A preliminary analysis of the population genetics and molecular phylogenetics of Onchocerca volvulus (Nematoda: Filarioidea) using nuclear ribosomal second internal transcribed spacer sequences

Nuclear internal transcribed spacer 2 (ITS2) rDNA sequences were used for a molecular phylogenetics analysis of five Onchocerca species. The sister species of the human parasite O. volvulus was found to be the cattle parasite O. ochengi and not O. gibsoni, contrary to chromosomal evidence. The genetic differentiation of two African populations (representing the two African strains) and a Brazilian population of O. volvulus was also studied. Phylogenetic and network reconstruction did not show any clustering of ITS2 alleles on geographic or strain grounds. Furthermore, population genetics tests showed no indication of population differentiation but suggested gene flow among the three populations.

E-Governance and Citizen Information : The Generalitat of Catalonia in the International Context. Research report (synthesis document)

Aquest estudi té com a objectiu principal analitzar les transformacions que s'esdevenen al voltant de la incorporació d'innovacions tecnològiques de l'entorn de les TIC en els processos d'atenció al ciutadà per part de les administracions públiques. Les transformacions que hem analitzat tenen a veure amb tres dimensions que hem considerat bàsiques. D'una banda, ens hem centrat en els canvis que es produeixen en la forma en què els ciutadans (com a principals, tot i que no únics, usuaris) i l'administració es relacionen entre sí. De l'altra hem analitzat les transformacions que s'esdevenen en el funcionament intern i en la pròpia organització de l'administració arran de les transformacions dels canals de comunicació amb els usuaris. Per últim, hem considerat els canvis en la forma de gestionar (dissenyar, planificar, organitzar i dur a terme) el canvi i la innovació, tenint en compte especialment els rols dels diferents actors (no només públics) que hi participen. La recerca es recolza en un ampli estudi empíric sobre la Generalitat de Catalunya i en un estudi compartiu internacional sobre el Quebec, Emillia-Romagna i Escòcia.

Animal model to compare the effects of suture technique on cross-sectional compliance on end-to-side anastomoses.

OBJECTIVE: An animal model has been developed to compare the effects of suture technique on the luminal dimensions and compliance of end-to-side vascular anastomoses. METHODS: Carotid and internal mammalian arteries (IMAs) were exposed in three pigs (90 kg). IMAs were sectioned distally to perform end-to-side anastomoses on carotid arteries. One anastomosis was performed with 7/0 polypropylene running suture. The other was performed with the automated suture delivery device (Perclose/Abbott Labs Inc.) that makes a 7/0 polypropylene interrupted suture. Four piezoelectric crystals were sutured on toe, heel and both lateral sides of each anastomosis to measure anastomotic axes. Anastomotic cross-sectional area (CSAA) was calculated with: CSAA = pi x mM/4 where m and M are the minor and major axes of the elliptical anastomosis. Cross-sectional anastomotic compliance (CSAC) was calculated as CSAC=Delta CSAA/Delta P where Delta P is the mean pulse pressure and Delta CSAA is the mean CSAA during cardiac cycle. RESULTS: We collected a total of 1200000 pressure-length data per animal. For running suture we had a mean systolic CSAA of 26.94+/-0.4 mm(2) and a mean CSAA in diastole of 26.30+/-0.5 mm(2) (mean Delta CSAA was 0.64 mm(2)). CSAC for running suture was 4.5 x 10(-6)m(2)/kPa. For interrupted suture we had a mean CSAA in systole of 21.98+/-0.2 mm(2) and a mean CSAA in diastole of 17.38+/-0.3 mm(2) (mean Delta CSAA was 4.6+/-0.1 mm(2)). CSAC for interrupted suture was 11 x 10(-6) m(2)/kPa. CONCLUSIONS: This model, even with some limitations, can be a reliable source of information improving the outcome of vascular anastomoses. The study demonstrates that suture technique has a substantial effect on cross-sectional anastomotic compliance of end-to-side anastomoses. Interrupted suture may maximise the anastomotic lumen and provides a considerably higher CSAC than continuous suture, that reduces flow turbulence, shear stress and intimal hyperplasia. The Heartflo anastomosis device is a reliable instrument that facilitates performance of interrupted suture anastomoses.

Recerca de l'eficiència en aplicacions SIG per Android

A causa de l'increment del nombre de consumidors de dades geogràfiques, sobretot de dispositius mòbils, els sistemes d'informació geogràfica es troben davant el repte de reduir el coll d'ampolla que suposa l'arquitectura client-servidor clàssica. Una de les solucions a aquest problema és la translació de part de la intel·ligència al node client, així com la creació de xarxes descentralitzades (peer to peer),L'objectiu d'aquesta recerca és demostrar la viabilitat d'una infraestructura client mòbil-servidor, on el client no és únicament un consumidor més, si no que es torna un node intel·ligent.Per fer aquest estudi s'ha desenvolupat una aplicació pel sistema operatiu Android que consumeix dades d'OpenStreetMap. Aquesta aplicació utilitza tècniques de tessel·lat, catching i descàrrega de dades en background segons la posició de l'usuari, per facilitar el consum i reduir el flux de dades intercanviades entre el client i el servidor. També s'ha creat un servei web intern al dispositiu mòbil per a la creació de xarxes peer to peer, les quals permetin un intercanvi de dades entre els terminals mòbils. En aquest treball s'ha demostrat la viabilitat de la infraestructura a través del impacte de l'ús de les tècniques comentades anteriorment sobre el dispositiu client. Per mesurar l'impacte s'ha tingut en compte la càrrega de la CPU (la qual repercuteix al consum de la bateria) i el temps de resposta del sistema. Els resultats de les proves realitzades indiquen que aquestes tècniques redueixen el temps de cerca de punts d'interès d'una manera dràstica, però que també tenen un alt impacte a la CPU i en el temps de càrrega, sobretot en dispositius amb menys capacitats.

Nouveautés en médecine interne hospitalière 2007: perspective des chefs de clinique [Highlights 2007 in hospital-based internal medicine: the point of view from the chief residents]

L'année 2007 a été marquée par la publication de plusieurs études internationales concernant directement le quotidien de l'interniste hospitalier. Un résumé de ces travaux ne saurait être qu'un extrait condensé et forcément subjectif d'une croissante et dynamique diversité. Au gré de leurs lectures, de leurs intérêts et de leurs interrogations, les chefs de clinique du Service de médecine interne vous proposent ainsi un parcours original revisitant les thèmes de l'insuffisance cardiaque, du diabète, de l'endocardite, de la BPCO ou de la qualité des soins. Cette variété de sujets illustre à la fois le vaste champ couvert par la médecine interne actuelle, ainsi que les nombreuses incertitudes liées à la pratique médicale moderne basée sur les preuves. In 2007, several international studies brought useful information for the daily work of internists in hospital settings. This summary is of course subjective but reflects the interests and questions of the chief residents of the Department of internal medicine who wrote this article like an original trip in medical literature. This trip will allow you to review some aspects of important fields such as heart failure, diabetes, endocarditis, COPD, and quality of care. Besides the growing diversity of the fields covered by internal medicine, these various topics underline also the uncertainty internists have to face in a practice directed towards evidence.

Incremental Prognostic Value of Myocardial Blood Flow Quantification with Rb-82 Cardiac PET in Patients With Known or Suspected CAD

Rb-82cardiac PET has been used to non-invasively assess myocardial blood flow (MBF)and myocardial flow reserve (MFR). The impact of MBF and MFR for predictingmajor adverse cardiovascular events (MACE) has not been investigated in aprospective study, which was our aim. MATERIAL AND METHODS: In total, 280patients (65±10y, 36% women) with known or suspected CAD were prospectivelyenrolled. They all underwent both a rest and adenosine stress Rb-82 cardiacPET/CT. Dynamic acquisitions were processed with the FlowQuant 2.1.3 softwareand analyzed semi-quantitatively (SSS, SDS) and quantitatively (MBF, MFR) andreported using the 17-segment AHA model. Patients were stratified based on SDS,stress MBF and MFR and allocated into tertiles. For each group, annualizedevent rates were computed by dividing the number of annualized MACE (cardiacdeath, myocardial infarction, revascularisation or hospitalisation forcardiac-related event) by the sum of individual follow-up periods in years.Outcome were analysed for each group using Kaplan-Meier event-free survivalcurves and compared using the log-rank test. Multivariate analysis wasperformed in a stepwise fashion using Cox proportional hazards regressionmodels (p<0.05 for model inclusion). RESULTS: In a median follow-up of 256days (range 168-440d), 44 MACE were observed. Ischemia (SDS≥2) was observed in95 patients who had higher annualized MACE rate as compared to those without(55% vs. 9.8%, p<0.0001). The group with the lowest MFR tertile (MFR<1.76)had higher MACE rate than the two highest tertiles (51% vs. 9% and 14%,p<0.0001). Similarly, the group with the lowest stress MBF tertile(MBF<1.78mL/min/g) had the highest annualized MACE rate (41% vs. 26% and 6%,p=0.0002). On multivariate analysis, the addition of MFR or stress MBF to SDSsignificantly increased the global χ2 (from 56 to 60, p=0.04; and from56 to 63, p=0.01). The best prognostic power was obtained in a model combiningSDS (p<0.001) and stress MBF (p=0.01). Interestingly, the integration ofstress MBF enhanced risk stratification even in absence of ischemia.CONCLUSIONS: Quantification of MBF or MFR in Rb-82 cardiac PET/CT providesindependent and incremental prognostic information over semi-quantitativeassessment with SDS and is of value for risk stratification.

Evolution of a debris flow channel monitored using a 3D terrestrial laser scanner

Like numerous torrents in mountainous regions, the Illgraben creek (canton of Wallis, SW Switzerland) produces almost every year several debris flows. The total area of the active catchment is only 4.7 km², but large events ranging from 50'000 to 400'000 m³ are common (Zimmermann 2000). Consequently, the pathway of the main channel often changes suddenly. One single event can for instance fill the whole river bed and dig new several-meters-deep channels somewhere else (Bardou et al. 2003). The quantification of both, the rhythm and the magnitude of these changes, is very important to assess the variability of the bed's cross section and long profile. These parameters are indispensable for numerical modelling, as they should be considered as initial conditions. To monitor the channel evolution an Optech ILRIS 3D terrestrial laser scanner (LIDAR) was used. LIDAR permits to make a complete high precision 3D model of the channel and its surroundings by scanning it from different view points. The 3D data are treated and interpreted with the software Polyworks from Innovmetric Software Inc. Sequential 3D models allow for the determination of the variation in the bed's cross section and long profile. These data will afterwards be used to quantify the erosion and the deposition in the torrent reaches. To complete the chronological evolution of the landforms, precise digital terrain models, obtained by high resolution photogrammetry based on old aerial photographs, will be used. A 500 m long section of the Illgraben channel was scanned on 18th of August 2005 and on 7th of April 2006. These two data sets permit identifying the changes of the channel that occurred during the winter season. An upcoming scanning campaign in September 2006 will allow for the determination of the changes during this summer. Preliminary results show huge variations in the pathway of the Illgraben channel, as well as important vertical and lateral erosion of the river bed. Here we present the results of a river bank on the left (north-western) flank of the channel (Figure 1). For the August 2005 model the scans from 3 viewpoints were superposed, whereas the April 2006 3D image was obtained by combining 5 separate scans. The bank was eroded. The bank got eroded essentially on its left part (up to 6.3 m), where it is hit by the river and the debris flows (Figures 2 and 3). A debris cone has also formed (Figure 3), which suggests that a part of the bank erosion is due to shallow landslides. They probably occur when the river erosion creates an undercut slope. These geometrical data allow for the monitoring of the alluvial dynamics (i.e. aggradation and degradation) on different time scales and the influence of debris flows occurrence on these changes. Finally, the resistance against erosion of the bed's cross section and long profile will be analysed to assess the variability of these two key parameters. This information may then be used in debris flow simulation.

Financial Markets and Real Ecinomy: Four Essays in International Trade

Financial markets play an important role in an economy performing various functions like mobilizing and pooling savings, producing information about investment opportunities, screening and monitoring investments, implementation of corporate governance, diversification and management of risk. These functions influence saving rates, investment decisions, technological innovation and, therefore, have important implications for welfare. In my PhD dissertation I examine the interplay of financial and product markets by looking at different channels through which financial markets may influence an economy.My dissertation consists of four chapters. The first chapter is a co-authored work with Martin Strieborny, a PhD student from the University of Lausanne. The second chapter is a co-authored work with Melise Jaud, a PhD student from the Paris School of Economics. The third chapter is co-authored with both Melise Jaud and Martin Strieborny. The last chapter of my PhD dissertation is a single author paper.Chapter 1 of my PhD thesis analyzes the effect of financial development on growth of contract intensive industries. These industries intensively use intermediate inputs that neither can be sold on organized exchange, nor are reference-priced (Levchenko, 2007; Nunn, 2007). A typical example of a contract intensive industry would be an industry where an upstream supplier has to make investments in order to customize a product for needs of a downstream buyer. After the investment is made and the product is adjusted, the buyer may refuse to meet a commitment and trigger ex post renegotiation. Since the product is customized to the buyer's needs, the supplier cannot sell the product to a different buyer at the original price. This is referred in the literature as the holdup problem. As a consequence, the individually rational suppliers will underinvest into relationship-specific assets, hurting the downstream firms with negative consequences for aggregate growth. The standard way to mitigate the hold up problem is to write a binding contract and to rely on the legal enforcement by the state. However, even the most effective contract enforcement might fail to protect the supplier in tough times when the buyer lacks a reliable source of external financing. This suggests the potential role of financial intermediaries, banks in particular, in mitigating the incomplete contract problem. First, financial products like letters of credit and letters of guarantee can substantially decrease a risk and transaction costs of parties. Second, a bank loan can serve as a signal about a buyer's true financial situation, an upstream firm will be more willing undertake relationship-specific investment knowing that the business partner is creditworthy and will abstain from myopic behavior (Fama, 1985; von Thadden, 1995). Therefore, a well-developed financial (especially banking) system should disproportionately benefit contract intensive industries.The empirical test confirms this hypothesis. Indeed, contract intensive industries seem to grow faster in countries with a well developed financial system. Furthermore, this effect comes from a more developed banking sector rather than from a deeper stock market. These results are reaffirmed examining the effect of US bank deregulation on the growth of contract intensive industries in different states. Beyond an overall pro-growth effect, the bank deregulation seems to disproportionately benefit the industries requiring relationship-specific investments from their suppliers.Chapter 2 of my PhD focuses on the role of the financial sector in promoting exports of developing countries. In particular, it investigates how credit constraints affect the ability of firms operating in agri-food sectors of developing countries to keep exporting to foreign markets.Trade in high-value agri-food products from developing countries has expanded enormously over the last two decades offering opportunities for development. However, trade in agri-food is governed by a growing array of standards. Sanitary and Phytosanitary standards (SPS) and technical regulations impose additional sunk, fixed and operating costs along the firms' export life. Such costs may be detrimental to firms' survival, "pricing out" producers that cannot comply. The existence of these costs suggests a potential role of credit constraints in shaping the duration of trade relationships on foreign markets. A well-developed financial system provides the funds to exporters necessary to adjust production processes in order to meet quality and quantity requirements in foreign markets and to maintain long-standing trade relationships. The products with higher needs for financing should benefit the most from a well functioning financial system. This differential effect calls for a difference-in-difference approach initially proposed by Rajan and Zingales (1998). As a proxy for demand for financing of agri-food products, the sanitary risk index developed by Jaud et al. (2009) is used. The empirical literature on standards and norms show high costs of compliance, both variable and fixed, for high-value food products (Garcia-Martinez and Poole, 2004; Maskus et al., 2005). The sanitary risk index reflects the propensity of products to fail health and safety controls on the European Union (EU) market. Given the high costs of compliance, the sanitary risk index captures the demand for external financing to comply with such regulations.The prediction is empirically tested examining the export survival of different agri-food products from firms operating in Ghana, Mali, Malawi, Senegal and Tanzania. The results suggest that agri-food products that require more financing to keep up with food safety regulation of the destination market, indeed sustain longer in foreign market, when they are exported from countries with better developed financial markets.Chapter 3 analyzes the link between financial markets and efficiency of resource allocation in an economy. Producing and exporting products inconsistent with a country's factor endowments constitutes a serious misallocation of funds, which undermines competitiveness of the economy and inhibits its long term growth. In this chapter, inefficient exporting patterns are analyzed through the lens of the agency theories from the corporate finance literature. Managers may pursue projects with negative net present values because their perquisites or even their job might depend on them. Exporting activities are particularly prone to this problem. Business related to foreign markets involves both high levels of additional spending and strong incentives for managers to overinvest. Rational managers might have incentives to push for exports that use country's scarce factors which is suboptimal from a social point of view. Export subsidies might further skew the incentives towards inefficient exporting. Management can divert the export subsidies into investments promoting inefficient exporting.Corporate finance literature stresses the disciplining role of outside debt in counteracting the internal pressures to divert such "free cash flow" into unprofitable investments. Managers can lose both their reputation and the control of "their" firm if the unpaid external debt triggers a bankruptcy procedure. The threat of possible failure to satisfy debt service payments pushes the managers toward an efficient use of available resources (Jensen, 1986; Stulz, 1990; Hart and Moore, 1995). The main sources of debt financing in the most countries are banks. The disciplining role of banks might be especially important in the countries suffering from insufficient judicial quality. Banks, in pursuing their rights, rely on comparatively simple legal interventions that can be implemented even by mediocre courts. In addition to their disciplining role, banks can promote efficient exporting patterns in a more direct way by relaxing credit constraints of producers, through screening, identifying and investing in the most profitable investment projects. Therefore, a well-developed domestic financial system, and particular banking system, would help to push a country's exports towards products congruent with its comparative advantage.This prediction is tested looking at the survival of different product categories exported to US market. Products are identified according to the Euclidian distance between their revealed factor intensity and the country's factor endowments. The results suggest that products suffering from a comparative disadvantage (labour-intensive products from capital-abundant countries) survive less on the competitive US market. This pattern is stronger if the exporting country has a well-developed banking system. Thus, a strong banking sector promotes exports consistent with a country comparative advantage.Chapter 4 of my PhD thesis further examines the role of financial markets in fostering efficient resource allocation in an economy. In particular, the allocative efficiency hypothesis is investigated in the context of equity market liberalization.Many empirical studies document a positive and significant effect of financial liberalization on growth (Levchenko et al. 2009; Quinn and Toyoda 2009; Bekaert et al., 2005). However, the decrease in the cost of capital and the associated growth in investment appears rather modest in comparison to the large GDP growth effect (Bekaert and Harvey, 2005; Henry, 2000, 2003). Therefore, financial liberalization may have a positive impact on growth through its effect on the allocation of funds across firms and sectors.Free access to international capital markets allows the largest and most profitable domestic firms to borrow funds in foreign markets (Rajan and Zingales, 2003). As domestic banks loose some of their best clients, they reoptimize their lending practices seeking new clients among small and younger industrial firms. These firms are likely to be more risky than large and established companies. Screening of customers becomes prevalent as the return to screening rises. Banks, ceteris paribus, tend to focus on firms operating in comparative-advantage sectors because they are better risks. Firms in comparative-disadvantage sectors finding it harder to finance their entry into or survival in export markets either exit or refrain from entering export markets. On aggregate, one should therefore expect to see less entry, more exit, and shorter survival on export markets in those sectors after financial liberalization.The paper investigates the effect of financial liberalization on a country's export pattern by comparing the dynamics of entry and exit of different products in a country export portfolio before and after financial liberalization.The results suggest that products that lie far from the country's comparative advantage set tend to disappear relatively faster from the country's export portfolio following the liberalization of financial markets. In other words, financial liberalization tends to rebalance the composition of a country's export portfolio towards the products that intensively use the economy's abundant factors.

Three essays in control, entrepreneurship and innovation

One of the key emphases of these three essays is to provide practical managerial insight. However, good practical insight, can only be created by grounding it firmly on theoretical and empirical research. Practical experience-based understanding without theoretical grounding remains tacit and cannot be easily disseminated. Theoretical understanding without links to real life remains sterile. My studies aim to increase the understanding of how radical innovation could be generated at large established firms and how it can have an impact on business performance as most businesses pursue innovation with one prime objective: value creation. My studies focus on large established firms with sales revenue exceeding USD $ 1 billion. Usually large established firms cannot rely on informal ways of management, as these firms tend to be multinational businesses operating with subsidiaries, offices, or production facilities in more than one country. I. Internal and External Determinants of Corporate Venture Capital Investment The goal of this chapter is to focus on CVC as one of the mechanisms available for established firms to source new ideas that can be exploited. We explore the internal and external determinants under which established firms engage in CVC to source new knowledge through investment in startups. We attempt to make scholars and managers aware of the forces that influence CVC activity by providing findings and insights to facilitate the strategic management of CVC. There are research opportunities to further understand the CVC phenomenon. Why do companies engage in CVC? What motivates them to continue "playing the game" and keep their active CVC investment status. The study examines CVC investment activity, and the importance of understanding the influential factors that make a firm decide to engage in CVC. The main question is: How do established firms' CVC programs adapt to changing internal conditions and external environments. Adaptation typically involves learning from exploratory endeavors, which enable companies to transform the ways they compete (Guth & Ginsberg, 1990). Our study extends the current stream of research on CVC. It aims to contribute to the literature by providing an extensive comparison of internal and external determinants leading to CVC investment activity. To our knowledge, this is the first study to examine the influence of internal and external determinants on CVC activity throughout specific expansion and contraction periods determined by structural breaks occurring between 1985 to 2008. Our econometric analysis indicates a strong and significant positive association between CVC activity and R&D, cash flow availability and environmental financial market conditions, as well as a significant negative association between sales growth and the decision to engage into CVC. The analysis of this study reveals that CVC investment is highly volatile, as demonstrated by dramatic fluctuations in CVC investment activity over the past decades. When analyzing the overall cyclical CVC period from 1985 to 2008 the results of our study suggest that CVC activity has a pattern influenced by financial factors such as the level of R&D, free cash flow, lack of sales growth, and external conditions of the economy, with the NASDAQ price index as the most significant variable influencing CVC during this period. II. Contribution of CVC and its Interaction with R&D to Value Creation The second essay takes into account the demands of corporate executives and shareholders regarding business performance and value creation justifications for investments in innovation. Billions of dollars are invested in CVC and R&D. However there is little evidence that CVC and its interaction with R&D create value. Firms operating in dynamic business sectors seek to innovate to create the value demanded by changing market conditions, consumer preferences, and competitive offerings. Consequently, firms operating in such business sectors put a premium on finding new, sustainable and competitive value propositions. CVC and R&D can help them in this challenge. Dushnitsky and Lenox (2006) presented evidence that CVC investment is associated with value creation. However, studies have shown that the most innovative firms do not necessarily benefit from innovation. For instance Oyon (2007) indicated that between 1995 and 2005 the most innovative automotive companies did not obtain adequate rewards for shareholders. The interaction between CVC and R&D has generated much debate in the CVC literature. Some researchers see them as substitutes suggesting that firms have to choose between CVC and R&D (Hellmann, 2002), while others expect them to be complementary (Chesbrough & Tucci, 2004). This study explores the interaction that CVC and R&D have on value creation. This essay examines the impact of CVC and R&D on value creation over sixteen years across six business sectors and different geographical regions. Our findings suggest that the effect of CVC and its interaction with R&D on value creation is positive and significant. In dynamic business sectors technologies rapidly relinquish obsolete, consequently firms operating in such business sectors need to continuously develop new sources of value creation (Eisenhardt & Martin, 2000; Qualls, Olshavsky, & Michaels, 1981). We conclude that in order to impact value creation, firms operating in business sectors such as Engineering & Business Services, and Information Communication & Technology ought to consider CVC as a vital element of their innovation strategy. Moreover, regarding the CVC and R&D interaction effect, our findings suggest that R&D and CVC are complementary to value creation hence firms in certain business sectors can be better off supporting both R&D and CVC simultaneously to increase the probability of generating value creation. III. MCS and Organizational Structures for Radical Innovation Incremental innovation is necessary for continuous improvement but it does not provide a sustainable permanent source of competitiveness (Cooper, 2003). On the other hand, radical innovation pursuing new technologies and new market frontiers can generate new platforms for growth providing firms with competitive advantages and high economic margin rents (Duchesneau et al., 1979; Markides & Geroski, 2005; O'Connor & DeMartino, 2006; Utterback, 1994). Interestingly, not all companies distinguish between incremental and radical innovation, and more importantly firms that manage innovation through a one-sizefits- all process can almost guarantee a sub-optimization of certain systems and resources (Davila et al., 2006). Moreover, we conducted research on the utilization of MCS along with radical innovation and flexible organizational structures as these have been associated with firm growth (Cooper, 2003; Davila & Foster, 2005, 2007; Markides & Geroski, 2005; O'Connor & DeMartino, 2006). Davila et al. (2009) identified research opportunities for innovation management and provided a list of pending issues: How do companies manage the process of radical and incremental innovation? What are the performance measures companies use to manage radical ideas and how do they select them? The fundamental objective of this paper is to address the following research question: What are the processes, MCS, and organizational structures for generating radical innovation? Moreover, in recent years, research on innovation management has been conducted mainly at either the firm level (Birkinshaw, Hamel, & Mol, 2008a) or at the project level examining appropriate management techniques associated with high levels of uncertainty (Burgelman & Sayles, 1988; Dougherty & Heller, 1994; Jelinek & Schoonhoven, 1993; Kanter, North, Bernstein, & Williamson, 1990; Leifer et al., 2000). Therefore, we embarked on a novel process-related research framework to observe the process stages, MCS, and organizational structures that can generate radical innovation. This article is based on a case study at Alcan Engineered Products, a division of a multinational company provider of lightweight material solutions. Our observations suggest that incremental and radical innovation should be managed through different processes, MCS and organizational structures that ought to be activated and adapted contingent to the type of innovation that is being pursued (i.e. incremental or radical innovation). More importantly, we conclude that radical can be generated in a systematic way through enablers such as processes, MCS, and organizational structures. This is in line with the findings of Jelinek and Schoonhoven (1993) and Davila et al. (2006; 2007) who show that innovative firms have institutionalized mechanisms, arguing that radical innovation cannot occur in an organic environment where flexibility and consensus are the main managerial mechanisms. They rather argue that radical innovation requires a clear organizational structure and formal MCS.

Consultoria del procés de logística interna del laboratori d'anàlisis clíniques a l'Hospital General de Vic

Com a resultat de les politiques i estratègies de col·laboració entre la universitat de Vic i de l’hospital i de la voluntat de realitzar activitats formatives conjuntes , s’estableix un línia de treball orientada a l’estudi i anàlisi de la situació logística interna actual del laboratori d’anàlisis clíniques de l’Hospital General de Vic. El treball es centra en el procés intern del laboratori i l’abast de l’estudi es troba limitat a les àrees especifiques d’hematologia i coagulació i bioquímica. D’aquestes dues àrees el treball realitza un estudi exhaustiu del seu procés intern, identifica les seves activitats i la seva metodologia de treball amb l’objectiu d’elaborar el Value Stream Map de cadascuna de les àrees. Les àrees de Microbiologia, Banc de Sang i Urgències resten fora d’aquest estudi exhaustiu tot i que són presents en el treball per la inevitable interacció que tenen en la globalitat del procés. El treball es centra bàsicament en els processos automatitzats tot i que els processos que es duen a terme en el laboratori són tant automatitzats com manuals. També es limita al sistema productiu intern del laboratori tot i la interacció que té aquest sistema intern amb altres centres productius del sistema com ara són els centres d’atenció primària, els diversos hospitals i centres d’atenció sociosanitària. El laboratori es troba immers en el moment de l’elaboració d’aquest treball en un situació de canvi i millora del seus processos interns que consisteixen principalment en la substitució de part la maquinària actual que obliguen a la definició d’un nou layout i d’una nova distribució de la producció a cada màquina. A nivell extern també s’estan produint millores en el sistema informàtic de gestió que afecten a part del seu procés. L’objectiu del treball és donar visibilitat total al procés de logística interna actual del laboratori, identificant clarament com són i quina seqüència tenen els processos logístics interns i els mètodes de treball actuals, tant de recursos màquina com recursos persona, per poder identificar sota una perspectiva de generació de valor, aquells punts concrets de la logística interna que poden ser millorats en quant a eficiència i productivitat amb l’objectiu que un cop identificats es puguin emprendre accions i/o projectes de millora. El treball finalitza amb un anàlisis final del procés logística interna des d’una òptica Lean. Per fer-ho, identifica aquelles activitats que no aporten valor al procés o MUDA i les classifica en set categories i es realitzen diverses propostes de millora com són la implantació d’un flux continu , anivellat i basat en un concepte pull , identifica activitats que poden ser estandarditzades i/o simplificades i proposa modificacions en les infraestructures físiques per donar major visibilitat al procés. L’aspecte humà del procés es planteja des d’un punt de vist de metodologia, formació, comunicació i aplicació de les 5S.

Impact of community structure on information transfer

The observation that real complex networks have internal structure has important implication for dynamic processes occurring on such topologies. Here we investigate the impact of community structure on a model of information transfer able to deal with both search and congestion simultaneously. We show that networks with fuzzy community structure are more efficient in terms of packet delivery than those with pronounced community structure. We also propose an alternative packet routing algorithm which takes advantage of the knowledge of communities to improve information transfer and show that in the context of the model an intermediate level of community structure is optimal. Finally, we show that in a hierarchical network setting, providing knowledge of communities at the level of highest modularity will improve network capacity by the largest amount.

The effect of continuous positive airway pressure on total cerebral blood flow in healthy awake volunteers.

PURPOSE: Continuous positive airway pressure (CPAP) is the gold standard treatment for obstructive sleep apnea. However, the physiologic impact of CPAP on cerebral blood flow (CBF) is not well established. Ultrasound can be used to estimate CBF, but there is no widespread accepted protocol. We studied the physiologic influence of CPAP on CBF using a method integrating arterial diameter and flow velocity (FV) measurements obtained for each vessel supplying blood to the brain. METHODS: FV and lumen diameter of the left and right internal carotid, vertebral, and middle cerebral arteries were measured using duplex Doppler ultrasound with and without CPAP at 15 cm H(2)O, applied in a random order. Transcutaneous carbon dioxide (PtcCO(2)), heart rate (HR), blood pressure (BP), and oxygen saturation were monitored. Results were compared with a theoretical prediction of CBF change based on the effect of partial pressure of carbon dioxide on CBF. RESULTS: Data were obtained from 23 healthy volunteers (mean ± SD; 12 male, age 25.1 ± 2.6 years, body mass index 21.8 ± 2.0 kg/m(2)). The mean experimental and theoretical CBF decrease under CPAP was 12.5 % (p < 0.001) and 11.9 % (p < 0.001), respectively. The difference between experimental and theoretical CBF reduction was not statistically significant (3.84 ± 79 ml/min, p = 0.40). There was a significant reduction in PtcCO(2) with CPAP (p = <0.001) and a significant increase in mean BP (p = 0.0017). No significant change was observed in SaO(2) (p = 0.21) and HR (p = 0.62). CONCLUSION: Duplex Doppler ultrasound measurements of arterial diameter and FV allow for a noninvasive bedside estimation of CBF. CPAP at 15 cm H(2)O significantly decreased CBF in healthy awake volunteers. This effect appeared to be mediated predominately through the hypocapnic vasoconstriction coinciding with PCO(2) level reduction. The results suggest that CPAP should be used cautiously in patients with unstable cerebral hemodynamics.

Flow targeted 3D steady-state free-precession coronary MR angiography: comparison of three different imaging approaches.

PURPOSE: To compare 3 different flow targeted magnetization preparation strategies for coronary MR angiography (cMRA), which allow selective visualization of the vessel lumen. MATERIAL AND METHODS: The right coronary artery of 10 healthy subjects was investigated on a 1.5 Tesla MR system (Gyroscan ACS-NT, Philips Healthcare, Best, NL). A navigator-gated and ECG-triggered 3D radial steady-state free-precession (SSFP) cMRA sequence with 3 different magnetization preparation schemes was performed referred to as projection SSFP (selective labeling of the aorta, subtraction of 2 data sets), LoReIn SSFP (double-inversion preparation, selective labeling of the aorta, 1 data set), and inflow SSFP (inversion preparation, selective labeling of the coronary artery, 1 data set). Signal-to-noise ratio (SNR) of the coronary artery and aorta, contrast-to-noise ratio (CNR) between the coronary artery and epicardial fat, vessel length and vessel sharpness were analyzed. RESULTS: All cMRA sequences were successfully obtained in all subjects. Both projection SSFP and LoReIn SSFP allowed for selective visualization of the coronary arteries with excellent background suppression. Scan time was doubled in projection SSFP because of the need for subtraction of 2 data sets. In inflow SSFP, background suppression was limited to the tissue included in the inversion volume. Projection SSFP (SNR(coro): 25.6 +/- 12.1; SNR(ao): 26.1 +/- 16.8; CNR(coro-fat): 22.0 +/- 11.7) and inflow SSFP (SNR(coro): 27.9 +/- 5.4; SNR(ao): 37.4 +/- 9.2; CNR(coro-fat): 24.9 +/- 4.8) yielded significantly increased SNR and CNR compared with LoReIn SSFP (SNR(coro): 12.3 +/- 5.4; SNR(ao): 11.8 +/- 5.8; CNR(coro-fat): 9.8 +/- 5.5; P &lt; 0.05 for both). Longest visible vessel length was found with projection SSFP (79.5 mm +/- 18.9; P &lt; 0.05 vs. LoReIn) whereas vessel sharpness was best in inflow SSFP (68.2% +/- 4.5%; P &lt; 0.05 vs. LoReIn). Consistently good image quality was achieved using inflow SSFP likely because of the simple planning procedure and short scanning time. CONCLUSION: Three flow targeted cMRA approaches are presented, which provide selective visualization of the coronary vessel lumen and in addition blood flow information without the need of contrast agent administration. Inflow SSFP yielded highest SNR, CNR and vessel sharpness and may prove useful as a fast and efficient approach for assessing proximal and mid vessel coronary blood flow, whereas requiring less planning skills than projection SSFP or LoReIn SSFP.

GIS-based debris flow source and runout susceptibility assessment from DEM data - a case study in NW Nicaragua

In October 1998, Hurricane Mitch triggered numerous landslides (mainly debris flows) in Honduras and Nicaragua, resulting in a high death toll and in considerable damage to property. The potential application of relatively simple and affordable spatial prediction models for landslide hazard mapping in developing countries was studied. Our attention was focused on a region in NW Nicaragua, one of the most severely hit places during the Mitch event. A landslide map was obtained at 1:10 000 scale in a Geographic Information System (GIS) environment from the interpretation of aerial photographs and detailed field work. In this map the terrain failure zones were distinguished from the areas within the reach of the mobilized materials. A Digital Elevation Model (DEM) with 20 m×20 m of pixel size was also employed in the study area. A comparative analysis of the terrain failures caused by Hurricane Mitch and a selection of 4 terrain factors extracted from the DEM which, contributed to the terrain instability, was carried out. Land propensity to failure was determined with the aid of a bivariate analysis and GIS tools in a terrain failure susceptibility map. In order to estimate the areas that could be affected by the path or deposition of the mobilized materials, we considered the fact that under intense rainfall events debris flows tend to travel long distances following the maximum slope and merging with the drainage network. Using the TauDEM extension for ArcGIS software we generated automatically flow lines following the maximum slope in the DEM starting from the areas prone to failure in the terrain failure susceptibility map. The areas crossed by the flow lines from each terrain failure susceptibility class correspond to the runout susceptibility classes represented in a runout susceptibility map. The study of terrain failure and runout susceptibility enabled us to obtain a spatial prediction for landslides, which could contribute to landslide risk mitigation.

Estimating vadose zone hydraulic properties using ground penetrating radar: The impact of prior information

A number of geophysical methods, such as ground-penetrating radar (GPR), have the potential to provide valuable information on hydrological properties in the unsaturated zone. In particular, the stochastic inversion of such data within a coupled geophysical-hydrological framework may allow for the effective estimation of vadose zone hydraulic parameters and their corresponding uncertainties. A critical issue in stochastic inversion is choosing prior parameter probability distributions from which potential model configurations are drawn and tested against observed data. A well chosen prior should reflect as honestly as possible the initial state of knowledge regarding the parameters and be neither overly specific nor too conservative. In a Bayesian context, combining the prior with available data yields a posterior state of knowledge about the parameters, which can then be used statistically for predictions and risk assessment. Here we investigate the influence of prior information regarding the van Genuchten-Mualem (VGM) parameters, which describe vadose zone hydraulic properties, on the stochastic inversion of crosshole GPR data collected under steady state, natural-loading conditions. We do this using a Bayesian Markov chain Monte Carlo (MCMC) inversion approach, considering first noninformative uniform prior distributions and then more informative priors derived from soil property databases. For the informative priors, we further explore the effect of including information regarding parameter correlation. Analysis of both synthetic and field data indicates that the geophysical data alone contain valuable information regarding the VGM parameters. However, significantly better results are obtained when we combine these data with a realistic, informative prior.