo surge la idea, fue a través de una noticia que trataba sobre el derecho al olvido en las redes sociales y en internet. Investigando un poco y prestando atención a los movimientos de las grandes empresas de internet, mi compañero/socio y yo, nos dimos cuenta de que ofrecer este servicio podría valer como negocio, ya que no existe mucha competencia en el mercado. Gracias a eso, nos planteamos en más de una ocasión la posibilidad de montar nuestro propio negocio, de forma que pudiéramos utilizar los conocimientos adquiridos en la universidad como base para crear la herramienta web. Escogimos empezar el proyecto utilizándolo como materia para el trabajo de fin de grado porque nos aporta dos valores muy importantes, ayuda de la comunidad de profesores existentes en la UPM, siendo una persona de gran aporte nuestro tutor Oscar Corcho y también, porque como estamos dedicando todo el tiempo a este proyecto, tener una fecha límite para presentar tanto la parte de modelo de negocio como la parte de desarrollo en una fecha concreta, nos ayuda a planificar y mantener una presión constante sobre el proyecto y así forzar a no abandonarlo ni prolongarlo. Con ello, nos encontramos con dos grupos de dificultades, la escasa formación a nivel empresarial y creación de modelos de negocio y en el ámbito del desarrollo al desconocimiento de tecnologías y APIs de las redes sociales. Al tratarse de una herramienta Web, parte de unos costes muy bajos como el alojamiento del servidor o la contratación temporal de comerciales para publicitar la herramienta entre funerarias y hospitales. Estos factores positivos benefician tanto la realización del proyecto como su avance. Como ya se puede intuir de la lectura del párrafo anterior, el servicio que ofrece la herramienta “MyTested S.L.” está relacionado con el segmento testamental de una persona fallecida, podríamos definirlo como testamento digital. Actualmente, vivimos en un mundo que se centra cada vez más en la parte digital y es por ello, que en un futuro cercano, todas las cuentas que creamos en internet tendrán que ser cerradas o bloqueadas cuando caen en el desuso por el fallecimiento del propietario, es en ese hueco donde podemos situarnos, ofreciendo una herramienta para poder trasladar la información necesaria a las personas elegidas por el cliente para que puedan cerrar o bloquear sus cuentas digitales. Consideramos que existe una interesante oportunidad debido a la escasez de oferta de este tipo de servicios en España y a nivel mundial. En Abril de 2015 hay inscritos en el registro Nacional de últimas voluntades 185.6651 personas por lo que encontramos que un 0,397%1 de las personas en España ha registrado su testamento. El gasto medio al hacer un testamento vital ante notario de tus bienes tiene un coste de 40 a 80 euros2 , este es el principal motivo por el que la mayoría de españoles no realiza su testamento antes de morir. Con este dato obtenemos dos lecciones, lo que la herramienta ofrece no es el documento notarial de los bienes del cliente, sino la sistema, puedan bloquear o cerrar sus cuentas. La segunda lección que obtenemos es que el precio tiene que ser muy reducido para poder llegar a un gran número de personas, añadiendo también el criterio de que el cliente podrá actualizar su información, ya que la información digital es muy fácil de cambiar y frecuente. Como se podrá leer en al apartado dedicado a nuestra visión, misión y valores, aunque estamos convencidos que se puede extraer de la lectura de cualquier parte de este documento, todos nuestros objetivos los queremos conseguir no sólo buscando un enfoque empresarial a nuestro día a día, sino convirtiendo nuestra responsabilidad social sincera, en uno de los retos que más nos ilusionan, fomentando para ello, aspectos como el desarrollo web, estudios de mercado, conocimiento de las necesidades de la población, nuevas tecnologías y negocio. En general, los objetivos que se pretenden cumplir con este estudio son: - Conocer los pasos para crear una empresa - Desarrollar un documento de plan de negocio que contenga lo siguiente: - Análisis de mercado - Definición de productos y/o servicios - Plan de publicidad y expansión (marketing) - Plan financiero - Capacidad para definir los requisitos de una aplicación Web. - Capacidad de elegir la tecnología idónea y actual de un sistema Web. - Conocer el funcionamiento de una empresa y cómo comunicarse con las herramientas gubernamentales. - Comprobar si las posibilidades que nos ofrece el entorno son las adecuadas para nuestras actividades. - Estudio, análisis de la competencia - Definir los diferentes perfiles de cliente para nuestro negocio. - Analizar la viabilidad de nuestro modelo de negocio. Para ello, comenzamos realizando una definición de las características generales del proyecto, detallando cuáles son las motivaciones que han hecho a los emprendedores embarcarse en el mismo, qué servicios ofreceremos a nuestros clientes, el porqué de la elección del sector, así́ como nuestra misión, visión y valores.---ABSTRACT---The goal and aim of the present document is to develop a business plan in order to analyze the viability of build a new enterprise, that we will name MyTested S.L., it wants offer a tool for sharing and to facilitate to the relatives of a dead person the access to the digital accounts. Talking about how come up the idea, it was once a have read a news over the “right of forgotten” throughout social nets and inside internet, researching a little and paying attention to the different movements of the biggest internet companies, my peer ( and partner) and I were aware that to offer this service might be a good business, because does not exist many competitors on this kind of market service, mainly thanks of that, we have planned on several times the possibility to build our owner company, in the way to use the capabilities that we achieved in the University as based to develop and make a web tool. We choose begin this project as subject of our Final Project Degree after analyze the positive and negative point of views: The positive was because it has two main values, firstly the support of the current teachers UPM community, specially our fellow Oscar Corcho and also because we can´t dedicate all our time to this project, so to have a deadline to present either the business model as the develop on time, help us to plan and remain a constant pressure over the project and neither drop out it or extend it more that the necessary. As a web tool, neither the hosting of maintenance or for sort out a net of temporary commercials for visiting hospitals or undertaker´s or insurances, the cost don´t are expensive In the negative side, however, we found twice some main difficulties, the few training as entrepreneur level and how to build a business model and on the other hand the lack of awareness of the technologies and apps of the social net software as well. As summary, these positives facts enhance to work project out and also to develop it. As we could understand reading on the latest paragraph, the service that will do MyTested tool is relation with the testament issue of a dead person, we might call as a digital testament. Currently we are living in world which is focus further on the digital life, for that in a near future every internet accounts should be closed or locked whenever aren´t used by the dead of the owner, this is a market niche (never better said) where we can lead, offering a tool that might transfer the necessary information to the chosen persons by the client in order to allow either close or lock his digital accounts. We are considering that there are interesting opportunities due to the few offers of that kind of service in Spain and at global level. In April 2015 there were 185.6651 persons registered in the Official National last will and testament, this figure mean that the 0,397%1 of the Spaniards citizens have registered their testaments. The average cost of doing the testament of your assets with a Notary is since 40 up to 80€2, this is one of the principal motives because the majority of the Spaniards don´t do it before dead. With these data we might get two lessons, we are not talking about an official notary testament at all, it is only for close or lock the digital accounts by the chosen person by the dead client, and the latest lesson, but not least, the price of our service must be very cheaper in order to achieve touch an important amount of people, knowing also that he client will be able update the information filled, considering that this kind of information is very easy to change and update frequently. As we can read on the stage dedicated to our Vision, Mission and Values, although we are persuaded that can be read in everywhere of this document as well, our aim doesn´t be an business focus on day to day, is also to become our honest social responsibility in this challenge, that is our mainly eagerness, enhancing some aspects as the web development, market research and the knowledge of the population needs, new technologies and new market opportunities. In general the goals that we would like get within this project are: - Achieve the knowledge needs for be an entrepreneurial, and find out the steps for star a business - Achieve market research skills - Products and services definitions - Advertising plan and growth (marketing plan) - Financial plan knowledge - Capability of a web design requirements - Capability for choose the best and actual technology for web design - Knowledge over how work out inside a company and how communicate with official tools. - Check whether the possibilities of the environment are the adequate for our activities. - Research and competitiveness analysis - Define the different profiles of the target for our business. - Analyze the viability of the business model For all that, we began with a definition of the general features of the project, detailing which are the motivations those done to the entrepreneurial get on board, which kind of service we offered to the client, also why the selection of the market sector and our mission, vision and value as well.

La casa crecedera. El crecimiento programado de la vivienda con innovación europea y economía de medios latinoamericana

El concepto de casa crecedera, tal y como lo conocemos en la actualidad, se acuñó por primera vez en 1932 en el concurso Das Wachsende Haus organizado por Martin Wagner y Hans Poelzig dentro del marco de la Exposición Internacional Sonne, Luft und Haus für alle, promovida por la Oficina de Turismo de la ciudad de Berlín. En dicho concurso, se definía este tipo de vivienda como aquella célula básica o vivienda semilla que, dependiendo de las necesidades y posibilidades de los habitantes, podía crecer mediante otras estancias, conformando una vivienda completa en sí misma en cada fase de crecimiento. Numerosos arquitectos de primer orden, tales como Walter Gropius, Bruno Taut, Erich Mendelsohn o Hans Scharoun, participaron en este concurso, abriendo una nueva vía de exploración dentro de la vivienda flexible, la del crecimiento programado. A partir de ese momento, en Europa, y subsecuentemente en EEUU y otras regiones desarrolladas, se iniciaron numerosas investigaciones teóricas y prácticas en torno al fenómeno del crecimiento en la vivienda desde un enfoque vinculado a la innovación, tanto espacial como técnica. Por otro lado, aunque dentro del marco de la arquitectura popular de otros países, ya se ensayaban viviendas crecederas desde el siglo XVIII debido a que, por su tamaño, eran más asequibles dentro del mercado. Desde los años treinta, numerosos países en vías de desarrollo tuvieron que lidiar con migraciones masivas del campo a la ciudad, por lo que se construyeron grandes conjuntos habitacionales que, en numerosos casos, estaban conformados por viviendas crecederas. En todos ellos, la aproximación al crecimiento de la vivienda se daba desde una perspectiva diferente a la de los países desarrollados. Se primaba la economía de medios, el uso de sistemas constructivos de bajo costo y, en muchos casos, se fomentaba incluso la autoconstrucción guiada, frente a las construcciones prefabricadas ensambladas por técnicos especializados que se proponían, por ejemplo, en los casos europeos. Para realizar esta investigación, se recopiló información de estas y otras viviendas. A continuación, se identificaron distintas maneras de producir el crecimiento, atendiendo a su posición relativa respecto de la vivienda semilla, a las que se denominó mecanismos de ampliación, utilizados indistintamente sin tener en cuenta la ubicación geográfica de cada casa. La cuestión de porqué se prefiere un mecanismo en lugar de otro en un caso determinado, desencadenó el principal objetivo de esta Tesis: la elaboración de un sistema de análisis y diagnóstico de la vivienda crecedera que, de acuerdo a determinados parámetros, permitiera indicar cuál es la ampliación o sucesión de ampliaciones óptimas para una familia concreta, en una ubicación establecida. Se partió de la idea de que el crecimiento de la vivienda está estrechamente ligado a la evolución de la unidad de convivencia que reside en ella, de manera que la casa se transformó en un hábitat dinámico. Además se atendió a la complejidad y variabilidad del fenómeno, sujeto a numerosos factores socio-económicos difícilmente previsibles en el tiempo, pero fácilmente monitorizables según unos patrones determinados vinculados a la normatividad, el número de habitantes, el ahorro medio, etc. Como consecuencia, para el diseño del sistema de optimización de la vivienda crecedera, se utilizaron patrones evolutivos. Dichos patrones, alejados ya del concepto espacial y morfológico usualmente utilizado en arquitectura por figuras como C. Alexander o J. Habraken, pasaron a entenderse como una secuencia de eventos en el tiempo (espaciales, sociales, económicos, legales, etc.), que describen el proceso de transformación y que son peculiares de cada vivienda. De esta manera, el tiempo adquirió una especial importancia al convertirse en otro material más del proyecto arquitectónico. Fue en la construcción de los patrones donde se identificaron los mencionados mecanismos de ampliación, entendidos también como sistemas de compactación de la ciudad a través de la ocupación tridimensional del espacio. Al estudiar la densidad, mediante los conceptos de holgura y hacinamiento, se aceptó la congestión de las ciudades como un valor positivo. De esta forma, las posibles transformaciones realizadas por los habitantes (previstas desde un inicio) sobre el escenario del habitar (vivienda semilla), se convirtieron también en herramientas de proyecto urbano que responden a condicionantes del lugar y de los habitantes con distintas intensidades de crecimiento, ocupación y densidad. Igualmente, en el proceso de diseño del sistema de optimización, se detectaron las estrategias para la adaptabilidad y transformación de la casa crecedera, es decir, aquella serie de acciones encaminadas a la alteración de la vivienda para facilitar su ampliación, y que engloban desde sistemas constructivos en espera, que facilitan las costuras entre crecimiento y vivienda semilla, hasta sistemas espaciales que permiten que la casa altere su uso transformándose en un hábitat productivo o en un artefacto de renta. Así como los mecanismos de ampliación están asociados a la morfología, se descubrió que su uso es independiente de la localización, y que las estrategias de adaptabilidad de la vivienda se encuentran ligadas a sistemas constructivos o procesos de gestión vinculados a una región concreta. De esta manera, la combinación de los mecanismos con las estrategias caracterizan el proceso de evolución de la vivienda, vinculándola a unos determinados condicionantes sociales, geográficos y por tanto, constructivos. Finalmente, a través de la adecuada combinación de mecanismos de ampliación y estrategias de adaptabilidad en el proyecto de la vivienda con crecimiento programado es posible optimizar su desarrollo en términos económicos, constructivos, sociales y espaciales. Como resultado, esto ayudaría no sólo a mejorar la vida de los habitantes de la vivienda semilla en términos cualitativos y cuantitativos, sino también a compactar las ciudades mediante sistemas incluyentes, ya que las casas crecederas proporcionan una mayor complejidad de usos y diversidad de relaciones sociales. ABSTRACT The growing house concept -as we currently know it- was used for the first time back in 1932 in the competition Das Wachsende Haus organized by Martin Wagner and Hans Poelzig during the International Exhibition Sonne, Luft und Haus für alle, promoted by Berlin's Tourist Office. In that competition this type of housing was defined as a basic cell or a seed house unit, and depending on the needs and capabilities of the residents it could grow by adding rooms and defining itself as a complete house unit during each growing stage. Many world-top class architects such as Walter Gropius, Bruno Taut, Erich Mendelsohn or Hans Scharoun, were part of this competition exploring a new path in the flexible housing field, the scheduled grownth. From that moment and on, in Europe -and subsequently in the USA and other developed areas- many theorical and pragmatical researchs were directed towards the growing house phenomena, coming from an initial approach related to innovation, spacial and technical innovation. Furthermore -inside the traditional architecture frame in other countries, growing houses were already tested in the XVIII century- mainly due to the size were more affordable in the Real State Market. Since the 30's decade many developing countries had to deal with massive migration movements from the countryside to cities, building large housing developments were -in many cases- formed by growing housing units. In all of these developing countries the growing house approach was drawn from a different perspective than in the developed countries. An economy of means was prioritized, the utilization of low cost construction systems and -in many cases- a guided self-construction was prioritized versus the prefabricated constructions set by specialized technics that were proposed -for instance- in the European cases. To proceed with this research, information from these -and other- housing units was gathered. From then and on different ways to perform the growing actions were identified, according to its relative position from the seed house unit, these ways were named as addition or enlargement mechanisms indifferently utilized without adknowledging the geographic location for each house. The question of why one addition mechanism is preferred over another in any given case became the main target of this Thesis; the ellaboration of an analysis and diagnosis system for the growing house -according to certain parameters- would allow to point out which is the addition or addition process more efficient for a certain family in a particular location. As a starting point the grownth of the housing unit is directly linked to the evolution of the family unit that lives on it, so the house becomes a dynamic habitat. The complexity and the variability of the phenomena was taken into consideration related to a great number of socio-economic factors hardly able to be foreseen ahead on time but easy to be monitored according to certain patterns linked to regulation, population, average savings, etc As a consequence, to design the optimization system for the growing house, evolutionary patterns were utilized. Those patterns far away from the spatial and morphologic concept normally utilized in Architecture by characters like C. Alexander or J. Habraken, started to be understood like a sequence of events on time (spatial events, social events, economic events, legal events, etc) that describes the transformation process and that are particular for each housing unit. Therefore time became something important as another ingredient in the Architectural Project. The before mentioned addition or enlargement mechanisms were identified while building the patterns; these mechanisms were also understood as city's system of compactation through the tridimendional ocupation of space. Studying density, thorough the concepts of comfort and overcrowding, traffic congestion in the city was accepted as a positive value. This way, the possible transformations made by the residents (planned from the begining) about the residencial scenary (seed house), also became tools of the urban project that are a response to site's distinctive features and to the residents with different grownth intensities, activities and density Likewise, during the process of designing the optimization system, strategies for adaptations and transformation of the growing house were detected, in other words, the serial chain of actions directed to modify the house easing its enlargement or addition, and that comprehends from constructive systems on hold -that smooths the costures between grownth and housing seed- to spatial systems that allows that the house modify its utilization, becoming a productive habitat or a rental asset. Because the enlargement mechanisms are linked to the morphology, it was discovered that the use it's not related to the location, and that the adaptation strategies of the houses are linked to constructive systems or management processes linked to a particular area. This way the combination of mechanisms and strategies characterizes the process of housing evolution, linking it to certain social and geographic peculiarities and therefore constructives. At last, through the certain combination of enlargement mechanisms and adaptability strategies in the housing with scheduled grownth project is possible to optimize its development in economic, constructive, social and spatial terms. As a result, this would help not only to improve the life of the seed house residents in qualitative and quantitative terms but also to compact the cities through inclusive systems, given that the growing houses provide a larger complexity of uses and social relations.

Assessing the suitability of student interactions from Moodle data logs as predictors of cross-curricular competencies

In the past decades, online learning has transformed the educational landscape with the emergence of new ways to learn. This fact, together with recent changes in educational policy in Europe aiming to facilitate the incorporation of graduate students to the labor market, has provoked a shift on the delivery of instruction and on the role played by teachers and students, stressing the need for development of both basic and cross-curricular competencies. In parallel, the last years have witnessed the emergence of new educational disciplines that can take advantage of the information retrieved by technology-based online education in order to improve instruction, such as learning analytics. This study explores the applicability of learning analytics for prediction of development of two cross-curricular competencies – teamwork and commitment – based on the analysis of Moodle interaction data logs in a Master’s Degree program at Universidad a Distancia de Madrid (UDIMA) where the students were education professionals. The results from the study question the suitability of a general interaction-based approach and show no relation between online activity indicators and teamwork and commitment acquisition. The discussion of results includes multiple recommendations for further research on this topic.