914 resultados para condition corporelle


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this article we introduce the concept of MP-pseudoinvexity for general nonlinear impulsive optimal control problems whose dynamics are specified by measure driven control equations. This is a general paradigm in that, both the absolutely continuous and singular components of the dynamics depend on both the state and the control variables. The key result consists in showing the sufficiency for optimality of the MP-pseudoinvexity. It is proved that, if this property holds, then every process satisfying the maximum principle is an optimal one. This result is obtained in the context of a proper solution concept that will be presented and discussed. © 2012 IEEE.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effects of nursing regimens on the body condition, onset of ovarian cyclicity postpartum and weaning weight of lambs were assessed in Santa Ines ewes. Thirty-two ewes were blocked according to parity, number of lambs, and body weight at lambing and within each block randomly allocated to treatments: continuous nursing (CN), controlled nursing (CN2) with two daily feedings for an hour after the 10th day postpartum, or early weaning (EW) with total separation from the lambs after the 10th day. The animals were evaluated from the 12th day postpartum until the first estrus or until 60th day. The dry matter and nutrients intake did not differ among treatments ( P>. 0.05) but did differ over time ( P<. 0.01). The weight, body condition score, serum concentrations of non-esterified fatty acids and prolactin, the percentages of ewes in estrus, of ewes that ovulated within 60th day and had ovulation silent, the period from lambing to estrus, ovulation and follicle with a diameter ≥5. mm and the maximum follicular diameter did not differ ( P>. 0.05) among the treatments. The percentage of ovulation until 30th day was greater ( P<. 0.05) in the EW group. The percentage of short luteal phases was higher in the CN2 and EW groups ( P=0.07) and normal luteal phases were higher in the CN group ( P=0.01). Lamb weight weaning was lower in the EW group ( P<. 0.05). It is possible to use CN to obtain lambing periods less than eight months in Santa Ines ewes, with the advantages of simpler management and higher lamb weaning weights. © 2013 Elsevier B.V.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Historically, the ichthyofauna of large Brazilian rivers has been subject to anthropogenic interference, such as impoundments. Currently, cage fish farming systems are a new source of impact on aquatic ecosystems. The objective of this study was to characterise the impact of freshwater fish farms on the feeding of five species of Neotropical freshwater fish. Specimens of Astyanax altiparanae, Galeocharax knerii, Iheringicthys labrosus, Pimelodus maculatus and Plagioscion squamosissimus were sampled in areas around two systems of cage fish farming (CF), and two control areas (CT) that were not influenced by this activity. Results show that there were significant changes in the diet of trophic generalist species (A. altiparanae, P. maculatus and I. labrosus) accompanied by a related increase in the condition factor values of these species in cage areas. Trophic specialist species, such as the carnivorous fish species G. knerii and P. squamosissimus, presented small differences between the CF and CT areas with regard to diet and showed no differences in other analyses performed. In conclusion, cage fish farms can affect the natural diet of trophic generalist fish species, directly affecting the nutritional status (condition factor), where food wastes was found to be one of the principal items consumed by this trophic guild. Results indicate that these species are responsible for recycling a great quantity of organic matter transferred by this type of activity, which, along with local fishery activities, contribute to mitigation of associated processes of eutrophication. © 2013 Elsevier B.V.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This manual documents some of the material related to the Survey of Living Conditions and Household Budgets (SLC/HBS) conducted in Saint Lucia by the Kairi Consultants Limited and National Assessment Team between 2005 and 2006. The SLC/HBS is a sample survey which generates data on households and individuals in the country. The main objectives of this survey were (i) to collect information from households on their expenditure patterns, income and other characteristics and; (ii) to revise the 'average shopping basket' used in constructing the Consumer Price Index (CPI) for the country, and the relative weights of the items in the basket. The survey also provided valuable data for an assessment of the impact of socio-economic policies on the living conditions of the resident population in Saint Lucia. Further, data on households gathered in the survey also provide valuable inputs for the compilation of the country's National Accounts statistics relating to the household sector. This manual was developed by the Economic Commission for Latin America and the Caribbean (ECLAC) – Subregional Headquarters in the Caribbean as a supplementary document for the Caribbean Household Surveys Database (CHSD). The main components of this manual include survey methodology and the questionnaires used for data collection. The latter are included in the annex at the end of the document. All information contained therein was provided by the Statistics Department in Saint Lucia. The ECLAC Subregional Headquarters for the Caribbean is pleased to acknowledge the Saint Lucia Statistics Department for graciously consenting to the use of their surveys and metadata under the project Improving Caribbean Household Surveys. Due recognition must also be given to the Statistics and Economics Projection Division at ECLAC (Santiago) who provided guidance in the standardization of the datasets and the creation of the Caribbean Household Surveys Databank.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O objetivo deste estudo foi avaliar alterações sazonais no índice gonadossomático (IGS%), fator de condição (K) e proporção sexual, a fim de determinar o período de atividade reprodutiva do bagre Auchenipterichthys longimanus (Siluriformes: Auchenipteridae), a partir da análise de exemplares coletados em igarapés da Floresta Nacional de Caxiuanã, estado do Pará, Brasil. Através de coletas bimestrais entre julho de 2008 e julho de 2009, foram capturados 589 exemplares de A. longimanus, sendo 251 machos e 338 fêmeas. Dentre os machos, 171 exemplares foram classificados como adultos e 80 foram jovens, e dentre as fêmeas, 249 eram adultas e 89 jovens. Por meio do estabelecimento de uma equação senoidal, a análise do IGS% evidenciou uma assincronia reprodutiva entre os sexos, pois os machos obtiveram maiores valores de IGS% em janeiro e as fêmeas apresentaram seu pico em março. Para os valores de IGS% de machos, a equação senoide mostrou-se significante somente para os valores brutos (P=0,001), sendo não identificada uma tendência com os valores médios do IGS% (P=0,136). Para as fêmeas, os valores de significância da equação senoide para o IGS% foram obtidos tanto para os dados brutos (P=0,012) quanto para os dados médios (P=0,026). Para o Fator de Condição, a equação senoide demonstrou variação nos valores brutos e médios de machos adultos (P=0,02 e P=0,00, respectivamente) e nos valores brutos de fêmeas (P=0,04), refletindo diferenças nos padrões de investimento energético entre os sexos. Em relação à proporção sexual, foi observada uma maior frequência de capturas de fêmeas reprodutivas em relação aos machos nos meses de Janeiro e Março de 2009, sugerindo um padrão de segregação sexual com fins reprodutivos. Esses parâmetros são fundamentais na avaliação, conservação e manejo dos estoques naturais de peixes, assim como para subsidiar estratégias e procedimentos para a preservação e conservação da ictiofauna.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: Recently, case reports have shown that immature teeth diagnosed with necrotic pulp and periapical periodontitis can be repaired through a regenerative endodontic procedure. True regeneration depends on the presence of stem cells in the remaining vital tissues. The aim of this study was to evaluate the histologic condition of the pulp tissue, root apical papilla, and periapical tissues after inducing endodontic infection in immature rat teeth for different periods. Methods: This study evaluated 18 first upper rat molars (36 roots). Periapical lesions were induced and were confirmed radiographically, and the animals were divided into 3 groups according to the days of pulp exposure for endodontic infection induction: 30, 60, and 90 days. Histologic analysis was performed in 5 different areas (ie, cervical, middle, and apical root canal thirds; the apical papilla; and the periapex surrounding the apical papilla). Results: At 30 days, one third of the specimens still showed vital but intensely inflamed pulp tissue in the apical third and vital apical papilla with varying degrees of inflammation. After 60 days, the results were similar with respect to the apical pulp tissue and apical papilla. Completely necrotic pulp tissue in the space canal and vital apical papilla were observed in about 67% of the cases after 90 days. Conclusions: Vital pulp tissue was observed in the apical third until 60 days and in the vital apical papilla until 90 days of infection in a rat model.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introduction: To analyze the knowledge, feelings and perceptions involving patients affected by leprosy, as a better understanding of these factors may be useful to decrease the stigma and prejudice associated with the condition. Methods: The study cohort consisted of 94 patients who underwent treatment for leprosy at the Health Units in the City of Cuiaba, Mato Grosso (MT), Brazil. The study questionnaire included items to collect information on socio-demographic data, knowledge about the disease, stigma, prejudice, self-esteem and quality of life of leprosy patients. Bivariate analyses were used to assess the data based on the chi-square test with a 5% significance threshold. Results: The results revealed that the study population consisted predominantly of males (55.3%) with an income between 1 and 3 times the minimum wage (67%). The survey respondents reported that the most significant difficulties related to the treatment were the side effects (44.7%) and the duration of the treatment (28.7%). A total of 72.3% of the subjects were knowledgeable about the disease, of whom 26.6% had the leprosy reaction. Stigma and prejudice were cited by 93.6% of the participants. Based on the responses, 40.4% of patients reported being depressed and sad, and 69.1% of the subjects encountered problems at work after being diagnosed. A total of 45.7% of the patients rated their quality of life between bad and very bad. Conclusions: Our results suggest that leprosy causes suffering in patients beyond pain and discomfort and greatly influences social participation.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Ceramic parts are increasingly replacing metal parts due to their excellent physical, chemical and mechanical properties, however they also make them difficult to manufacture by traditional machining methods. The developments carried out in this work are used to estimate tool wear during the grinding of advanced ceramics. The learning process was fed with data collected from a surface grinding machine with tangential diamond wheel and alumina ceramic test specimens, in three cutting configurations: with depths of cut of 120 mu m, 70 mu m and 20 mu m. The grinding wheel speed was 35m/s and the table speed 2.3m/s. Four neural models were evaluated, namely: Multilayer Perceptron, Radial Basis Function, Generalized Regression Neural Networks and the Adaptive Neuro-Fuzzy Inference System. The models'performance evaluation routines were executed automatically, testing all the possible combinations of inputs, number of neurons, number of layers, and spreading. The computational results reveal that the neural models were highly successful in estimating tool wear, since the errors were lower than 4%.