Acidentes ocupacionais por exposição a material biológico entre a equipe multiprofissional do atendimento pré-hospitalar

Estudo transversal, tipo survey, realizado com a equipe multiprofissional de Atendimento Pré-hospitalar (APh) de Belo Horizonte, entre junho e dezembro de 2006. Objetivou-se determinar a incidência dos acidentes ocupacionais por exposição a material biológico, condutas pós-acidente, e fatores demográficos determinantes. Utilizou-se questionário estruturado, análise descritiva, cálculo de incidências e regressão logística. A incidência de acidentes com material biológico foi de 20,6%: 40,8% por pérfuro-cortantes e 49,0% por fluidos corporais; 35,3% entre médicos e 24,0% entre enfermeiros. Condutas pós-acidente: sem avaliação médica, 63,3%; subnotificação, 81,6%; nenhuma conduta, 55,0%; e, sem acompanhamento sorológico, 61,2%. Estiveram associados ao acidente: tempo na instituição (Odds ratio-OR 2,84; Intervalo de confiança-IC 95% 1,22-6,62), lotação na Unidade de Suporte Avançado (OR 4,18; IC 95% 1,64-10,64); interação: tempo na instituição e lotação na Unidade de Suporte Básico (OR 0,27; IC 95% 0,07-1,00). Sugere-se a implantação de protocolos pós-acidentes, visando a sua redução; a subnotificação e o aumento do acompanhamento pós-acidente.

General practitioners can evaluate the material, social and health dimensions of patient social status

OBJECTIVE: To identify which physician and patient characteristics are associated with physicians' estimation of their patient social status.DESIGN: Cross-sectional ulticentric survey. SETTING: Fourty-seven primary care private offices in Western Switzerland. PARTICIPANTS: Random sample of 2030 patients ≥ 16, who encountered a general practitioner (GP) between September 2010 and February 2011. MAIN MEASURES: PRIMARY OUTCOME: patient social status perceived by GPs, using the MacArthur Scale of Subjective Social Status, ranging from the bottom (0) to the top (10) of the social scale.Secondary outcome: Difference between GP's evaluation and patient's own evaluation of their social status. Potential patient correlates: material and social deprivation using the DiPCare-Q, health status using the EQ-5D, sources of income, and level of education. GP characteristics: opinion regarding patients' deprivation and its influence on health and care. RESULTS: To evaluate patient social status, GPs considered the material, social, and health aspects of deprivation, along with education level, and amount and type of income. GPs declaring a frequent reflexive consideration of their own prejudice towards deprived patients, gave a higher estimation of patients' social status (+1.0, p = 0.002). Choosing a less costly treatment for deprived patients was associated with a lower estimation (-0.7, p = 0.002). GP's evaluation of patient social status was 0.5 point higher than the patient's own estimate (p<0.0001). CONCLUSIONS: GPs can perceive the various dimensions of patient social status, although heterogeneously, according partly to their own characteristics. Compared to patients' own evaluation, GPs overestimate patient social status.

Validação de material informativo a pacientes em tratamento quimioterápico e aos seus familiares

O objetivo deste estudo foi a validação do conteúdo e a compreensibilidade do Material informativo a pacientes em tratamento quimioterápico e aos seus familiares. Para avaliar se as informações do material informativo sobre câncer, quimioterapia, cuidados com paciente, alimentação e medicação eram suficientemente esclarecedoras e claras, foram contatados 23 cuidadores principais de crianças com câncer. Os entrevistados responderam a um questionário contendo nove questões fechadas e uma aberta. A avaliação foi positiva e as informações foram consideradas esclarecedoras pela maioria dos participantes, dos quais alguns contribuíram com sugestões, que foram acrescentadas ao material. Após completa finalização, o material servirá como apoio aos pacientes com câncer e aos familiares. O intuito do material é melhorar a qualidade de assistência de enfermagem, pois acredita-se que, quando os responsáveis estão orientados sobre a maneira mais adequada de cuidar, a adesão do paciente ao tratamento aumenta, a informação os torna mais seguros, e colabora-se para o sucesso do tratamento.

Influence of physico-chemical material characteristics on staphylococcal biofilm formation--a qualitative and quantitative in vitro analysis of five different calcium phosphate bone grafts.

Various compositions of synthetic calcium phosphates (CaP) have been proposed and their use has considerably increased over the past decades. Besides differences in physico-chemical properties, resorption and osseointegration, artificial CaP bone graft might differ in their resistance against biofilm formation. We investigated standardised cylinders of 5 different CaP bone grafts (cyclOS, chronOS (both β-TCP (tricalcium phosphate)), dicalcium phosphate (DCP), calcium-deficient hydroxyapatite (CDHA) and α-TCP). Various physico-chemical characterisations e.g., geometrical density, porosity, and specific surface area were investigated. Biofilm formation was carried out in tryptic soy broth (TSB) and human serum (SE) using Staphylococcus aureus (ATCC 29213) and S. epidermidis RP62A (ATCC 35984). The amount of biofilm was analysed by an established protocol using sonication and microcalorimetry. Physico-chemical characterisation showed marked differences concerning macro- and micropore size, specific surface area and porosity accessible to bacteria between the 5 scaffolds. Biofilm formation was found on all scaffolds and was comparable for α-TCP, chronOS, CDHA and DCP at corresponding time points when the scaffolds were incubated with the same germ and/or growth media, but much lower for cyclOS. This is peculiar because cyclOS had an intermediate porosity, mean pore size, specific surface area, and porosity accessible to bacteria. Our results suggest that biofilm formation is not influenced by a single physico-chemical parameter alone but is a multi-step process influenced by several factors in parallel. Transfer from in vitro data to clinical situations is difficult; thus, advocating the use of cyclOS scaffolds over the four other CaP bone grafts in clinical situations with a high risk of infection cannot be clearly supported based on our data.

Estimation of inelastic seismic material properties of a surgical sea-bed from multi-component marine seismic data

To date, state-of-the-art seismic material parameter estimates from multi-component sea-bed seismic data are based on the assumption that the sea-bed consists of a fully elastic half-space. In reality, however, the shallow sea-bed generally consists of soft, unconsolidated sediments that are characterized by strong to very strong seismic attenuation. To explore the potential implications, we apply a state-of-the-art elastic decomposition algorithm to synthetic data for a range of canonical sea-bed models consisting of a viscoelastic half-space of varying attenuation. We find that in the presence of strong seismic attenuation, as quantified by Q-values of 10 or less, significant errors arise in the conventional elastic estimation of seismic properties. Tests on synthetic data indicate that these errors can be largely avoided by accounting for the inherent attenuation of the seafloor when estimating the seismic parameters. This can be achieved by replacing the real-valued expressions for the elastic moduli in the governing equations in the parameter estimation by their complex-valued viscoelastic equivalents. The practical application of our parameter procedure yields realistic estimates of the elastic seismic material properties of the shallow sea-bed, while the corresponding Q-estimates seem to be biased towards too low values, particularly for S-waves. Given that the estimation of inelastic material parameters is notoriously difficult, particularly in the immediate vicinity of the sea-bed, this is expected to be of interest and importance for civil and ocean engineering purposes.

Acidente ocupacional por material perfurocortante entre profissionais de saúde de um Centro Cirúrgico

O acidente ocupacional por material perfurocortante constitui uma preocupação para instituições e trabalhadores de saúde, devido à elevada frequência de procedimentos invasivos, e a dinâmica do trabalho. Objetivou-se identificar a incidência dos acidentes, dos materiais envolvidos, dos fatores contribuintes e das condutas tomadas pós-acidente. Participaram de um estudo transversal 127 funcionários do centro cirúrgico. Registraram-se 23,6% (30/127) acidentes com envolvimento de agulha (73,3%), lâmina de bisturi (6,7%) e eletrocautério (6,7%). Os fatores contribuintes para o acidente foram: falta de atenção (36,7%), más condições de trabalho (20,0%), descuido (13,3%), pressa (10%) e acaso/azar (6,7%). Somente 15,4% dos acidentes foram registrados. A subnotificação deveu-se à irrelevância do acidente, desconhecimento do protocolo de rotina, displicência e sobrecarga de trabalho. Os resultados alertam para a importância de se implementar estratégias para adoção/revisão de protocolos pós-acidentes, visando a redução dos acidentes e de sua subnotificação.

Gerenciamento de custos: aplicação do método de Custeio Baseado em Atividades em Centro de Material Esterilizado

Esta pesquisa exploratória descritiva, na modalidade de estudo de caso, teve por objetivo a aplicação do Custeio Baseado em Atividades (ABC) em Centro de Material e Esterilização (CME) de um hospital de ensino de capacidade extra. A coleta de dados ocorreu durante o ano de 2006, utilizando-se as técnicas de análise documental e observação direta não participante. A análise de processos possibilitou o conhecimento dos custos do ciclo/carga de desinfecção química ($9.95) e física ($12.63), e esterilização por vapor saturado sob pressão ($31.37) e por vapor de Baixa Temperatura e Formaldeído Gasoso ($255.28). As informações geradas pelo ABC resultaram na compreensão do processo gerador de custos e forneceram base para a mensuração de desempenho e melhorias de processos do CME.

Molecular taxonomy of the Formica rufa group (red wood ants) (Hymenoptera: Formicidae): a new cryptic species in the Swiss Alps?

Because of their beneficial impact on forest ecosystems, European red wood ants (Formica rufa group) are protected by law in many European countries and are considered to be among the most reliable bioindicators of forest stability. However, their taxonomy has been much debated and, unfortunately, it is too often neglected. This happens mainly because the morphology-based method for species delimitation requires lots of time and experience. We therefore employed 9 microsatellite loci and mitochondrial DNA (COI gene) to verify the power of genetic markers for red wood ant species delimitation and to investigate the cryptic diversity of these ants within the Eastern Swiss Alps. We analyzed 83 nests belonging to all red wood ant species that occur in the Swiss National Park area. Genetic data indicated that these species represent different genetic pools. Moreover, results showed that Formica aquilonia YARROW, 1955 and F. paralugubris SEIFERT, 1996 often hybridize within the Park, confirming that these two species are genetically very close and could have diverged only recently. Nevertheless, microsatellites also revealed that one entire population, located in the Minger Valley and morphologically identified as F. lugubris ZETTERSTEDT, 1838, is genetically different to all other analyzed F. lugubris populations found within the same area and to other red wood ant species. These findings, confirmed by mitochondrial DNA analyses, suggest the existence of a new cryptic species within the Eastern Swiss Alps. This putative cryptic species has been provisionally named F. lugubris-A2. These results have a great importance for future conservation plans, monitoring and evolutionary studies on these protected ants.

@neurIST infrastructure for advanced disease management through integration of heterogeneous data, computing, and complex processing services

The increasing volume of data describing humandisease processes and the growing complexity of understanding, managing, and sharing such data presents a huge challenge for clinicians and medical researchers. This paper presents the@neurIST system, which provides an infrastructure for biomedical research while aiding clinical care, by bringing together heterogeneous data and complex processing and computing services. Although @neurIST targets the investigation and treatment of cerebral aneurysms, the system’s architecture is generic enough that it could be adapted to the treatment of other diseases.Innovations in @neurIST include confining the patient data pertaining to aneurysms inside a single environment that offers cliniciansthe tools to analyze and interpret patient data and make use of knowledge-based guidance in planning their treatment. Medicalresearchers gain access to a critical mass of aneurysm related data due to the system’s ability to federate distributed informationsources. A semantically mediated grid infrastructure ensures that both clinicians and researchers are able to seamlessly access andwork on data that is distributed across multiple sites in a secure way in addition to providing computing resources on demand forperforming computationally intensive simulations for treatment planning and research.

Guiding students through competence-based educational material

Student guidance is an always desired characteristic in any educational system, butit represents special difficulty if it has to be deployed in an automated way to fulfilsuch needs in a computer supported educational tool. In this paper we explorepossible avenues relying on machine learning techniques, to be included in a nearfuture -in the form of a tutoring navigational tool- in a teleeducation platform -InterMediActor- currently under development. Since no data from that platform isavailable yet, the preliminary experiments presented in this paper are builtinterpreting every subject in the Telecommunications Degree at Universidad CarlosIII de Madrid as an aggregated macro-competence (following the methodologicalconsiderations in InterMediActor), such that marks achieved by students can beused as data for the models, to be replaced in a near future by real data directlymeasured inside InterMediActor. We evaluate the predictability of students qualifications, and we deploy a preventive early detection system -failure alert-, toidentify those students more prone to fail a certain subject such that correctivemeans can be deployed with sufficient anticipation.

Material and Construction Optimization for Prevention of Premature Pavement Distress in PCC Pavements, September 2004

The chemistry of today’s concrete mixture designs is complicated by many variables, including multiple sources of aggregate and cements and a plethora of sometimes incompatible mineral and chemical admixtures. Concrete paving has undergone significant changes in recent years as new materials have been introduced into concrete mixtures. Supplementary cementitious materials such as fly ash and ground granulated blast furnace slag are now regularly used. In addition, many new admixtures that were not even available a few years ago now have widespread usage. Adding to the complexity are construction variables such as weather, mix delivery times, finishing practices, and pavement opening schedules. Mixture materials, mix design, and pavement construction are not isolated steps in the concrete paving process. Each affects and is affected by the other in ways that determine overall pavement quality and long-term performance. Equipment and procedures commonly used to test concrete materials and concrete pavements have not changed in decades, leaving serious gaps in our ability to understand and control the factors that determine concrete durability. The concrete paving community needs tests that will adequately characterize the materials, predict interactions, and monitor the properties of the concrete.

Forças impulsoras e restritivas para trabalho em equipe em um Centro de Material e Esterilização de hospital escola

Estudo transversal descritivo exploratório que objetivou analisar forças impulsoras e restritivas para trabalho em equipe em um Centro de Material e Esterilização (CME) de um hospital escola, a partir de aproximação da Teoria de Campo de Kurt Lewin, em Goiânia, Goiás. Participaram 35 profissionais, que responderam a um questionário autoaplicável, baseado na referida teoria, que prevê que situações grupais são permeadas por forças que mobilizam positiva ou negativamente seus movimentos e dizem respeito ao envolvimento do sujeito (Eu), a interação do grupo (Outro) e ao ambiente de trabalho (Ambiente). Foi utilizada análise de conteúdo no tratamento dos dados distribuídos nas dimensões predefinidas. Os resultados consolidaram 1.990 registros, categorizados como maioria (59,3%) de forças impulsoras, predominantes na dimensão Eu. Nas dimensões Outro e Ambiente observou-se equilíbrio entre as forças. O delineamento do campo de forças permitiu uma visão objetiva, concreta das limitações, potenciais da equipe estudada e possibilidades para promover mudanças.

Research involving biological material from forensic autopsies: legal and ethical issues.

Recommendations and laws do not always contain specific and clear provisions on the use of cadaveric material in research, and even more rarely do they address explicitly the ethical issues related to research on material obtained during forensic autopsy. In this article we analyse existing legal frameworks in Europe by comparing the legal provisions in 2 European Countries which are member states of the Council of Europe, the UK and Switzerland. They were chosen because they have distinct legal frameworks that make comparisons interesting. In addition, the detailed laws of the UK and a specific law project and national ethical recommendations in Switzerland permit us to define more clearly the legal range of options for researchers using cadaveric material obtained during forensic investigations. The Human Tissue Act 2004 in England, Wales and Northern Ireland, its Scottish equivalent with the same title (2006) and the national ethical guidelines in Switzerland all require consent from the deceased person, an appropriate relative or a person with power of attorney for healthcare decisions before cadaveric biological material can be obtained and used for research. However, if the purpose of the autopsy is purely forensic, no such authorization will be sought to carry out the autopsy and related analyses, which might include genetic testing. In order to be allowed to carry out future research projects, families need to be approached for informed consent, unless the deceased person had left written directives including permission to use his or her tissues for research.

Proper Gluing of Wood, May 1988

Bonding of wood with glue dates back to ancient times but has increased enormously over the past decades. This 2 page report explains the proper way to glue wood.

Atendimento e seguimento clínico especializado de profissionais de enfermagem acidentados com material biológico

O presente trabalho trata-se de estudo de corte transversal, com objetivo de avaliar a conduta dos profissionais de enfermagem vítimas de acidentes com material biológico, do Hospital das Clínicas da Faculdade de Medicina de Ribeirão Preto da Universidade de São Paulo, no estado de São Paulo, referente ao atendimento e ao seguimento clínico especializado. A população foi composta por 1.215 profissionais de enfermagem, entrevistados entre os anos de 2010 e 2011, dos quais 636 (52,3%) sofreram acidentes com material biológico e 182 (28,6%) não procuraram atendimento no serviço especializado. O motivo mais frequentemente relatado foi atribuir pouco risco ao acidente. Assim, acredita-se que os motivos alegados pelos profissionais para não procurarem o atendimento, para não completarem a terapêutica e nem o seguimento clínico podem contribuir para a proposição de estratégias capazes de aumentar a adesão às medidas profiláticas após exposição ocupacional a material biológico.