Digital storytelling: student ID in higher education

Identity achievement is related to personality, as well as cognitive and interpersonal development. In tandem with the deep structural changes that have taken place in society, education must also shift towards a teaching approach focused on learning and the overall development of the student. The integration of technology may be the drive to foster the needed changes. We draw on the literature of multiple subject areas as basis for our work, namely: identity construction and self-representation, within a psychological and social standpoint; Higher Education (HE) in Portugal after Bologna, college student development and other intrinsic relationships, namely the role of emotions and interpersonal relationships in the learning process; the technological evolution of storytelling towards Digital Storytelling (DS) – the Californian model – and its connections to identity and education. Ultimately we propose DS as the aggregator capable of humanizing HE while developing essential skills and competences. Grounded on an interpretative/constructivist paradigm, we implemented a qualitative case study to explore DS in HE. In three attempts to collect student data, we gathered detailed observation notes from two Story Circles; twelve student written reflections; fourteen Digital Stories and detailed observation notes from one Story Show. We carried out three focus groups with teachers where we discussed their perceptions of each student prior to and after watching the Digital Stories, in addition to their opinion on DS in HE as a teaching and learning method and its influence on interpersonal relationships. We sought understandings of the integration of DS to analyze student selfperception and self-representation in HE contexts and intersected our findings with teachers’ perceptions of their students. We compared teachers’ and students’ perspectives, through the analysis of data collected throughout the DS process – Story Circle, Story Creation and Story Show – and triangulated that information with the students’ personal reflections and teacher perceptions. Finally we questioned if and how DS may influence teachers’ perceptions of students. We found participants to be the ultimate gatekeepers in our study. Very few students and teachers voluntarily came forth to take part in the study, confirming the challenge remains in getting participants to see the value and understand the academic rigor of DS. Despite this reluctance, DS proved to be an asset for teachers and students directly and indirectly involved in the study. DS challenges HE contexts, namely teacher established perception of students; student’s own expectations regarding learning in HE; the emotional realm, the private vs. public dichotomy and the shift in educational roles.

Desenvolvimento de programação offline e de novos processos robotizados de lixamento

Atualmente a vantagem competitiva de uma empresa passa pela sua rápida adaptação às variações de procura do mercado, sendo necessário garantir elevados níveis de produtividade e, simultaneamente, grande flexibilidade, indispensável ao fabrico de pequenos lotes. A necessidade de ajuste do processo e a diminuição da média de vida do produto levam a paragens cada vez mais frequentes da célula de fabrico para programação e afinação, com consequentes perdas de produtividade. De forma a dar resposta a estes problemas, neste trabalho é testada a viabilidade da utilização da programação e simulação offline de tarefas de lixamento na Grohe Portugal, complementando a solução com o desenvolvimento de um novo método de afinação do programa, permitindo uma adaptação às flutuações do processo produtivo. Para isso foi necessário analisar o estado da arte dos robôs industriais na área de acabamento superficial e respetivos métodos de programação. Em seguida, após um trabalho prévio rigoroso de preparação e modelação da célula de trabalho, é possível fazer a programação offline das várias rotinas e trajetórias complexas que compõem um ciclo de lixamento de um produto, contribuindo para o aumento da qualidade do produto final sem comprometer os níveis de produtividade. Nesta dissertação são descritos e detalhados alguns dos procedimentos fulcrais no sucesso da aplicação deste método de programação. Por último é feita uma nova abordagem ao método de ajuste ponto-a-ponto convencional, desenvolvendo-se para isso um sistema de ajuste automático do programa, dotando o robô da capacidade de se adaptar às variações do processo, assegurando a consistência do mesmo. Foram realizados testes em pequena escala, extrapolando-se os resultados para a aplicação deste novo método no processo produtivo da Grohe Portugal, como forma de complemento ao método convencional de ajuste ponto-a-ponto do programa, reduzindo o tempo de paragem da célula de trabalho.

Effects of a home-based exercise program in body composition, abdominal fat and lipid profile in patients with coronary artery disease

Introduction: Coronary artery disease and aging seems to be associated with a sedentary lifestyle, contributing to increased abdominal fat and consequently metabolic complications. The exercise can break this cycle by stimulating lipolysis and the use of fatty acids. In Europe there is still a lack of cardiac rehabilitation programmes in hospitals, therefore, this study aims to demonstrate the advantages of implementing home-based exercise programmes, as well as, their effects on cardiovascular prevention. This study analyzed the effects of a home-based exercise programme, in patients with coronary artery disease (myocardial infarction for 1 year), in body composition, abdominal fat, lipid profile. Methods: An ongoing randomized controlled trial with a sample of 20 participants were randomly allocated to intervention (n = 10) and control groups (n = 10). Intervention group performed a specific exercise programme during 8 weeks, consisting of ten home based exercises taking into account flexibility, muscle endurance and strength as well as cardiovascular endurance. Skinfolds thickness were measure to calculate the percentage of total fat: Skinfolds used were suprailiac, abdominal horizontal and vertical. Body mass index calculation and blood tests for lipidic profile were performed. Results: After eight weeks the intervention group decreased significantly the percentage of total fat (p < 0.05), the suprailiac skinfold (p < 0.05), the abdominal horizontal and vertical skinfold (p < 0.05) when compared with control group. In the intervention group it was observed after 8 weeks a significant decrease in body mass index, LDL-cholesterol and triglycerides. Conclusions: Home-based exercise programme influenced body composition, abdominal fat and lipid profile. These results highlight the importance of implementing home based exercises that are easy and cheap to implement in cardiac patients, in order to promote health and reduce cardiovascular risk factors.

Real-Time Application Mapping for Many-Cores Using a Limited Migrative Model

Many-core platforms are an emerging technology in the real-time embedded domain. These devices offer various options for power savings, cost reductions and contribute to the overall system flexibility, however, issues such as unpredictability, scalability and analysis pessimism are serious challenges to their integration into the aforementioned area. The focus of this work is on many-core platforms using a limited migrative model (LMM). LMM is an approach based on the fundamental concepts of the multi-kernel paradigm, which is a promising step towards scalable and predictable many-cores. In this work, we formulate the problem of real-time application mapping on a many-core platform using LMM, and propose a three-stage method to solve it. An extended version of the existing analysis is used to assure that derived mappings (i) guarantee the fulfilment of timing constraints posed on worst-case communication delays of individual applications, and (ii) provide an environment to perform load balancing for e.g. energy/thermal management, fault tolerance and/or performance reasons.

A Green Approach for Selfish Misbehavior Detection in 802.11-Based Wireless Networks

IEEE 802.11 is one of the most well-established and widely used standard for wireless LAN. Its Medium Access control (MAC) layer assumes that the devices adhere to the standard’s rules and timers to assure fair access and sharing of the medium. However, wireless cards driver flexibility and configurability make it possible for selfish misbehaving nodes to take advantages over the other well-behaving nodes. The existence of selfish nodes degrades the QoS for the other devices in the network and may increase their energy consumption. In this paper we propose a green solution for selfish misbehavior detection in IEEE 802.11-based wireless networks. The proposed scheme works in two phases: Global phase which detects whether the network contains selfish nodes or not, and Local phase which identifies which node or nodes within the network are selfish. Usually, the network must be frequently examined for selfish nodes during its operation since any node may act selfishly. Our solution is green in the sense that it saves the network resources as it avoids wasting the nodes energy by examining all the individual nodes of being selfish when it is not necessary. The proposed detection algorithm is evaluated using extensive OPNET simulations. The results show that the Global network metric clearly indicates the existence of a selfish node while the Local nodes metric successfully identified the selfish node(s). We also provide mathematical analysis for the selfish misbehaving and derived formulas for the successful channel access probability.

Sol-gel-based biosensing applied to medicinal science

Biosensors have opened new horizons in biomedical analysis, by ensuring increased assay speed and flexibility, and allowing point-of-care applications, multi-target analyses, automation and reduced costs of testing. This has been a result of many studies merging nanotechnology with biochemistry over the years, thereby enabling the creation of more suitable environments to biological receptors and their substitution by synthetic analogue materials. Sol-gel chemistry, among other materials, is deeply involved in this process. Sol-gel processing allows the immobilization of organic molecules, biomacromolecules and cells maintaining their properties and activities, permitting their integration into different transduction devices, of electrochemical or optical nature, for single or multiple analyses. Sol-gel also allows to the production of synthetic materials mimicking the activity of natural receptors, while bringing advantages, mostly in terms of cost and stability. Moreover, the biocompatibility of sol-gel materials structures of biological nature allowed the use of these materials in emerging in vivo applications. In this chapter, biosensors for biomedical applications based on sol-gel derived composites are presented, compared and described, along with current emerging applications in vivo, concerning drug delivery or biomaterials. Sol-gel materials are shown as a promising tool for current, emerging and future medical applications. - See more at: http://www.eurekaselect.com/127191/article#sthash.iPqqyhox.dpuf

Allocation of Parallel Real-Time Tasks in Distributed Multi-core Architectures supported by an FTT-SE Network

Distributed real-time systems such as automotive applications are becoming larger and more complex, thus, requiring the use of more powerful hardware and software architectures. Furthermore, those distributed applications commonly have stringent real-time constraints. This implies that such applications would gain in flexibility if they were parallelized and distributed over the system. In this paper, we consider the problem of allocating fixed-priority fork-join Parallel/Distributed real-time tasks onto distributed multi-core nodes connected through a Flexible Time Triggered Switched Ethernet network. We analyze the system requirements and present a set of formulations based on a constraint programming approach. Constraint programming allows us to express the relations between variables in the form of constraints. Our approach is guaranteed to find a feasible solution, if one exists, in contrast to other approaches based on heuristics. Furthermore, approaches based on constraint programming have shown to obtain solutions for these type of formulations in reasonable time.

A framework for using real data with distributed low cost sensors

Currently, due to the widespread use of computers and the internet, students are trading libraries for the World Wide Web and laboratories with simulation programs. In most courses, simulators are made available to students and can be used to proof theoretical results or to test a developing hardware/product. Although this is an interesting solution: low cost, easy and fast way to perform some courses work, it has indeed major disadvantages. As everything is currently being done with/in a computer, the students are loosing the “feel” of the real values of the magnitudes. For instance in engineering studies, and mainly in the first years, students need to learn electronics, algorithmic, mathematics and physics. All of these areas can use numerical analysis software, simulation software or spreadsheets and in the majority of the cases data used is either simulated or random numbers, but real data could be used instead. For example, if a course uses numerical analysis software and needs a dataset, the students can learn to manipulate arrays. Also, when using the spreadsheets to build graphics, instead of using a random table, students could use a real dataset based, for instance, in the room temperature and its variation across the day. In this work we present a framework which uses a simple interface allowing it to be used by different courses where the computers are the teaching/learning process in order to give a more realistic feeling to students by using real data. A framework is proposed based on a set of low cost sensors for different physical magnitudes, e.g. temperature, light, wind speed, which are connected to a central server, that the students have access with an Ethernet protocol or are connected directly to the student computer/laptop. These sensors use the communication ports available such as: serial ports, parallel ports, Ethernet or Universal Serial Bus (USB). Since a central server is used, the students are encouraged to use sensor values results in their different courses and consequently in different types of software such as: numerical analysis tools, spreadsheets or simply inside any programming language when a dataset is needed. In order to do this, small pieces of hardware were developed containing at least one sensor using different types of computer communication. As long as the sensors are attached in a server connected to the internet, these tools can also be shared between different schools. This allows sensors that aren't available in a determined school to be used by getting the values from other places that are sharing them. Another remark is that students in the more advanced years and (theoretically) more know how, can use the courses that have some affinities with electronic development to build new sensor pieces and expand the framework further. The final solution provided is very interesting, low cost, simple to develop, allowing flexibility of resources by using the same materials in several courses bringing real world data into the students computer works.

Manoeuvre Based Mission Control System for an Autonomous Surface Vehicle

In this work the mission control and supervision system developed for the ROAZ Autonomous Surface Vehicle is presented. Complexity in mission requirements coupled with flexibility lead to the design of a modular hierarchical mission control system based on hybrid systems control. Monitoring and supervision control for a vehicle such as ROAZ mission is not an easy task using tools with low complexity and yet powerful enough. A set of tools were developed to perform both on board mission control and remote planning and supervision. “ROAZ- Mission Control” was developed to be used in support to bathymetric and security missions performed in river and at seas.

Passive Fault-Tolerance Management in Component-based Embedded Systems

It is imperative to accept that failures can and will occur, even in meticulously designed distributed systems, and design proper measures to counter those failures. Passive replication minimises resource consumption by only activating redundant replicas in case of failures, as typically providing and applying state updates is less resource demanding than requesting execution. However, most existing solutions for passive fault tolerance are usually designed and configured at design time, explicitly and statically identifying the most critical components and their number of replicas, lacking the needed flexibility to handle the runtime dynamics of distributed component-based embedded systems. This paper proposes a cost-effective adaptive fault tolerance solution with a significant lower overhead compared to a strict active redundancy-based approach, achieving a high error coverage with the minimum amount of redundancy. The activation of passive replicas is coordinated through a feedback-based coordination model that reduces the complexity of the needed interactions among components until a new collective global service solution is determined, improving the overall maintainability and robustness of the system.

Stackelberg duopoly with demand uncertainty

We consider a symmetric Stackelberg model in which there is asymmetric demand information owned by first and second movers. We analyse the advantages of leadership and flexibility, and prove that when the leading firm faces demand uncertainty, but the follower does not, the first mover does not necessarily have advantage over the second mover. Moreover, we show that the advantage of one firm over the other depends upon the demand fluctuation and also upon the degree of substitutability of the products.

Embedded Multi-Core systems for Mixed Criticality applications in dynamic and changeable real-time environments

EMC2 finds solutions for dynamic adaptability in open systems. It provides handling of mixed criticality multicore applications in r eal-time conditions, withscalability and utmost flexibility, full-scale deployment and management of integrated tool chains, through the entire lifecycle.

Generic competencies and practices of managing by competencies: an exploratory study in different organizational contexts

Given the increasingly demanding labor market, today’s professional should act according to certain generic competencies, which allows him to perform as required by the contemporary world. In parallel, human resource management (HRM) current trends, highlight the importance that managing by competencies has in the organizational context, in the sense that it impels a more strategic and integrated HRM. The evidence of the theoretical and practical pertinence of this theme resulted in an exploratory study of a qualitative nature, which findings lead us to conclude that the most valued generic competencies by firms are flexibility, interpersonal relationship, adjustment to change and teamwork. Another finding is that HRM managing by competencies practices is characterized by informality. Managing by competencies is more frequent presence in processes as: recruitment, retention and in the employees’ development plans.

Aumento da Linguagem: Um estudo de caso

Objetivo: O autismo é uma perturbação global do desenvolvimento infantil que se prolonga por toda a vida e evolui com a idade. Carateriza-se pela presença de um desenvolvimento acentuadamente atípico na interação social e na comunicação, por um repertório de atividades e interesses marcadamente restritos, por dificuldades de flexibilidade de pensamento e de comportamento, que se exibem em comportamentos estereotipados e rígidos, associados a dificuldades na aceitação de alterações de rotinas. Dentro da grande variação possível na severidade do autismo, encontram-se crianças sem linguagem verbal e com dificuldades na comunicação por qualquer outra via, assim como se encontram crianças que apresentam linguagem verbal com um vocabulário restrito, repetitivo e não comunicativo. O objetivo principal deste trabalho é analisar e potenciar o desenvolvimento da linguagem, a aquisição de palavras e frases na criança autista, tendo em vista a generalização dos resultados. Para isso, foi realizado um estudo de caso de uma criança de 4 anos de idade com comportamentos que sugerem uma Perturbação Pervasiva do Desenvolvimento. Utilizou-se o recurso aos instrumentos de observação e entrevistas, procedendo-se à sua análise e ao desenho da intervenção a realizar. Foi implementada a intervenção “Ensinar crianças com autismo a fazer perguntas sobre objetos escondidos” na qual são utilizados brinquedos de interesse para a criança, motivacionais para a concretização do objetivo do estudo.

A Publicidade no Ensino do Inglês no 1.º Ciclo: uma abordagem didática

Numa era de globalização, de desenvolvimento tecnológico exponencial e de consumismo exacerbado, a publicidade conquistou o quotidiano das sociedades modernas e seduziu, também, as nossas crianças. Subjacente ao paradigma de que o comportamento humano dá respostas favoráveis a estímulos adequados e apresentados com oportunidade e habilidade (Caetano et al., 2011), colocamos a hipótese de utilização didática de anúncios publicitários na aula de Inglês para o desenvolvimento de competências comunicativas. Este projeto assentou no aproveitamento do potencial que a publicidade oferece, tendo em conta, por um lado, a envolvência sedutora que a torna um meio privilegiado para captar a atenção e veicular informação e, por outro, a prevalência de palavras em Inglês que nela se observa. O estudo, de natureza qualitativa, é o resultado de uma investigação-ação, na qual adotamos uma metodologia baseada num modelo descritivo e interpretativo, através de métodos qualitativos de recolha de dados e análise de informação, que teve como participantes crianças do 4.º ano de escolaridade. Desenvolvemos questionários, como instrumentos de recolha de dados, aplicados a professores e alunos. Construímos, igualmente, guiões de atividades com sugestões de exploração da publicidade no ensino da língua. Comprovamos que a publicidade, aliada ao Inglês, pode ser um valioso recurso no desenvolvimento e aprendizagem das crianças, pois é um material autêntico, motivador, atrai a atenção, possibilita o contacto com situações reais, envolve linguagem verbal e não-verbal e permite a exploração de diferentes temas, o que contribui, certamente, para a compreensão intercultural, a mobilização de saberes e o desenvolvimento do espírito crítico.