Multi-criteria selection of structural adhesives to bond ABS parts obtained by rapid prototyping

One of the most used methods in rapidprototyping is Fused Deposition Modeling (FDM), which provides components with a reasonable strength in plastic materials such as ABS and has a low environmental impact. However, the FDM process exhibits low levels of surface finishing, difficulty in getting complex and/or small geometries and low consistency in “slim” elements of the parts. Furthermore, “cantilever” elements need large material structures to be supported. The solution of these deficiencies requires a comprehensive review of the three-dimensional part design to enhance advantages and performances of FDM and reduce their constraints. As a key feature of this redesign a novel method of construction by assembling parts with structuraladhesive joints is proposed. These adhesive joints should be designed specifically to fit the plastic substrate and the FDM manufacturing technology. To achieve this, the most suitable structuraladhesiveselection is firstly required. Therefore, the present work analyzes five different families of adhesives (cyanoacrylate, polyurethane, epoxy, acrylic and silicone), and, by means of the application of technical multi-criteria decision analysis based on the analytic hierarchy process (AHP), to select the structuraladhesive that better conjugates mechanical benefits and adaptation to the FDM manufacturing process

Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action

Under-deck cable-stayed bridges are very effective structural systems for which the strong contribution of the stay cables under live loading allows for the design of very slender decks for persistent and transient loading scenarios. Their behaviour when subjected to seismic excitation is investigated herein and a set of design criteria are presented that relate to the type and arrangement of bearings, the number and configuration of struts, and the transverse distribution of stay cables. The nonlinear behaviour of these bridges when subject to both near-field and far-field accelerograms has been thoroughly investigated through the use of incremental dynamic analyses. An intensity measure that reflects the pertinent contributions to response when several vibration modes are activated was proposed and is shown to be effective for the analysis of this structural type. The under-deck cable-stay system contributes in a very positive manner to reducing the response when the bridges are subject to very strong seismic excitation. For such scenarios, the reduction in the stiffness of the deck because of crack formation, when prestressed concrete decks are used, mobilises the cable system and enhances the overall performance of the system. Sets of natural accelerograms that are compliant with the prescriptions of Eurocode 8 were also applied to propose a set of design criteria for this bridge type in areas prone to earthquakes. Particular attention is given to outlining the optimal strategies for the deployment of bearings

Aplicación de documentos de identificación electrónica a un esquema de voto telemático a escala paneuropea, seguro, auditable y verificable.

En este trabajo de tesis se propone un esquema de votación telemática, de carácter paneuropeo y transnacional, que es capaz de satisfacer las más altas exigencias en materia de seguridad. Este enfoque transnacional supone una importante novedad que obliga a identificar a los ciudadanos más allá de las fronteras de su país, exigencia que se traduce en la necesidad de que todos los ciudadanos europeos dispongan de una identidad digital y en que ésta sea reconocida más allá de las fronteras de su país de origen. Bajo estas premisas, la propuesta recogida en esta tesis se aborda desde dos vertientes complementarias: por una parte, el diseño de un esquema de votación capaz de conquistar la confianza de gobiernos y ciudadanos europeos y, por otra, la búsqueda de una respuesta al problema de interoperabilidad de Sistemas de Gestión de Identidad (IDMs), en consonancia con los trabajos que actualmente realiza la UE para la integración de los servicios proporcionados por las Administraciones Públicas de los distintos países europeos. El punto de partida de este trabajo ha sido la identificación de los requisitos que determinan el adecuado funcionamiento de un sistema de votación telemática para, a partir de ellos,proponer un conjunto de elementos y criterios que permitan, por una parte, establecer comparaciones entre distintos sistemas telemáticos de votación y, por otra, evaluar la idoneidad del sistema propuesto. A continuación se han tomado las más recientes y significativas experiencias de votación telemática llevadas a cabo por diferentes países en la automatización de sus procesos electorales, analizándolas en profundidad para demostrar que, incluso en los sistemas más recientes, todavía subsisten importantes deficiencias relativas a la seguridad. Asimismo, se ha constatado que un sector importante de la población se muestra receloso y, a menudo, cuestiona la validez de los resultados publicados. Por tanto, un sistema que aspire a ganarse la confianza de ciudadanos y gobernantes no sólo debe operar correctamente, trasladando los procesos tradicionales de votación al contexto telemático, sino que debe proporcionar mecanismos adicionales que permitan superar los temores que inspira el nuevo sistema de votación. Conforme a este principio, el enfoque de esta tesis, se orienta, en primer lugar, hacia la creación de pruebas irrefutables, entendibles y auditables a lo largo de todo el proceso de votación, que permitan demostrar con certeza y ante todos los actores implicados en el proceso (gobierno, partidos políticos, votantes, Mesa Electoral, interventores, Junta Electoral,jueces, etc.) que los resultados publicados son fidedignos y que no se han violado los principios de anonimato y de “una persona, un voto”. Bajo este planteamiento, la solución recogida en esta tesis no sólo prevé mecanismos para minimizar el riesgo de compra de votos, sino que además incorpora mecanismos de seguridad robustos que permitirán no sólo detectar posibles intentos de manipulación del sistema, sino también identificar cuál ha sido el agente responsable. De forma adicional, esta tesis va más allá y traslada el escenario de votación a un ámbito paneuropeo donde aparecen nuevos problemas. En efecto, en la actualidad uno de los principales retos a los que se enfrentan las votaciones de carácter transnacional es sin duda la falta de procedimientos rigurosos y dinámicos para la actualización sincronizada de los censos de votantes de los distintos países que evite la presencia de errores que redunden en la incapacidad de controlar que una persona emita más de un voto, o que se vea impedido del todo a ejercer su derecho. Este reconocimiento de la identidad transnacional requiere la interoperabilidad entre los IDMs de los distintos países europeos. Para dar solución a este problema, esta tesis se apoya en las propuestas emergentes en el seno de la UE, que previsiblemente se consolidarán en los próximos años, tanto en materia de identidad digital (con la puesta en marcha de la Tarjeta de Ciudadano Europeo) como con el despliegue de una infraestructura de gestión de identidad que haga posible la interoperabilidad de los IDMs de los distintos estados miembros. A partir de ellas, en esta tesis se propone una infraestructura telemática que facilita la interoperabilidad de los sistemas de gestión de los censos de los distintos estados europeos en los que se lleve a cabo conjuntamente la votación. El resultado es un sistema versátil, seguro, totalmente robusto, fiable y auditable que puede ser aplicado en elecciones paneuropeas y que contempla la actualización dinámica del censo como una parte crítica del proceso de votación. ABSTRACT: This Ph. D. dissertation proposes a pan‐European and transnational system of telematic voting that is capable of meeting the strictest security standards. This transnational approach is a significant innovation that entails identifying citizens beyond the borders of their own country,thus requiring that all European citizens must have a digital identity that is recognized beyond the borders of their country of origin. Based on these premises, the proposal in this thesis is analyzed in two mutually‐reinforcing ways: first, a voting system is designed that is capable of winning the confidence of European governments and citizens and, second, a solution is conceived for the problem of interoperability of Identity Management Systems (IDMs) that is consistent with work being carried out by the EU to integrate the services provided by the public administrations of different European countries. The starting point of this paper is to identify the requirements for the adequate functioning of a telematic voting system and then to propose a set of elements and criteria that will allow for making comparisons between different such telematic voting systems for the purpose of evaluating the suitability of the proposed system. Then, this thesis provides an in‐depth analysis of most recent significant experiences in telematic voting carried out by different countries with the aim of automating electoral processes, and shows that even the most recent systems have significant shortcomings in the realm of security. Further, a significant portion of the population has shown itself to be wary,and they often question the validity of the published results. Therefore, a system that aspires to win the trust of citizens and leaders must not only operate correctly by transferring traditional voting processes into a telematic environment, but must also provide additional mechanisms that can overcome the fears aroused by the new voting system. Hence, this thesis focuses, first, on creating irrefutable, comprehensible and auditable proof throughout the voting process that can demonstrate to all actors in the process – the government, political parties, voters, polling station workers, electoral officials, judges, etc. ‐that the published results are accurate and that the principles of anonymity and one person,one vote, have not been violated. Accordingly, the solution in this thesis includes mechanisms to minimize the risk of vote buying, in addition to robust security mechanisms that can not only detect possible attempts to manipulate the system, but also identify the responsible party. Additionally, this thesis goes one step further and moves the voting scenario to a pan‐European scale, in which new problems appear. Indeed, one of the major challenges at present for transnational voting processes is the lack of rigorous and dynamic procedures for synchronized updating of different countries’ voter rolls, free from errors that may make the system unable to keep an individual from either casting more than one vote, or from losing the effective exercise of the right to vote. This recognition of transnational identity requires interoperability between the IDMs of different European countries. To solve the problem, this thesis relies on proposals emerging within the EU that are expected to take shape in the coming years, both in digital identity – with the launch of the European Citizen Card – and in the deployment of an identity management infrastructure that will enable interoperability of the IDMs of different member states. Based on these, the thesis proposes a telematic infrastructure that will achieve interoperability of the census management systems of European states in which voting processes are jointly carried out. The result is a versatile, secure, totally robust, reliable and auditable system that can be applied in pan‐European election, and that includes dynamic updating of the voter rolls as a critical part of the voting process.

Continuous multi-criteria methods for crop and soil conservation planning on La Colacha (Río Cuarto, Province of Cordoba, Argentina)

Agro-areas of Arroyos Menores (La Colacha) west and south of Rand south of R?o Cuarto (Prov. of Cordoba, Argentina) basins are very fertile but have high soil loses. Extreme rain events, inundations and other severe erosions forming gullies demand urgently actions in this area to avoid soil degradation and erosion supporting good levels of agro production. The authors first improved hydrologic data on La Colacha, evaluated the systems of soil uses and actions that could be recommended considering the relevant aspects of the study area and applied decision support systems (DSS) with mathematic tools for planning of defences and uses of soils in these areas. These were conducted here using multi-criteria models, in multi-criteria decision making (MCDM); first of discrete MCDM to chose among global types of use of soils, and then of continuous MCDM to evaluate and optimize combined actions, including repartition of soil use and the necessary levels of works for soil conservation and for hydraulic management to conserve against erosion these basins. Relatively global solutions for La Colacha area have been defined and were optimised by Linear Programming in Goal Programming forms that are presented as Weighted or Lexicographic Goal Programming and as Compromise Programming. The decision methods used are described, indicating algorithms used, and examples for some representative scenarios on La Colacha area are given.

Criteria for Positioning Active Multilateration Stations Located Close to Distance Measuring Equipment

The need for the use of another surveillance system when radar cannot be used is the reason for the development of the Multilateration (MLT) Systems. However, there are many systems that operate in the L-Band (960-1215MHz) that could produce interference between systems. At airports, some interference has been detected between transmissions of MLT systems (1030MHz and 1090MHz) and Distance Measuring Equipment (DME) (960-1215MHz).

Identifying the semantics of eligibility criteria of clinical trials based on relevant medical ontologies

An important objective of the INTEGRATE project1 is to build tools that support the efficient execution of post-genomic multi-centric clinical trials in breast cancer, which includes the automatic assessment of the eligibility of patients for available trials. The population suited to be enrolled in a trial is described by a set of free-text eligibility criteria that are both syntactically and semantically complex. At the same time, the assessment of the eligibility of a patient for a trial requires the (machineprocessable) understanding of the semantics of the eligibility criteria in order to further evaluate if the patient data available for example in the hospital EHR satisfies these criteria. This paper presents an analysis of the semantics of the clinical trial eligibility criteria based on relevant medical ontologies in the clinical research domain: SNOMED-CT, LOINC, MedDRA. We detect subsets of these widely-adopted ontologies that characterize the semantics of the eligibility criteria of trials in various clinical domains and compare these sets. Next, we evaluate the occurrence frequency of the concepts in the concrete case of breast cancer (which is our first application domain) in order to provide meaningful priorities for the task of binding/mapping these ontology concepts to the actual patient data. We further assess the effort required to extend our approach to new domains in terms of additional semantic mappings that need to be developed.

Criteria for Ballast Flight Initiation Induced by High Speed Trains

One of the phenomena that limit the velocity of trains in high speed lines is the so- called “ballast pick-up”. It is a ballast train-induced-wind erosion (or BATIWE) that can produce damage to the train under body and the infrastructure surrounding the tracks. The analysis of the measurements taken during several passes of the train allows for a criterion of ballast flight initiation to be obtained. The first rotation of a ballast stone occurs when the impulse given to the stone (arising from the aerodynamic loading produced by the wind gust genera ted by the passing train) overpasses a critical impulse. This impulse depends on the physical properties of the stone (mass, shape, moment of inertia, etc. ...) and its posture on the track bed. The aim of this paper is to report on the experimental results obtained in the ADIF’S Brihuega (Guadalajara) test station, in the Madrid to Barcelona high speed line, and the way they can be used to support the feasibility of the definition of a criterion to evaluate the BA TIWE capability of trains. The results obtained show the feasibility of the proposed method, and contribute to a method of BATIWE characterization, which can be relevant for the development of train interoperability standardization.

Criteria for mathematical model selection for satellite vibro-acoustic analysis depending on frequency range

Satellites and space equipment are exposed to diffuse acoustic fields during the launch process. The use of adequate techniques to model the response to the acoustic loads is a fundamental task during the design and verification phases. Considering the modal density of each element is necessary to identify the correct methodology. In this report selection criteria are presented in order to choose the correct modelling technique depending on the frequency ranges. A model satellite’s response to acoustic loads is presented, determining the modal densities of each component in different frequency ranges. The paper proposes to select the mathematical method in each modal density range and the differences in the response estimation due to the different used techniques. In addition, the methodologies to analyse the intermediate range of the system are discussed. The results are compared with experimental testing data obtained in an experimental modal test.

Analysis of the operator action and the single failure criteria in a SGTR sequence using best estimate assumptions with TRACE 5.0

Steam Generator Tube Rupture (SGTR) sequences in Pressurized Water Reactors are known to be one of the most demanding transients for the operating crew. SGTR are a special kind of transient as they could lead to radiological releases without core damage or containment failure, as they can constitute a direct path from the reactor coolant system to the environment. The first methodology used to perform the Deterministic Safety Analysis (DSA) of a SGTR did not credit the operator action for the first 30 min of the transient, assuming that the operating crew was able to stop the primary to secondary leakage within that period of time. However, the different real SGTR accident cases happened in the USA and over the world demonstrated that the operators usually take more than 30 min to stop the leakage in actual sequences. Some methodologies were raised to overcome that fact, considering operator actions from the beginning of the transient, as it is done in Probabilistic Safety Analysis. This paper presents the results of comparing different assumptions regarding the single failure criteria and the operator action taken from the most common methodologies included in the different Deterministic Safety Analysis. One single failure criteria that has not been analysed previously in the literature is proposed and analysed in this paper too. The comparison is done with a PWR Westinghouse three loop model in TRACE code (Almaraz NPP) with best estimate assumptions but including deterministic hypothesis such as single failure criteria or loss of offsite power. The behaviour of the reactor is quite diverse depending on the different assumptions made regarding the operator actions. On the other hand, although there are high conservatisms included in the hypothesis, as the single failure criteria, all the results are quite far from the regulatory limits. In addition, some improvements to the Emergency Operating Procedures to minimize the offsite release from the damaged SG in case of a SGTR are outlined taking into account the offsite dose sensitivity results.

A multi-criteria optimization and decision-making approach for improvement of food engineering processes.

The objective of this study was to propose a multi-criteria optimization and decision-making technique to solve food engineering problems. This technique was demostrated using experimental data obtained on osmotic dehydratation of carrot cubes in a sodium chloride solution. The Aggregating Functions Approach, the Adaptive Random Search Algorithm, and the Penalty Functions Approach were used in this study to compute the initial set of non-dominated or Pareto-optimal solutions. Multiple non-linear regression analysis was performed on a set of experimental data in order to obtain particular multi-objective functions (responses), namely water loss, solute gain, rehydration ratio, three different colour criteria of rehydrated product, and sensory evaluation (organoleptic quality). Two multi-criteria decision-making approaches, the Analytic Hierarchy Process (AHP) and the Tabular Method (TM), were used simultaneously to choose the best alternative among the set of non-dominated solutions. The multi-criteria optimization and decision-making technique proposed in this study can facilitate the assessment of criteria weights, giving rise to a fairer, more consistent, and adequate final compromised solution or food process. This technique can be useful to food scientists in research and education, as well as to engineers involved in the improvement of a variety of food engineering processes.

Port planning for the Port of Vigo using port and city integration criteria

Project planning and architectural management of a port area should include many variables, it must be in harmony with its environment and its historical development as the key to successful integration. This article explains the elements which should be taken into account when doing such planning by describing the proposal presented on the ?Concurso public internacional de ideas para proyectar la ordenación urbanística y arquitectónica del área central del puerto de Vigo?, with the aim of sharing comprehensive applied design philosofy, it will inspire and help future designers. Creative imagination is great added value to engineering creations, but should not overwhelm functionality and sustainability, but to be in harmony with them. The maximum aesthetic expression in engineering is achieved as the product of the conceptual elegance of the functionality of the structures.

Technical criteria for the desing of foundation slabs and perimetral wall in difficult terrain in Madrid. Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Technical criteria for the design of foundation slabs and perimetral wall in difficult terrain in south east Madrid, Spain

This paper explains a procedure for the choice of ballast modules used for the design of direct continuous foundation in karst terrain. The presence of dangerous cavities is introduced in this procedure thereby evaluating risk failure. It also provides pertinent guidelines to direct the geotechnical survey of the terrain.

Impedance-based stability and transient-performance assessment applying maximum peak criteria

The impedance-based stability-assessment method has turned out to be a very effective tool and its usage is rapidly growing in different applications ranging from the conventional interconnected dc/dc systems to the grid-connected renewable energy systems. The results are sometime given as a certain forbidden region in the complex plane out of which the impedance ratio--known as minor-loop gain--shall stay for ensuring robust stability. This letter discusses the circle-like forbidden region occupying minimum area in the complex plane, defined by applying maximum peak criteria, which is well-known theory in control engineering. The investigation shows that the circle-like forbidden region will ensure robust stability only if the impedance-based minor-loop gain is determined at the very input or output of each subsystem within the interconnected system. Experimental evidence is provided based on a small-scale dc/dc distributed system.

Study for the rehabilitation of vernacular architecture with sustainable criteria

This paper assesses rural vernacular heritage established in a warm temperate climate, with dry, hot summer, in São Vicente e Ventosa (SVV), Alentejo, Portugal, and takes part in a larger investigation intending to create rehabilitation guidelines, with sustainable criteria and integration of recent technologies, to improving indoor comfort, and revert the state of deterioration. To further reach this aim, this paper proposes a four phases methodology: data collection, evaluation, simulation and development; a first survey data analysis, including climate data and the adapted comfort climograph and isopleth diagram, allows an understanding of thermal comfort and main constraints in site, as well as suitable bioclimatic strategies for SVV: high thermal inertia for tempering extreme summer conditions and the considerable temperature amplitudes throughout the year, complementarily night ventilation for passive cooling, small-sized window openings and movable shading systems for solar radiation protection. An efficient behaviour in stabilizing indoor temperature swings is revealed.