Estudo técnico-económico de um sistema solar termoelétrico com back-up a biomassa

Este trabalho consistiu no estudo técnico-económico (dimensionamento) de uma central térmica solar de torre norte, com back-up a biomassa (pellets) para produção de energia elétrica. A partir da plataforma PVGIS obteve-se a irradiação normal direta, DNI, da região do Alentejo, Portugal, segundo critérios descritos na secção 3.1. O valor anual obtido foi de 2319 !"ℎ/%&, valor este que foi convertido em energia elétrica, obtendo-se, assim, um montante de 105.761.800 kWh por ano, em 25 anos. Estas importâncias foram obtidas através dos equipamentos que constituem a central, entre eles o campo solar (composto por 2067 helióstatos com área total de 188097 %&), a torre (convertendo a concentração da DNI para energia térmica ao fluído de transferência de calor, HTF), o bloco de potência (composta por permutador de calor, turbina, gerador elétrico e outros) e com ajuda de uma caldeira a biomassa (pellets) que consome cerca de 24.001,23 toneladas de pellets por ano. O estudo económico foi realizado num modelo executável no Excel, calculando, assim, o custo total do sistema, 138.515.886,87 €. A partir deste valor calcularam-se os indicadores económicos (Valor Atualizado Líquido, VAL=-12.282540,28 €) com uma tarifa bonificada de 0,22114 €/kWh, que indica que o sistema termo solar com back-up a biomassa (pellets) não é viável economicamente (e o mesmo acontece com o sistema termo solar sem a biomassa). O dimensionamento técnico do sistema CSP de torre é feito a partir de um modelo matemático executado em Excel e MatLab e pelo software System Advisor Model, SAM e o da caldeira a pellets é concretizado também no Excel. Os resultados do modelo matemático foram comparados com os valores obtidos no SAM para o mês típico de julho comprovando, assim, as fórmulas e conceitos contidos no estado da arte. Realizou-se, também, uma comparação dos valores anuais do sistema obtidos no SAM com os valores reais da Gemasolar (em Espanha), demonstrando então a veracidade dos valores obtidos no dimensionamento feito para Portugal.

Toxoplasma gondii seropositivity and risk factors in pregnant women followed up by the Family Health Strategy

INTRODUCTION : Toxoplasmosis is a zoonotic infection caused by Toxoplasma gondii. It is transmitted by the ingestion of contaminated water and foods, by soil contaminated with cat feces, especially while handling it, and congenitally via the placenta. The diagnosis of maternal infection is made by serological detection of either IgM or IgG antibodies. This study assessed the seropositivity in pregnant women followed up by the Family Health Strategy (FHS) in Lages, Santa Catarina, Brazil. METHODS: The study was performed in 19 FHS units and included 148 childbearing women. The outcomes evaluated were IgM and IgG seropositivity and behavioral variables. RESULTS: IgG yielded positive results in 16% of the pregnant women, whereas IgM was positive in only 1%. CONCLUSIONS: The 1% IgM positivity rate for T. gondii indicates congenital toxoplasmosis is not common in Lages.

Long-term follow-up of a patient since the acute phase of Chagas disease (South American trypanosomiasis): further treatment and cure of the infection

ABSTRACTA woman had been followed since 1957 for acute phase Chagas disease. Parasitological and serological tests were positive, and treatment included benznidazole in 1974. Following treatment, parasitological test results were negative and conventional serology remained positive until 1994, with subsequent discordant results (1995-1997). The results became consistently negative since 1999. She had an indeterminate chronic form until 1974. Only two minor and transitory nonspecific alterations on electrocardiogram were noted, with the last nine records normal until June 2014. This case confirms the possibility of curing chronic disease and suggests the benefit of specific treatments for preventing long-term morbidity.

Risk-benefit assessment of Bacillus Calmette-Guérin vaccination, anti-phenolic glycolipid I serology, and Mitsuda test response: 10-year follow-up of household contacts of leprosy patients

Abstract: INTRODUCTION: Despite multidrug therapy, leprosy remains a public health issue. The intradermal Bacillus Calmette-Guérin (BCG) vaccine, Mitsuda test (lepromin skin test), and anti-phenolic glycolipid I (PGL-I) serology are widely used in leprosy studies and have shown great epidemiological value. METHODS: This longitudinal study evaluated the relative risks and benefits of these three tools by comparing results observed in household contacts (HHCs) of leprosy patients who developed leprosy with those of HHCs who did not in a population of 2,992 individuals monitored during a 10-year period. RESULTS : Seventy-five (2.5%) new leprosy cases were diagnosed, including 28 (0.9%) co-prevalent cases. Therefore, for the risk-benefit assessment, 47 (1.6%) HHCs were considered as truly diagnosed during follow-up. The comparison between healthy and affected contacts demonstrated that not only did BCG vaccination increase protection, but boosters also increased to 95% relative risk (RR) reduction when results for having two or more scars were compared with having no scars [RR, 0.0459; 95% confidence interval (CI), 0.006-0.338]. Similarly, Mitsuda reactions >7mm in induration presented 7-fold greater protection against disease development compared to reactions of 0-3mm (RR, 0.1446; 95% CI, 0.0566-0.3696). In contrast, anti-PGL-I ELISA seropositivity indicated a 5-fold RR increase for disease outcome (RR, 5.688; 95% CI, 3.2412-9.9824). The combined effect of no BCG scars, Mitsuda reaction of <7mm, and seropositivity to anti-PGL-I increased the risk for leprosy onset 8-fold (RR, 8.109; 95% CI, 5.1167-12.8511). CONCLUSIONS: The adoption of these combined assays may impose measures for leprosy control strategies.

Nutritional follow-up of critically ill infants receiving short term parenteral nutrition

Few studies have tried to characterize the efficacy of parenteral support of critically ill infants during short period of intensive care. We studied seventeen infants during five days of total parenteral hyperalimentation. Subsequently, according to the clinical conditions, the patients received nutritional support by parenteral, enteral route or both up to the 10th day. Evaluations were performed on the 1st, 5th, and 10th days. These included: clinical data (food intake and anthropometric measurements), haematological data (lymphocyte count), biochemical tests (albumin, transferrin, fibronectin, prealbumin, retinol-binding protein) and hormone assays (cortisol, insulin, glucagon). Anthropometric measurements revealed no significant difference between the first and second evaluations. Serum albumin and transferrin did not change significantly, but mean values of fibronectin (8.9 to 16 mg/dL), prealbumin (7.7 to 18 mg/dL), and retinol-binding protein (2.4 to 3.7 mg/dL) increased significantly (p < 0.05) from the 1st to the 10th day. The hormonal study showed no difference for insulin, glucagon, and cortisol when the three evaluations were compared. The mean value of the glucose/insulin ratio was of 25.7 in the 1st day and 15.5 in the 5th day, revealing a transitory supression of this hormone. Cortisol showed values above normal in the beginning of the study. We conclude that the anthropometric parameters were not useful due to the short time of the study; serum proteins, fibronectin, prealbumin, and retinol-binding protein were very sensitive indicators of nutritional status, and an elevated glucose/insulin ratio, associated with a slight tendency for increased cortisol levels suggest hypercatabolic state. The critically ill patient can benefit from an early metabolic support.

Persistent asthma in adults: comparison of high resolution computed tomography of the lungs after one year of follow-up

OBJECTIVE: The aims of this study were to evaluate the role of high resolution computed tomography of the torax in detecting abnormalities in chronic asthmatic patients and to determine the behavior of these lesions after at least one year. METHOD: Fourteen persistent asthmatic patients with a mean forced expiratory volume in 1-second that was 63% of predicted and a mean forced expiratory volume in 1-second /forced vital capacity of 60% had two high resolution computed tomographys separated by an interval of at least one year. RESULTS: All 14 patients had abnormalities on both scans. The most common abnormality was bronchial wall thickening, which was present in all patients on both computed tomographys. Bronchiectasis was suggested on the first computed tomography in 5 of the 14 (36%) patients, but on follow-up, the bronchial dilatation had disappeared in 2 and diminished in a third. Only one patient had any emphysematous changes; a minimal persistent area of paraseptal emphysema was present on both scans. In 3 patients, a "mosaic" appearance was observed on the first scan, and this persisted on the follow-up computed tomography. Two patients had persistent areas of mucoid impaction. In a third patient, mucus plugging was detected only on the second computed tomography. CONCLUSIONS: We conclude that there are many abnormalities on the high resolution computed tomography of patients with persistent asthma. Changes suggestive of bronchiectasis, namely bronchial dilatation, frequently resolve spontaneously. Therefore, the diagnosis of bronchiectasis by high resolution computed tomography in asthmatic patients must be made with caution, since bronchial dilatation can be reversible or can represent false dilatation. Nonsmoking chronic asthmatic subjects in this study had no evidence of centrilobular or panacinar emphysema.

Parosteal osteosarcoma with myocardial metastasis 13 years after follow-up

PURPOSE: To report the case of a woman with a diagnosis of grade II (low grade) parosteal osteosarcoma with the occurrence of myocardial metastasis 13 years after resection, and to present a review of the existing literature on the subject. METHODS: Description of the case and review of the literature. CONCLUSION: The review leads to the conclusion that the occurrence of metastasis from parosteal osteosarcoma can occur in up to 38% of the cases, in spite of its relatively low aggressiveness. However, myocardial metastasis of a parosteal osteosarcoma is an event that was not found in the literature.

Dura mater mitral and tricuspid bioprostheses: 30 years of follow-up

PURPOSE: The dura mater bioprosthesis was developed in the Department of Cardiopneumology of the Hospital das Clínicas of the University of São Paulo Medical School in 1971. Here, we present the clinical results of the dura mater bioprosthesis over 30 years of follow-up. METHODS: We studied 70 consecutive patients who underwent mitral or tricuspid valve replacement with a dura mater bioprosthesis between January 1971 and August 1972. RESULTS: The early mortality was 10% (7 patients). The follow-up was 87% complete (9 patients were lost to follow-up). Two patients were alive and asymptomatic 30 years after valve replacement; 33 patients underwent reoperations due to valve dysfunction, and 19 died during the follow-up period. At 30 years, the actuarial survival was 49.2 ± 8.6%; freedom from rupture, 27.0 ± 10.2%; freedom from calcification, 78.8 ± 8.6%; and freedom from reoperation, 18.8 ± 7.5%. CONCLUSIONS: The dura mater bioprosthesis played an important role in the treatment of patients with mitral and tricuspid valve disease. The low rate of thromboembolism and the long period of follow-up without evidence of valve dysfunction, which occurred for several of our patients, are important characteristics of these bioprosthesis.

O "Check-up" do conhecimento: aprender e avaliar

Relatório de estágio de mestrado em Educação Pré-Escolar e Ensino do 1.º do Ensino Básico

A GIS extension model to calculate urban heat island intensity based on urban geometry

This paper presents a simulation model, which was incorporated into a Geographic Information System (GIS), in order to calculate the maximum intensity of urban heat islands based on urban geometry data. The method-ology of this study stands on a theoretical-numerical basis (Okeâ s model), followed by the study and selection of existing GIS tools, the design of the calculation model, the incorporation of the resulting algorithm into the GIS platform and the application of the tool, developed as exemplification. The developed tool will help researchers to simulate UHI in different urban scenarios.

Engineering of fatty acid production and secretion in Saccharomyces cerevisiae

Tese de Doutoramento em Ciências - Especialidade em Biologia

Development of magnetoelectric CoFe2O4/poly(vinylidene fluoride) microspheres

Magnetoelectric microspheres based on piezoelectric poly(vinylidene fluoride) (PVDF) and magnetrostrictive CoFe2O4 (CFO), a novel morphology for polymer-based ME material, have been developed by an electrospray process. The CFO nanoparticles content in the (3-7 μm diameter) microspheres reaches values up to 27 wt.%, despite their concentration in the starting solution reaching values up to 70 wt.%. Additionally, the inclusion of magnetostrictive nanoparticles into the polymer spheres has no relevant effect on the piezoelectric β-phase content (≈60%), crystallinity (40%) and the onset degradation temperature (460º-465ºC) of the polymer matrix. The multiferroic microspeheres show a maximum piezoelectric reponse |d33|≈30 pC.N-1, leading to a magnetoelectric response of Δ|d33|≈5 pC.N-1 obtained when a 220 mT DC magnetic field was applied. It is also shown that the interface between CFO nanoparticles and PVDF (from 0 to 55%) has a strong influence on the ME response of the microspheres. The simplicity and the scalability of the processing method suggest a large application potential of this novel magnetoelectric geometry in areas such as tissue engineering, sensors and actuators.

Metallic glass/PVDF magnetoelectric energy harvester working up to the radiofrequency range

Companies and researchers involved in developing miniaturized electronic devices face the basic problem of the needed batteries size, finite life of time and environmental pollution caused by their final deposition. The current trends to overcome this situation point towards Energy Harvesting technology. These harvesters (or scavengers) store the energy from sources present in the ambient (as wind, solar, electromagnetic, etc) and are costless for us. Piezoelectric devices are the ones that show a higher power density, and materials as ceramic PZT or polymeric PVDF have already demonstrated their ability to act as such energy harvester elements. Combinations between piezoelectric and electromagnetic mechanism have been also extensively investigated. Nevertheless, the power generated by these combinations is limited under the application of small magnetic fields, reducing the performance of the energy harvester [1]. In the last years the appearance of magnetoelectric (ME) devices, in which the piezoelectric deformation is driven by the magnetostrictive element, enables to extract the energy of very small electromagnetic signals through the generated magnetoelectric voltage at the piezoelectric element. However, very little work has been done testing PVDF polymer as piezoelectric constituent of the ME energy harvester device, and only to be proposed as a possibility of application [2]. Among the advantages of using piezopolymers for vibrational energy harvesting we can remember that they are ductile, resilient to shock, deformable and lightweight. In this work we demonstrate the feasibility of using magnetostrictive Fe-rich magnetic amorphous alloys/piezoelectric PVDF sandwich-type laminated ME devices as energy harvesters. A very simple experimental set-up will show how these laminates can extract energy, in amounts of μW, from an external AC field.

Terahertz response of patterned epitaxial graphene

We study the interaction between polarized terahertz (THz) radiation and micro-structured large-area graphene in transmission geometry. In order to efficiently couple the radiation into the two-dimensional material, a lateral periodic patterning of a closed graphene sheet by intercalation doping into stripes is chosen. We observe unequal transmittance of the radiation polarized parallel and perpendicular to the stripes. The relative contrast, partly enhanced by Fabry-Perot oscillations reaches 20 %. The effect even increases up to 50 % when removing graphene stripes in analogy to a wire grid polarizer. The polarization dependence is analyzed in a large frequency range from < 80 GHz to 3 THz, including the plasmon-polariton resonance. The results are in excellent agreement with theoretical calculations based on the electronic energy spectrum of graphene and the electrodynamics of the patterned structure

Sustentabilidade no Design: uma abordagem aos resíduos limpos das indústrias do calçado

Dissertação de mestrado em Design e Marketing