Hérnia perineal após disjunçao da sínfise púbica: apresentação de caso e técnica para correção

Traunatic perineal hernia remains a rare clinical entity despite an overall increase in blunt trauma. Because of the incidence of other associated injuries, the mortality is high. Most of the perineal defects are repaired during the orthopaedics surgery to reconstitute the pelvis and few patients develop a true perineal hernia without pelvic instability. A 80-year-old woman was involved in a running over accident with disjunction of pubic symphysis, dislocation of sacrum-iliac junction and fracture of pubis and ischium. The patient was submitted to an orthopaedic surgery and latter development an perineal hernia through the genitalia. The diagnosis could be established with physical examination alone. Conventional radiology, computadorized tomography, and ultrasound should also be done to progran the surgery. The repair approach was performed using a marlex mesh, fixed in the pelvic bones, Cooper ligament, and the abdominal wall. The mesh was stood in a retro- peritoneal position, rebuilding the pelvic floor without reconstruction the pelvic bones. We conclude that this is an efficient approach to repair of traumatic postoperative perineal hernia, mainly in patients with high operative risk, when the osseous repair is not necessary.

Hérnia traumática da parede abdominal

A rare case of blunt traumatic abdominal hernia is presented in which jejunal loops herniated through the abdominal wall. The patient had a serious motor vehicle accident seven years ago, while wearing the seat belt. He developed a traumatic hernia in the anterior lateral abdominal wall, which was operated, and relapsed after some months. The patient was reoperated and we observed the unattachment of the anterior lateral abdominal musculature from the ilium crest. After the hernial sac treatment, the defect was solved with the use of a polypropylene mesh. The postoperative evolution was good and four months later there were no signs of recurrence. Traumatic abdominal hernia remains a rare clinical entity, despite the increase in blunt abdominal trauma. Traumatic abdominal wall hernia falls into two general categories: small lower quadrant abdominal defects, typically the result of blunt trauma with bicycle handlebars, and larger abdominal wall defects related to motor vehicle accidents. The diagnosis may be often established by the physical examination alone. Conventional radiology and computerized tomography usefulness have been proved. In the vast majority of cases, early repair is recommended. The appropriate treatment is the reduction of the herniated bowel into the abdomen, the debridment of nonviable tissues, and a primary tension free closure of the detect.

Timolipoma simulando cardiomegalia

Thymolipoma is a rare benign tumor of the thymus. Because of its large size and pliability the mass usually drapes itself around the heart, conforming to its borders and producing a large radiographic shadow easily mistaken as cardiomegaly. This report describes a 48-year-old man with a chest radiograph strongly suggestive of cardiomegaly. Careful radiological study showed the existence of a large mass in the anterior mediastinum, simulating cardiomegaly. A thymolipoma weighing 2500g was resected through an esternotomy.

Revisão sistemática: uma revisão narrativa

OBJETIVO: realizar uma revisão narrativa sobre revisão sistemática. FONTE DOS DADOS: foi realizada busca no Cochrane Methodology Register, na Medline, na LILACS, no Google Scholar e na Cochrane Library, no período de 2000 a janeiro de 2007. Foram utilizados a busca manual das listas de referências e os contatos pessoais. SELEÇÃO DOS ESTUDOS: a estratégia de busca empregou, na Medline, as seguintes combinações dos termos MeSH: "Meta-Analysis" [Publication Type] AND "Evidence-Based Medicine"[MeSH] Limits: Publication Date from 2000 to 2007, Humans, Systematic Reviews. Na LILACS: (metanalise) or "metanalise" [Descritor de assunto] and [ medicina baseada em evidências] or "medicina baseada em evidências" [Descritor de assunto]. No Cochrane Methodology Register e no Google Scholar: "revisão sistemática e metanálise" e "medicina baseada em evidências". Após uma revisão independente por dois revisores, dez artigos que se referiam ao objetivo proposto foram selecionados. SÍNTESE DOS DADOS: os temas mencionados nos estudos foram agrupados em duas categorias: aqueles que se reportavam à história da revisão sistemática e aqueles que definiam Medicina Baseada em Evidência, revisão sistemática e metanálise. CONCLUSÃO: os autores concluem com a necessidade de mais discussões sobre revisão sistemática entre os cirurgiões.

Baço migratório em hérnia paraestomal

The authors report a case of a parastomal hernia that incarcerated a wandering spleen. We present a very rare case of an 85-year-old woman with a giant parastomal hernia. Computed tomography revealed a parastomal hernia with a wandering spleen inside. We introduce a different and simple alternative approach, with the smallest inconvenience as possible to solve the trouble. We carried out the treatment with a prosthetic repair closing the defect with ePTFE mesh, performed through a laparoscopic approach, intraperitoneal, like a tie and move the spleen back to its anatomical place. The result was excellent.

O uso da prótese na correção das hérnias da parede abdominal é um avanço, mas o seu uso indiscriminado, um abuso

The objective is to alert the surgeon about the indiscriminate use of synthetic prosthesis in the correction of inguinal and incisional hernias. The authors provide a brief history of surgery on hernias and a review of the literature, showing the importance of classifying inguinal hernias to fit the type of surgical correction with the defect found, abstaining from treating all hernias, with the same type of surgical procedure. In our opinion, small indirect inguinal hernias (type 1 and 2 of Gilbert) and hernias in women must not, in general, be treated with prostheses. The synthetic material should be reserved for direct and large indirect hernias. Even so, this attitude, besides determining a higher cost for the procedure, can lead to important complications such as infection, rejection, fistula formation, chronic pain, alterations in spermatogenesis and the possibility of carcinogenesis, according to more recent reports. The physiology and anatomy of the abdominal wall should be considered when dealing with incisional hernia corrections, where the surgeon can choose among many techniques to correct those defects, and in selected cases, utilize synthetic material. We conclude that although the use of biomaterials has constituted a great advance in surgery for abdominal wall hernia corrections because they decrease recurrences, and permit treatment of large abdominal hernias, the indiscriminate prosthesis usage is an abuse, and it can determine many serious complications, certainly avoidable with a well indicated non mesh technique .

Reparo intraperitoneal de defeitos da parede ventral do abdome com telas de poliéster com colágeno e polipropileno com ácido poliglicólico

OBJETIVO: Avaliar a incorporação de telas de poliéster revestido em uma de suas faces por colágeno (Parietex, Covidien) e polipropileno recoberto por ácido poliglicólico (Optilene Mesh Elastic e Safil, BBD Aesculap) no reparo de defeitos da parede ventral de coelhos avaliando a cicatrização no aspecto macroscópico, o depósito de colágeno e a imunomarcação tecidual pelos anticorpos MMP-1, MMP-8 e MMP-13. MÉTODOS: Utilizaram-se 16 coelhos, divididos em dois grupos de oito animais, avaliados após eutanásia após 30 e 60 dias de pós-operatório. Os animais foram submetidos à realização de dois defeitos simétricos na parede ventral do abdome, à direita e esquerda da linha alba, que compreendendo todos os folhetos musculares e o peritônio. O reparo dos defeitos foi realizado mediante implante intraperitoneal de dois modelos diferentes de telas. Utilizou-se a tela de poliéster revestido com camada protetora de colágeno (grupo controle) e a tela de polipropilene revestido com malha de ácido poliglicólico (manufaturacao própria, grupo de experimentacao). A avaliacao constou de aspectos clínicos, achados macroscópicos, análise dos colágenos tipos I/III e avaliação imunoistoquímica de metaloproteinases. RESULTADOS: Os resultados da avaliacao clínica e os parâmetros macroscópicos foram semelhantes entre os grupos. 50% dos animais do grupo Parietex tiveram ausência de aderencias intraperitoneais a no 30° dia de pós-operatrório. Em ambos os grupos observou-se reducao das aderências entre o 30° e o 60° dias de pós-operatório, contudo sem diferenca estatística. As aderências observadas foram classificadas principalmente de frouxas. Nao se observou a ocorrencia de complicacoes envolvendo vísceras intraabdominais. No Grupo Parietex houve a ocorrência de formacao de ulceracao da pele que recobria a tela em quatro animais, em comparacao com um no grupo de experimentacao. No Grupo Parietex foi observada uma insuficiencia de reparo após 60 dias. Quanto ao depósito do colágeno tipos I e III, nao houve diferenca significativa entre os grupos. Os resultados da imunoistoquímica referentes aos anticorpos MMP-1 e MMP-8 também não demonstraram diferença significativa entre as telas. CONCLUSÃO: As duas telas pesquisadas obtiveram resultados semelhantes tanto nos aspectos macro como nos microscópicos, podendo ser consideradas semelhantes quanto ao reparo de defeitos cirúrgicos da parede ventral do abdome em coelhos.

Hérnia intercostal transdiafragmática após fratura espontânea de costelas secundária à crise de tosse

One case of transdiafragmatic intercostal hernia after intense coughing fit followed by rib fractures in patient with history of pneumonia is presented. He had a severe coughing fit, developed a right toracoabdominal hematoma and then a tumor that was gradually enlarging. Image exams confirmed the diagnosis. Treatment consisted of surgical repair with the use of a polypropylene prosthetic mesh. It is a rare type of hernia. Only four cases were found in literature. The sooner the disease is diagnosed and treated the better the prognoses will be since it will prevent hernia from strangulation and incarceration.

Revisão sistemática da acurácia dos testes diagnósticos: uma revisão narrativa

Este artigo tem o objetivo de realizar uma revisão narrativa sobre revisão sistemática da acurácia dos testes diagnósticos. Foi realizada busca na Cochrane Methodology Reviews (Cochrane Reviews of Diagnostic Test Accuracy), Medline e LILACS, bem como busca manual das listas de referências dos artigos incluídos na revisão. As estratégias de busca empregadas foram as seguintes, empregando-se títulos de assuntos e termos livres: 1. na Cochrane Methodology Reviews: accuracy study "Methodology" 2. Na Pubmed "Meta-Analysis "[Publication Type] AND "Evidence-Based Medicine"[Mesh]) AND "Sensitivity and Specificity"[Mesh]; 3. Na LILACS: (revisao sistematica) or "literatura de REVISAO como assunto" [Descritor de assunto] and (sistematica) or "SISTEMATICA" [Descritor de assunto] and (acuracia) or "SENSIBILIDADE e especificidade" [Descritor de assunto]. Em suma, a preparação e o planejamento metodológicos das revisões sistemáticas de testes diagnósticos é ulterior àqueles empregados nas revisões sistemáticas das intervenções terapêuticas. Há muitas fontes de heterogeneidade nos desenhos dos estudos de teste diagnóstico, o que dificulta muito a síntese - metanálise - dos seus resultados. Para contornar esse problema, existem atualmente normas, exigidas pelas principais revistas biomédicas, para a submissão de um manuscrito sobre testes diagnósticos.

Inguinal hernias in patients of 50 years and above. Pattern and outcome

OBJECTIVE: to evaluate a one year experience with inguinal hernia repair, in patients of > 50years, with respect to the type of inguinal hernia, type of surgery, postoperative complications and recurrence. METHODS: a prospective descriptive study of patients (n=57) > 50 years operated for inguinal hernia during a one year period. Tension-free meshplasty and herniorrhaphy, using 3"x6" polypropylene mesh and 2-0 polypropylene suture, were performed in elective and emergency surgery respectively. Follow-up visits were scheduled at six weeks, three and six months postoperatively. RESULTS: the most representative age group was 61-70 years, and all patients were male. 52 (91.22%) patients had unilateral inguinal hernias, while five (8.77%) had bilateral hernias. In 50 (87.71%) patients, the hernia was uncomplicated, while seven (12.28%) patients presented with some complication such as obstruction or strangulation. Elective surgery was performed in 50 (87.71%) patients while seven (12.28%) patients were operated in emergency. Postoperatively, 50 (87.7%) patients had uneventful recovery, while seven (12.28%) patients developed some complications which were treated conservatively. Mean hospital stay was six days. One recurrence was observed and there was no peri/postoperative death. CONCLUSION: tension-free meshplasty and herniorrhaphy are safe, simple and applicable even in elderly patients after adequate pre-operative assessment and optimization. Although associated with longer hospital stay, the mortality rate is nil and complication as well as recurrence rate is low. Hence, timely repair is necessary in elderly patients even in those with comorbid conditions.

Analysis and validation of space averaged drag model for numerical simulations of gas-solid flows in fluidized beds

This thesis presents an approach for formulating and validating a space averaged drag model for coarse mesh simulations of gas-solid flows in fluidized beds using the two-fluid model. Proper modeling for fluid dynamics is central in understanding any industrial multiphase flow. The gas-solid flows in fluidized beds are heterogeneous and usually simulated with the Eulerian description of phases. Such a description requires the usage of fine meshes and small time steps for the proper prediction of its hydrodynamics. Such constraint on the mesh and time step size results in a large number of control volumes and long computational times which are unaffordable for simulations of large scale fluidized beds. If proper closure models are not included, coarse mesh simulations for fluidized beds do not give reasonable results. The coarse mesh simulation fails to resolve the mesoscale structures and results in uniform solids concentration profiles. For a circulating fluidized bed riser, such predicted profiles result in a higher drag force between the gas and solid phase and also overestimated solids mass flux at the outlet. Thus, there is a need to formulate the closure correlations which can accurately predict the hydrodynamics using coarse meshes. This thesis uses the space averaging modeling approach in the formulation of closure models for coarse mesh simulations of the gas-solid flow in fluidized beds using Geldart group B particles. In the analysis of formulating the closure correlation for space averaged drag model, the main parameters for the modeling were found to be the averaging size, solid volume fraction, and distance from the wall. The closure model for the gas-solid drag force was formulated and validated for coarse mesh simulations of the riser, which showed the verification of this modeling approach. Coarse mesh simulations using the corrected drag model resulted in lowered values of solids mass flux. Such an approach is a promising tool in the formulation of appropriate closure models which can be used in coarse mesh simulations of large scale fluidized beds.

Dismenorreia membranosa: uma doença esquecida

OBJETIVO: apresentar uma série de casos de dismenorreia membranosa. MÉTODOS: todas as pacientes foram selecionadas a partir da suspeição diagnóstica, após atendimento clínico em consultório privado por relato de dismenorreia dolorosa associada à eliminação espontânea de material elástico com formato semelhante a útero. Apenas fatos relevantes foram descritos do quadro álgico, história médica atual e pregressa e hábitos de vida. O material eliminado foi encaminhado para laboratório de patologia no qual ocorreu a análise macro e microscópica. Os casos em que não se pode provar a eliminação de material com característica membranácea não foram selecionados. Após a confirmação diagnóstica, realizou-se uma revisão da literatura até o ano de 2008 utilizando o método MeSH com o termo "membranous dysmenorrhea". RESULTADOS: três casos clínicos de dismenorreia foram transcritos. Todos os casos, além do quadro característico de dor e eliminação vaginal de material elástico, foram associados ao uso de métodos anticoncepcionais hormonais. CONCLUSÕES: embora haja apenas escassos relatos de caso de dismenorreia membranosa na literatura científica, sua etiologia deve ser suspeita em casos de dor associada a sangramento vaginal com eliminação de material elástico ou firme. O diagnóstico final é dependente do exame anatomopatológico que nunca deve ser dispensado. Observamos necessidade de mais discussões sobre esta patologia com o objetivo de manter o profissional atualizado para exercer diagnóstico e terapêutica adequados.

A Soft Contact Collision Method For Real-Time Simulation of Triangularized Geometries in Multibody Dynamics

When modeling machines in their natural working environment collisions become a very important feature in terms of simulation accuracy. By expanding the simulation to include the operation environment, the need for a general collision model that is able to handle a wide variety of cases has become central in the development of simulation environments. With the addition of the operating environment the challenges for the collision modeling method also change. More simultaneous contacts with more objects occur in more complicated situations. This means that the real-time requirement becomes more difficult to meet. Common problems in current collision modeling methods include for example dependency on the geometry shape or mesh density, calculation need increasing exponentially in respect to the number of contacts, the lack of a proper friction model and failures due to certain configurations like closed kinematic loops. All these problems mean that the current modeling methods will fail in certain situations. A method that would not fail in any situation is not very realistic but improvements can be made over the current methods.

Adaptive Routing Approaches for Networked Many-Core Systems

Through advances in technology, System-on-Chip design is moving towards integrating tens to hundreds of intellectual property blocks into a single chip. In such a many-core system, on-chip communication becomes a performance bottleneck for high performance designs. Network-on-Chip (NoC) has emerged as a viable solution for the communication challenges in highly complex chips. The NoC architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication challenges such as wiring complexity, communication latency, and bandwidth. Furthermore, the combined benefits of 3D IC and NoC schemes provide the possibility of designing a high performance system in a limited chip area. The major advantages of 3D NoCs are the considerable reductions in average latency and power consumption. There are several factors degrading the performance of NoCs. In this thesis, we investigate three main performance-limiting factors: network congestion, faults, and the lack of efficient multicast support. We address these issues by the means of routing algorithms. Congestion of data packets may lead to increased network latency and power consumption. Thus, we propose three different approaches for alleviating such congestion in the network. The first approach is based on measuring the congestion information in different regions of the network, distributing the information over the network, and utilizing this information when making a routing decision. The second approach employs a learning method to dynamically find the less congested routes according to the underlying traffic. The third approach is based on a fuzzy-logic technique to perform better routing decisions when traffic information of different routes is available. Faults affect performance significantly, as then packets should take longer paths in order to be routed around the faults, which in turn increases congestion around the faulty regions. We propose four methods to tolerate faults at the link and switch level by using only the shortest paths as long as such path exists. The unique characteristic among these methods is the toleration of faults while also maintaining the performance of NoCs. To the best of our knowledge, these algorithms are the first approaches to bypassing faults prior to reaching them while avoiding unnecessary misrouting of packets. Current implementations of multicast communication result in a significant performance loss for unicast traffic. This is due to the fact that the routing rules of multicast packets limit the adaptivity of unicast packets. We present an approach in which both unicast and multicast packets can be efficiently routed within the network. While suggesting a more efficient multicast support, the proposed approach does not affect the performance of unicast routing at all. In addition, in order to reduce the overall path length of multicast packets, we present several partitioning methods along with their analytical models for latency measurement. This approach is discussed in the context of 3D mesh networks.

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.