Modeling and optimization of extracellular polysaccharides production by Enterobacter A47

Polysaccharides are gaining increasing attention as potential environmental friendly and sustainable building blocks in many fields of the (bio)chemical industry. The microbial production of polysaccharides is envisioned as a promising path, since higher biomass growth rates are possible and therefore higher productivities may be achieved compared to vegetable or animal polysaccharides sources. This Ph.D. thesis focuses on the modeling and optimization of a particular microbial polysaccharide, namely the production of extracellular polysaccharides (EPS) by the bacterial strain Enterobacter A47. Enterobacter A47 was found to be a metabolically versatile organism in terms of its adaptability to complex media, notably capable of achieving high growth rates in media containing glycerol byproduct from the biodiesel industry. However, the industrial implementation of this production process is still hampered due to a largely unoptimized process. Kinetic rates from the bioreactor operation are heavily dependent on operational parameters such as temperature, pH, stirring and aeration rate. The increase of culture broth viscosity is a common feature of this culture and has a major impact on the overall performance. This fact complicates the mathematical modeling of the process, limiting the possibility to understand, control and optimize productivity. In order to tackle this difficulty, data-driven mathematical methodologies such as Artificial Neural Networks can be employed to incorporate additional process data to complement the known mathematical description of the fermentation kinetics. In this Ph.D. thesis, we have adopted such an hybrid modeling framework that enabled the incorporation of temperature, pH and viscosity effects on the fermentation kinetics in order to improve the dynamical modeling and optimization of the process. A model-based optimization method was implemented that enabled to design bioreactor optimal control strategies in the sense of EPS productivity maximization. It is also critical to understand EPS synthesis at the level of the bacterial metabolism, since the production of EPS is a tightly regulated process. Methods of pathway analysis provide a means to unravel the fundamental pathways and their controls in bioprocesses. In the present Ph.D. thesis, a novel methodology called Principal Elementary Mode Analysis (PEMA) was developed and implemented that enabled to identify which cellular fluxes are activated under different conditions of temperature and pH. It is shown that differences in these two parameters affect the chemical composition of EPS, hence they are critical for the regulation of the product synthesis. In future studies, the knowledge provided by PEMA could foster the development of metabolically meaningful control strategies that target the EPS sugar content and oder product quality parameters.

Surgical treatment of rectal prolapse: experience and late results with 51 patients

The "best" surgical technique for the management of complete rectal prolapse remains unknown. Due to its low incidence, it is very difficult to achieve a representative number of cases, and there are no large prospective randomized trials to attest to the superiority of one operation over another. PURPOSE: Analyze the results of surgical treatment of complete rectal prolapse during 1980 and 2002. METHOD: Retrospective study. RESULTS: Fifty-one patients underwent surgical treatment during this period. The mean age was 56.7 years, with 39 females. Besides the prolapse itself, 33 patients complained of mucous discharge, 31 of fecal incontinence, 14 of constipation, 17 of rectal bleeding, and 3 of urinary incontinence. Abdominal operations were performed in 36 (71%) cases. Presacral rectopexy was the most common abdominal procedure (29 cases) followed by presacral rectopexy associated with sigmoidectomy (5 cases). The most common perineal procedure was perineal rectosigmoidectomy associated with levatorplasty (12 cases). Intraoperative bleeding from the presacral space developed in 2 cases, and a rectovaginal fistula occurred in another patient after a perineal rectosigmoidectomy. There were 2 recurrences after a mean follow-up of 49 months, which were treated by reoperation. CONCLUSION: Abdominal and perineal procedures can be used to manage complete rectal prolapse with safety and good long-term results. Age, associated medical conditions, and symptoms of fecal incontinence or constipation are the main features that one should bear in mind in order to choose the best surgical approach.

Rating corporate groups a modelling experience

This paper aims to provide a model that allows BPI to measure the credit risk, through its rating scale, of the subsidiaries included in the corporate groups who are their clients. This model should be simple enough to be applied in practice, accurate, and must give consistent results in comparison to what have been the ratings given by the bank. The model proposed includes operational, strategic, and financial factors and ends up giving one of three results: no support, partial support, or full support from the holding to the subsidiary, and each of them translates in adjustments in each subsidiary’s credit rating. As it would be expectable, most of the subsidiaries should have the same credit rating of its parent company.

Enhancing fan experience during live sports broadcasts through second screen applications

When sports fans attend live sports events, they usually engage in social experiences with friends, family members and other fans at the venue sharing the same affiliation. However, fans watching the same event through a live television broadcast end up not feeling so emotionally connected with the athletes and other fans as they would if they were watching it live, together with thousands of other fans. With this in mind, we seek to create mobile applications that deliver engaging social experiences involving remote fans watching live broadcasted sports events. Taking into account the growing use of mobile devices when watching TV broadcasts, these mobile applications explore the second screen concept, which allows users to interact with content that complements the TV broadcast. Within this context, we present a set of second screen application prototypes developed to test our concepts, the corresponding user studies and results, as well as suggestions on how to apply the prototypes’ concepts not only in different sports, but also during TV shows and electronic sports. Finally, we also present the challenges we faced and the guidelines we followed during the development and evaluation phases, which may give a considerable contribution to the development of future second screen applications for live broadcasted events.

Exploring the consumer decision journey and online shoping experience through an emotional prespective

Traditional consumer decision-making models have long used quantitative research to address a link between emotional and rational behavior. However, little qualitative research has been conducted in the area of online shopping as an end-to-end experience. This study aims to provide a detailed phenomenological account of consumers’ online shopping experience and extend Mckinsey & Companys’s consumer decision journey model from an emotional perspective. Six semi-structured interviews and a focus group of nine people are analyzed using Interpretive Phenomenology Analysis and five superordinate themes emerged from the results: emotional experience, empathy and encouragement, in relation to brand preference, emotional encounters in relation to consumer satisfaction and emotional exchange and relationship with a company or brand. A model interrelating these themes is then introduced to visually represent the emotional essence of a large online purchase. This study promises to be applicable as a descriptive, and perhaps, better predictive report for understanding the complex consumer decision-making process as it relates to online consumer behavior. Future research topics are also identified.

Aplicação do Building Information Modeling na gestão de projetos de construção

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

7to77, A new database querying experience

Nowadays, the vulgarization of information and communication technologies has reached to a level that the majority of people spend a lot of time using software to do regular tasks, ranging from games and ordinary time and weather utilities to some more sophisticated ones, like retail or banking applications. This new way of life is supported by the Internet or by specific applications that changed the image people had about using information and communication technologies. All over the world, the first cycle of studies of educational systems also has been addressed with the justification that this encourages the development of children. Taking this into consideration, we design and develop a visual explorer system for relational databases that can be used by everyone, from “7 to 77”, in an intuitive and easy way, getting immediate results – a new database querying experience. Thus, in this paper we will expose the main characteristics and features of this visual database explorer, showing how it works and how it can be used to execute the most current data manipulation operations over a database.

Modeling microbes: New methods for integrated metabolic and regulatory network reconstruction

PhD Thesis in Bioengineering

Avaliação de políticas públicas de desenvolvimento turístico das cidades de Gramado (Brasil) e Rovaniemi (Finlândia)

Tese de Doutoramento Geografia (Área de Especialização: Geografia e Planeamento Regional)

A relational algebra approach to ETL modeling

The MAP-i Doctoral Programme in Informatics, of the Universities of Minho, Aveiro and Porto

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Fused deposition modeling with polypropylene

This paper addresses the potential of polypropylene (PP) as a candidate for fused deposition modeling (FDM)-based 3D printing technique. The entire filament production chain is evaluated, starting with the PP pellets, filament production by extrusion and test samples printing. This strategy enables a true comparison between parts printed with parts manufactured by compression molding, using the same grade of raw material. Printed samples were mechanically characterized and the influence of filament orientation, layer thickness, infill degree and material was assessed. Regarding the latter, two grades of PP were evaluated: a glass-fiber reinforced and a neat, non-reinforced, one. The results showed the potential of the FDM to compete with conventional techniques, especially for the production of small series of parts/components; also, it was showed that this technique allows the production of parts with adequate mechanical performance and, therefore, does not need to be restricted to the production of mockups and prototypes.

[Editorial] Current challenges in modeling cellular metabolism

The authors would like to thank the financial support from the NovoNordiskFoundation.

Modeling separator membranes physical characteristics for optimized lithium ion battery performance

The effect of varying separator membrane physical parameters such as degree of porosity, tortuosity and thickness, on battery delivered capacity was studied in order to optimize performance of lithium-ion batteries. This was achieved by a theoretical mathematical model relating the Bruggeman coefficient with the degree of porosity and tortuosity. The inclusion of the separator membrane in the simulation model of the battery system does not affect the delivered capacity of the battery. The ionic conductivity of the separator and consequently the delivered capacity values obtained at different discharge rates depends on the value of the Bruggeman coefficient, which is related with the degree of porosity and tortuosity of the membrane. Independently of scan rate, the optimal value of the degree of porosity is above 50% and the separator thickness should range between 1 μm at 32 μm for improved battery performance.