Analysis of the direct and indirect costs of treatment of imported malaria in the Slovak Republic

This study analyzed the approximate cost of treatment of patients hospitalized with a diagnosis of imported malaria in Slovakia. Between 2003 and 2007, 15 patients with imported malaria were hospitalized. The mean direct cost of the treatment was 970.75 euros and the mean indirect cost was 53.15 euros. For the patient with the highest cost of treatment, the use of mefloquine prophylaxis would have represented only 0.5% of the total direct cost of treating the disease. Despite the partial resistance of plasmodia, malaria chemoprophylaxis is unequivocally a cheaper choice than subsequent treatment of malaria.

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

Quantitative analysis of collagen and elastic fibers in the transversalis fascia in direct and indirect inguinal hernia

PURPOSE: Our previous studies demonstrated structural and quantitative age-related changes of the elastic fibers in transversalis fascia, which may play a role in inguinal hernia formation. To verify whether there were differences in the extracellular matrix between direct and indirect inguinal hernia, we studied the amount of collagen and elastic fibers in the transversalis fascia of 36 male patients with indirect inguinal hernia and 21 with direct inguinal hernia. MATERIAL AND METHODS: Transversalis fascia fragments were obtained during surgical intervention and underwent histological quantitative analysis of collagen by colorimetry and analysis of elastic fibers by histomorphometry. RESULTS: We demonstrated significantly lower amounts of collagen and higher amounts of elastic fibers in transversalis fascia from patients with direct inguinal hernia compared to indirect inguinal hernia patients. The transversalis fascia from direct inguinal hernia patients showed structural changes of the mature and elaunin elastic fibers, which are responsible for elasticity, and lower density of oxytalan elastic fibers, which are responsible for resistance. These changes promoted loss of resiliency of the transversalis fascia. CONCLUSION: These results improve our understanding of the participation of the extracellular matrix in the genesis of direct inguinal hernia, suggesting a relationship with genetic defects of the elastic fiber and collagen synthesis.

Ethical leadership and reputation: Combined indirect effects on organizational deviance

This is a pre-copyedited, author-produced PDF of an article accepted for publication in Journal of Business Ethics following peer review. The version of record Neves, P., & Story, J. (2015). Ethical Leadership and Reputation: Combined Indirect Effects on Organizational Deviance. Journal of Business Ethics, 127(1), 165–176. “The final publication is available at Springer via http://dx.doi.org/10.1007/s10551-013-1997-3”.

Endemic pemphigus foliaceus (fogo selvagem) and pemphigus vulgaris: immunoglobulin G heterogeneity detected by indirect immunofluorescence

Pemphigus are autoimmune intraepidermal blistering diseases in which immunoglobulin G (IgG) autoantibodies are directed against desmosomal glycoproteins. The aim of this study was to determine the IgG subclass profile of endemic pemphigus foliaceus (fogo selvagem) and pemphigus vulgaris utilizing indirect immunofluorescence. PATIENTS AND METHODS: Twenty-five patients with pemphigus vulgaris, 25 with endemic pemphigus foliaceus (fogo selvagem), and 25 healthy controls were analyzed by indirect immunofluorescence for circulating autoantibodies (total IgG and its subclasses). RESULTS: Our data revealed a significant correlation (P <.05) of disease activity and autoantibody levels in both forms of pemphigus, i.e., negative titers related to clinical remission, whereas positive results related to active disease. Immunoglobulin G subclass analysis in fogo selvagem demonstrated that in patients in remission, 56% showed positive immunoglobulin G4; in active disease, immunoglobulin G4 was the predominant subclass (100% positive in all cases). The IgG subclass profile in pemphigus vulgaris showed that in patients in remission, only 10% were positive for immunoglobulin G4; in active disease, positivity for immunoglobulin G4 was present in 78% to 88% of the cases. CONCLUSION: Subclass characterization of immunoglobulin G autoantibodies is a useful tool for pemphigus follow-up, since immunoglobulin G4 (IgG4) is the subclass that is closely related to recognition of pathogenic epitopes, and consequently with disease activity. Careful monitoring should be performed for fogo selvagem in clinical remission with a homogeneous IgG4 response, since this may indicate more frequent relapses.

Flexural strengthening of RC beams using hybrid composite plate (HCP): experimental and analytical study

Hybrid Composite Plate (HCP) is a reliable recently proposed retrofitting solution for concrete structures, which is composed of a strain hardening cementitious composite (SHCC) plate reinforced with Carbon Fibre Reinforced Polymer (CFRP). This system benefits from the synergetic advantages of these two composites, namely the high ductility of SHCC and the high tensile strength of CFRPs. In the materialstructural of HCP, the ultra-ductile SHCC plate acts as a suitable medium for stress transfer between CFRP laminates (bonded into the pre-sawn grooves executed on the SHCC plate) and the concrete substrate by means of a connection system made by either chemical anchors, adhesive, or a combination thereof. In comparison with traditional applications of FRP systems, HCP is a retrofitting solution that (i) is less susceptible to the detrimental effect of the lack of strength and soundness of the concrete cover in the strengthening effectiveness; (ii) assures higher durability for the strengthened elements and higher protection to the FRP component in terms of high temperatures and vandalism; and (iii) delays, or even, prevents detachment of concrete substrate. This paper describes the experimental program carried out, and presents and discusses the relevant results obtained on the assessment of the performance of HCP strengthened reinforced concrete (RC) beams subjected to flexural loading. Moreover, an analytical approach to estimate the ultimate flexural capacity of these beams is presented, which was complemented with a numerical strategy for predicting their load-deflection behaviour. By attaching HCP to the beams’ soffit, a significant increase in the flexural capacity at service, at yield initiation of the tension steel bars and at failure of the beams can be achieved, while satisfactory deflection ductility is assured and a high tensile capacity of the CFRP laminates is mobilized. Both analytical and numerical approaches have predicted with satisfactory agreement, the load-deflection response of the reference beam and the strengthened ones tested experimentally.

Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material

Given the need for using more sustainable constructive solutions, an innovative composite material based on a combination of distinct industrial by-products is proposed aiming to reduce waste and energy consumption in the production of construction materials. The raw materials are thermal activated flue-gas desulphurization (FGD) gypsum, which acts as a binder, granulated cork as the aggregate and recycled textile fibres from used tyres intended to reinforce the material. This paper presents the results of the design of the composite mortar mixes, the characterization of the key physical properties (density, porosity and ultrasonic pulse velocity) and the mechanical validation based on uniaxial compressive tests and fracture energy tests. In the experimental campaign, the influence of the percentage of the raw materials in terms of gypsum mass, on the mechanical properties of the composite material was assessed. It was observed that the percentage of granulated cork decreases the compressive strength of the composite material but contributes to the increase in the compressive fracture energy. Besides, the recycled textile fibres play an important role in the mode I fracture process and in the fracture energy of the composite material, resulting in a considerable increase in the mode I fracture energy.

Design and optimization of an extrusion die for the production of wood–plastic composite profiles

In this work, the optimization of an extrusion die designed for the production of a wood–plastic composite (WPC) decking profile is investigated. The optimization was performed with the help of numerical tools, more precisely, by solving the continuity and momentum conservation equations that govern such flow, and aiming to balance properly the flow distribution at the extrusion die flow channel outlet. To capture the rheological behavior of the material, we used a Bird-Carreau model with parameters obtained from a fit to the (shear viscosity versus shearrate) experimental data, collected from rheological tests. To yield a balanced output flow, several numerical runs were performed by adjusting the flow restriction at different regions of the flow-channel parallel zone crosssection. The simulations were compared with the experimental results and an excellent qualitative agreement was obtained, allowing, in this way, to attain a good balancing of the output flow and emphasizing the advantages of using numerical tools to aid the design of profile extrusion dies.

One-step in situ synthesis of polyamide microcapsules with inorganic payload and their transformation into responsive thermoplastic composite materials

Well-dispersed loads of finely powdered metals, metal oxides, several carbon allotropes or nanoclays are incorporated into highly porous polyamide 6 microcapsules in controllable amounts via an original one-step in situ fabrication technique. It is based on activated anionic polymerization (AAP) of ε-caprolactam in a hydrocarbon solvent performed in the presence of the respective micro- or nanosized loads. The forming microcapsules with typical diameters of 25-50 µm entrap up to 40 wt% of load. Their melt processing produces hybrid thermoplastic composites. Mechanical, electric conductivity and magnetic response measurements show that transforming of in situ loaded microcapsules into composites by melt processing (MP) is a facile and rapid method to fabricate materials with high mechanical resistance and electro-magnetic characteristics sufficient for many industrial applications. This novel concept requires low polymerization temperatures, no functionalization or compatibilization of the loads and it is easy to scale up at industrial production levels.

Development of hybrid composite plate (HCP) for strengthening and repair of RC structures

Tese de Doutoramento em Engenharia Civil

Transitions to fatherhood in East Germany in the 1990s : psychological determinants of childbearing and the meaning of entering into parenthood for young adults from Rostock ; an event-history and qualitative composite investigation within the Rostock longitudinal survey

East Germany, men, fertility, first births, event history analysis, problem-centered interviews, methodical integration, triangulation, social psychology, gender

Indirect immunofluorescence(IgG and IgM) tests for toxoplasmosis on 203 persons, with no symptomatology suggesting the disease, located in the city of Rio de Janeiro. Serological follow up one to two years later.

Clinical and serological follow up examinations were performed on 203 persons, from three to twenty years of age, from the otolaryngology department of a hospital in the city of Rio de Janeiro, with no symptomatology suggesting toxoplasmosis, but suffering from chronic tonsillitis. According to results obtained during the first indirect immunofluorescence tests, the patients were divided into following groups: Group I (non-reactive IgG and IgM), 98 persons (48.3%); Group II (1:16 ≤ IgG ≤ 1:256 and non-reactive IgM), 74 persons (36.5%); Group III (IgM ≥ 1:1024 and non-reactive IgM), 18 persons (8.8%), and Group IV (IgG and IgM reactive), 13 persons (6.4%). One to two years later, 131 (64.5%) of the 203 persons were reexamined by a second indirect immunofluorescence test. In the case of 66 persons (Group I) whose serum was non-reactive in the IgG and IgM classes during the first indirect immunofluorescence test, serum conversion was observed in aproximately 21.2%. in 65 individuals (49.6%), (Groups II, III and IV),with reactive serum in the IgG classes during the first indirect immunofluorescence test, the second reaction showed an increase in titres in 20% of the cases, a decrease in 67.7% of the cases, or no alterations in 12.3 of the cases. In the IgM class, all 131 sera were non-reactive at 116 dilution the second immunofluorescence test, including the 13 cases that had previously been reactive in the immunoglobulin class, Symptomatology suggesting toxoplasmosis was only observed in one case during the second testing, this patient's principal physical sign being hypertrophied lymph nodes. during this period, the Toxoplasma antibodies showed titres of IgG 1:32000 and non-reactive IgM, whilst one year previously, during the first test, these titres were IgG 1:1024 and IgM 1:64. Differences in the age, sex and skin coloring of patients were not statistically significant as regards alterations in the indirect immunofluorescence test titres.

Correlation of wear in vivo and six laboratory wear methods.

OBJECTIVE: We examined the correlation between clinical wear rates of restorative materials and enamel (TRAC Research Foundation, Provo, USA) and the results of six laboratory test methods (ACTA, Alabama (generalized, localized), Ivoclar (vertical, volumetric), Munich, OHSU (abrasion, attrition), Zurich). METHODS: Individual clinical wear data were available from clinical trials that were conducted by TRAC Research Foundation (formerly CRA) together with general practitioners. For each of the n=28 materials (21 composite resins for intra-coronal restorations [20 direct and 1 indirect], 5 resin materials for crowns, 1 amalgam, enamel) a minimum of 30 restorations had been placed in posterior teeth, mainly molars. The recall intervals were up to 5 years with the majority of materials (n=27) being monitored, however, only for up to 2 years. For the laboratory data, the databases MEDLINE and IADR abstracts were searched for wear data on materials which were also clinically tested by TRAC Research Foundation. Only those data for which the same test parameters (e.g. number of cycles, loading force, type of antagonist) had been published were included in the study. A different quantity of data was available for each laboratory method: Ivoclar (n=22), Zurich (n=20), Alabama (n=17), OHSU and ACTA (n=12), Munich (n=7). The clinical results were summed up in an index and a linear mixed model was fitted to the log wear measurements including the following factors: material, time (0.5, 1, 2 and 3 years), tooth (premolar/molar) and gender (male/female) as fixed effects, and patient as random effect. Relative ranks were created for each material and method; the same was performed with the clinical results. RESULTS: The mean age of the subjects was 40 (±12) years. The materials had been mostly applied in molars (81%) and 95% of the intracoronal restorations were Class II restorations. The mean number of individual wear data per material was 25 (range 14-42). The mean coefficient of variation of clinical wear data was 53%. The only significant correlation was reached by OHSU (abrasion) with a Spearman r of 0.86 (p=0.001). Zurich, ACTA, Alabama generalized wear and Ivoclar (volume) had correlation coefficients between 0.3 and 0.4. For Zurich, Alabama generalized wear and Munich, the correlation coefficient improved if only composites for direct use were taken into consideration. The combination of different laboratory methods did not significantly improve the correlation. SIGNIFICANCE: The clinical wear of composite resins is mainly dependent on differences between patients and less on the differences between materials. Laboratory methods to test conventional resins for wear are therefore less important, especially since most of them do not reflect the clinical wear.

Indirect immunofluorescence test in new world Leishmaniasis: serological and clinical relation-ship

The indirect immunofluorescence test (IF) for anti-Leishmania antibodies (IgC and IgM) was performed with sera form the following groups of individuals: 214 cutaneous leishmaniasis patients, 28 healthy subjects with positive Montenegro's skin test (MST), 29 healthy subjects with negativeMST and 16 visceral leishmaniasis patients. The first four groups came from a suburban area of Rio de Janeiro (Jacarepaguá) where cutaneous leishmaniasis caused by Leishmania braziliensis braziliensis is endemic. It was observed that IF-IgM titers were significantly higher amongst the cutaneous leishmaniasis patients with less than four months of disease as compared to those with longer periods and that IF-IgG titers were significantly higher in patients with multiple lesions as compared to those with single lesions. The visceral leishmaniasis patients had IF-IgG titers significantly higher than those from cutaneous leishmaniasis patients. A group of 28 individuals selected amongst the 214 cutaneous leishmaniasis patients had their IF-titers (IgG and IgM) compared to those of the two control groups of healthy subjects from the endemic area, respectively with positive and negative MST. Significantly higher titers of IF-IgG and IF-IgM were found in the group with active disease. The same group of patients showed IF-IgG titers significantly lower at the end of the antimonial therapy than those observed during this tratment.

Poor and Sick: Estimating the relationship between Household Income and Health

This study evaluates the effect of the individual‘s household income on their health at the later stages of working life. A structural equation model is utilised in order to derive a composite and continuous index of the latent health status from qualitative health status indicators. The endogenous relationship between health status and household income status is taken into account by using IV estimators. The findings reveal a significant effect of individual household income on health before and after endogeneity is taken into account and after a host of other factors which is known to influence health, including hereditary factors and the individual‘s locus of control. Importantly, it is also shown that the childhood socioeconomic position of the individual has long lasting effects on health as it appears to play a significant role in determining health during the later stages of working life.