907 resultados para feed prices


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of the present study was to assess the heat tolerance of animals of two Portuguese (Alentejana and Mertolenga) and two exotic (Frisian and Limousine) cattle breeds, through the monitoring of physiological acclimatization reactions in different thermal situations characterized by alternate periods of thermoneutrality and heat stress simulated in climatic chambers. In the experiment, six heifers of the Alentejana, Frisian and Mertolenga breeds and four heifers of the Limousine breed were used. The increase in chamber temperatures had different consequences on the animals of each breed. When submitted to heat stress, the Frisian animals developed high thermal polypnea (more than 105 breath movements per minute), which did not prevent an increase in the rectal temperature (from 38.7 degrees C to 40.0 degrees C). However, only a slight depression in food intake and in blood thyroid hormone concentrations was observed under thermal stressful conditions. Under the thermal stressful conditions, Limousine animals decreased food intake by 11.4% and blood triiodothyronine (T3) hormone concentration decreased to 76% of the level observed in thermoneutral conditions. Alentejana animals had similar reactions. The Mertolenga cattle exhibited the highest capacity for maintaining homeothermy: under heat stressful conditions, the mean thermal polypnea increased twofold, but mean rectal temperature did not increase. Mean food intake decreased by only 2% and mean T3 blood concentration was lowered to 85,6% of the concentration observed under thermoneutral conditions. These results lead to the conclusion that the Frisian animals had more difficulty in tolerating high temperatures, the Limousine and Alentejana ones had an intermediate difficulty, and the Mertolenga animals were by far the most heat tolerant.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The apparent digestibility coefficients (ADCs) of amino acids (AA), protein, and energy in six feed ingredients (Brazilian fish meal, soybean meal, corn gluten meal, alcoholic yeast, corn, and wheat bran) we evaluated for pacu juveniles. In general, all ingredients showed high digestibility values for all AA, and differences among ADCs of individual amino acid were detected (P < 0.01). Corn gluten, soybean, and fish meals had the highest ADCs of AA. The ADCs of protein in fish meal, yeast, and corn gluten meal should not be used as AA digestibility indicators, because those showed differences up to 6.7% between the ADCs of protein and AA. All ingredients had lower ADCs of energy than corn gluten meal (P < 0.01). Lysine was the first limiting amino acid in fish meal, corn gluten meal, wheat bran, and corn, and the second limiting amino acid in soybean meal, as methionine was the first limiting amino acid in soybean meal and yeast. However, the soybean meal was the best quality protein source, as it had the highest digestible essential amino acid index. This demonstrated that digestible amino acid values can be used to formulate practical diets for pacu, preventing potential deficiencies or excess that might cause environmental and economic losses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An accurate estimate of machining time is very important for predicting delivery time, manufacturing costs, and also to help production process planning. Most commercial CAM software systems estimate the machining time in milling operations simply by dividing the entire tool path length by the programmed feed rate. This time estimate differs drastically from the real process time because the feed rate is not always constant due to machine and computer numerical controlled (CNC) limitations. This study presents a practical mechanistic method for milling time estimation when machining free-form geometries. The method considers a variable called machine response time (MRT) which characterizes the real CNC machine's capacity to move in high feed rates in free-form geometries. MRT is a global performance feature which can be obtained for any type of CNC machine configuration by carrying out a simple test. For validating the methodology, a workpiece was used to generate NC programs for five different types of CNC machines. A practical industrial case study was also carried out to validate the method. The results indicated that MRT, and consequently, the real machining time, depends on the CNC machine's potential: furthermore, the greater MRT, the larger the difference between predicted milling time and real milling time. The proposed method achieved an error range from 0.3% to 12% of the real machining time, whereas the CAM estimation achieved from 211% to 1244% error. The MRT-based process is also suggested as an instrument for helping in machine tool benchmarking.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We tested the effects of monochromatic light on the specific growth rate (SGR), feed intake and feed efficiency (FE) of juvenile pikeperch, Sander lucioperca (L.). Pikeperch were reared individually for 42 days in aquaria covered with blue, green, yellow or red gelatin filters or white paper (control; n=5). Linear regression analysis indicated a significant positive effect of longer wavelengths of light on the condition factor (CF), FE and SGR. The final weight, SGR and CF were significantly higher in fish reared under red than under white light, and FE was better under green, yellow and red light than under white light (Dunnett's post hoc test, P < 0.05) while blue was comparable to white light in terms of the measured parameters. After the growth trial, the spectral sensitivity of photoreceptor cells in the retina was tested using microspectrophotometry, which revealed the presence of rods with lambda(max) at ca. 530 nm and two cone classes, absorbing maximally at ca. 535 and 603 nm, all containing a porphyropsin-based pigment. These results suggest that the presence of mid and long wavelength-sensitive cones enhances visual sensitivity under mid-wavelength and long-wavelength environments, and thus supports the finding that longer wavelengths of incoming light can improve FE and SGR of the cultivated pikeperch.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Castor (Ricinus communis L.) is one of the oldest cultivated crops, but currently it represents only 0.15% of the vegetable oil produced in the world. Castor oil is of continuing importance to the global specialty chemical industry because it is the only commercial source of a hydroxylated fatty acid. Castor also has tremendous future potential as an industrial oilseed crop because of its high seed oil content (more than 480 g kg(-1)), unique fatty acid composition (900 g kg(-1) of ricinoleic acid), potentially high oil yields (1250-2500 L ha(-1)), and ability to be grown under drought and saline conditions. The scientific literature on castor has been generated by a relatively small global community of researchers over the past century. Much of this work was published in dozens of languages in journals that are not easily accessible to the scientific community. This review was conducted to provide a compilation of the most relevant historic research information and define the tremendous future potential of castor. The article was prepared by a group of 22 scientists from 16 institutions and eight countries. Topics discussed in this review include: (i) germplasm, genetics, breeding, biotic stresses, genome sequencing, and biotechnology; (ii) agronomic production practices, diseases, and abiotic stresses; (iii) management and reduction of toxins for the use of castor meal as both an animal feed and an organic fertilizer; (iv) future industrial uses of castor including renewable fuels; (v) world production, consumption, and prices; and (vi) potential and challenges for increased castor production.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Based on behaviour of output growth and industrial sector prices, it tries to define the several stages comprising the cyclic trends of the Brazilian economy. Analyzes the behaviour of inflation rates and of relative prices, and shows that there is a positive association between the measures of inflation rates and of their variables as well as between both these measures and dispersion of relative price changes. Demonstrates the assymetric behaviour of relative price changes and differentiated behaviour in relative prices of farm produce and industrial products. -from Authors

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The experiment described evaluated the effect of a commercial in-feed preparation (Bio-Add™) involving a mixture of formic acid and propionic acid on the incidence of experimental fowl typhoid in groups of 41 and 42 1-wk-old Rhode Island Red chickens. The chickens were infected through contact with 12 identical chickens that had been inoculated orally with 10 8 cfu of Salmonella gallinarum strain 9. The incidence of mortality and morbidity due to fowl typhoid was 31/41 (76%) in birds given untreated feed and 14/42 (33%) in birds given feed treated with Bio-Add™.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We conducted a two-way selection experiment in a composite rabbit population to investigate the responses to selection for postweaning ADG and feed conversion (FC). Two generations of crossing, followed by four generations of random pair matings, preceded three generations of selection. Selection was practiced within four lines: high-feed conversion (HFC), low-feed conversion (LFC), high gain (HG), and low gain (LG). Data on 1,446 rabbits from the random mating and selection generations were fitted to an animal model to estimate heritabilities of and the genetic correlation between ADG and FC. The two-trait model included rabbit and common litter random effects and line, generation, and sex fixed effects. Estimates of heritability of ADG and FC were .48 and .29, respectively, and the genetic correlation between them was -.82. Common litter environmental effects accounted for a proportion of .11 and . 13 of the phenotypic variation of the two traits, respectively. For ADG (in g/d) the regressions of mean breeding values on generation number during the selection period were 1.23 ± .12 (P < .01) in the HG line and -.86 ± .12 (P < .01) in the LG line; the regressions for FC (in g feed/g gain) were -.07 ± .01 (P < .01) in the HFC line and .03 ± .01 (P < .05) in the LFC line. Selection for ADG was effective in improving ADG and FC.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study tested the hypothesis that high feed consumption will acutely decrease circulating progesterone concentrations. In the first experiment, a Latin Square design was used to test whether feeding pattern would alter circulating progesterone in pregnant lactating Holstein cows (n = 12). Feed was removed for 12 h before the experiment and cows were then either fed 100% of the total mixed ration (TMR), 50% of TMR every 12 h, 25% of TMR every 6 h, or left unfed for an additional 12 h. Blood samples were taken every hour for 24 h. Provision of 100 or 50% of TMR decreased circulating progesterone by 1 h after feeding and progesterone remained depressed until 8-9 h after feeding. Feeding 25% of TMR did not reduce circulating progesterone concentrations. Experiment 2 used a crossover design to measure the effect of acute feeding on circulating progesterone and LH concentrations during delivery of a constant amount of exogenous progesterone (Eazi-Breed CIDRs) in lactating Holstein cows (n = 8) and nonpregnant dry Holstein cows (n = 6). Blood samples were taken every 15 min for 8 h. There was no change in serum progesterone during the 8 h treatment period in unfed cows; however, feeding decreased (P < 0.05) circulating progesterone between 2 and 6 h after feeding. In lactating cows, feeding increased mean LH (P < 0.05). There were more LH pulses (P = 0.01) in lactating than nonlactating cows. Thus, acute feeding reduced circulating progesterone in pregnant lactating cows apparently due to an increase in progesterone metabolism. Interestingly, feeding multiple smaller meals eliminated the acute effect of feeding on circulating progesterone. © 2003 Published by Elsevier B.V.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study aimed to quantify the proportion of 13C from energy and protein feed ingredients that follow the metabolic routing of the liver and muscle in broiler chickens. A stable isotope of carbon technique was used that is based on the isotopic discrimination that occurs in the plants during the photosynthesis process. One-day-old male chicks were subjected to treatments based on free choice of energy and protein sources. Rice bran (R) and soybean meal (S), C3 plants, have higher isotopic ratios than corn (C), a C4 plant, and corn gluten meal (G). Choices were R+S, C+G, R+G, C+S, or R+C+G+S. A complete feed (CF) was a sixth treatment. Feed intake and BW were measured at 30 d of age, when liver and breast muscle were collected for isotopic analysis. Treatments affected the amount of feed intake and the choices of energy or protein sources. Complete feed had the largest intake, differing from the other treatments that had free-choice feeding. Final BW was a direct reflection of consumption by these birds in all treatments. The isotopic results indicated that the 13C/12C ratio was generally higher in breast muscle than in liver, probably because of higher protein content. Moreover, in the liver, the proportion of 13C retained from the energy ingredient was greater than the proportion from the protein ingredient. That is in contrast to muscle, where the proportion of 13C retained from the protein ingredient was greater than from the energy ingredient that was self-selected.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An experiment was carried out to evaluate different criteria in feed formulation based on digestible amino acids for broilers during the grower phase. Diets were formulated according to the recommendations for digestible methionine, methionine + cysteine, lysine, and threonine. A total number of six hundred Cobb 500 male day-old chicks were distributed in a completely randomized experimental design, with three formulation criteria supplying the recommendations established by Baker & Chung (1992), Degussa (1997), and Rostagno et al. (2000), with 4 replicates of 50 birds each. No significant differences were observed for weight gain and feed intake. However, feed conversion ratio improved when birds were fed the diets containing the profiles recommended by Baker & Chung (1992) and Degussa (1997). No difference was observed in terms of leg, wings, back, and head yields. Broilers fed with the profile of Baker & Chung (1992) presented worst breast yield, whereas those fed the Degussa (1997) standard had better carcass yield.