Embankment Quality Phase IV: Application to Unsuitable Soils, TR-492, 2007

The Quality Management Earthwork (QM-E) special provision was implemented on a pilot project to evaluate quality control (QC) and quality assurance (QA) testing in predominately unsuitable soils. Control limits implemented on this pilot project included the following: 95% relative compaction, moisture content not exceeding +/- 2% of optimum moisture content, soil strength not exceeding a dynamic cone penetrometer (DCP) index of 70 mm/blow, vertical uniformity not exceeding a variation in DCP index of 40 mm/blow, and lift thickness not exceeding depth determined through construction of control strips. Four-point moving averages were used to allow for some variability in the measured parameter values. Management of the QC/QA data proved to be one of the most challenging aspects of the pilot project. Implementing use of the G-RAD data collection system has considerable potential to reduce the time required to develop and maintain QC/QA records for projects using the QM-E special provision. In many cases, results of a single Proctor test were used to establish control limits that were used for several months without retesting. While the data collected for the pilot project indicated that the DCP index control limits could be set more tightly, there is not enough evidence to support making a change. In situ borings, sampling, and testing in natural unsuitable cut material and compacted fill material revealed that the compacted fill had similar strength characteristics to that of the natural cut material after less than three months from the start of construction.

ICN Insider, April 2011

The ICN, a state agency, is the country’s premier fiber-optic Network, committed to continued enhancement of distance learning and providing Iowans with convenient, equal access to education, government, and healthcare. This newsletter is produced monthly by the ICN of all the programs and activities of this department.

ICN Insider, May-June 2015

The ICN, a state agency, is the country’s premier fiber-optic Network, committed to continued enhancement of distance learning and providing Iowans with convenient, equal access to education, government, and healthcare. This newsletter is produced monthly by the ICN of all the programs and activities of this department.

ICN Insider, July-August 2015

The ICN, a state agency, is the country’s premier fiber-optic Network, committed to continued enhancement of distance learning and providing Iowans with convenient, equal access to education, government, and healthcare. This newsletter is produced monthly by the ICN of all the programs and activities of this department.

ICN Insider,September-October 2015

The ICN, a state agency, is the country’s premier fiber-optic Network, committed to continued enhancement of distance learning and providing Iowans with convenient, equal access to education, government, and healthcare. This newsletter is produced monthly by the ICN of all the programs and activities of this department.

Creando redes, estableciendo sinergias: la contribución de la investigación a la educación. I Simposio internacional REUNI+D

[spa] Este texto recoge las contribuciones al I Seminario internacional REUNI+D. Creando redes, estableciendo sinergias: la contribución de la investigación a la educación, que tuvo lugar en Barcelona el 11 de octubre de 2013. La organización del seminario partió de la necesidad de contribuir a la difusión, el intercambio y la discusión de las aportaciones y resultados de la investigación educativa y sus implicaciones para la mejora de la educación. Sus finalidades fueron: (a) Ofrecer una visión de conjunto de los ámbitos y temas de investigación abordados en los últimos años por los miembros de REUNI+D y los grupos que participaron en el evento; y (b) Debatir la capacidad de los investigadores para intervenir en las decisiones sobre políticas de investigación y reivindicar su papel como interlocutores a la hora de establecerlas.

Final Report (SPR Project 90-00-RB10-012) on the Maintenance Asset Management Project Phase I, 2012

This project resulted in the development of a proof of concept for a features inventory process to be used by field staff. The resulting concept is adaptable for different asset classes (e.g. culverts, guardrail) and able to leverage existing DOT resources such as the videolog and LRS and our current technology platforms including Oracle and our GIS web infrastructure. The concept examined the feasibility of newly available technologies, such as mobile devices, while balancing ease of use in the field. Implementation and deployment costs were also important considerations in evaluating the success of the project. These project funds allowed the pilot to address the needs of two DOT districts. A report of findings was prepared, including recommendations for or against full deployment of the pilot solution.

Final Report (SPR Project 90-00-RB10-012) on the Maintenance Asset Management Project Phase II, 2013

This project resulted in the development of a proof of concept for a features inventory process to be used by field staff. The resulting concept is adaptable for different asset classes (e.g. culverts, guardrail) and able to leverage existing DOT resources such as the videolog and LRS and our current technology platforms including Oracle and our GIS web infrastructure. The concept examined the feasibility of newly available technologies, such as mobile devices, while balancing ease of use in the field. Implementation and deployment costs were also important considerations in evaluating the success of the project. These project funds allowed the pilot to address the needs of two DOT districts. A report of findings was prepared, including recommendations for a full deployment of a field data collection.

Dynamic Modelling of Material Flows and Sustainable Resource Use: Case Studies in Regional Metabolism and Space Life Support Systems

Sustainable resource use is one of the most important environmental issues of our times. It is closely related to discussions on the 'peaking' of various natural resources serving as energy sources, agricultural nutrients, or metals indispensable in high-technology applications. Although the peaking theory remains controversial, it is commonly recognized that a more sustainable use of resources would alleviate negative environmental impacts related to resource use. In this thesis, sustainable resource use is analysed from a practical standpoint, through several different case studies. Four of these case studies relate to resource metabolism in the Canton of Geneva in Switzerland: the aim was to model the evolution of chosen resource stocks and flows in the coming decades. The studied resources were copper (a bulk metal), phosphorus (a vital agricultural nutrient), and wood (a renewable resource). In addition, the case of lithium (a critical metal) was analysed briefly in a qualitative manner and in an electric mobility perspective. In addition to the Geneva case studies, this thesis includes a case study on the sustainability of space life support systems. Space life support systems are systems whose aim is to provide the crew of a spacecraft with the necessary metabolic consumables over the course of a mission. Sustainability was again analysed from a resource use perspective. In this case study, the functioning of two different types of life support systems, ARES and BIORAT, were evaluated and compared; these systems represent, respectively, physico-chemical and biological life support systems. Space life support systems could in fact be used as a kind of 'laboratory of sustainability' given that they represent closed and relatively simple systems compared to complex and open terrestrial systems such as the Canton of Geneva. The chosen analysis method used in the Geneva case studies was dynamic material flow analysis: dynamic material flow models were constructed for the resources copper, phosphorus, and wood. Besides a baseline scenario, various alternative scenarios (notably involving increased recycling) were also examined. In the case of space life support systems, the methodology of material flow analysis was also employed, but as the data available on the dynamic behaviour of the systems was insufficient, only static simulations could be performed. The results of the case studies in the Canton of Geneva show the following: were resource use to follow population growth, resource consumption would be multiplied by nearly 1.2 by 2030 and by 1.5 by 2080. A complete transition to electric mobility would be expected to only slightly (+5%) increase the copper consumption per capita while the lithium demand in cars would increase 350 fold. For example, phosphorus imports could be decreased by recycling sewage sludge or human urine; however, the health and environmental impacts of these options have yet to be studied. Increasing the wood production in the Canton would not significantly decrease the dependence on wood imports as the Canton's production represents only 5% of total consumption. In the comparison of space life support systems ARES and BIORAT, BIORAT outperforms ARES in resource use but not in energy use. However, as the systems are dimensioned very differently, it remains questionable whether they can be compared outright. In conclusion, the use of dynamic material flow analysis can provide useful information for policy makers and strategic decision-making; however, uncertainty in reference data greatly influences the precision of the results. Space life support systems constitute an extreme case of resource-using systems; nevertheless, it is not clear how their example could be of immediate use to terrestrial systems.

El impacto de las TIC en la empresa turística : el caso de Cataluña

En aquest article s'aporten proves de l'impacte positiu que té l'aplicació de les tecnologies de la informació i la comunicació (TIC) en l'empresa turística catalana. La transcendència que en els darrers anys ha adquirit el mercat turístic català en el context europeu el converteix en un laboratori d'anàlisi idoni per al sector. Els resultats obtinguts posen de manifest que l'ús d'aquestes tecnologies s'acompanya d'un major grau d'internacionalització de l'empresa, el desenvolupament de canvis organitzatius i la implantació de noves estratègies competitives, cosa que dóna lloc a un model de negoci allunyat de les concepcions tradicionals del sector. A més, l'ús estratègic de les TIC afavoreix l'ús de mà d'obra més qualificada, un servei més personalitzat i una major proximitat a proveïdors i distribuïdors. Tanmateix, és en el procés d'innovació empresarial on l'impacte positiu de les TIC és percep més, atès que el seu ús ha contribuït a superar alguns dels obstacles existents, a interioritzar el procés en el si de l'empresa i a fer més partícips els mateixos treballadors, i això ha donat com a resultat una àmplia diversitat d'innovacions de tota mena (de producte, de procés i organitzatives). La participació en xarxes de cooperació, el fet de tenir treballadors amb un nivell educatiu elevat i l'aplicació intensiva de les TIC han estat elements indispensables en aquest procés innovador. Finalment, gràcies a l'ús de les TIC i el seu impacte en la innovació, però també al canvi organitzatiu dins l'empresa, s'han millorat els registres de productivitat, amb la qual cosa s'afavoreix una major competitivitat en un context canviant i de forta pressió de l'entorn.

Technology News, April-June 2015

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.

Technology News, July-September 2015

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.

Technology News, October-December 2015

Technology News is a newsletter produced by the Iowa Department of Transportation to provide information to the transportation specialist in Iowa's cities and counties. Technology News is one of CTRE's primary avenues for exchanging transportation-related information with local agencies. The bimonthly newsletter gives an up-to-date look to the up-to-date information our 2,500+ readers have grown to expect.

Report of the Workshop on Intelligent Construction for Earthworks: April 14-16, 2009

The objectives of this workshop were to update the strategies identified during the 2008 workshop; provide a collaborative exchange of ideas and experiences; share research results; increase participants' knowledge; develop research, education, and implementation initiatives for intelligent compaction (IC) and automated machine guidance (AMG) technologies; and develop strategies to move forward. The 2 1/2 day workshop was organized as follows: Day 1: Review of 2008 workshop proceedings, technical presentations on IC and AMG technologies, and participating state department of transportation (DOT) briefings. Day 2: Industry/equipment manufacturer presentations and breakout interactive sessions on three topic areas. Day 3: Breakout session summary reporting and panel discussion involving state DOT, contractor, and industry representatives. The results of the breakout sessions on day 2 were analyzed to identify the priorities for advancement in each of the three topic areas. Key issues for each topic were prioritized by reviewing the recorder's notes in detail, finding common topics among sessions, and summarizing the participant votes.

Work Zone Simulation Model, 1999

To support the analysis of driver behavior at rural freeway work zone lane closure merge points, Center for Transportation Research and Education staff collected traffic data at merge areas using video image processing technology. The collection of data and the calculation of the capacity of lane closures are reported in a companion report, "Traffic Management Strategies for Merge Areas in Rural Interstate Work Zones". These data are used in the work reported in this document and are used to calibrate a microscopic simulation model of a typical, Iowa rural freeway lane closure. The model developed is a high fidelity computer simulation with an animation interface. It simulates traffic operations at a work zone lane closure. This model enables traffic engineers to visually demonstrate the forecasted delay that is likely to result when freeway reconstruction makes it necessary to close freeway lanes. Further, the model is also sensitive to variations in driver behavior and is used to test the impact of slow moving vehicles and other driver behaviors. This report consists of two parts. The first part describes the development of the work zone simulation model. The simulation analysis is calibrated and verified through data collected at a work zone in Interstate Highway 80 in Scott County, Iowa. The second part is a user's manual for the simulation model, which is provided to assist users with its set up and operation. No prior computer programming skills are required to use the simulation model.