Structural characterization of undoped and Sb-doped SnO2 thin films fired at different temperatures

SnO2 thin films were obtained by the sol-gel method starting from inorganic precursor solutions. In this work, we compare the structure of undoped and Sb-doped SnO2 films prepared by dip-coating. The films were deposited on quartz substrates and then fired at different temperatures ranging from 383 up to 1173 K. The density and the thickness of the films were determined by X-ray reflectivity (XRR) and their porous nanostructure was characterized by grazing-incidence small angle X-ray scattering (GISAXS). XRR results corresponding to undoped and Sb-doped samples indicate a monotonous decrease in film thickness when they are fired at increasing temperatures. At same time, the apparent density of undoped samples exhibits a progressive increase while for Sb-doped films it remains invariant up to 973 K and then increases for T = 1173 K. Anisotropic GISAXS patterns of both films, Sb-doped and undoped, fired above 573 K indicate the presence of elongated pores with their major axis perpendicular to the film surface. For all firing temperatures the nanopores in doped samples are larger than in undoped ones. This suggests that Sb-doping favours the pore growth hindering the film densification. At the highest firing temperature (1173 K) this effect is reversed.

Study of seed-germination and etiolation of seedlings in Emilia-sonchifolia (l) dc and Emilia-fosgerbii nicolson (Asteraceae)

The germination of seeds of Emilia sonchifolia (2n) and E. fosgerbii (4n) was analysed and our results indicate that the former present light insensitive seeds and the latter germinated only under continuous white light. The germination of seeds under shade light presented no differences between both species, However under continuous white light, which maintain 70% of Pfr, the velocity of germination was greater in Emilia sonchifolia when compared to Emilia fosbergii, indicating that the threshold of 4n seeds were greater than 2n seeds. The analysis of the fluence response curves for etiolating process indicated that the process presented no differences between both species. The same was observed for the effect of the shade light in the etiolating process.

Seed dispersal and germination of Cryptocarya moschata Nees & Martius Ex Nees, Ocotea catharinensis Mez and Endlicheria paniculata (Sprengel) Macbride (Lauraceae)

Data of seed dispersal and germination of the studied species are presented, comparing both observations from the wild and nursery. Fruits were collected from Carlos Botelho State Park (24 degrees 44' to 24 degrees 03'S, 47 degrees 46' to 48 degrees 10'W), south of São Paulo State, Brazil. O. catharinensis had low germination percentage, both in the wild and in nursery, and did not tolerate seed storage at low temperature. In nursery, diaspores with removed mesocarp of E. paniculata presented greater germination than those in entire fruits. The high levels of seedling mortality beneath mother-trees of C. moschata, when in comparison to those observed to established seedlings from diaspores dispersed by muriquis (Brachyteles arachnoides E. Geoffroy 1806, Cebidae, Primates), allied to the absence of juveniles in the understory, are in accord with the escape model of Janzen-Connel. In nursery, diaspores of C. moschata dispersed by the primates had greater germination, in smaller time, than those collected from mother-trees.

Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures

Statement of problem. Titanium has physical and mechanical properties, which have led to its increased use in dental prostheses despite casting difficulties due to high melting point and formation of oxide layers which affect the metal-ceramic bond strength.Purpose. This in vitro study evaluated the shear bond strength of the interface of 2 dental porcelains and pure titanium injected into a mold at 3 different temperatures.Material and methods. Using commercially pure (cp) titanium bars (Titanium, Grade I) melted at 1668degreesC and cast at mold temperatures of 430degreesC, 700degreesC or 900degreesC, 60 specimens were machined to 4 x 4 mm, with a base of 5 x 1 mm. The 4-mm surfaces were airborne-particle abraded with 100 mum aluminum oxide before applying and firing the bonding agent and evaluating the 2 porcelains (Triceram/Triline ti and Vita Titankeramik). Ten specimens were prepared for each temperature and porcelain combination Shear bond testing was performed in a universal testing machine, with a 500-kg load cell and crosshead speed of 0.5 mm/min. The specimens were loaded until failure. The interfaces of representative fractured specimens of each temperature were examined with a scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Data for shear bond strength (MPa) were statistically analyzed by 2-way ANOVA and the Tukey test (alpha = .05).Results. The results showed significant differences for the metal/porcelain interaction effect (P = .0464). There were no significant differences for the 2 porcelains (P = .4250). The Tukey test showed a significant difference between the pair cp Ti 430degreesC Triceram and cp Ti 900degreesC Triceram, with respective mean values and SDs of 59.74 +/- 11.62 and 34.03 +/- 10.35 MPa.Conclusion. Triceram porcelain showed a bond strength decrease with an increase in the mold temperature for casting titanium. The highest bond strength for Vita porcelain and the best metal-ceramic interface observed with the SEM were found with the mold temperature of 700degreesC.

Rheological properties of frozen concentrated orange juice (FCOJ) as a function of concentration and subzero temperatures

Data on flow properties of Frozen Concentrated Orange Juice (FCOJ) produced from oranges cv. Pera-Rio (65.04 Brix, 8.8% w/w pulp content, 2.5% w/w pectin, 3.84% citric acid, 1.293 g cm(-3)) from -18 to 0 degrees C were fitted with appropriate predictive models. The power law model was found to be the most appropriate to fit the flow curves obtained for FCOJ between 46.56 and 65.04 degrees Brix. In higher concentrations, thixotropy was observed and showed more temperature dependence. A single equation combining Arrhenius and exponential relationships was applied to describe the temperature effect and shear rate on the quantity of breakdown of FCOJ.

GROWTH AND FERMENTATION CHARACTERISTICS OF NEW SELECTED STRAINS OF SACCHAROMYCES AT HIGH-TEMPERATURES AND HIGH CELL DENSITIES

Maintenance of high cell viability was the main characteristic of our new strains of thermotolerant Saccharomyces. Total sugar conversion to ethanol was observed for sugarcane juice fermentation at 38-40-degrees-C in less than 10 h and without continuous aeration of the culture. Invertase activity differed among the selected strains and increased during fermentation but was not dependent on cell viability. Invertase activity of the cells and optimum temperature for growth, as well as velocity of ethanol formation, were dependent on medium composition and the type of strain used. At high sugarcane syrup concentrations, the best temperature for ethanol formation by strain 781 was 35-degrees-C. Distinct differences among the velocities of ethanol production using selected strains were also observed in sugarcane syrup at 35-38-degrees-C.

Structural electrical and optical properties of undoped and indium doped ZnO thin films prepared by the pyrosol process at different temperatures

The influence of the substrate temperature on the structural features and opto-electrical properties of undoped and indium-doped ZnO thin films deposited by pyrosol process was investigated. The addition of indium induces a drastic decrease (by a factor approximate to 10(10) for samples deposited at 300 degreesC) in the electrical resistivity of films, the lowest electrical resistivity (6 mOmega-cm) being observed for the film deposited at 450 degreesC. Films are highly transparent (>80%) in the Vis-NIR ranges, and the optical band gap exhibits a blue shift (from 3.29 to 3.33 eV) for the In-doped films deposited at increasing temperature. Preferential orientation of the ZnO crystallites with the c-axis perpendicular to the substrate surface and an anisotropic morphology of the nanoporous structure was observed for films growth at 300 and 350 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Effect of fruit maturation stage and light on seed germination of Aiphanes aculeata

Despite their spiny nature, Aiphanes palms are popular as ornamentals. They can be grown in various soil conditions, but achieve fast, luxuriant growth in sheltered positions with plenty of water. Shaded conditions are the best when plants are young. The objective of this study was to evaluate the effect of fruit maturation stage and light on the germination of seeds of A. aculeata. Fruits were collected at three different maturation stages: (1) yellow, (2) red, (3) collected on the ground without the fleshy mesocarp (removed by birds and insects). The fleshy mesocarp was also removed in treatments (1) and (2). All fruits were then treated with thiram and 25 seeds per plot were seeded in trays full of sand. The treatments (2) and (3) were subdivided in two other treatments: (a) 12 h photoperiod, (b) continuous darkness. The temperature was maintained at 30 degrees C. Seed germination began 34 days after sowing. After 160 days, the final germination percentage was (1) 54,67%, (2a) 61,33%, (2b) 65,33%, (3a) 38,00% and (3b) 45,33%. The best treatment was (2) independently of the light conditions.

Weed seed-germination .3. bidens-pilosa L

The germination of seeds of Bidens pilosa L. colected at different places was analyzed by dose-response curves for induction and reversion of germination in seeds pre-incubated at 25 degrees C or 36 degrees C during 24 hours. Our results indicate that phytochrome is responsible for the control of seed germination id Bidens pilosa and the level of pre-existing active form of phytochrome (Pfr) above the threshold switch the seed to germinate in darkness.

IN-VITRO INHIBITION OF SPORES GERMINATION OF ALTERNARIA-SOLANI BY 3 FUNGICIDES

In vitro inhibition of the of spores germination of Alternaria solani by iprodione, chlorothalonil, and anilazine at different dosages was studied. The highest concentration of active ingredient studied for each fungicide was equivalent to that recommended for the control of the early blight, under field conditions: 0.75; 1.80 and 1.44 g, respectively, of iprodione, chlorothalonil and anilazine per litre of water. A series of two-fold diluitions of each original concentration was studied in additional nine experiments. Eah of the three fungicides showed total in vitro spore inhibition at the highest rate, at six hours of incubation. At nine hours, only analazine mantained its full inhibition activity. The inhibition activity of iprodione decreased suddenly after 1/2 dilution, so that at the 1/8 dilution a total loss of inhibitory activity was observed. Chlorothalonil showed a progressive and slighter decrease of its activity as the dilution rate increased.Analizine showed a high inhibitory activity at higher dilutions, without any loss up to 1/128 dilution. Even at 1/512 dilution, its activity was so high that only 20% of spore germination was observed at six or nine hours of incubation.

Analysis of seed-germination in Piptadenia-Gonoacantha (Mart) MACBR (Leguminosae Mimosoideae)

Preliminary tests indicated 20-degrees-25-degrees-C as optimum temperature range to the germination of the seeds of P. gonoacantha. Seeds germinate both under light and dark conditions, although final percentage is always higher in latest condition. The transmission spectrum of the tegument was investigated and showed an enrichment of the light in far-red region which reaches the embryo. Consequently the white light inhibits partially germination. Another factor controlling germination was the water availability. Our results indicated that the excessive water available during imbibition inhibits the germination process. According to our results we propose that this species do not have a pioneer behavior and even though P. gonoacantha had been described as a riparian vegetation species, the germination process is strongly inhibited with excessive water during imbiibition process.

A SAXS study of kinetics of aggregation of TEOS-derived sonogels at different temperatures

The kinetics of aggregation of tetraethoxysilane (TEOS)-derived silica sols, produced by acid-catalyzed and ultrasound-stimulated hydrolysis, were studied by 'in situ' measurements of small-angle X-ray scattering (SAXS) at the temperatures 40 degreesC, 60 degreesC and 70 degreesC. The results were analyzed in terms of the evolution with time (t) of the SAXS intensity probing the mass fractal characteristics of the system, the average radius of gyration (Rc,) of the clusters and the number of primary particles per cluster. The aggregation process yields mass fractal structures which exhibit a scattering exponent (alpha) practically equal to 2, in the probed length scale range (5.3 nm < 1/q < 0.22 nm), beneath and even far beyond the gel point. This suggests that a is a direct measure of the real mass fractal dimension (D) of the structure. The precursor sol (pH = 2) exhibits I nm mean sized clusters with mass fractal dimension D similar to 1.9. Increasing the pH to 4.5, the cluster mean size and the number of primary particles per cluster increase but the system keeps a more opened structure (D similar to 1.4). In the first aggregation stages, D increases up to similar to2 by incorporating primary particles to the clusters without changing their mean size. From this stage, the aggregation progresses following a thermally activated scaling law well described by R-G similar tot(1/D) in all cases. This is indicative of a diffusion-controlled cluster-cluster aggregation process. The activation energy of the process was found to be 91.7 kJ/mol. (C) 2001 Elsevier B.V. B.V. All rights reserved.