Oxide Semiconductors For Organic Opto-electronic Devices

Development of transparent oxide semiconductors (TOS) from Earth-abundant materials is of great interest for cost-effective thin film device applications, such as solar cells, light emitting diodes (LEDs), touch-sensitive displays, electronic paper, and transparent thin film transistors. The need of inexpensive or high performance electrode might be even greater for organic photovoltaic (OPV), with the goal to harvest renewable energy with inexpensive, lightweight, and cost competitive materials. The natural abundance of zinc and the wide bandgap ($sim$3.3 eV) of its oxide make it an ideal candidate. In this dissertation, I have introduced various concepts on the modulations of various surface, interface and bulk opto-electronic properties of ZnO based semiconductor for charge transport, charge selectivity and optimal device performance. I have categorized transparent semiconductors into two sub groups depending upon their role in a device. Electrodes, usually 200 to 500 nm thick, optimized for good transparency and transporting the charges to the external circuit. Here, the electrical conductivity in parallel direction to thin film, i.e bulk conductivity is important. And contacts, usually 5 to 50 nm thick, are optimized in case of solar cells for providing charge selectivity and asymmetry to manipulate the built in field inside the device for charge separation and collection. Whereas in Organic LEDs (OLEDs), contacts provide optimum energy level alignment at organic oxide interface for improved charge injections. For an optimal solar cell performance, transparent electrodes are designed with maximum transparency in the region of interest to maximize the light to pass through to the absorber layer for photo-generation, plus they are designed for minimum sheet resistance for efficient charge collection and transport. As such there is need for material with high conductivity and transparency. Doping ZnO with some common elements such as B, Al, Ga, In, Ge, Si, and F result in n-type doping with increase in carriers resulting in high conductivity electrode, with better or comparable opto-electronic properties compared to current industry-standard indium tin oxide (ITO). Furthermore, improvement in mobility due to improvement on crystallographic structure also provide alternative path for high conductivity ZnO TCOs. Implementing these two aspects, various studies were done on gallium doped zinc oxide (GZO) transparent electrode, a very promising indium free electrode. The dynamics of the superimposed RF and DC power sputtering was utilized to improve the microstructure during the thin films growth, resulting in GZO electrode with conductivity greater than 4000 S/cm and transparency greater than 90 %. Similarly, various studies on research and development of Indium Zinc Tin Oxide and Indium Zinc Oxide thin films which can be applied to flexible substrates for next generation solar cells application is presented. In these new TCO systems, understanding the role of crystallographic structure ranging from poly-crystalline to amorphous phase and the influence on the charge transport and optical transparency as well as important surface passivation and surface charge transport properties. Implementation of these electrode based on ZnO on opto-electronics devices such as OLED and OPV is complicated due to chemical interaction over time with the organic layer or with ambient. The problem of inefficient charge collection/injection due to poor understanding of interface and/or bulk property of oxide electrode exists at several oxide-organic interfaces. The surface conductivity, the work function, the formation of dipoles and the band-bending at the interfacial sites can positively or negatively impact the device performance. Detailed characterization of the surface composition both before and after various chemicals treatment of various oxide electrode can therefore provide insight into optimization of device performance. Some of the work related to controlling the interfacial chemistry associated with charge transport of transparent electrodes are discussed. Thus, the role of various pre-treatment on poly-crystalline GZO electrode and amorphous indium zinc oxide (IZO) electrode is compared and contrasted. From the study, we have found that removal of defects and self passivating defects caused by accumulation of hydroxides in the surface of both poly-crystalline GZO and amorphous IZO, are critical for improving the surface conductivity and charge transport. Further insight on how these insulating and self-passivating defects cause charge accumulation and recombination in an device is discussed. With recent rapid development of bulk-heterojunction organic photovoltaics active materials, devices employing ZnO and ZnO based electrode provide air stable and cost-competitive alternatives to traditional inorganic photovoltaics. The organic light emitting diodes (OLEDs) have already been commercialized, thus to follow in the footsteps of this technology, OPV devices need further improvement in power conversion efficiency and stable materials resulting in long device lifetimes. Use of low work function metals such as Ca/Al in standard geometry do provide good electrode for electron collection, but serious problems using low work-function metal electrodes originates from the formation of non-conductive metal oxide due to oxidation resulting in rapid device failure. Hence, using low work-function, air stable, conductive metal oxides such as ZnO as electrons collecting electrode and high work-function, air stable metals such as silver for harvesting holes, has been on the rise. Devices with degenerately doped ZnO functioning as transparent conductive electrode, or as charge selective layer in a polymer/fullerene based heterojunction, present useful device structures for investigating the functional mechanisms within OPV devices and a possible pathway towards improved air-stable high efficiency devices. Furthermore, analysis of the physical properties of the ZnO layers with varying thickness, crystallographic structure, surface chemistry and grain size deposited via various techniques such as atomic layer deposition, sputtering and solution-processed ZnO with their respective OPV device performance is discussed. We find similarity and differences in electrode property for good charge injection in OLEDs and good charge collection in OPV devices very insightful in understanding physics behind device failures and successes. In general, self-passivating surface of amorphous TCOs IZO, ZTO and IZTO forms insulating layer that hinders the charge collection. Similarly, we find modulation of the carrier concentration and the mobility in electron transport layer, namely zinc oxide thin films, very important for optimizing device performance.

A Highly Efficient Solvent-Free Asymmetric Direct Aldol Reaction Organocatalyzed by Recoverable (s)-Binam-L-Prolinamides. ESI-MS Evidence of the Enamine-Iminium Formation

Recoverable (Sa)-binam-l-prolinamide in combination with benzoic acid is used as catalysts in the direct aldol reaction between cycloalkyl, alkyl, and α-functionalized ketones and aldehydes under solvent-free reaction conditions. Three different methods are assayed: simple conventional magnetic stirring, magnetic stirring after previous dissolution in THF and evaporation, and ball mill technique. These procedures allow one to reduce not only the amount of required ketone to 2 equiv but also the reaction time to give the aldol products with regio-, diastereo-, and enantioselectivities comparable to those in organic or aqueous solvents. Generally anti-isomers are mainly obtained with enantioselectivities up to 97%. The reaction can be carried out under these conditions also using aldehydes as nucleophiles, yielding after in situ reduction of the aldol products the corresponding chiral 1,3-diols with moderate to high enantioselectivities mainly as anti-isomers. The aldol reaction has been studied by the use of positive ESI-MS technique, providing the evidence of the formation of the corresponding enamine−iminium intermediates.

Solvent-Free Enantioselective Organocatalyzed Aldol Reactions

The use of proline as catalyst for the aldol process has given a boost to the development of organocatalysis as a research area. Since then, a plethora of organocatalysts of diverse structures have been developed for this and other organic transformations under different reaction conditions. The use of an organic molecule as catalyst to promote a reaction meets several principles of Green Chemistry. The implementation of solvent-free methodologies to carry out the aldol reaction was soon envisaged. These solvent-free processes can be performed using conventional magnetic stirring or applying ball milling techniques and are even compatible with the use of supported organocatalysts as promoters, which allows the recovery and reuse of the organocatalysts. In addition, other advantages such as the reduction of the required amount of nucleophile and the acceleration of the reaction are accomplished by using solvent-free conditions leading to a “greener” and more sustainable process.

Hydrogen Peroxide in Biocatalysis. A Dangerous Liaison

Hydrogen peroxide is a substrate or side-product in many enzyme-catalyzed reactions. For example, it is a side-product of oxidases, resulting from the re-oxidation of FAD with molecular oxygen, and it is a substrate for peroxidases and other enzymes. However, hydrogen peroxide is able to chemically modify the peptide core of the enzymes it interacts with, and also to produce the oxidation of some cofactors and prostetic groups (e.g., the hemo group). Thus, the development of strategies that may permit to increase the stability of enzymes in the presence of this deleterious reagent is an interesting target. This enhancement in enzyme stability has been attempted following almost all available strategies: site-directed mutagenesis (eliminating the most reactive moieties), medium engineering (using stabilizers), immobilization and chemical modification (trying to generate hydrophobic environments surrounding the enzyme, to confer higher rigidity to the protein or to generate oxidation-resistant groups), or the use of systems capable of decomposing hydrogen peroxide under very mild conditions. If hydrogen peroxide is just a side-product, its immediate removal has been reported to be the best solution. In some cases, when hydrogen peroxide is the substrate and its decomposition is not a sensible solution, researchers coupled one enzyme generating hydrogen peroxide “in situ” to the target enzyme resulting in a continuous supply of this reagent at low concentrations thus preventing enzyme inactivation. This review will focus on the general role of hydrogen peroxide in biocatalysis, the main mechanisms of enzyme inactivation produced by this reactive and the different strategies used to prevent enzyme inactivation caused by this “dangerous liaison”.

Biochemical mechanisms involved in pulmonary hypo-alveolarization induced by peroxides contaminating parenteral nutrition in newborn guinea pig

La dysplasie broncho-pulmonaire (DBP), caractérisée par un défaut de l’alvéolarisation, est une complication pathologique associée à un stress oxydant chez le nouveau-né prématuré. La DBP est présente chez près de 50 % des nouveau-nés de moins de 29 semaines de gestation. La nutrition parentérale (NP) que ces nouveau-nés reçoivent pour cause d’immaturité gastro-intestinale est une source importante de stress oxydant. En effet, leur NP est contaminée par des peroxydes, dont l’ascorbylperoxyde qui est une forme peroxydée du déshydroascorbate. La génération des peroxydes est catalysée par la lumière ambiante. La photoprotection de la NP, quoique difficile d’application en clinique, est associée à une diminution de l’incidence de la DBP chez les enfants prématurés. Chez l’animal nouveau-né, la photoprotection de la NP est associée à un meilleur développement alvéolaire. Ainsi, nous émettons l’hypothèse que l’ascorbylperoxide infusé avec la NP cause la perte d’alvéoles suite à une apoptose exagérée induite par l’oxydation du potentiel redox du glutathion. Cette oxydation du potentiel redox serait occasionnée par l’inhibition de la transformation hépatique de la méthionine en cystéine, menant à une diminution de la synthèse de glutathion au foie et dans les tissus tels que les poumons. La confirmation de cette hypothèse suggérera qu’un ajout de glutathion dans la NP permettra une meilleure détoxification de l’ascorbylperoxide par l’action de la glutathion peroxydase, et préviendra l’oxydation du potentiel redox et ainsi, la perte d'alvéoles par apoptose. Objectifs : Le but de mon projet de recherche est de comprendre les mécanismes biochimiques liant la NP et le développement de la DBP chez le nouveau-né prématuré et de proposer une alternative nutritionnelle prévenant le développement de cette complication fréquemment observée dans cette population. Les objectifs spécifiques sont : 1) d’évaluer l’impact, au poumon, de l’infusion de l’ascorbylperoxyde sur l’axe métabolique potentiel redox du glutathion - apoptose - le développement alvéolaire; 2) d’étudier l’impact de l’ascorbylperoxyde et du potentiel redox sur l’activité hépatique de la méthionine adénosyltransférase (MAT), première enzyme de la cascade métabolique transformant la méthionine en cystéine; et 3) de tenter de prévenir l’impact négatif de la NP ou de l’infusion d’ascorbylperoxyde sur le poumon en améliorant le statut en glutathion. Méthodes: Par un cathéter fixé dans la jugulaire, des cochons d’Inde de trois jours de vie (n = 8 par groupe) ont reçu en continu durant 4 jours une NP ou une solution de base (dextrose + NaCl) enrichie des différentes molécules à l’essai. Le premier objectif a été atteint en enrichissant la solution de base en ascorbylperoxyde à 0, 20, 60 et 180 μM. Ces solutions contenaient ou non 350 μM H2O2 pour se rapprocher des conditions cliniques. Le second objectif a été atteint en investiguant les mécanismes d’inhibition de la MAT dans des animaux infusés ou non avec des solutions contenant la solution de base, des peroxydes, du glutathion et la NP (dextrose + acides aminés + multivitamines + lipides). Le troisième objectif a été atteint en ajoutant ou non à une solution d’ascorbylperoxide ou à la NP 10 μM de glutathion (GSSG), afin d’obtenir une concentration plasmatique normale de glutathion. Après 4 jours, les poumons étaient prélevés et traités pour la détermination de GSH et GSSG par électrophorèse capillaire, le potentiel redox était calculé selon l'équation de Nernst et le niveau de caspase-3 actif (marqueur d’apoptose) par Western blot et l’index d’alvéolarisation quantifié par le nombre d’interceptes entre des structures histologiques et une droite calibrée. Les données étaient comparées par ANOVA, les effets étaient considérés comme significatifs si le p était inférieur à 0,05. Résultats: L’infusion de l’ascorbylperoxyde, indépendamment du H2O2, a induit une hypoalvéolarisation, une activation de la caspase-3 et une oxydation du potentiel redox de manière dose-dépendante. Ces effets ont été empêchés par l’ajout de GSSG à la NP ou à la solution d’ascorbylperoxyde (180 M). L’ascorbylperoxyde et le H2O2 ont inhibé l’activité de MAT tandis qu’elle était linéairement modulée par la valeur du potentiel redox hépatique. Conclusion : Nos résultats suggèrent que l’ascorbylperoxyde est l’agent actif de la NP conduisant au développement de la DBP. Ainsi la correction des bas niveaux de glutathion induits par les peroxydes de la NP favorise la détoxification des peroxydes et la correction du potentiel redox pulmonaire ; ce qui a protégé les poumons des effets délétères de la NP en outrepassant l’inhibition de la MAT hépatique. Nos résultats sont d'une grande importance car ils donnent de l'espoir pour une prévention possible de la DBP.

Biochemical mechanisms involved in pulmonary hypo-alveolarization induced by peroxides contaminating parenteral nutrition in newborn guinea pig

La dysplasie broncho-pulmonaire (DBP), caractérisée par un défaut de l’alvéolarisation, est une complication pathologique associée à un stress oxydant chez le nouveau-né prématuré. La DBP est présente chez près de 50 % des nouveau-nés de moins de 29 semaines de gestation. La nutrition parentérale (NP) que ces nouveau-nés reçoivent pour cause d’immaturité gastro-intestinale est une source importante de stress oxydant. En effet, leur NP est contaminée par des peroxydes, dont l’ascorbylperoxyde qui est une forme peroxydée du déshydroascorbate. La génération des peroxydes est catalysée par la lumière ambiante. La photoprotection de la NP, quoique difficile d’application en clinique, est associée à une diminution de l’incidence de la DBP chez les enfants prématurés. Chez l’animal nouveau-né, la photoprotection de la NP est associée à un meilleur développement alvéolaire. Ainsi, nous émettons l’hypothèse que l’ascorbylperoxide infusé avec la NP cause la perte d’alvéoles suite à une apoptose exagérée induite par l’oxydation du potentiel redox du glutathion. Cette oxydation du potentiel redox serait occasionnée par l’inhibition de la transformation hépatique de la méthionine en cystéine, menant à une diminution de la synthèse de glutathion au foie et dans les tissus tels que les poumons. La confirmation de cette hypothèse suggérera qu’un ajout de glutathion dans la NP permettra une meilleure détoxification de l’ascorbylperoxide par l’action de la glutathion peroxydase, et préviendra l’oxydation du potentiel redox et ainsi, la perte d'alvéoles par apoptose. Objectifs : Le but de mon projet de recherche est de comprendre les mécanismes biochimiques liant la NP et le développement de la DBP chez le nouveau-né prématuré et de proposer une alternative nutritionnelle prévenant le développement de cette complication fréquemment observée dans cette population. Les objectifs spécifiques sont : 1) d’évaluer l’impact, au poumon, de l’infusion de l’ascorbylperoxyde sur l’axe métabolique potentiel redox du glutathion - apoptose - le développement alvéolaire; 2) d’étudier l’impact de l’ascorbylperoxyde et du potentiel redox sur l’activité hépatique de la méthionine adénosyltransférase (MAT), première enzyme de la cascade métabolique transformant la méthionine en cystéine; et 3) de tenter de prévenir l’impact négatif de la NP ou de l’infusion d’ascorbylperoxyde sur le poumon en améliorant le statut en glutathion. Méthodes: Par un cathéter fixé dans la jugulaire, des cochons d’Inde de trois jours de vie (n = 8 par groupe) ont reçu en continu durant 4 jours une NP ou une solution de base (dextrose + NaCl) enrichie des différentes molécules à l’essai. Le premier objectif a été atteint en enrichissant la solution de base en ascorbylperoxyde à 0, 20, 60 et 180 μM. Ces solutions contenaient ou non 350 μM H2O2 pour se rapprocher des conditions cliniques. Le second objectif a été atteint en investiguant les mécanismes d’inhibition de la MAT dans des animaux infusés ou non avec des solutions contenant la solution de base, des peroxydes, du glutathion et la NP (dextrose + acides aminés + multivitamines + lipides). Le troisième objectif a été atteint en ajoutant ou non à une solution d’ascorbylperoxide ou à la NP 10 μM de glutathion (GSSG), afin d’obtenir une concentration plasmatique normale de glutathion. Après 4 jours, les poumons étaient prélevés et traités pour la détermination de GSH et GSSG par électrophorèse capillaire, le potentiel redox était calculé selon l'équation de Nernst et le niveau de caspase-3 actif (marqueur d’apoptose) par Western blot et l’index d’alvéolarisation quantifié par le nombre d’interceptes entre des structures histologiques et une droite calibrée. Les données étaient comparées par ANOVA, les effets étaient considérés comme significatifs si le p était inférieur à 0,05. Résultats: L’infusion de l’ascorbylperoxyde, indépendamment du H2O2, a induit une hypoalvéolarisation, une activation de la caspase-3 et une oxydation du potentiel redox de manière dose-dépendante. Ces effets ont été empêchés par l’ajout de GSSG à la NP ou à la solution d’ascorbylperoxyde (180 M). L’ascorbylperoxyde et le H2O2 ont inhibé l’activité de MAT tandis qu’elle était linéairement modulée par la valeur du potentiel redox hépatique. Conclusion : Nos résultats suggèrent que l’ascorbylperoxyde est l’agent actif de la NP conduisant au développement de la DBP. Ainsi la correction des bas niveaux de glutathion induits par les peroxydes de la NP favorise la détoxification des peroxydes et la correction du potentiel redox pulmonaire ; ce qui a protégé les poumons des effets délétères de la NP en outrepassant l’inhibition de la MAT hépatique. Nos résultats sont d'une grande importance car ils donnent de l'espoir pour une prévention possible de la DBP.

Chemical composition and solubility of ocean phosphatized rocks in seawater

In order to elucidate possibility of limestone phosphatization during contact with seawater two sets of experiments were carried out: that of solubility of natural phosphates in seawater and that of deposition of phosphorus onto calcareous phase. Concentration of phosphorus in seawater used for solubility experiments varied from 39 to 338 µ/l, temperature was 5.5-17.5°C and pH 7.8-7.9. The lowest solubility was characteristic of ancient crystallized samples. The deposition experiments showed that in case when concentration of dissolved phosphate in seawater reaches 3 mg/l it might be sorbed on solid CaCO3 phase without forming its own mineral. The latter is able to form rapidly but only if magnesium is not present in solution. In magnesium-free water calcium phosphates precipitate when concentration of dissolved phosphorus is higher than 0.9-1.2 mg/l. These results show that phosphatization of limestones in marine environment takes place during their contact with pore water but not with marine bottom water.

Total organic carbon, metal concentrations and metal and aluminium ratios in bulk sediment from the ODP sample 169-1033B-4H-4,54-74

Holocene laminated sediments in Saanich Inlet, British Columbia, are interrupted by frequent, non-laminated, massive layers. These layers may be debris flows released by earthquakes or bioturbated sediments deposited during periods of relatively high bottom water oxygen concentration and/or low surface productivity, or both. We determined the organic carbon content and the concentration of a suite of redox-sensitive metals in bulk sediments at approximately 1-cm resolution across a laminated-massive-laminated interval (ODP Leg 169S Sample 1033B-4H-4,54-74), to determine the redox conditions under which the massive layer was deposited. Our results indicate that this massive interval was deposited under anoxic bottom waters. Manganese/Al ratios are consistently low throughout the massive section, while Mo/Al, Cd/Al, Re/Al, and U/Al ratios are enriched relative to their metal/Al ratios in detrital material (represented by Cowichan River suspended sediments). The concentration of organic carbon in the lower portion of the massive layer is higher than in the upper portion, which has a concentration similar to that in the overlying and underlying laminated sediments. Well-defined peaks in Mo/Al, Cd/Al, and Re/Al and a broad peak in U/Al occur in the lower portion of the massive layer. The positions of the Cd/Al, Re/Al, and Mo/Al peaks, as well as the increase in organic carbon content with depth in the massive layer, are best explained by a process of diagenetic redistribution of metals that occurred after the massive layer was emplaced.

Composition of organic matter in bottom sediments from the Antarctic sector of the Atlantic Ocean

We identify geochemical features of sedimentary organic matter in various morphostructural zones of the Antarctic sector of the Atlantic. We present background geochemical organic parameters for shelf and deep-sea sediments from the Weddell and Scotia Seas and the Bransfield Strait. Geochemical organic parameters are good indicators of environmental and facial variations in sediments and could be used for environmental monitoring of the World Ocean.

Organic carbon, reduced sulfur, and iron in Miocene to Holocene sediments from the Oman and Beguela upwelling systems

We examined sediments from Neogene and Quaternary sections of the Benguela and Oman upwelling systems (DSDP Site 532, ODP Sites 723 and 722) to determine environmental and geochemical factors which control and limit pyrite formation in organic-carbon-rich marine sediments. Those samples from the upwelling sites, which contained low to moderate concentrations of total organic carbon (0.7%-3%), had C/S ratios typical of normal marine sediments, i.e., around 2.8. In these sediments, TOC availability probably limited pyrite formation. Results that do not conform with accepted models were found for the sediments high in TOC (3^0-12.4%). The organic matter was of marine origin and contained considerable pyrolytic hydrocarbons, a fact that we take as a sign of low degradation, yet significant concentrations of dissolved sulfate coexisted with it (> 5 mmol/L in the case of Sites 532 and 723). Detrital iron was probably not limiting in either case, because the degree of pyritization was always less than 0.65. Therefore, controls on sulfate reduction and pyrite formation in the organic matter-rich sediments do not appear to conform simply to generally accepted diagenetic models. The data from these thermally immature, old, and organic-rich marine sediments imply that (1) the total reduced sulfur content of organic-rich marine upwelling sediments rarely exceeds an approximate boundary of 1.5% by weight, (2) the C/S ratio of these sediments is not constant and usually much higher than the empirical values proposed for marine sediments. We conclude that sedimentary pyrite formation in upwelling sediments is limited by an as yet unknown factor, and that caution is advised in using C/S ratios and C vs. S diagrams in paleoenvironmental reconstructions for organic-rich sediments.

Organic compounds in surface sediments from the Pakistan continental margin

In order to assess whether the oxygen-minimum zone (OMZ) in the Arabian sea has an effect on the preservation and composition of organic matter in surface sediments we investigated samples from three different transects on the Pakistan continental margin across the OMZ. In addition to determining the total amount of organic carbon (TOC), we analyzed the extractable lipids by gas chromatography, combined gas chromatography/mass spectrometry, and compound-specific stable carbon isotope measurements. The extractable lipids are dominated by marine organic matter as indicated by the abundance of lipids typical of marine biota and by the bulk and molecular isotopic composition. Sediments from within the OMZ are enriched in organic carbon and in several extractable lipids (i.e. phytol, n-alcohols, total sterols, n-C35 alkane) relative to stations above and below this zone. Other lipid concentrations, such as those of total n-fatty acids and total n-alkanes fail to show any relation to the OMZ. Only a weak correlation of TOC with mineral surface area was found in sediments deposited within the OMZ. In contrast, sediments from outside the OMZ do not show any relationship between TOC and surface area. Among the extractable lipids, only the n-alkane concentration is highly correlated with surface area in sediments from the Hab and Makran transects. In sediments from outside the OMZ, the phytol and sterol concentrations are also weakly correlated with mineral surface area. The depositional environment of the Indus Fan offers the best conditions for an enhanced preservation of organic matter. The OMZ, together with the undisturbed sedimentation at moderate rates, seems to be mainly responsible for the high TOC values in this area. Overall, the type of organic matter and its lability toward oxic degradation, the mineral surface area, the mineral composition, and possibly the secondary productivity by (sedimentary) bacteria also appear to have an influence on organic matter accumulation and composition.

Ion-trapping, microsomal binding, and unbound drug distribution in the hepatic retention of basic drugs

This study investigated the relative contribution of ion-trapping, microsomal binding, and distribution of unbound drug as determinants in the hepatic retention of basic drugs in the isolated perfused rat liver. The ionophore monensin was used to abolish the vesicular proton gradient and thus allow an estimation of ion-trapping by acidic hepatic vesicles of cationic drugs. In vitro microsomal studies were used to independently estimate microsomal binding and metabolism. Hepatic vesicular ion-trapping, intrinsic elimination clearance, permeability-surface area product, and intracellular binding were derived using a physiologically based pharmacokinetic model. Modeling showed that the ion-trapping was significantly lower after monensin treatment for atenolol and propranolol, but not for antipyrine. However, no changes induced by monensin treatment were observed in intrinsic clearance, permeability, or binding for the three model drugs. Monensin did not affect binding or metabolic activity in vitro for the drugs. The observed ion-trapping was similar to theoretical values estimated using the pHs and fractional volumes of the acidic vesicles and the pK(a) values of drugs. Lipophilicity and pK(a) determined hepatic drug retention: a drug with low pK(a) and low lipophilicity (e.g., antipyrine) distributes as unbound drug, a drug with high pK(a) and low lipophilicity (e.g., atenolol) by ion-trapping, and a drug with a high pK(a) and high lipophilicity (e.g., propranolol) is retained by ion-trapping and intracellular binding. In conclusion, monensin inhibits the ion-trapping of high pK(a) basic drugs, leading to a reduction in hepatic retention but with no effect on hepatic drug extraction.

Experimental study of phase equilibria in the Al-Fe-Zn-O system in air

The phase equilibria in the Al-Fe-Zn-O system in the range 1250 °C to 1695 °C in air have been experimentally studied using equilibration and quenching techniques followed by electron probe X-ray microanalysis. The phase diagram of the binary Al2O3-ZnO system and isothermal sections of the Al2O3-“Fe2O3”-ZnO system at 1250 °C, 1400 °C, and 1550 °C have been constructed and reported for the first time. The extents of solid solutions in the corundum (Al,Fe)2O3, hematite (Fe,Al)2O3, Al2O3*Fe2O3 phase (Al,Fe)2O3, spinel (Al,Fe,Zn)O4, and zincite (Al,Zn,Fe)O primary phase fields have been measured. Corundum, hematite, and Al2O3*Fe2O3 phases dissolve less than 1 mol pct zinc oxide. The limiting compositions of Al2O3*Fe2O3 phase measured in this study at 1400 °C are slightly nonstoichiometric, containing more Al2O3 then previously reported. Spinel forms an extensive solid solution in the Al2O3-“Fe2O3”-ZnO system in air with increasing temperature. Zincite was found to dissolve up to 7 mole pct of aluminum in the presence of iron at 1550 °C in air. A meta-stable Al2O3-rich phase of the approximate composition Al8FeZnO14+x was observed at all of the conditions investigated. Aluminum dissolved in the zincite in the presence of iron appears to suppress the transformation from a round to platelike morphology.

Solvent extraction of phosphoric acid

This work investigated the purification of phosphoric acid using a suitable organic solvent, followed by re-extraction of the acid from the solvent using water. The work consisted of practical batch and continuous studies and the economics and design of a full scale plant, based on the experimental data. A comprehensive literature survey on the purification of wet process phosphoric acid by organic solvents is presented and the literature describing the design and operation of mixer-settlers has also been reviewed. In batch studies, the equilibrium and distribution curves for the systems water-phosphoric acid-solvent for Benzaldehyde, Cyclohexanol and Methylisobutylketone (MIBK) were determined together with hydrodynamic characteristics for both pure and impure systems. The settling time increased with acid concentration, but power input had no effect. Drop size was found to reduce with acid concentration and power input. For the continuous studies a novel horizontal mixer~settler cascade was designed, constructed and operated using pure and impure acid with MIBK as the solvent. The cascade incorporates three air turbine agitated, cylindrical 900 ml mixers, and three cylindrical 200 ml settlers with air-lift solvent interstage transfer. Mean drop size in the fully baffled mixer was correlated. Drop size distributions were log-normal and size decreased with acid concentration and power input and increased with dispersed phase hold-up. Phase inversion studies showed that the width of the ambivalent region depended upon rotor speed, hold-up and acid concentration. Settler characteristics were investigated by measuring wedge length. Distribution coefficients of impurities and acid were also investigated. The following optimum extraction conditions were found: initial acid concentration 63%, phase ratio of solvent to acid 1:1 (v/v), impeller speed recommended 900 r.p.m. In the washing step the maximum phase ratio of solvent to water was 8:1 (v/v). Work on phosphoric acid concentration involved constructing distillation equipment consisting of a 10& spherical still. A 100 T/d scale detailed process design including capital cost, operating cost and profitability was also completed. A profit model for phosphoric acid extraction was developed and maximised. Recommendations are made for both the application of the results to a practical design and for extensions of the study.

Strategic and operational risk in an international collaboration agency: a knowledge management solution

The International Cooperation Agency (identified in this article as IDEA) working in Colombia is one of the most important in Colombian society with programs that support gender rights, human rights, justice and peace, scholarships, aboriginal population, youth, afro descendants population, economic development in communities, and environmental development. The identified problem is based on the diversified offer of services, collaboration and social intervention which requires diverse groups of people with multiple agendas, ways to support their mandates, disciplines, and professional competences. Knowledge creation and the growth and sustainability of the organization can be in danger because of a silo culture and the resulting reduced leverage of the separate group capabilities. Organizational memory is generally formed by the tacit knowledge of the organization members, given the value of accumulated experience that this kind of social work implies. Its loss is therefore a strategic and operational risk when most problem interventions rely on direct work in the socio-economic field and living real experiences with communities. The knowledge management solution presented in this article starts first, with the identification of the people and groups concerned and the creation of a knowledge map as a means to strengthen the ties between organizational members; second, by introducing a content management system designed to support the documentation process and knowledge sharing process; and third, introducing a methodology for the adaptation of a Balanced Scorecard based on the knowledge management processes. These three main steps lead to a knowledge management “solution” that has been implemented in the organization, comprising three components: a knowledge management system, training support and promotion of cultural change.