Influence of CVD diamond tips and Er:YAG laser irradiation on bonding of different adhesive systems to dentin

Aim: The aim of this study was to compare the microtensile bond strength of three adhesive systems, using different methods of dentin preparation. Materials and methods: A hundred and eight bovine teeth were used. The dentin from buccal face was exposed and prepared with three different methods, divided in 3 groups: Group 1 (DT)- diamond tip on a high-speed handpiece; Group 2 (CVD)-CVD tip on a ultrasonic handpiece; Group 3 (LA)-Er: YAG laser. The teeth were divided into 3 subgroups, according adhesive systems used: Subgroup 1-Adper Single Bond Plus/3M ESPE (SB) total-etch adhesive; Subgroup 2-Adper Scotchbond SE/3M ESPE (AS) selfetching adhesive; Subgroup 3-Clearfil SE Bond/Kuraray (CS) selfetching adhesive. Blocks of composite (Filtek Z250-3M ESPE) 4 mm high were built up and specimens were stored in deionized water for 24 hours at 37°C. Serial mesiodistal and buccolingual cuts were made and stick-like specimens were obtained, with transversal section of 1.0 mm2. The samples were submitted to microtensile test at 1 mm/min and load of 10 kg in a universal testing machine. Data (MPa) were subjected to ANOVA and Tukey's tests (p < 0.05). Results and conclusion: Surface treatment with Diamond or CVD tips associated with Clearfil SE Bond adhesive produced significantly lower bond strength values compared to other groups. Surface treatment with Er: YAG laser associated with Single Bond Plus or Clearfil SE Bond adhesives and surface treatment with CVD tip associated with Adper Scotchbond SE adhesive produced significantly lower bond strength values compared to surface treatment with diamond or CVD tips associated with Single Bond Plus or Adper Scotchbond SE adhesives. Clinical significance: Interactions between laser and the CVD tip technologies and the different adhesive systems can produce a satisfactory bonding strength result, so that these associations may be beneficial and enhance the clinical outcomes.

Nitrate Removal on a Cu/Cu2O Photocathode under UV Irradiation and Bias Potential

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the application of nanostructured electrodes prepared by Ti/TiO2/WO3 template : A case study of removing toxicity of indigo using visible irradiation

New assays with HepG2 cells indicate that Indigo Carmine (IC), a dye that is widely used as additive in many food and pharmaceutical industries exhibited cytotoxic effects. This work describes the development of a bicomponent nanostructured Ti/TiO2/WO3 electrode prepared by template method and investigates its efficiency in a photoelectrocatalytic method by using visible light irradiation and applied potential of 1V. After 2h of treatment there are reduction of 97% discoloration, 62% of mineralization and formation of three byproducts assigned as: 2-amine-5-sulfo-benzoic acid, 2,3-dioxo-14-indole-5-sulfonic acid, and 2-amino-α-oxo-5-sulfo-benzeneacetic acid were identified by HPLC-MS/MS. But, cytotoxicity was completely removed after 120min of treatment. © 2013 Elsevier Ltd.

Effect of different pre-irradiation times on curcumin-mediated photodynamic therapy against planktonic cultures and biofilms of Candida spp

Objectives: The aim of this study was to evaluate the effects of pre-irradiation time (PIT) on curcumin (Cur)-mediated photodynamic therapy (PDT) against planktonic and biofilm cultures of reference strains of Candida albicans, Candida glabrata and Candida dubliniensis. Materials and methods: Suspensions and biofilms of Candida species were maintained in contact with different concentrations of Cur for time intervals of 1, 5, 10 and 20 min before irradiation and LED (light emitting diode) activation. Additional samples were treated only with Cur, without illumination, or only with light, without Cur. Control samples received neither light nor Cur. After PDT, suspensions were plated on Sabouraud Dextrose Agar, while biofilm results were obtained using the XTT-salt reduction method. Confocal Laser Scanning Microscopy (CLSM) observations were performed to supply a better understanding of Cur penetration through the biofilms after 5 and 20 min of contact with the cultures. Results: Different PITs showed no statistical differences in Cur-mediated PDT of Candida spp. cell suspensions. There was complete inactivation of the three Candida species with the association of 20.0 μM Cur after 5, 10 and 20 min of PIT. Biofilm cultures showed significant reduction in cell viability after PDT. In general, the three Candida species evaluated in this study suffered higher reductions in cell viability with the association of 40.0 μM Cur and 20 min of PIT. Additionally, CLSM observations showed different intensities of fluorescence emissions after 5 and 20 min of incubation. Conclusion: Photoinactivation of planktonic cultures was not PIT-dependent. PIT-dependence of the biofilm cultures differed among the species evaluated. Also, CLSM observations confirmed the need of higher time intervals for the Cur to penetrate biofilm structures. © 2012 Elsevier Ltd. All rights reserved.

Genetic parameter estimates and principal component analysis of breeding values of reproduction and growth traits in female Canchim cattle

Phenotypic data from female Canchim beef cattle were used to obtain estimates of genetic parameters for reproduction and growth traits using a linear animal mixed model. In addition, relationships among animal estimated breeding values (EBVs) for these traits were explored using principal component analysis. The traits studied in female Canchim cattle were age at first calving (AFC), age at second calving (ASC), calving interval (CI), and bodyweight at 420 days of age (BW420). The heritability estimates for AFC, ASC, CI and BW420 were 0.03±0.01, 0.07±0.01, 0.06±0.02, and 0.24±0.02, respectively. The genetic correlations for AFC with ASC, AFC with CI, AFC with BW420, ASC with CI, ASC with BW420, and CI with BW420 were 0.87±0.07, 0.23±0.02, -0.15±0.01, 0.67±0.13, -0.07±0.13, and 0.02±0.14, respectively. Standardised EBVs for AFC, ASC and CI exhibited a high association with the first principal component, whereas the standardised EBV for BW420 was closely associated with the second principal component. The heritability estimates for AFC, ASC and CI suggest that these traits would respond slowly to selection. However, selection response could be enhanced by constructing selection indices based on the principal components. © CSIRO 2013.

Photoelectrochemical properties of FTO/m-BiVO4 electrode in different electrolytes solutions under visible light irradiation

Photoelectrochemical properties of FTO/BiVO4 electrode were investigated in different electrolytic solutions, potassium chloride (KCl) and sodium sulphate (Na2SO4), and under visible light irradiation condition. In order to accomplish that, an FTO/BiVO4 electrode was built by combining the solution combustion synthesis technique with the dip-coating deposition process. The morphology and structure of the BiVO4 electrode were investigated through X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photoelectrochemical properties were analyzed through chronoamperometry measurements. Results have shown that the FTO/BiVO4 electrode presents higher electroactivity in the electrolyte Na2SO4, leading to better current stabilization, response time, and photoinduced current density, when compared to KCl electrolyte. Besides, this electrode shows excellent performance for methylene blue degradation under visible light irradiation condition. In Na2SO4, the electrode has shown higher degradation rate, 51 %, in contrast to 44 % in KCl, plus higher rate constant, 174 × 10-4 min-1 compared to 150 × 10-4 min-1 in KCl. Results presented in this communication leads to the indication of BiVO4 thin films as alternate materials to use in heterogeneous photoelectrocatalysis, more specifically in decontamination of surface water. © 2013 Springer-Verlag Berlin Heidelberg.

Relative growth, sexual maturity, and breeding season of three species of the genus Persephona (Decapoda: Brachyura: Leucosiidae): A comparative study

The relative growths of Persephona lichtensteinii, P. mediterranea, and P. punctata were investigated on the south-eastern Brazilian coast, focusing on differences in the growth rates between immature and mature phases, the onset of morphological sexual maturity, and the breeding seasons of these species. Crabs were collected every two months from January 1991 through to November 1992, from a shrimp fishing boat equipped with two otter-trawl nets. Significant differences in the patterns of body growth were observed between immature and mature phases of all three species. Changes in the growth rates of the chelipeds (males) and abdomen (females) observed for P. lichtensteinii, P. mediterranea, and P. punctata, seem to be related to the puberty moult for both sexes. Males of P. mediterranea and P. punctata reached larger mean sizes of carapace width than females, whereas no difference was recorded for P. lichtensteinii. The body size at which 50% of males attained sexual maturity was also larger in P. mediterranea and P. punctata, and smaller in P. lichtensteinii. The absence of a pronounced sexual dimorphism and the size at the onset of sexual maturity observed only for P. lichtensteinii might be explained by distinct reproductive strategies of males. The presence of ovigerous females during the entire sampling period suggests that all three species have a continuous reproduction pattern at the Ubatuba region. Future studies on the population structure, functional maturity, and mating system should improve the understanding of factors driving the biology and ecology of these species at a subtropical region. © Marine Biological Association of the United Kingdom 2013.

Ethanol electro-oxidation in an alkaline medium using Pd/C, Au/C and PdAu/C electrocatalysts prepared by electron beam irradiation

Carbon-supported Pd, Au and bimetallic PdAu (Pd:Au 90:10, 50:50 and 30:70 atomic ratios) electrocatalysts were prepared using electron beam irradiation. The obtained materials were characterized by energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and transmission electron microscopy (TEM), and their catalytic activities toward ethanol electro-oxidation were evaluated in an alkaline medium using electrochemical techniques, in situ attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) analysis and a single alkaline direct ethanol fuel cell (ADEFC). EDX analyses showed that the actual Pd: Au atomic ratios were very similar to the nominal ones. X-ray diffractograms of PdAu/C electrocatalysts evidenced the presence of Pd-rich (fcc) and Au-rich (fcc) phases. TEM analysis showed a homogeneous dispersion of nanoparticles on the carbon support, with an average size in the range of 3-5 nm and broad size distributions. Cyclic voltammetry (CV) and chronoamperometry (CA) experiments revealed the superior ambient activity toward ethanol electro-oxidation of PdAu/C electrocatalysts with Pd: Au ratios of 90:10 and 50:50. In situ ATR-FTIR spectroscopy measurements have shown that the mechanism for ethanol electro-oxidation is dependent on catalyst composition, leading to different reaction products, such as acetaldehyde and acetate, depending on the number of electrons transferred. Experiments on a single ADEFC were conducted between 50 and 900 C, and the best performance of 44 mW cm-2 in 2.0molL-1 ethanol was obtained at 850C for the Pd:Au 90:10 catalysts. This superior performance is most likely associated with enhancement of ethanol adsorption on Pd, oxidation of the intermediates, the presence of gold oxide-hydroxyl species, low mean particle diameters and better distribution of particles on the support. © 2013 Elsevier Ltd. All rights reserved.

Involvement of pituitary gonadotropins, gonadal steroids and breeding season in sex change of protogynous dusky grouper, Epinephelus marginatus (Teleostei: Serranidae), induced by a non-steroidal aromatase inhibitor

Two experiments were performed using the aromatase inhibitor (AI) letrozole (100mg/kg) to promote sex change, from female-to-male, in protogynous dusky grouper. One experiment was performed during the breeding season (spring) and the other at the end of the breeding season (summer). During the spring, AI promoted sex change after 9weeks and the sperm produced was able to fertilize grouper oocytes. During the summer, the sex change was incomplete; intersex individuals were present and sperm was not released by any of the animals. Sex changed gonads had a lamellar architecture; cysts of spermatocytes and spermatozoa in the lumen of the germinal compartment. In the spring, after 4weeks, 11ketotestosterone (11KT) levels were higher in the AI than in control fish, and after 9weeks, coincident with semen release, testosterone levels increased in the AI group, while 11KT returned to the initial levels. Estradiol (E2) levels remained unchanged during the experimental period. Instead of decreasing throughout the period, as in control group, 17 α-OH progesterone levels did not change in the AI-treated fish, resulting in higher values after 9weeks when compared with control fish. fshβ and lhβ gene expression in the AI animals were lower compared with control fish after 9weeks. The use of AI was effective to obtain functional males during the breeding season. The increase in androgens, modulated by gonadotropins, triggered the sex change, enabling the development of male germ cells, whereas a decrease in E2 levels was not required to change sex in dusky grouper. © 2013 Elsevier Inc.

Genetic parameters for scrotal circumference, breeding soundness examination and sperm defects in young Nellore bulls

A total of 51,161 records of scrotal circumference measurements at 18 mo of age (SCI 8) and 17,648 records of sperm defects and breeding soundness of Nellore bulls (mean age of 22.5 mo), raised under extensive conditions, were analyzed to estimate coefficients of heritability and genetic correlations of morphological semen traits by Bayesian inference. The observed semen traits were classified as minor (MID). major (MAD), and total sperm defects (TD). The animals were classified according to breeding soundness as satisfactory and unsatisfactory potential breeders. The (co)variance components and breeding values were estimated by Gibbs sampling using the GIBBS2F90 program under an animal model that included contemporary group as fixed effect, age of animal as linear covariate, and direct additive genetic effects as random effects. Heritabilities of 0.40 ± 0.02, 0.16 ± 0.02, 0.04 ± 0.01, 0.15 ± 0.01, and 0.10 ± 0.01 were obtained for SCI8, MID, MAD, TD, and breeding soundness, respectively. The SC18 showed a positive and moderate correlation with breeding soundness (0.56 ± 0.04) and a negative and low correlation with MID (-0.23 ± 0.03), MAD (-0.16 ± 0.02), and TD (-0.24 ± 0.02). In conclusion, scrotal circumference showed the best response to selection among the traits studied and was favorably correlated with breeding soundness and sperm morphology in young Nellore bulls. © 2013 American Society of Animal Science. All rights reserved.

Processos auto-organizados: efeitos de substâncias químicas que agem no sistema nervoso sobre o desenvolvimento e padrão de dispersão larval pós-alimentar de dípteros (Calliphoridae e Muscidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strategies to improve the efficiency of genomic selection in animal breeding programs

Pós-graduação em Zootecnia - FCAV

A genomic assisted breeding program for cassava to improve nutritional quality and industrial traits of storage root

A mandioca é cultivada como "mandioca mansa" para consumo in natura e "mandioca para indústria" como fonte de amidos e farinhas. Raças locais foram utilizadas para descoberta de "mutações espontâneas" e desenvolvimento de abordagem evolutiva e de melhoramento para estudos de função gênica. Recursos de Genômica e Proteômica foram obtidos. Análises de expressão gênica por blot de RNA e microarranjos foram desenvolvidos para identificação de expressão diferencial. "Mandioca açucarada" foi identificada, sendo relacionada com falta de expressão do gene da BEI e de uma mutação "nonsence" na sequência do gene GBSSI causando a formação do amido serose. "Mandioca avermelhada" apresentou falta de expressão do gene CasLYB, e a "amarela" uma regulação de repressão do gene CasHYb. Análise Proteômica do complexo carotenóide-proteína, juntamente com a análise de expressão de gene da CAP4, revelaram uma dupla fita de cDNA associada ao elevado acúmulo de carotenóide. Sequenciamento do gene da GBSSI identificou 22 haplótipos e grande diversidade de nucleotídios. Populações segregantes de cruzamentos de fenótipos bioquímicos diferenciados com cultivares elites dos Cerrados foram obtidas.

Ecologia da polinização do buriti (Mauritia flexuosa L. – Arecaceae) na restinga de Barreirinhas, Maranhão, Brasil

O estudo das palmeiras nativas é importante por seu grande valor econômico e na manutenção das comunidades de várias espécies de vertebrados e invertebrados que se alimentam de seus frutos, sementes e folhas. A eficiência na produção dos frutos das palmeiras está diretamente relacionada com a presença de insetos polinizadores, principalmente besouros, abelhas e moscas. A palmeira Mauritia flexuosa, comumente conhecida como buriti, é a espécie mais abundante do Brasil e é também chamada de “árvore da vida”, por ser 100% utilizável. Este trabalho teve como objetivo contribuir para o conhecimento da ecologia da polinização do buriti em ambiente de restinga, no município de Barreirinhas, Maranhão, Brasil. Para tanto, obteve-se dados sobre fenologia reprodutiva, biologia floral, sistema reprodutivo e visitantes florais. Para o acompanhamento fenológico foram selecionados 25 indivíduos de cada sexo, os quais foram observados de agosto/2009 a outubro/2012. As fenofases de floração e frutificação foram relacionadas com as variáveis climáticas através de correlação de Spearman. O processo de abertura e longevidade floral foi acompanhado durante o pico de floração da espécie, verificando-se a viabilidade polínica, a receptividade estigmática, as regiões emissoras de odor e a ocorrência de termogênese. Para determinar o sistema reprodutivo foram feitos testes de polinização cruzada e apomixia. O transporte de grãos de pólen pelo vento foi observado, por meio de lâminas de vidros untadas com vaselina que permaneceram penduradas próximas às inflorescências pistiladas durante 24 horas. Os visitantes florais foram coletados através do ensacamento de 20 inflorescências de cada sexo, sendo classificados de acordo com a frequência e o comportamento. O buriti apresentou padrão fenológico anual, sincrônico e sazonal, com floração de agosto a novembro e pico de queda dos frutos em setembro, o que corresponde à estação seca, diferindo do observado na Amazônia, onde estes eventos fenológicos ocorreram na estação chuvosa. Esta diferença pode ser justificada pela grande disponibilidade de água na região, o que faz com que o buriti não necessariamente dependa das chuvas para florescer. Este fato foi evidenciado pela correlação significativa negativa das fenofases com a precipitação e com a umidade relativa. A forte incidência solar e a disponibilidade de água no ambiente contribuíram para o sucesso na floração e frutificação do buriti. Além disto, fatores bióticos podem ter exercido influência no comportamento fenológico, cuja estratégia reprodutiva adotada parece ser a sincronização da floração e da frutificação com a atividade dos polinizadores e dispersores. Dessa maneira a espécie garante a sua reprodução em um período ótimo para a germinação de sementes e estabelecimento de plântulas. O sistema reprodutivo do buriti é xenogâmico. O conjunto de características florais, aliado à abundância de pólen e ao forte odor leva a crer que essa palmeira tenha como principal estratégia de polinização a cantarofilia, porém o vento também possui grande importância na polinização. Além de apresentar polinização do tipo misto (ambofilia), as flores do buriti atraíram uma grande variedade de visitantes, cuja riqueza foi maior que a observada na Amazônia.