物体朝向对场景内在参照系建立的影响

Six experiments tested how headings of objects in scenes influenced the construction for the intrinsic frame of reference under different structure and viewpoint amount conditions. In Experiment 1 and 2, participants stood at 0 degree and learned an asymmetrical scene and a symmetrical scene that were composed by balls with no apparent headings separately. In Experiment 3, 4, 5 and 6, toys with apparent headings were used and they all faced the 315 degree of the scene. In Experiment 3 and 4, participants stood at 0 degree and learned an asymmetrical scene and a symmetrical scene that were composed by toys separately. In Experiment 5 and 6, participants stood at 0 and 315 degree and learned an asymmetrical scene and a symmetrical scene that were composed by toys separately. After learning, participants needed to finish triplet recognition tasks in all the experiments. The dependent measures were response latency and accuracy. The correct response latencies to the targets were analyzed by ANOVA. Accuracy was used to filter data and analyzed in an ANOVA in some experiments as a reference. Results indicate that headings of objects in scenes influence the pattern for intrinsic frame of reference. The structure of scene affects the acting mechanism of heading, but the amount of viewpoints does not have this effect. If the objects in scenes have no apparent headings, there will be viewpoint dependent effect and the advantage of symmetry axis as intrinsic axis in triplet recognition tasks. If the objects in scenes have apparent headings, people’s spatial memory pattern will be affected by objects’ headings. If the heading of objects (315 degree) is not parallel to the viewpoint (0 degree) in an asymmetrical scene, people will be inclined to represent the scene from the heading of objects but not from the viewpoint. As a result, the viewpoint dependent effect will disappear, and there is significant advantage for the triplets presented from heading of objects. If the heading of objects is not parallel to the symmetry axis in a symmetrical scene, people will represent the scene not only according to the symmetry axis as intrinsic axis, but also according to the heading of objects. As a result, the significant advantage for symmetry axis as intrinsic axis in triplet recognition tasks will disappear but there will be still a tendency. By contrast, the effect for the headings of objects is more significant in asymmetrical scenes than that in symmetrical scenes.

Photoelectron spectroscopy of ammonia via a fast predissociative state

We report a study on resonance enhanced multiphoton ionization photoelectron spectroscopy (REMPI-PES) involving the fast predissociative (A) over tilde state of ammonia, using nano- and femtosecond lasers. The multiphoton scheme involves (1 + 1), (2 + 2), (2 + 2) + 1 and (2 + 2) + 2 photon processes. We have found a progression of stretching vibrations nu(1) in the PE spectrum when pumping NH3 (A) over tilde upsilon(2) = 0, 1 and 3 as intermediate states. The stretching vibration intensity distributions in the photoelectron spectrum are calculated by using the Chebychev method of the wavepacket propagation. The femtosecond spectrum shows a similar feature to the nanosecond spectrum. However, high laser power also causes band broadening and shifting effect as well as above threshold multiphoton ionization.

How Could We Explore the Terrorist Issue?

The problem of terrorism can be analyzed by means of a wide array of research theories and models. There is however a question which of these may be regarded as especially useful to analyze different aspects of terrorism such as its reasons, characteristics and effects. Among concepts or theories which more or less fulfill the above-mentioned requirements, one can mention: chaos theory, decision theory, spatial competition theory, exchange theory, black box theory, theory of disaster, system model, model of billiard balls, core model, asymmetrical model, network model or concept of hybridity.

Phase estimation receiver for full-field detection: a novel receiver structure for electronic dispersion compensation of metropolitan area networks

The development of ultra high speed (~20 Gsamples/s) analogue to digital converters (ADCs), and the delayed deployment of 40 Gbit/s transmission due to the economic downturn, has stimulated the investigation of digital signal processing (DSP) techniques for compensation of optical transmission impairments. In the future, DSP will offer an entire suite of tools to compensate for optical impairments and facilitate the use of advanced modulation formats. Chromatic dispersion is a very significant impairment for high speed optical transmission. This thesis investigates a novel electronic method of dispersion compensation which allows for cost-effective accurate detection of the amplitude and phase of the optical field into the radio frequency domain. The first electronic dispersion compensation (EDC) schemes accessed only the amplitude information using square law detection and achieved an increase in transmission distances. This thesis presents a method by using a frequency sensitive filter to estimate the phase of the received optical field and, in conjunction with the amplitude information, the entire field can be digitised using ADCs. This allows DSP technologies to take the next step in optical communications without requiring complex coherent detection. This is of particular of interest in metropolitan area networks. The full-field receiver investigated requires only an additional asymmetrical Mach-Zehnder interferometer and balanced photodiode to achieve a 50% increase in EDC reach compared to amplitude only detection.

The politics of hazard: imminent critique and deconstruction of ecological modernisation in Ireland

This dissertation sets out to provide immanent critique and deconstruction of ecological modernisation or ecomodernism.It does so, from a critical social theory approach, in order to correctly address the essential issues at the heart of the environmental crisis that ecomodernism purports to address. This critical approach argues that the solution to the environmental crisis can only be concretely achieved by recognising its root cause as being foremost the issue of material interaction between classes in society, and not simply between society and nature in any structurally meaningful way. Based on a metaphysic of false dualism, ecological modernisation attributes a materiality of exchange value relations to issues of society, while simultaneously offering a non- material ontology to issues of nature. Thus ecomodernism serves asymmetrical relations of power whereby, as a polysemic policy discourse, it serves the material interests of those who have the power to impose abstract interpretations on the materiality of actual phenomena. The research of this dissertation is conducted by the critical evaluation of the empirical data from two exemplary Irish case studies. Discovery of the causal processes of the various public issues in the case studies and thereafter the revelation of the meaning structures under- pinning such causal processes, is a theoretically- driven task requiring analysis of those social practices found in the cognitive, cultural and structural constitutions respectively of actors, mediations and systems.Therefore, the imminent critique of the case study paradigms serves as a research strategy for comprehending Ireland’s nature- society relations as influenced essentially by a systems (techno- corporatist) ecomodernist discourse. Moreover, the deconstruction of this systems ideological discourse serves not only to demonstrate how weak ecomodernism practically undermines its declared ecological objectives, but also indicates how such objectives intervene as systemic contradictions at the cultural heart of Ireland’s late modernisation.

Ab initio calculations of group 4 metallocene reaction mechanisms: atomic layer deposition and bond activation catalysis

Thin film dielectrics based on titanium, zirconium or hafnium oxides are being introduced to increase the permittivity of insulating layers in transistors for micro/nanoelectronics and memory devices. Atomic layer deposition (ALD) is the process of choice for fabricating these films, as it allows for high control of composition and thickness in thin, conformal films which can be deposited on substrates with high aspect-ratio features. The success of this method depends crucially on the chemical properties of the precursor molecules. A successful ALD precursor should be volatile, stable in the gas-phase, but reactive on the substrate and growing surface, leading to inert by-products. In recent years, many different ALD precursors for metal oxides have been developed, but many of them suffer from low thermal stability. Much promise is shown by group 4 metal precursors that contain cyclopentadienyl (Cp = C5H5-xRx) ligands. One of the main advantages of Cp precursors is their thermal stability. In this work ab initio calculations were carried out at the level of density functional theory (DFT) on a range of heteroleptic metallocenes [M(Cp)4-n(L)n], M = Hf/Zr/Ti, L = Me and OMe, in order to find mechanistic reasons for their observed behaviour during ALD. Based on optimized monomer structures, reactivity is analyzed with respect to ligand elimination. The order in which different ligands are eliminated during ALD follows their energetics which was in agreement with experimental measurements. Titanocene-derived precursors, TiCp*(OMe)3, do not yield TiO2 films in atomic layer deposition (ALD) with water, while Ti(OMe)4 does. DFT was used to model the ALD reaction sequence and find the reason for the difference in growth behaviour. Both precursors adsorb initially via hydrogen-bonding. The simulations reveal that the Cp* ligand of TiCp*(OMe)3 lowers the Lewis acidity of the Ti centre and prevents its coordination to surface O (densification) during both of the ALD pulses. Blocking this step hindered further ALD reactions and for that reason no ALD growth is observed from TiCp*(OMe)3 and water. The thermal stability in the gas phase of Ti, Zr and Hf precursors that contain cyclopentadienyl ligands was also considered. The reaction that was found using DFT is an intramolecular α-H transfer that produces an alkylidene complex. The analysis shows that thermal stabilities of complexes of the type MCp2(CH3)2 increase down group 4 (M = Ti, Zr and Hf) due to an increase in the HOMO-LUMO band gap of the reactants, which itself increases with the electrophilicity of the metal. The reverse reaction of α-hydrogen abstraction in ZrCp2Me2 is 1,2-addition reaction of a C-H bond to a Zr=C bond. The same mechanism is investigated to determine if it operates for 1,2 addition of the tBu C-H across Hf=N in a corresponding Hf dimer complex. The aim of this work is to understand orbital interactions, how bonds break and how new bonds form, and in what state hydrogen is transferred during the reaction. Calculations reveal two synchronous and concerted electron transfers within a four-membered cyclic transition state in the plane between the cyclopentadienyl rings, one π(M=X)-to-σ(M-C) involving metal d orbitals and the other σ(C-H)-to-σ(X-H) mediating the transfer of neutral H, where X = C or N. The reaction of the hafnium dimer complex with CO that was studied for the purpose of understanding C-H bond activation has another interesting application, namely the cleavage of an N-N bond and resulting N-C bond formation. Analysis of the orbital plots reveals repulsion between the occupied orbitals on CO and the N-N unit where CO approaches along the N-N axis. The repulsions along the N-N axis are minimized by instead forming an asymmetrical intermediate in which CO first coordinates to one Hf and then to N. This breaks the symmetry of the N-N unit and the resultant mixing of MOs allows σ(NN) to be polarized, localizing electrons on the more distant N. This allowed σ(CO) and π(CO) donation to N and back-donation of π*(Hf2N2) to CO. Improved understanding of the chemistry of metal complexes can be gained from atomic-scale modelling and this provides valuable information for the design of new ALD precursors. The information gained from the model decomposition pathway can be additionally used to understand the chemistry of molecules in the ALD process as well as in catalytic systems.

Development of inversion-mode and junctionless Indium-Gallium-Arsenide MOSFETs

This PhD covers the development of planar inversion-mode and junctionless Al2O3/In0.53Ga0.47As metal-oxidesemiconductor field-effect transistors (MOSFETs). An implant activation anneal was developed for the formation of the source and drain (S/D) of the inversionmode MOSFET. Fabricated inversion-mode devices were used as test vehicles to investigate the impact of forming gas annealing (FGA) on device performance. Following FGA, the devices exhibited a subthreshold swing (SS) of 150mV/dec., an ION/IOFF of 104 and the transconductance, drive current and peak effective mobility increased by 29%, 25% and 15%, respectively. An alternative technique, based on the fitting of the measured full-gate capacitance vs gate voltage using a selfconsistent Poisson-Schrödinger solver, was developed to extract the trap energy profile across the full In0.53Ga0.47As bandgap and beyond. A multi-frequency inversion-charge pumping approach was proposed to (1) study the traps located at energy levels aligned with the In0.53Ga0.47As conduction band and (2) separate the trapped charge and mobile charge contributions. The analysis revealed an effective mobility (μeff) peaking at ~2850cm2/V.s for an inversion-charge density (Ninv) = 7*1011cm2 and rapidly decreasing to ~600cm2/V.s for Ninv = 1*1013 cm2, consistent with a μeff limited by surface roughness scattering. Atomic force microscopy measurements confirmed a large surface roughness of 1.95±0.28nm on the In0.53Ga0.47As channel caused by the S/D activation anneal. In order to circumvent the issue relative to S/D formation, a junctionless In0.53Ga0.47As device was developed. A digital etch was used to thin the In0.53Ga0.47As channel and investigate the impact of channel thickness (tInGaAs) on device performance. Scaling of the SS with tInGaAs was observed for tInGaAs going from 24 to 16nm, yielding a SS of 115mV/dec. for tInGaAs = 16nm. Flat-band μeff values of 2130 and 1975cm2/V.s were extracted on devices with tInGaAs of 24 and 20nm, respectively

FT-jet spectroscopy: vibrational energy transfer in N2O

A set-up combining a high resolution Fourier transform interferometer and a quadrupole mass spectrometer with a supersonic jet expansion produced thanks to a large turbomolecular pumping unit is described. A rotational temperature close to 3 K is demonstrated. Vibration-vibration energy transfer in the expansion affecting the v2 = 1 state in N2O is monitored in the presence of various collision partners. The transfer from the v 2 = 1 state of N2O towards the quasi resonant, lower energy v2 = 1 state of OCS is demonstrated, in particular. © 2005 Elsevier B.V. All rights reserved.

Changes in landing mechanics in patients following anterior cruciate ligament reconstruction when wearing an extension constraint knee brace.

BACKGROUND: Anterior cruciate ligament (ACL) reconstruction is associated with a high incidence of second tears (graft tears and contralateral ACL tears). These secondary tears have been attributed to asymmetrical lower extremity mechanics. Knee bracing is one potential intervention that can be used during rehabilitation that has the potential to normalize lower extremity asymmetry; however, little is known about the effect of bracing on movement asymmetry in patients following ACL reconstruction. HYPOTHESIS: Wearing a knee brace would increase knee joint flexion and joint symmetry. It was also expected that the joint mechanics would become more symmetrical in the braced condition. OBJECTIVE: To examine how knee bracing affects knee joint function and symmetry over the course of rehabilitation in patients 6 months following ACL reconstruction. STUDY DESIGN: Controlled laboratory study. LEVEL OF EVIDENCE: Level 3. METHODS: Twenty-three adolescent patients rehabilitating from ACL reconstruction surgery were recruited for the study. The subjects all underwent a motion analysis assessment during a stop-jump activity with and without a functional knee brace on the surgical side that resisted extension for 6 months following the ACL reconstruction surgery. Statistical analysis utilized a 2 × 2 (limb × brace) analysis of variance with a significant alpha level of 0.05. RESULTS: Subjects had increased knee flexion on the surgical side when they were braced. The brace condition increased knee flexion velocity, decreased the initial knee flexion angle, and increased the ground reaction force and knee extension moment on both limbs. Side-to-side asymmetry was present across conditions for the vertical ground reaction force and knee extension moment. CONCLUSION: Wearing a knee brace appears to increase lower extremity compliance and promotes normalized loading on the surgical side. CLINICAL RELEVANCE: Knee extension constraint bracing in postoperative ACL patients may improve symmetry of lower extremity mechanics, which is potentially beneficial in progressing rehabilitation and reducing the incidence of second ACL tears.

ANALYSIS AND SIMULATION OF ENERGY USE AND COST AT A MUNICIPAL WASTEWATER TREATMENT PLANT

The cost of electricity, a major operating cost of municipal wastewater treatment plants, is related to influent flow rate, power price, and power load. With knowledge of inflow and price patterns, plant operators can manage processes to reduce electricity costs. Records of influent flow, power price, and load are evaluated for Blue Plains Advanced Wastewater Treatment Plant. Diurnal and seasonal trends are analyzed. Power usage is broken down among treatment processes. A simulation model of influent pumping, a large power user, is developed. It predicts pump discharge and power usage based on wet-well level. Individual pump characteristics are tested in the plant. The model accurately simulates plant inflow and power use for two pumping stations [R2 = 0.68, 0.93 (inflow), R2 =0.94, 0.91(power)]. Wet-well stage-storage relationship is estimated from data. Time-varying wet-well level is added to the model. A synthetic example demonstrates application in managing pumps to reduce electricity cost.

Computer vision tools for the non-invasive assessment of autism-related behavioral markers

The early detection of developmental disorders is key to child outcome, allowing interventions to be initiated that promote development and improve prognosis. Research on autism spectrum disorder (ASD) suggests behavioral markers can be observed late in the first year of life. Many of these studies involved extensive frame-by-frame video observation and analysis of a child's natural behavior. Although non-intrusive, these methods are extremely time-intensive and require a high level of observer training; thus, they are impractical for clinical and large population research purposes. Diagnostic measures for ASD are available for infants but are only accurate when used by specialists experienced in early diagnosis. This work is a first milestone in a long-term multidisciplinary project that aims at helping clinicians and general practitioners accomplish this early detection/measurement task automatically. We focus on providing computer vision tools to measure and identify ASD behavioral markers based on components of the Autism Observation Scale for Infants (AOSI). In particular, we develop algorithms to measure three critical AOSI activities that assess visual attention. We augment these AOSI activities with an additional test that analyzes asymmetrical patterns in unsupported gait. The first set of algorithms involves assessing head motion by tracking facial features, while the gait analysis relies on joint foreground segmentation and 2D body pose estimation in video. We show results that provide insightful knowledge to augment the clinician's behavioral observations obtained from real in-clinic assessments.

A study of modelling approaches for rail vehicle collision behaviour

A rigid wall model has been used widely in the numerical simulation of rail vehicle impacts. Finite element impact modelling of rail vehicles is generally based on a half-width and full-length or half-length structure, depending on the symmetry. The structure and components of rail vehicles are normally designed to cope with proof loading to ensure adequate ride performance. In this paper, the authors present a study of a rail vehicle with driving cab focused on improving the modelling approach and exploring the intrinsic structural weaknesses to enhance its crashworthiness. The underpinning research used finite element analysis and compared the behaviour of the rail vehicle in different impact scenarios. It was found that the simulation of a rigid wall impact can mask structural weaknesses; that even a completely symmetrical impact may lead to an asymmetrical result; that downward bending is an intrinsic weakness of conventional rail vehicles and that a rigid part of the vehicle structure, such as the body bolster, may cause uncoordinated deformation and shear fracture between the vehicle sections. These findings have significance for impact simulation, the full-scale testing of rail vehicles and rail vehicle design in general.

Heterospecific mating and species recognition in the planktonic marine copepods Temora stylifera and T. longicornis

Many planktonic copepods use diffusible pheromone or hydromechanical signals to remotely detect the presence of potential mates. To determine whether these mating signals also play a role in species recognition and mate choice, we observed and video recorded (3D) mate-finding and pursuit behaviors in heterospecific and conspecific mating crosses in a pair of congeneric, partially sympatric species (Temora stylifera and T. longicornis) in the laboratory. The species appear to have asymmetrical pre-mating isolation, with T. longicornis males readily pursuing T. stylifera females to mate contact and capture, but with little mate-finding activity observed in the reverse cross. Males of T. longicornis pursuing heterospecific females executed a number of behaviors known to facilitate successful pheromone trail following and mate capture in conspecific mating, including accelerated swimming in a ‘signal-scanning’ mode to recover a lost pheromone trail, reversal of the tracking direction in cases when the male initiated tracking in the incorrect direction, and accelerated swimming speeds when in the presence of a pheromone signal but prior to locating the trail. Detailed analyses of mate-tracking behavior in T. longicornis male × T. stylifera female crosses gave no indication that males were aware they were pursuing heterospecific females prior to mate contact, indicating that diffusible pheromone and hydromechanical signals are not used, either singly or in combination, for species recognition in this mating pair. Heterospecific mating attempts among sympatric, congeneric copepods may commonly proceed to mate capture, and incur fitness costs to either or both mating partners.

Monitoring marine plankton ecosystems: Identification of the most relevant indicators of the state of an ecosystem

The number of variables involved in the monitoring of an ecosystem can be high and often one of the first stages in the analysis is to reduce the number of variables. We describe a method developed for geological purposes, using the information theory, that enables selection of the most relevant variables. This technique also allows the examination of the asymmetrical relationships between variables. Applied to a set of physical and biological variables (plankton assemblages in four areas of the North Sea), the method shows that biological variables are more informative than physical variables although the controlling factors are mainly physical (sea surface temperature in winter and spring). Among biological variables, diversity measures and warm-water species assemblages are informative for the state of the North Sea pelagic ecosystems while among physical variables sea surface temperature in late winter and early spring are highly informative. Although often used in bioclimatology, the utilisation of the North Atlantic Oscillation (NAO) index does not seem to provide a lot of information. The method reveals that only the extreme states of this index has an influence on North Sea pelagic ecosystems. The substantial and persistent changes that were detected in the dynamic regime of the North Sea ecosystems and called regime shift are detected by the method and corresponds to the timing of other shifts described in the literature for some European Systems such as the Baltic and the Mediterranean Sea when both physical and biological variables are considered.

Zooplankton associations in a Mediterranean long-term time-series

Coastal zooplankton have been investigated since 1984 at a Long Term Ecological Research station MC (LTER-MC) in the inner Gulf of Naples (Tyrrhenian Sea, Western Mediterranean). The sampling site, located between the littoral and the open sea systems, has very active hydrography that affects plankton communities. The present work was aimed at establishing whether, in such a dynamic and variable environment, species associations and homogeneous periods could be identified as characteristic and stable features of the mesozooplankton over the period 1984–2006. Hierarchical clustering was applied to assess species associations based on a matrix of similarities between species (R-mode), and homogeneous periods based on a matrix of similarities between observations (Q-mode). The Indicator Value index [IndVal, Dufrene and Legendre (1997) Species assemblages and indicator species: the need for a flexible asymmetrical approach. Ecol. Monogr., 67, 345–366] was calculated to identify species characterizing each period. Five taxonomic groups with well-defined composition and abundance were identified as robust associations that likely reflect different modes of community functioning. The temporal course of these associations was largely shaped by strong seasonal forcing comprising both physical and biological (e.g. trophic) signals. These associations persisted over the long term, thus indicating some stable characters in the Naples zooplankton time-series, providing evidence of resilience in communities in highly variable coastal conditions.