Induction of triploidy in large yellow crocker Pseudosciaena crocea (Richardson, 1846): effects of pressure shocks and growth performance in the first rearing year

The precociously sexual maturation in large yellow crocker Pseudosciaena crocea has become a serious problem. In an attempt to solve this problem, the production of sterile triploids could be an effective strategy. In this study, triploid P. crocea was obtained by subjecting fertilized eggs to pressure shock. Flow-cytometry analysis was used to assess ploidy level. In terms of triploid rate and hatching rate, the optimal conditions of pressure shock for triploidy induction in P. crocea were 7500 psi for 3 min shock at 3 min after fertilization at 20 degrees C. With the application of these parameters, 100% triploid fish were produced. During the first rearing year, triploid P. crocea had a similar growth performance compared with its diploid counterpart before the age of 8 months and showed a significant advantage at the age of 10 and 12 months in body weight and body length (P < 0.05). At the age of 12 months, the carcass weight of triploids was markedly higher than that of diploid control, and gonadal somatic index was significantly lower than that of their diploid control. During the first rearing year, survival in triploid group was 76.44%, inferior to its diploid control (83.21%).

Growth, survival and immune activity of scallops, Chlamys farreri Jones et Preston, compared between suspended and bottom culture in Haizhou Bay, China

We examined the growth, survival and immune response of the scallop, Chlamys farreri, during a 1-year period in deep water of Haizhou Bay. Scallops were cultured using two methods: (1) in lantern nets at a 5 m depth and (2) in a bottom culture system (sleeves) on the seabed at about a 25 m depth. Shell heights, meat dry weight and immune activities in the haemolymph (superoxide dismutase and myeloperoxidase) were measured bimonthly or quarterly from July 2007 to June 2008. Survival was measured at the end of the study and environmental parameters in the experimental layers were monitored during the experiment. The growth and immune activities of scallops were lower when the water temperature was high, which was consistent with the main mortality occurring in summer. The growth and immunity of scallops were higher in the suspended culture than in the bottom culture during the experiment, with the exception of shell growth during the last study period. Survival of scallops in the suspended culture (54.6 +/- 12.3%) was significantly lower than that in the bottom culture (86.8 +/- 3.5%) at the end of this study. We conclude from our results that the high mortality of C. farreri can be prevented by culturing them in a bottom culture system before November of the first year, and then transferring them to a suspended culture to improve scallop production.

Survival, growth and immune activity of scallop Chlamys farreri cultured at different depths in Haizhou Bay (Yellow Sea, China) during hot season

Survival, growth and immune response of the scallop, Chlamys farreri, cultured in lantern nets at five different depths (2, 5, 10, 15, and 20 m below the sea surface) were studied in Haizhou Bay during the hot season (summer and autumn) of 2007. Survival and growth rates were quantified bimonthly. Immune activities in hemolymph (superoxide dismutase (SOD) and acid phosphatase (ACP)) were measured to evaluate the health of scallops at the end of the study. Environmental parameters at the five depths were also monitored during the experiment. Mortalities mainly occurred during summer. Survival of scallops suspended at 15 m (78.0%) and 20 m (86.7%) was significantly higher than at 2 m (62.9%), 5 m (60.8%) or 10 m (66.8%) at the end of the study. Mean shell height grew significantly faster at 10 m (205.0 mu m/d) and 20 m (236.9 mu m/d) than at 2, 5 or 15 m in summer (July 9 to September 1); however, shell growth rate at 20 m was significantly lower than at the other four depths in autumn (September 2 to November 6). In contrast to summer, scallops at 5 m grew faster (262.9 mu m/d) during autumn. The growth of soft tissue at different depths showed a similar trend to the shell. Growth rates of shell height and soft tissue were faster in autumn than in summer, with the exception of shell height at 20 m. SOD activity of scallops increased with depth, and ACP activity was significantly higher at 15 and 20 m than at other depths, which suggests that scallops were healthier near the bottom. Factors explaining the depth-related mortality and growth of scallops are also discussed. We conclude that the mass mortality of scallop, C. farreri, during summer can be prevented by moving the culture area to deeper water and yield can be maximized by suspending the scallops in deep water during summer and then transferring them to shallow water in autumn.

Multiscale modelling of dendrite growth during vacuum arc remelting

Vacuum Arc Remelting (VAR) is the accepted method for producing homogeneous, fine microstructures that are free of inclusions required for rotating grade applications. However, as ingot sizes are increasing INCONEL 718 becomes increasingly susceptible to defects such as freckles, tree rings, and white spots increases for large diameter billets. Therefore, predictive models of these defects are required to allow optimization of process parameters. In this paper, a multiscale and multi-physics model is presented to predict the development of microstructures in the VAR ingot during solidification. At the microscale, a combined stochastic nucleation approach and finite difference solution of the solute diffusion is applied in the semi-solid zone of the VAR ingot. The micromodel is coupled with a solution of the macroscale heat transfer, fluid flow and electromagnetism in the VAR process through the temperature, pressure and fluid flow fields. The main objective of this study is to achieve a better understanding of the formation of the defects in VAR by quantifying the influence of VAR processing parameters on grain nucleation and dendrite growth. In particular, the effect of different ingot growth velocities on the microstructure formation was investigated. It was found that reducing the velocity produces significantly more coarse grains.

Influence of process parameters on fluidised hot-melt granulation and tablet pressing of pharmaceutical powders

This study investigates the influence of process parameters on the fluidised hot melt granulation of lactose and PEG 6000, and the subsequent tablet pressing of the granules. Granulation experiments were performed to assess the effect of granulation time and binder content of the feed on the resulting granule properties such as mass mean granule size, size distribution, granule fracture stress, and granule porosity. These data were correlated using the granule growth regime model. It was found that the dominant granule growth mechanisms in this melt granulation system were nucleation followed by steady growth (PEG 10–20% w/w). However, with binder contents greater than 20% w/w, the granulation mechanism moved to the “over-wet massing” regime in which discrete granule formation could not be obtained. The granules produced in the melt fluidised bed process were subsequently pressed into tablets using an industrial tablet press. The physical properties of the tablets: fracture stress, disintegration time and friability were assessed using industry standards. These analyses indicated that particle size and binder content of the initial granules influenced the mechanical properties of the tablets. It was noted that a decrease in initial granule size resulted in an increase in the fracture stress of the tablets formed.

Kinetic Monte Carlo study of electrochemical growth in a heteroepitaxial system

Structural and kinetic aspects of 2-D irreversible metal deposition under potentiostatic conditions are analyzed by means of dynamic Monte Carlo simulations employing embedded atom potentials for a model system. Three limiting models, all considering adatom diffusion, were employed to describe adatom deposition. The first model (A) considers adatom deposition on any free substrate site on the surface at the same rate. The second model (B) considers adatom deposition only on substrate sites which exhibit no neighboring sites occupied by adatoms. The third model (C) allows deposition at higher rates on sites presenting neighboring sites occupied by adatoms. Under the proper conditions, the coverage (theta) versus time (t) relationship for the three cases can be heuristically fitted to the functional form theta = 1 - exp(-betat(alpha)), where alpha and beta are parameters. We suggest that the value of the parameter alpha can be employed to distinguish experimentally between the three cases. While model A trivially delivers a = 1, models B and C are characterized by alpha 1, respectively.

A DFT study of the chain growth probability in Fischer-Tropsch synthesis

The chain growth probability (alpha value) is one of the most significant parameters in Fischer-Tropsch (FT) synthesis. To gain insight into the chain growth probability, we systematically studied the hydrogenation and C-C coupling reactions with different chain lengths on the stepped Co(0001) surface using density functional theory calculations. Our findings elucidate the relationship between the barriers of these elementary reactions and the chain length. Moreover, we derived a general expression of the chain growth probability and investigated the behavior of the alpha value observed experimentally. The high methane yield results from the lower chain growth rate for C-1 + C-1 coupling compared with the other coupling reactions. After C-1, the deviation of product distribution in FT synthesis from the Anderson-Schulz-Flory distribution is due to the chain length-dependent paraffin/olefin ratio. (C) 2008 Elsevier Inc. All rights reserved.

Nucleation and growth in fluidised hot melt granulation

Fluidised hot melt granulation (FHMG) is a novel technology for granulation process in pharmaceutical industry, which has distinct advantages over other commercial techniques. The aim of this research was to investigate granulation and the effect of process parameters that may affect FHMG process. In this work, ballotini beads were used as the model particles and Lutrol (R) F 68 Poloxamer 188 was used as meltable solid binder. In order to determine the granulation and nucleation mechanism in this co-melt FHMG system, several parameters were investigated, such as binder content, particle size of binder and particle size and hydrophobicity of ballotini. These parameters were correlated to granule size distribution, mean granule size and granule shape. Furthermore, these experimental investigations were designed so that the coalescence model could be applied to the co-melt FHMG system. The analysis indicated that the non-inertial regime extends over a relatively short time period of

How community ecology links natural mortality, growth, and production of fish populations

Size-spectrum theory is used to show that (i) predation mortality is a decreasing function of individual size and proportional to the consumption rate of predators; (ii) adult natural mortality M is proportional to the von Bertalanffy growth constant K; and (iii) productivity rate P/B is proportional to the asymptotic weight W8 -1/3. The constants of proportionality are specified using individual level parameters related to physiology or prey encounter. The derivations demonstrate how traditional fisheries theory can be connected to community ecology. Implications for the use of models for ecosystem-based fisheries management are discussed.

The effect of the binder size and viscosity on agglomerate growth in fluidised hot melt granulation

Fluidised hot melt granulation (FHMG) is a novel granulation technique for processing pharmaceutical powders. Several process and formulation parameters have been shown to significantly influence granulation characteristics within FHMG. In this study we have investigated the effect of the binder properties (binder particle size and binder viscosity) on agglomerate growth mechanisms within FHMG. Low-melting point co-polymers of polyoxyethylene–polyoxypropylene (Lutrol® F68 Poloxamer 188 and Lutrol® F127 Poloxamer 407) were used as meltable binders for FHMG, while standard ballotini beads were used as model fillers for this process. Standard sieve analysis was used to determine the size distribution of granules whereas we utilised fluorescence microscopy to investigate the distribution of binder within granules. This provided further insight into the growth mechanisms during FHMG. Binder particle size and viscosity were found to affect the onset time of granulation. Agglomerate growth achieved equilibrium within short time-scales and was shown to proceed by two competing processes, breakage of formed granules and re-agglomeration of fractured granules. Breakage was affected by the initial material properties (binder size and viscosity). When using binder with a small particle size (<250 µm), agglomerate growth via a distribution mechanism dominated. Increasing the binder particle size shifted the granulation mechanism such that agglomerates were formed predominantly via immersion. A critical ratio between binder diameter and filler has been calculated and this value may be useful for predicting or controlling granulation growth processes.

Growth of SrS thin films by pulsed-laser deposition

High-quality luminescent thin films of strontium sulphide (SrS) with excellent stoichiometry have been grown by pulsed-laser deposition. The crystallinity, stoichiometry and cathodoluminescence (CL) have been investigated for the films deposited onto two differently coated glass substrates. Furthermore the importance of post-deposition annealing has been studied. SrS thin films grown at 450 degrees C onto glass substrates coated with tin-doped indium oxide show good crystallinity, with a preferred orientation along the (200) axis. Cerium-doped SrS (SrS:Ce) gives a strong blue CL output at 400 nm. Energy-dispersive X-ray spectroscopy shows that the films are stoichiometric and that the stoichiometry is controllable by varying deposition parameters.

Postweaning exposure to aflatoxin results in impaired child growth: A longitudinal study in Benin, west Africa

Aflatoxins are dietary contaminants that are hepatocarcinogenic and immunotoxic and cause growth retardation in animals, but there is little evidence concerning the latter two parameters in exposed human populations. Aflatoxin exposure of West African children is known to be high, so we conducted a longitudinal study over an 8-month period in Benin to assess the effects of exposure on growth. Two hundred children 16-37 months of age were recruited from four villages, two with high and two with low aflatoxin exposure (50 children per village). Serum aflatoxin-albumin (AF-alb) adducts, anthropometric parameters, information on food consumption, and various demographic data were measured at recruitment (February) and at two subsequent time points (June and October). Plasma levels of vitamin A and zinc were also measured. AF-alb adducts increased markedly between February and October in three of the four villages, with the largest increases in the villages with higher exposures. Children who were fully weaned at recruitment had higher AF-alb than did those still partially breast-fed (p < 0.0001); the major weaning food was a maize-based porridge. There was no association between AF-alb and micronutrient levels, suggesting that aflatoxin exposure was not accompanied by a general nutritional deficiency. There was, however, a strong negative correlation (p < 0.0001) between AF-alb and height increase over the 8-month follow-up after adjustment for age, sex, height at recruitment, socioeconomic status, village, and weaning status; the highest quartile of AF-alb was associated with a mean 1.7 cm reduction in growth over 8 months compared with the lowest quartile. This study emphasizes the association between aflatoxin and stunting, although the underlying mechanisms remain unclear. Aflatoxin exposure during the weaning period may be critical in terms of adverse health effects in West African children, and intervention measures to reduce exposure merit investigation.

Single crystal CVD diamond growth strategy by the use of a 3D geometrical model: Growth on (113) oriented substrates

The quality of single crystal diamond obtained by microwave CVD processes has been drastically improved in the last 5 years thanks to surface pretreatment of the substrates [A. Tallaire, J. Achard, F. Silva, R.S. Sussmann, A. Gicquel, E. Rzepka, Physica Status Solidi (A) 201, 2419-2424 (2004); G. Bogdan, M. Nesladek, J. D'Haen, J. Maes, V.V. Moshchalkov, K. Haenen, M. D'Olieslaeger, Physica Status Solidi (A) 202, 2066-2072 (2005); M. Yamamoto, T. Teraji, T. Ito, Journal of Crystal Growth 285, 130-136 (2005)]. Additionally, recent results have unambiguously shown the occurrence of (110) faces on crystal edges and (113) faces on crystal corners [F. Silva, J. Achard, X. Bonnin, A. Michau, A. Tallaire, O. Brinza, A. Gicquel, Physica Status Solidi (A) 203, 3049-3055 (2006)]. We have developed a 3D geometrical growth model to account for the final crystal morphology. The basic parameters of this growth model are the relative displacement speeds of (111), (110) and (113) faces normalized to that of the (100) faces, respectively alpha, beta, and gamma. This model predicts both the final equilibrium shape of the crystal (i.e. after infinite growth time) and the crystal morphology as a function of alpha, beta, gamma, and deposition time.

An optimized operating point, deduced from the model, has been validated experimentally by measuring the growth rate in (100), (111), (110), and (113) orientations. Furthermore, the evolution of alpha, beta, gamma as a function of methane concentration in the gas discharge has been established. From these results, crystal growth strategies can be proposed in order, for example, to enlarge the deposition area. In particular, we will show, using the growth model, that the only possibility to significantly increase the deposition area is, for our growth conditions, to use a (113) oriented substrate. A comparison between the grown crystal and the model results will be discussed and characterizations of the grown film (Photoluminescence spectroscopy, EPR, SEM) will be presented. (C) 2008 Elsevier B.V. All rights reserved.

Growth hormone (GH) responsiveness to GHRH in normal adults is not affected by short-term gonadal blockade

The effects of changes in circulating gonadal steroids on GH secretion elicited by GHRH challenge (1µg/kg) in normal adults volunteers (aged 18-24 years), were evaluated in 10 women and 10 men before and after gonadal blockade was achieved by a GnRH agonist (1500 µg/day by nasal spray for 40 days). To see if the effect of testosterone on GH secretion was dependent on its aromatization to estradiol (E), GHRH tests were performed in 7 normal men prior to administration of testosterone enanthate (250 mg im), 8 days after this treatment had began, and again after E receptor blockade with tamoxifen (30 mg for 2 days plus 10 mg on the third day 2 h before the GHRH test, po) administered 8 days after testosterone enanthate. The study of the functional status of the somatotropes at the time of GHRH testing was made according to our previous postulate. Short-term gonadal blockade did not affect the parameters of GH response to GHRH in neither women nor men. Thus, the functional blockade of the gonads may be advisable as an adjunct therapy in the treatment of hypothalamic GH deficiency during the prepubertal stage. In the other group of men, administration of testosterone enanthate significantly increased GHRH-elicited GH release, but this was reverted after E receptor blockade. Since the hypothalamic-somatotrope rhythm was altered by both these farmacological manipulations, it appears that testosterone acts on GH release mainly at the suprapituitary level, and that this action is secondary to its aromatization to E.

The role of sexual steroids in the modulation of growth hormone (GH) secretion in humans

Sex steroids contribute to modulate GH secretion in man. However, both the exact locus and mechanism by which their actions are exerted still remain not clearly understood. We undertook a number of studies designed to ascertain: (1) whether or not sudden or chronic changes in circulating gonadal steroids may affect GH secretion in normal adults; and (2) the reason(s) for gender-related dimorphic pattern of GH release. The pituitary reserve of GH, as evaluated by means of a GHRH challenge, was similar in women with anorexia nervosa and in normally menstruating women. Estrogenic receptor blockade with tamoxifen (TMX) did not significantly change GHRH-induced GH response in these normal women. Therefore, acute or chronic hypoestrogenism apparently had no important effects at level of somatotrophs. In another group of normal women we tested the possibility that changes in circulating estrogens might induce changes in the hypothalamic-somatotroph rhythm (HSR). GHRH challenges were performed throughout a menstrual cycle, and again after having achieved functional ovarian blockade with a GnRH agonist treatment. Short-term ovarian blockade did not significantly affect the parameters of GH response to GHRH, although it was accompanied by an increase in the number of women ina refractory HSR phase at testing. This suggested a low potentiating effect on the basic pattern of somatostatin (SS) release occurring as a consequence of the decrease in circulating estrogens. In normal men, neither the GH response to GHRH nor the HSR were affected by functional testicular blockade (after GnRH agonist treatment). However, the administration of testosterone enanthate (250 mg) to another group of men increased both the GHRH-induced GH release and the number of subjects in a spontaneous secretory HSR phase at testing; these were reversed by estrogenic receptor blockade with TMS. In another group of normal men, the fraction of GH secreted in pulses (FGHP) during a nocturnal sampling period was significantly decreased by testicular blockade. Other parameters of GH secretion, such as the number of GH pulses and their mean amplitude (A), and the mean plasma GH concentration (MCGH), showed a slight, although not significant, decrease following the lack of androgens. The administration of testosterone enanthate (500 mg) reversed these parameters to values similar to those in the basal study. Interestingly, when tamoxifen was given after testosterone enanthate, A, MCGH and FGHP increased to values significantly higher than in any other experimental condition in that study. In all, these data suggest that 17ß-estradiol may participate in GH modulation by inhibiting the hypothalamic release of somatostatin, while testosterone stimulates it. The results obtained after estrogenic receptor blockade appear to indicate that the effect of testosterone in such a modulation is dependent on its aromatization to 17ß-estradiol. The differential levels of this steroid in both sexes might account for the sexual dimorphic pattern of GH secretion. From other data in the literature, obtained in rats, and our preliminary data in children with constitutional delay of growth and puberty, it is tempting to speculate that the effect of 17ß-estradiol may be exerted by modifying the functional activity of a-2 adrenergic pathways involved in the negative modulation of SS release.