Corrélats neuronaux du circuit des récompenses chez les jeunes à risque parental de troubles de l'humeur

Cette thèse a pour objectif l’investigation du circuit des récompenses, sur les plans comportementaux et neuronaux, chez des adolescents à risque parental élevé de dépression majeure et de trouble bipolaire, en comparaison à des jeunes à risque parental peu élevé. Plus précisément, le but est d’identifier des marqueurs comportementaux et neuronaux du risque de développer une dépression majeure ou un trouble bipolaire, afin d’être en mesure de détecter et de prévenir ces troubles le plus tôt possible pour éviter, ou du moins retarder, leur émergence. Pour ce faire, nous avons réalisé deux études, présentées ici dans deux articles empiriques. Dans le premier article, le fonctionnement comportemental et neuronal du circuit des récompenses a été investigué au moyen d’une tâche d’anticipation et d’obtention de gains et de pertes monétaires, chez des adolescents à risque parental de dépression majeure (i.e., jeunes asymptomatiques dont un des parents souffre de dépression majeure), des adolescents à risque parental de trouble bipolaire (i.e., jeunes asymptomatiques dont un des parents souffre de trouble bipolaire) et des adolescents contrôles (i.e., jeunes asymptomatiques dont les deux parents sont en bonne santé mentale). Au niveau comportemental, les résultats ont révélé une meilleure performance chez les jeunes à risque de dépression majeure lorsqu’ils devaient éviter d’obtenir des pertes monétaires de magnitude variée (0,20$, 1$ ou 5$), ainsi qu’une meilleure performance chez les jeunes à risque de trouble bipolaire sur les essais impliquant d’éviter des pertes monétaires de magnitude nulle (0$). Au niveau neuronal, les jeunes à risque de dépression majeure démontraient une diminution de l’activation du cortex préfrontal dorsolatéral lors de l’anticipation de potentielles pertes monétaires de magnitude variée, tandis que les jeunes à risque de trouble bipolaire démontraient une diminution de l’activation du cortex préfrontal dorsolatéral lors de l’anticipation de potentielles pertes monétaires de magnitude nulle. De plus, les jeunes à risque de dépression majeure tendaient à démontrer une augmentation de l’activité du cortex orbitofrontal durant l’évitement réussi de pertes monétaires, tandis que les jeunes à risque de trouble bipolaire tendaient à démontrer une augmentation de l’activité du cortex orbitofrontal lors de l’obtention de pertes monétaires. Dans le deuxième article, l’intégrité structurelle des régions fronto-limbiques a été investiguée, au moyen de mesures du volume, de l’épaisseur corticale et de la superficie corticale. Les résultats ont mis en évidence, chez les jeunes à risque de trouble bipolaire, un volume plus élevé du cortex préfrontal dorsolatéral, par rapport aux jeunes à risque de dépression majeure et contrôles. De plus, les jeunes à risque de trouble bipolaire présentaient un volume plus élevé du cortex cingulaire postérieur, en comparaison aux jeunes à risque de dépression majeure. Enfin, une diminution de l’épaisseur corticale du cortex orbitofrontal et du gyrus frontal moyen a été observée chez les adolescents à risque de trouble bipolaire, en comparaison au groupe contrôle. L’ensemble de ces résultats démontre ainsi l’existence de particularités comportementales et d’altérations neuronales sur les plans fonctionnel et structurel, chez des jeunes à risque élevé de troubles de l’humeur, et ce, avant même l’émergence des premiers symptômes thymiques. Plus particulièrement, ces caractéristiques pourraient constituer des marqueurs du risque de développer un trouble de l’humeur. Par conséquent, ces marqueurs pourraient aider à mieux identifier les jeunes qui sont le plus à risque de développer un trouble de l’humeur, et ainsi permettre la mise en place précoce de stratégies préventives adaptées, afin d’éviter des trajectoires développementales psychopathologiques.

Production and Electrical Characterization of Low Density Polyethylene-based Micro- and Nano-dielectrics containing Graphene Oxide, Functionalized Graphene and Carbon Black additives

Oggigiorno la ricerca di nuovi materiali per gradatori di campo da impiegarsi in accessori di cavi ha iniziato a studiare alcuni materiali nano dielettrici con proprietà elettriche non lineari con la tensione ed aventi proprietà migliorate rispetto al materiale base. Per questo motivo in questo elaborato si sono studiati materiali nanostrutturati a base di polietilene a bassa densità (LDPE) contenenti nano polveri di grafene funzionalizzato (G*), ossido di grafene (GO) e carbon black (CB). Il primo obiettivo è stato quello di selezionare e ottimizzare i metodi di fabbricazione dei provini. La procedura di produzione è suddivisa in due parti. Nella prima parte è stata utilizzatala tecnica del ball-milling, mentre nella seconda un pressa termica (thermal pressing). Mediante la spettroscopia dielettrica a banda larga (BDS) si sono misurate le componenti reali e immaginarie della permettività e il modulo della conducibilità del materiale, in tensione alternata. Il miglioramento delle proprietà rispetto al provino di base composto dal solo polietilene si sono ottenute quando il quantitativo delle nanopolveri era maggiore. Le misure sono state effettuate sia a 3 V che a 1 kV. Attraverso misurazioni di termogravimetria (TGA) si è osservato l’aumento della resistenza termica di tutti i provini, soprattutto nel caso quando la % di nanopolveri è maggiore. Per i provini LDPE + 0.3 wt% GO e LDPE + 0.3 wt% G* si è misurata la resistenza alle scariche parziali attraverso la valutazione dell’erosione superficiale dei provini. Per il provino contenente G* è stato registrato una diminuzione del 22% del volume eroso, rispetto al materiale base, mentre per quello contenente GO non vi sono state variazioni significative. Infine si è ricercata la resistenza al breakdown di questi ultimi tre provini sopra citati. Per la caratterizzazione si è fatto uso della distribuzione di Weibull. Lo scale parameter α risulta aumentare solo per il provino LDPE + 0.3 wt% G*.

Corrélats neuronaux du circuit des récompenses chez les jeunes à risque parental de troubles de l'humeur

Cette thèse a pour objectif l’investigation du circuit des récompenses, sur les plans comportementaux et neuronaux, chez des adolescents à risque parental élevé de dépression majeure et de trouble bipolaire, en comparaison à des jeunes à risque parental peu élevé. Plus précisément, le but est d’identifier des marqueurs comportementaux et neuronaux du risque de développer une dépression majeure ou un trouble bipolaire, afin d’être en mesure de détecter et de prévenir ces troubles le plus tôt possible pour éviter, ou du moins retarder, leur émergence. Pour ce faire, nous avons réalisé deux études, présentées ici dans deux articles empiriques. Dans le premier article, le fonctionnement comportemental et neuronal du circuit des récompenses a été investigué au moyen d’une tâche d’anticipation et d’obtention de gains et de pertes monétaires, chez des adolescents à risque parental de dépression majeure (i.e., jeunes asymptomatiques dont un des parents souffre de dépression majeure), des adolescents à risque parental de trouble bipolaire (i.e., jeunes asymptomatiques dont un des parents souffre de trouble bipolaire) et des adolescents contrôles (i.e., jeunes asymptomatiques dont les deux parents sont en bonne santé mentale). Au niveau comportemental, les résultats ont révélé une meilleure performance chez les jeunes à risque de dépression majeure lorsqu’ils devaient éviter d’obtenir des pertes monétaires de magnitude variée (0,20$, 1$ ou 5$), ainsi qu’une meilleure performance chez les jeunes à risque de trouble bipolaire sur les essais impliquant d’éviter des pertes monétaires de magnitude nulle (0$). Au niveau neuronal, les jeunes à risque de dépression majeure démontraient une diminution de l’activation du cortex préfrontal dorsolatéral lors de l’anticipation de potentielles pertes monétaires de magnitude variée, tandis que les jeunes à risque de trouble bipolaire démontraient une diminution de l’activation du cortex préfrontal dorsolatéral lors de l’anticipation de potentielles pertes monétaires de magnitude nulle. De plus, les jeunes à risque de dépression majeure tendaient à démontrer une augmentation de l’activité du cortex orbitofrontal durant l’évitement réussi de pertes monétaires, tandis que les jeunes à risque de trouble bipolaire tendaient à démontrer une augmentation de l’activité du cortex orbitofrontal lors de l’obtention de pertes monétaires. Dans le deuxième article, l’intégrité structurelle des régions fronto-limbiques a été investiguée, au moyen de mesures du volume, de l’épaisseur corticale et de la superficie corticale. Les résultats ont mis en évidence, chez les jeunes à risque de trouble bipolaire, un volume plus élevé du cortex préfrontal dorsolatéral, par rapport aux jeunes à risque de dépression majeure et contrôles. De plus, les jeunes à risque de trouble bipolaire présentaient un volume plus élevé du cortex cingulaire postérieur, en comparaison aux jeunes à risque de dépression majeure. Enfin, une diminution de l’épaisseur corticale du cortex orbitofrontal et du gyrus frontal moyen a été observée chez les adolescents à risque de trouble bipolaire, en comparaison au groupe contrôle. L’ensemble de ces résultats démontre ainsi l’existence de particularités comportementales et d’altérations neuronales sur les plans fonctionnel et structurel, chez des jeunes à risque élevé de troubles de l’humeur, et ce, avant même l’émergence des premiers symptômes thymiques. Plus particulièrement, ces caractéristiques pourraient constituer des marqueurs du risque de développer un trouble de l’humeur. Par conséquent, ces marqueurs pourraient aider à mieux identifier les jeunes qui sont le plus à risque de développer un trouble de l’humeur, et ainsi permettre la mise en place précoce de stratégies préventives adaptées, afin d’éviter des trajectoires développementales psychopathologiques.

Independent roles of calcium and voltage-dependent potassium currents in controlling spike frequency adaptation in lateral amygdala pyramidal neurons

The calcium-dependent afterhyperpolarization (AHP) that follows trains of action potentials is responsible for controlling action potential firing patterns in many neuronal cell types. We have previously shown that the slow AHP contributes to spike frequency adaptation in pyramidal neurons in the rat lateral amygdala. In addition, a dendritic voltage-gated potassium current mediated by Kv1.2-containing channels also suppresses action potential firing in these neurons. In this paper we show that this voltage-gated potassium current and the slow AHP act together to control spike frequency adaptation in lateral amygdala pyramidal neurons. The two currents have similar effects on action potential number when firing is evoked either by depolarizing current injections or by synaptic stimulation. However, they differ in their control of firing frequency, with the voltage-gated potassium current but not the slow AHP determining the initial frequency of action potential firing. This dual mechanism of controlling firing patterns is unique to lateral amygdala neurons and is likely to contribute to the very low levels of firing seen in lateral amygdala neurons in vivo.

High-fidelity measurement and quantum feedback control in circuit QED

Circuit QED is a promising solid-state quantum computing architecture. It also has excellent potential as a platform for quantum control-especially quantum feedback control-experiments. However, the current scheme for measurement in circuit QED is low efficiency and has low signal-to-noise ratio for single-shot measurements. The low quality of this measurement makes the implementation of feedback difficult, and here we propose two schemes for measurement in circuit QED architectures that can significantly improve signal-to-noise ratio and potentially achieve quantum-limited measurement. Such measurements would enable the implementation of quantum feedback protocols and we illustrate this with a simple entanglement-stabilization scheme.

Mechanisms for triggering high-voltage breakdown in vacuum

The electrical and optical characteristics of a cylindrical alumina insulator (94% Al203) have been measured under ultra-high vacuum (P < 10-8 mBar) conditions. A high-resolution CCD camera was used to make real-time optical recordings of DC prebreakdown luminescence from the ceramic, under conditions where DC current magnitudes were limited to less than 50μA. Two concentric metallized rings formed a pair of co-axial electrodes, on the end-face of the alumina tube; a third 'transparent' electrode was employed to study the effect of an orthogonal electric field upon the radial conduction processes within the metallized alumina specimen. The wavelength-spectra of the emitted light was quantified using a high-speed scanning monochromator and photo-multiplier tube detector. Concurrent electrical measurements were made alongside the recording of optical-emission images. An observed time-dependence of the photon-emission is correlated with a time-variation observed in the DC current-voltage characteristics of the alumina. Optical images were also recorded of pulsed-field surface-flashover events on the alumina ceramic. An intensified high-speed video technique provided 1ms frames of surface-flashover events, whilst 100ns frames were achieved using an ultra high-speed fast-framing camera. By coupling this fast-frame camera to a digital storage oscilloscope, it was possible to establish a temporal correlation between the application of a voltage-pulse to the ceramic and the evolution of photonic emissions from the subsequent surface-flashover event. The electro-optical DC prebreakdown characteristics of the alumina are discussed in terms of solid-state photon-emission processes, that are believed to arise from radiative electron-recombination at vacancy-defects and substitutional impurity centres within the surface-layers of the ceramic. The physical nature of vacancy-defects within an alumina dielectric is extensively explored, with a particular focus placed upon the trapped electron energy-levels that may be present at these defect centres. Finally, consideration is given to the practical application of alumina in the trigger-ceramic of a sealed triggered vacuum gap (TVG) switch. For this purpose, a physical model describing the initiation of electrical breakdown within the TVG regime is proposed, and is based upon the explosive destabilisation of trapped charge within the alumina ceramic, triggering the onset of surface-flashover along the insulator. In the main-gap prebreakdown phase, it is suggested that the electrical-breakdown of the TVG is initiated by the low-field 'stripping' of prebreakdown electrons from vacancy-defects in the ceramic under the influence of an orthogonal main-gap electric field.

An investigation into the steady state performance of several methods of series compensating electricity transmission lines

There are several methods of providing series compensation for transmission lines using power electronic switches. Four methods of series compensation have been examined in this thesis, the thyristor controlled series capacitor, a voltage sourced inverter series compensator using a capacitor as the series element, a current sourced inverter series compensator and a voltage sourced inverter using an inductor as the series element. All the compensators examined will provide a continuously variable series voltage which is controlled by the switching of the electronic switches. Two of the circuits will offer both capacitive and inductive compensation, the thyristor controlled series capacitor and the current sourced inverter series compensator. The other two will produce either capacitive or inductive series compensation. The thyristor controlled series capacitor offers the widest range of series compensation. However, there is a band of unavailable compensation between 0 and 1 pu capacitive compensation. Compared to the other compensators examined the harmonic content of the compensating voltage is quite high. An algebraic analysis showed that there is more than one state the thyristor controlled series capacitor can operate in. This state has the undesirable effect of introducing large losses. The voltage sourced inverter series compensator using a capacitor as the series element will provide only capacitive compensation. It uses two capacitors which increase the cost of the compensator significantly above the other three. This circuit has the advantage of very low harmonic distortion. The current sourced inverter series compensator will provide both capacitive and inductive series compensation. The harmonic content of the compensating voltage is second only to the voltage sourced inverter series compensator using a capacitor as the series element. The voltage sourced inverter series compensator using an inductor as the series element will only provide inductive compensation, and it is the least expensive compensator examined. Unfortunately, the harmonics introduced by this circuit are considerable.

Short-circuit and ground fault analyses and location in VSC-based DC network cables

The application of high-power voltage-source converters (VSCs) to multiterminal dc networks is attracting research interest. The development of VSC-based dc networks is constrained by the lack of operational experience, the immaturity of appropriate protective devices, and the lack of appropriate fault analysis techniques. VSCs are vulnerable to dc-cable short-circuit and ground faults due to the high discharge current from the dc-link capacitance. However, faults occurring along the interconnecting dc cables are most likely to threaten system operation. In this paper, cable faults in VSC-based dc networks are analyzed in detail with the identification and definition of the most serious stages of the fault that need to be avoided. A fault location method is proposed because this is a prerequisite for an effective design of a fault protection scheme. It is demonstrated that it is relatively easy to evaluate the distance to a short-circuit fault using voltage reference comparison. For the more difficult challenge of locating ground faults, a method of estimating both the ground resistance and the distance to the fault is proposed by analyzing the initial stage of the fault transient. Analysis of the proposed method is provided and is based on simulation results, with a range of fault resistances, distances, and operational conditions considered.

Investigation of EDFA power transients in circuit-switched and packet-switched optical networks

Erbium-doped fibre amplifiers (EDFA’s) are a key technology for the design of all optical communication systems and networks. The superiority of EDFAs lies in their negligible intermodulation distortion across high speed multichannel signals, low intrinsic losses, slow gain dynamics, and gain in a wide range of optical wavelengths. Due to long lifetime in excited states, EDFAs do not oppose the effect of cross-gain saturation. The time characteristics of the gain saturation and recovery effects are between a few hundred microseconds and 10 milliseconds. However, in wavelength division multiplexed (WDM) optical networks with EDFAs, the number of channels traversing an EDFA can change due to the faulty link of the network or the system reconfiguration. It has been found that, due to the variation in channel number in the EDFAs chain, the output system powers of surviving channels can change in a very short time. Thus, the power transient is one of the problems deteriorating system performance. In this thesis, the transient phenomenon in wavelength routed WDM optical networks with EDFA chains was investigated. The task was performed using different input signal powers for circuit switched networks. A simulator for the EDFA gain dynamicmodel was developed to compute the magnitude and speed of the power transients in the non-self-saturated EDFA both single and chained. The dynamic model of the self-saturated EDFAs chain and its simulator were also developed to compute the magnitude and speed of the power transients and the Optical signal-to-noise ratio (OSNR). We found that the OSNR transient magnitude and speed are a function of both the output power transient and the number of EDFAs in the chain. The OSNR value predicts the level of the quality of service in the related network. It was found that the power transients for both self-saturated and non-self-saturated EDFAs are close in magnitude in the case of gain saturated EDFAs networks. Moreover, the cross-gain saturation also degrades the performance of the packet switching networks due to varying traffic characteristics. The magnitude and the speed of output power transients increase along the EDFAs chain. An investigation was done on the asynchronous transfer mode (ATM) or the WDM Internet protocol (WDM-IP) traffic networks using different traffic patterns based on the Pareto and Poisson distribution. The simulator is used to examine the amount and speed of the power transients in Pareto and Poisson distributed traffic at different bit rates, with specific focus on 2.5 Gb/s. It was found from numerical and statistical analysis that the power swing increases if the time interval of theburst-ON/burst-OFF is long in the packet bursts. This is because the gain dynamics is fast during strong signal pulse or with long duration pulses, which is due to the stimulatedemission avalanche depletion of the excited ions. Thus, an increase in output power levelcould lead to error burst which affects the system performance.

Single-phase active rectifier selection for fault tolerant machine

A fault tolerant, 5-phase PM generator has been developed for use on the low pressure (LP) shaft of an aircraft gas turbine engine. The machine operates at variable speed and therefore has a variable voltage, variable frequency electrical output (VVVF). The generator is to be used to provide a 350V DC bus for distribution throughout the aircraft, and a study has been carried out that identifies the most suitable AC-DC converter topology for this machine in terms of losses, electrical component ratings, filtering requirements and circuit complexity.

Impedance analysis of Al2O3/H-terminated diamond metal-oxide-semiconductor structures

Impedance spectroscopy (IS) analysis is carried out to investigate the electrical properties of the metal-oxide-semiconductor (MOS) structure fabricated on hydrogen-terminated single crystal diamond. The low-temperature atomic layer deposition Al2O3 is employed as the insulator in the MOS structure. By numerically analysing the impedance of the MOS structure at various biases, the equivalent circuit of the diamond MOS structure is derived, which is composed of two parallel capacitive and resistance pairs, in series connection with both resistance and inductance. The two capacitive components are resulted from the insulator, the hydrogenated-diamond surface, and their interface. The physical parameters such as the insulator capacitance are obtained, circumventing the series resistance and inductance effect. By comparing the IS and capacitance-voltage measurements, the frequency dispersion of the capacitance-voltage characteristic is discussed.

Protection schemes for meshed VSC-HVDC transmission systems for large-scale offshore wind farms

This chapter discusses network protection of high-voltage direct current (HVDC) transmission systems for large-scale offshore wind farms where the HVDC system utilizes voltage-source converters. The multi-terminal HVDC network topology and protection allocation and configuration are discussed with DC circuit breaker and protection relay configurations studied for different fault conditions. A detailed protection scheme is designed with a solution that does not require relay communication. Advanced understanding of protection system design and operation is necessary for reliable and safe operation of the meshed HVDC system under fault conditions. Meshed-HVDC systems are important as they will be used to interconnect large-scale offshore wind generation projects. Offshore wind generation is growing rapidly and offers a means of securing energy supply and addressing emissions targets whilst minimising community impacts. There are ambitious plans concerning such projects in Europe and in the Asia-Pacific region which will all require a reliable yet economic system to generate, collect, and transmit electrical power from renewable resources. Collective offshore wind farms are efficient and have potential as a significant low-carbon energy source. However, this requires a reliable collection and transmission system. Offshore wind power generation is a relatively new area and lacks systematic analysis of faults and associated operational experience to enhance further development. Appropriate fault protection schemes are required and this chapter highlights the process of developing and assessing such schemes. The chapter illustrates the basic meshed topology, identifies the need for distance evaluation, and appropriate cable models, then details the design and operation of the protection scheme with simulation results used to illustrate operation. © Springer Science+Business Media Singapore 2014.

The effect of circuit parasitics on resonant switched capacitor converters

Switched Capacitor (SC) converters have been used for several years in low-power, power electronic energy conversion systems. However, because of their attractive features such as low-weight and high-density energy conversion and with the emergence of new circuit topologies and SiC switching devices, these circuits have recently been proposed for higher power applications. The resonant switched capacitor topology is a good candidate for high-power due to its very low-switching loss, but circuit parasitic inductance and resistance can have a significant effect on the resonant frequency of each cell. This paper discusses the influence of these parasitics on the performance of the converter and proposes a method by which these parasitics can be estimated. Simulation results and measurements from a hardware prototype are used to validate the technique.

Online sensorless position estimation for switched reluctance motors using one current sensor

This paper proposes an online sensorless rotor position estimation technique for switched reluctance motors (SRMs) using just one current sensor. It is achieved by first decoupling the excitation current from the bus current. Two phase-shifted pulse width modulation signals are injected into the relevant lower transistors in the asymmetrical half-bridge converter for short intervals during each current fundamental cycle. Analog-to-digital converters are triggered in the pause middles of the dual pulse to separate the bus current for excitation current recognition. Next, the rotor position is estimated from the excitation current, by a current-rise-time method in the current-chopping-control mode in a low-speed operation and a current-gradient method in the voltage-pulse-control mode in a high-speed operation. The proposed scheme requires only a bus current sensor and a minor change to the converter circuit, without a need for individual phase current sensors or additional detection devices, achieving a more compact and cost-effective drive. The performance of the sensorless SRM drive is fully investigated. The simulation and experiments on a 750-W three-phase 12/8-pole SRM are carried out to verify the effectiveness of the proposed scheme.

DC-link voltage control strategy for reducing capacitance and total harmonic distortion in single-phase grid-connected photovoltaic inverters

High-volume capacitance is required to buffer the power difference between the input and output ports in single-phase grid-connected photovoltaic inverters, which become an obstacle to high system efficiency and long device lifetime. Furthermore, total harmonic distortion becomes serious when the system runs into low power level. In this study, a comprehensive analysis is introduced for two-stage topology with the consideration of active power, DC-link (DCL) voltage, ripple and capacitance. This study proposed a comprehensive DCL voltage control strategy to minimise the DCL capacitance while maintaining a normal system operation. Furthermore, the proposed control strategy is flexible to be integrated with the pulse-skipping control that significantly improves the power quality at light power conditions. Since the proposed control strategy needs to vary DCL voltage, an active protection scheme is also introduced to prevent any voltage violation across the DCL. The proposed control strategy is evaluated by both simulation and experiments, whose results confirm the system effectiveness.